Infopath error
I have an infopath form with secondary data connection I have enabled cross domain connection in central admin and saved the connection in udc file but my form just work on preview mode when I publish it on SharePoint it gives me an error:
any help appreciated
Hello,
Have you uploaded the UDCX file in data connection library? if not then please do so. Also make sure that UDCX file is approved in library.
If it does not helps then look at this correlation id in LOGS folder (14 hive) to get error detail.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help
Similar Messages
-
Customize infopath error message for sharepoint list
Hi Everyone,
Is there anyway of replacing the written content in the generic "InfoPath Error Message Dialog"?
I
would like to replace the written content with something that is more specific
and relevant to my formHi,
I would advice you to create data validation rule and display error message as per your requirement instead of using required fields
here are some links for your reference-
http://blog.parkercomp.com/2009/05/how-to-customize-infopath-error-dialogs.html
http://support.microsoft.com/kb/822032/en-us
http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you -
SharePoint InfoPath error SSL/TLS extern list
Hello !
I want to modify my Element display on my extern List (BDC SQL Server) with infopath but in SharePoint Designer when I click on edit the form with InfoPath I have this error message :
"Could not establish trust relationship for the SSL/TLS (secure channel)."
With the others SharePoint Lists I haven't this problem, I can modify and publish Infopath form...
Thanks for your help.
Nols.Hi Nols,
The error might be caused by SharePoint does not trust root certificates when you are trying to access external list over SSL\TLS.
Here is the link for the similar issue:
http://www.c-sharpcorner.com/uploadfile/anavijai/could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
If it does not work, please check in ULS log and find detail error message for further troubleshooting.
Regards,
Rebecca Tu
TechNet Community Support -
Has anyone seen this error before?
Error
There has been an error while loading the form.
Click Try again to attempt to load the form again. If this error persists, contact the support team for the Web site.
Click Close to exit this message.
Hide error details
The URL 710553 - Urology LBJ is an unsupported relative URL. To fix this problem, use a site-relative URL starting with '~site' or a site collection-relative URL starting with '~sitecollection'. You can also use an absolute URL.
Correlation ID:82b8719c-d16e-20fa-76a7-238f6b8ac834Hi Neish,
Can you check ULS logs for and find for "Correlation
ID:82b8719c-d16e-20fa-76a7-238f6b8ac834"
From above error it seems you embed / gave
list / site reference in InfoPath form and just provided site name, instead out relative URL starting with /sites/xxxx
Is there any spservice / webservices you are using into form to import / export data ?
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
How to customize the validation error message
Hi,
In my infopath 2010 form, when a required field is skipped, we get a very cryptic error message which is not user friendly. Can anyone please let me know how can i customize this cryptic message with a more user friendly one.
many thanks.Hello,
There is no straight solution of this problem. You may use data validation rule instead of field validation for validation so you can at least avoid that pop up error message.
Another way is, make field mandatory via code. you can just remove all field validation then check all fields data via code and cancel the submit event.
Another way is, add custom button form for submit, then hide this button until form validation is succeed.
http://blog.parkercomp.com/2009/05/how-to-customize-infopath-error-dialogs.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
In a test workflow 2013, I am getting error messages that look like the following:
'Form cannot be submitted because of an error'.
I click on the error details and it gives me the reason there is a problem. The message also says: "An entry has been added to the
Windows event log of the server. Log ID: 1234.
I am wondering if there is a way to have more user friendly error messages? If so, can you tell me how to setup the messages to be more user friendly?Hi Wendy,
check those links if they will help, first thing try the rules and data validation, other thing with code
http://blog.parkercomp.com/2009/05/how-to-customize-infopath-error-dialogs.html
http://sharepoint.stackexchange.com/questions/51408/find-out-if-validation-errors-exist-in-infopath-form
https://msdn.microsoft.com/en-us/library/office/aa942787.aspx
https://support.office.com/en-us/article/Add-rules-for-validation-fa530b5c-419f-4c03-a85f-d7f96cb9de95?ui=en-US&rs=en-US&ad=US
this book is helpful
https://books.google.com.eg/books?id=zWYLIp3zfvAC&pg=PA417&lpg=PA417&dq=infopath+form+handling+how+error+appears&source=bl&ots=CT6Um0LiZS&sig=O6Ckoh8MUwvAOa9NtlwarEBfG2k&hl=en&sa=X&ei=dYHcVLSfPITeatr0gqgM&redir_esc=y#v=onepage&q=infopath%20form%20handling%20how%20error%20appears&f=false
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you -
Having a problem with Person Group Picker. I add a PGP control to the form and then drag it’s DisplayName and AccountID there also to view/reference.
