Infopath fields binding not visible in datasheet view Sharepoint 2010
Hello Everyone!!!
I have created a custom list in sharepoint then customized the infopath form in infopath form designer. I have created a drop down and bind the dropdown form the soap web service method. It is working fine when I open the form.
But when i open the DataSheet View of custom list, field is displaying but the drop down list is not getting bind with data. what is issue. Infopath binding and rule don't work with datasheet view?
Please reply
Hi,
As you mentioned dd data is appearing in form but not in datasheet view...
maybe there are compatibility issues
with 32 bit and 64 bit component of office and IE.
Try reinstalling "2007 Office System Driver: Data Connectivity Components" (link below)it installs a 32-bit version
of the Datasheet component that will work with the 64-bit version of Office 2010 as long as you are using a 32-bit version of an Internet browser.
MS Support Article https://support.microsoft.com/kb/2266203/en-us
Re-install https://www.microsoft.com/en-us/download/details.aspx?id=23734
Similar Messages
-
SharePoint 2013 - Choice Column with Fill-In enabled Not Editable in Datasheet View
I have a custom list with a choice column (check boxes) set to allow for fill-ins. Before it was migrated to 2013, I had a datasheet view and was able to edit the choice field by selecting one of the choices and/or add my own fill-in.
Now in 2013 that field is greyed out in datasheet view. However, all the other choice columns which are NOT set to allow for fill-ins are editable. I get all the choices with no problems. The problem seems to be with the choice
fields that is allowing for fill-ins. Why won't this work in datasheet view?Hi Jenkins,
It is a by design behavior that the filled-in value doesn’t show up in the list view filter options.
As a workaround, you can create an extra Single Line of Text column which saves the duplicated value of that Choice column, then filter the text column instead.
About how to copy value of a Choice column to a text column, you can set up a SharePoint Designer workflow to do the copy job and update the item.
A demo about how to update list item in SharePoint Designer workflow:
http://www.documentmanagementworkflowinfo.com/workflow/use-update-list-item-action-sharepoint-designer-workflow.htm
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I just started using a new version of Illustrator and the text I am creating has a pink box behind, looks to be about the depth of the normal linespace, it is not visible in outline view, only in preview. What is it and how do I get rid of it?
Hi Larry. I see. It is a file I have worked on previously, and the font is Myriad which I though came with the system. I just changed to Myriad Pro and the pink box disappeared. Thanks for the assistance, I know a new thing!
-
DW8 text not visible in design view
I have imported a site from DWMX(6?) to DW8.
In DWMX everything is visible in design view.
In DW8 the text is NOT visible in design view unless I switch off rendering using CSS (Display Styles Off), but displays fine in a browser.
If I switch off rendering using CSS I can see and edit the text but it is not remotely WYSIWYG
The pages are created from templates and were originally created using DW4 or DW3.
The site URL is http://www.decisionmodels.com/
There has to be a simple solution to this but I just cant find it.
Charlesfont verdana { font-family: Verdana, Geneva, sans-serif; }
I changed the font from default because one of the old fixes I found for Dreamweaver suggested that... I could change it back.
You are aware that this is not a legitimate CSS selector, right?
Forgive my ignorance, but what does this mean? Does it refer to my font selection? Or something else?
It means that your selector "font verdana" is not a legal selector. It says to find all "verdana" tags that are descendents of a font tag. Clearly there is no valid HTML tag called "verdana". If it was your intention to create a rule that would allow you to format text as verdana, or geneva or sans-serif, then that would have to be done with a CLASS selector, e.g.,
.font_verdana { font-family: verdana, geneva, sans-serif; }
Note the leading 'dot' and the underscore - spaces are not allowed in selector names. -
PDF File not opening in browser for sharepoint 2010
Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two daysIt would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Date picker is not working in IE9 for sharepoint 2010 appliation pages
Hi,
Date picker not working in IE9 for sharepoint 2010 appliation pages. We have enabled custom master page.
Thanks in advance.
ShameejHi,
For this issue, you can add the following line of code into the pickerdialog.master which lays in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS
<meta http-equiv=”x-ua-compatible” content=”IE=8”>
Or we can use the JavaScript code provided in this blog which would also do the trick:
http://williamwmy.wordpress.com/2013/06/03/problem-with-sharepoint-peoplepicker/
A thread with the same issue for your reference:
http://sharepoint.stackexchange.com/questions/27251/hotfix-for-problem-with-sharepoint-peopleeditor-in-ie-9
Best regards
Patrick Liang
TechNet Community Support -
Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command
Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
ScriptLink tag not working for application page sharepoint 2010
<ScriptLink> tag not working for application page sharepoint 2010 for including javascript in application page, it appends either 1033 or _layout to path specified for javascript.But javascripts are located in custom document library on site and not
in _layouts folder.
Please help and explain in details as I tried lot on this.Hi,
Use the following line of code
<SharePoint:Scriptlink runat="server" Name="~sitecollection/Style Library/[YOUR SITE]/js/functions.js" Language="javascript" />
Thanks,
Vivek
Please vote or mark your question answered, if my reply helps you -
Items visible in PDF Preview not visible in Design View
Hello-
I used the auto create function to turn an existing PDF info a fill-in able PDF. Auto create "auto detects" form fields, including in some areas of the form that are not fields at all (blank areas, etc.). I go into Design View and remove any extra fields. However, I've discovered there are some fill-inable fields visible in PDF Preview and in the actual PDF itself (once saved) that are not visible at all in Design View- thus I can't click on them and delete them- they just aren't visible in that view. I've read the forums and it seems the opposite problem is more common, in which something shows in Design View but does not show in PDF Preview or in the final PDF.
Any guidance on what's going on? Next steps? I'm not a coder, so the simpler the better. Thanks to anyone with suggestions.All the fields on your form are listed in the Hierarchy which is generally on the left-hand side of your screen. In there you should be able to go through each field and delete the ones you don't need.
-
The stock in transit field is not visible in MD04
Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran UndeHello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
transport orders with order confirmation (notified orders)?
Answer:
Purchase order confirmations do not have to match the original
purchase order delivery schedule lines. Moreover, the purchase order
confirmation (view MDLA in materials planning) does not contain the
same information as the purchase order to determine the stock in
transit. The display of the stock in transit is therefore not
implemented for the purchase order confirmation in the materials
planning evaluation transactions.
BR
Caetano -
InfoPath Form Library cannot edit in Datasheet view, cells delete themself
Hello,
I wanted to be able to edit a cell in datashee view for my form library. I have made sure within the publishing wizard that the cells can be edited in datasheet view. This seemed to work fine last week, but now when I input text into the cells, pause for
3 seconds, the cells then delete themselves???
I have no idea why, the cells are not read only and I have triple checked they can be edited in datasheet view. they are simple text fields!!
Has anyone ever seen this behavior before??Hi Palumbob,
I tested the same scenario per your post in my environment, however the datasheet view worked fine when I edited the cells.
For troubleshooting this issue, I recommend to test the things below:
Check if there are any workflows or event receivers to set the column value to be null in the library.
Type value in the simple text field and then click other cells to see how the value works.
Create a new datasheet for the library to see if the issue still occurs.
Create a new column in the library and test.
Create a new library and test.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Field data not visible in Association Applet
Hi all,
There is a vanilla applet "Organization Assoc Applet" of type association list based on business component "Assignment Group Organization"which has two list columns namely Division and Organization.To this applet I added one more list column based on a vanilla field Main Phone Number,but after compiling when I checked data for field Main Phone Number is not visible but as usual data for other two fields(Div and Org) were visible.
Could someone help me in this?
Thanks,
SambitHi,
Where you've added the column? to the Base or Query applet template?
May help you:
==========
Open the Applet in web layout and check the selected Application, it should match your application.
If you don't see the Application follow thiw:
in tools --> View --> Toolbars --> Configuration Context
if the selected Application is the correct one then go to "Applet web template" --> select the wanted template --> goto the web template items --> make sure that no duplicate "item identifire" exist!
Good luck -
SQL Expression Fields button not visible in Field Explorer
Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay AudichCommands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason -
Inspect with Task list not visible in QM view
In Material master QM view, for 01 inspection type, inspect with tast list is not visible.
Please advice how to make visible.Hi
SPRO-->Quality Management->Quality planning->Inspection planning----> Assign task list type to Material type
Definitely u get th lot.
Regards -
Enhanced field was not visible in DataSource
Hi ,
I Enhanced one field to DataSource, But it is not visible in that datasource.
T
he procedure which i followed is:
RSA6 -> Select DataSource -> Click on "Enhance Exctract Structure" -> It will show Append Structure -> Continue -> Add filed -> Activate + Back
When i checked again the same datasource it is not showing the appended field.
Can any one suggest me, wht can i do now to see that Added filed to DataSource.
Thanks and Regards
RajeshHi Rajesh,
go to LBWE Lo cockpit there u find the Datasource click on the link there u find the appended field is marked as Hide and Field only Check boxes u can un mark the Hide check box and activate the data source u find the appended field.
i hope this will help u
Thanks & Regards,
Ramesh
Maybe you are looking for
-
How to temporally link layers in prem cs5?
Hi I have a complicated project and for various reasons the producer has asked me to drop in a extra gfx making my framing all off.. so I need to simple move a section of the project to the left, but I need to move near 20 layers and have them all mo
-
FAL_Server vs. FAL_CLIENT
hey, I presume an error in my configuration. Primary DB=test_a Standby DB= test_b I´ve setup up my standby database with parameters fal_client='TEST_A' & fal_server='TEST_B' Startup mount --> fal_client parameter is mapped to a service fal_server kee
-
when I backed up my phone I lost the ringtones that I purchased how do I retrieve them?
-
Safe to leave USB plugged in but unconnected to iPod?
Is it safe to leave the USB cord plugged in to a computer or other USB receptacle when the iPod is not attached to the connector end of the cord? Will the plastic cap for the connector end protect it. Specifically, I have a new car that has a USB por
-
Compressor losing services in mid-transcode - will it recover automatically?
I'm testing distributed processing for my company using Compressor with two quad-core iMacs. Everything seemed to be going fine, and the transcode was going to take about 4 hours compared to the 19 hours it would have taken on a single machine, but w