If I manually enter a name, say John Doe, into the control and check it, the DisplayName shows “John Doe” and the AccountID shows “i:0#.f|membership|[email protected]” like I’d expect.
However what I really want to do is default the control to the current users name. I’ve found posts that explain to set the default value for both DisplayName and AccountID to UserName(). That works,
except that the DisplayName remains set to “i:0#.f|membership|[email protected]”. Does not seem to update it even when form is submitted or saved.
I tried leaving the DisplayName default unset. But then DisplayName just remains blank.
Is there a way to trigger and update of this field?
Background: I’m using InfoPath 2013 published to a SharePoint/Office 365 site.
Jim BrownHi Jim,
I understand that the error occured when you opened the form in browser.
Error 5566 with InfoPath can be a result of different cases, you can take a look at the thread below for troubleshooting:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/244f67f1-bf52-412b-b9a2-c2357a645bb9/issue-with-infopath-error-5566?forum=sharepointcustomizationprevious
Did the web application use claim based authentication?
If yes, please follow the steps in the links below to auto populate User Information in InfoPath with Claims Based Authentication in SharePoint:
http://spvee.wordpress.com/2013/04/10/auto-populate-user-information-in-infopath-with-claims-based-authentication-part-1-of-3/
http://spvee.wordpress.com/2013/04/10/auto-populate-user-information-in-infopath-with-claims-based-authentication-part-2-of-3/
http://spvee.wordpress.com/2013/04/10/auto-populate-user-information-in-infopath-with-claims-based-authentication-part-3-of-3/
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/74a23382-3e47-470d-ba6d-f848aaf78220/infopath-browser-form-fails-and-gives-5566-error?forum=sharepointgeneral
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
InfoPath 2010 form parsing error with 3600 execution timeout value in SharePoint 2010
Hi,
I have a list in SharePoint 2010 with 100 columns where 25 of them are calculated columns. This list is designed by InfoPath 2010 with two secondary data connections to pull a few data from another two lists. There are 25 set value rules with the submit
button in InfoPath from. At present, the list is containing around 1000 items.
The problem is, when I published the InfoPath form it throws an error:
The SOAP message cannot be parsed.
In fact, the execution timeout is set to 3600 in config file. When I delete items from the list and keep it around 700 the InfoPath form publish then.
Could somebody tell me why this problem and what is the possible solution.
Thanks in advance.Hi pointtoshare,
According to your description, my understanding is that you got an error when you published InfoPath form.
Please modify the web.config file like :
<location path="_layouts/UploadEx.aspx">
<system.web>
<httpRuntime maxRequestLength="51200" executionTimeout="300" />
</system.web>
</location>
And modify the <securityPolicy> section like :
The web.config file is in C:\inetpub\wwwroot\wss\VirtualDirectories\spwebappname.
There is another reason for this issue, please take a look at :
http://www.heyweb.net/2011/07/infopath-the-soap-message-cannot-be-parsed/
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/ea8da113-fe9a-4878-9994-c1f24cc85c37/soap-error-when-publishing-infopath-form-to-sharepoint?forum=sharepointcustomizationprevious
http://sharepointshah.blogspot.in/2012/11/soap-message-cannot-be-parsed-error.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS) -
Hi,
We have SP 2013 online and infopath designer 2013. When trying to open any info path form using info path designer it is giving 2 error messages.
1st message is http://xyz.com/TestList/Item/template.xsn could
not be opened." After clicking "ok" to it, giving the 2nd message.
2nd message is " infopath cannot generate a form template for the sharepoint list.
InfoPath can not open the form.
For this command is not enough memory available"
Though I have sufficient memory left.
Please assist.Any suggestion would be appreciated.
-
Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file
Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
Save and Close goes to error page after modifying List in Infopath
Hi,
I have a list in Sharepoint 2013 which I have modified using Infopath 2013. After modification, If i open the list in Sharepoint site, i am not able to Save or Close the list. It gives "The webpage cannot be found" error.
Regards, Shreyas R SHi,
The new feature Minimal Download Strategy is activated on your site. Can you please deactivate
this feature and see?
It
is available under Site Actions -> Manager Site Features
15/start.aspx# -
This is due to MDS feature enabled on lyour iste.
Please remember to click 'Mark as Answer' on the answer if it helps you -
Cross Domain Trust Error, while opening the infopath in sharepoint list.
Dear All,
Facing some issue in
Environement:
Windows = Windows Server 2008
Shareppoint = Sharepoint Server 2013.
Project Server = Project Server 2013
Info Path = Info Path Designer 2013
Detailed:
I have sharepoint environment with Project Server,I which have created task list in my project site and then i customize that form using info path their is one column named: "Product Name" in my task list which is drop down menu in that menu
i want to show all the project name which are created in PWA Site. For that i made the External data connection to my sql server and select my desired table from that and also configured the my column data "i:e; Product Name. And published it to the my
site. Now when i opened that form it prompts the error
"The form cannot be submitted because this action would violate cross-domain restrictions.
If this form template is published to a SharePoint document library, cross-domain access for user form templates must be enabled
under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection
settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint Central Administration ."
Oopsss !!
Now start googling it found couple of solution shared listed below:
1. Enable the cross domain authenticated in Central Admin –> General Application Settings –> Configure InfoPath Form Services (Done)
2. Now Created the data connection library in my site collection which is PWA Site after that i went to the infopath and creating the data connection and
Convert to Connection File and enter the URL of the data connection library
and its prompt the error " the specified url is not a data connection library and enter the correct filename" didnt remember the exact error description at the moment.
So, that was all stuff, Kindly suggest me any step which i missed that or ay solution that resolve my this issue.
Thanks
REGARDS DANISH DANIEit seems the data-seed failed in your dehydration store.
so i would check if user orabple exsits in your db (pw is orabpel) .. and recreate the schema by executing the following script (based on your db)
orabpel\system\database\scripts\domain_oracle.ddl
hth clemens -
Hi,
I have an infopath web brower enabled form. In the form i have a date field.
I am passing the data from the database to that field using the C# code.
But, as the field from database is coming as string, i am getting an error, and i am not able to assign the value.
I get the date value from database as "3/25/2011 12:00:00 AM"
I used the below code:
[CODE]
if (objInfopathFormcData.myRecievedDate != null)
myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager).SetValue(objInfopathFormcData.myRecievedDate);
[/CODE]
I am getting the error as "Schema validation found non-data type errors".
How to set the value for a date field in Infopath.
Thank youHI,
I fixed it:
Below code is used to fix:
[CODE]
XPathNavigator xfield = null;
DateTime dtmyRecievedDate;
dtmyRecievedDate = Convert.ToDateTime(objInfopathFormcData.myRecievedDate);
if (objFormcData.FcCompletionDate != null)
xfield = myRoot.SelectSingleNode("/my:myFields/my:field97", NamespaceManager);
DeleteNil(xfield);
xfield.SetValue(dtmyRecievedDate.GetDateTimeFormats().GetValue(5).ToString());
// method to delete xsi:nil
private void DeleteNil(XPathNavigator nav1)
if (nav1.MoveToAttribute("nil", "http://www.w3.org/2001/XMLSchema-instance"))
nav1.DeleteSelf();
[/CODE]
Thank you -
Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support
Maybe you are looking for
-
Error when running extract paramfile on windows
can somone please tell me what uncognized parameter is? E:\GGS>extract.exe PARAMFILE dirprm\inext.prm REPORTFILE dirrpt\inext.rpt Oracle GoldenGate Capture for SQL Server Version 11.2.1.0.1 OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230 Windows x64 (optimi
-
If I disinstall iTune and reinstall it will I loose all my music?
If I disinstall iTune and reinstall it will I loose all my music? I am constantly alerted that I must install an updated version but each time I try to do it it does not work. What should I do?
-
Hey guys, if you can help me with this I will really appreciate it.
-
Help please with iTunes downloads?!
I cannot update iTunes (windows 7). Says it is an invalid program.
-
Invoke BPEL process on same domain - Binding (SOAP or java)
When BPEL processes are deployed on the same oc4j instances, do we need to do anything special to ensure that they invoke each other using java binding instead of SOAP? For e.g. consider BPEL process p1 and p2 where p1 invokes p2 deployed on the same