Infopath form people picker not working in outlook 2010

Hi,
I have created custom task form which has reassign feature. If the form is opened in IE, people editor control is working but in outlook account names are not resolved and dictionary also not working. There should be some work around as OOTB approval
task form could able to do it.
So, Question is, why people picker is not working in Outlook? and how to make it work? If I store user profile in InfoPath form, people editor in outlook is working. but how to make a dynamic soap connection ?
Thanks.

Don't mark your own post as an answer when you obviously didn't understand the question...
Dharnima mentioned it is working in IE but not working in Outlook, so it's obviously not because the
"Requested By" field is in read only otherwise it wouldn't work in IE either.
Like Navid.R mentionned, the problem is indeed when going through the "Reassign Task" button, but coming from Outlook.
I have the same problem where the people picker validator and the people directory button doesn't work, only when coming from Outlook. I do click on Reassign Task, but I am unable to valide or open the people directory with both people picker buttons, simply
nothing happens.
I tried adding a native SharePoint Approval workflow to my list, and this one works fine. I can click the "Open Task" button in Outlook, click "Reassign Task" and then the people picker works perfectly fine.
However my custom workflow (that has default forms) does not work when prompted from Outlook.
I even tried to delete both forms and republish my workflow, so SharePoint can regenerate the forms by itself, it did generate new forms, but no luck either.

Similar Messages

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
<contextMenu idMso="ContextMenuFlaggedContactItem">
<splitButton idMso="DialMenu">
<menu>
<dynamicMenu id="CallContactwithFreedomvoice
" label="CallContactwithFreedomvoice"
getContent="OnGetContenttest" insertAfterMso="Call"/>
</menu> </splitButton> </contextMenu>

Hi Narasimha prasad2,
Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

In migrated IP form People picker not showing value

i have a MOSS 2007 IP form migrated to SP 2013. I need to add a people picker control instead of dropdown. The newly added picker picker is showing up on the form but its value is not showing.
It shows up when i change the value in existing people picker control(since IP form submits to locate the new user). so basically people picker is not able to resolve the person entry in first go.
What can be done to show the value without change in the infopath xml structure( cant even migrate it to 2013 IP)

Hi,
For your issue, you can migrate InfoPath 2007 form to InfoPath 2013 form as the steps of following blog and then you can add new people picker control.
http://www.dotnetfunda.com/articles/show/2829/migrating-infopath-2007-form-to-2013-forms
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

TAPIOVERRIDE not working w/Outlook 2010 64-bit & Lync 2013 64-bit

Hi all,
I have a Win7 64-bit machine with Office 2010 Standard 64-bit and Lync 2013 64-bit. The user would like to use the Windows Dialer instead of Lync to call from his Outlook contacts. Prior to my installing Lync for him, this worked very well. However, thereafter
Lync attempts to do the calling.
There are dozens of threads out there for using the TAPIOVERRIDE registry fix (http://support.microsoft.com/kb/959625/en-us) to correct this issue, but it is not working for me and I assume it's due to my combination of application versions. I've confirmed
both approaches (HKLM\Software\Microsoft\... -vs- HKLM\Software\Wow6432Node\Microsoft\...) fail to work even after rebooting entirely - for the record, I would assume the "32-bit approach" is what I need.
Has anyone gotten the TAPIOVERRIDE fix to work with the aforementioned software versions? Can anyone else make a recommendation on a TAPI add-in for Outlook which would inherently override Lync's calling functionality?
Thanks!

Aaron0001,
Good news. As an Office365 subscriber, I was able to open a service ticket on this issue, and I believe we've got a solution. As it turns out, these Call Integration/TAPIOVERRIDE keys do work (as a precaution, I created both); however, it appears
they have to be in-place when you install Lync to have any effect. I'm guessing that these keys may impact how Lync installs, but have no effect if Lync is already installed.
I had uninstalled Lync so that I could use Outlook with Windows dialer ... dialing functionality was restored as soon as I uninstalled Lync. However, when I got online with the Microsoft technician he had me reinstall Lync 64bit (after the keys had
already been created) and, presto, Outlook is still using Windows dialer rather than contacting Lync to try to place the call.
I hope this is helpful to you, or to anyone else who happens upon this page with the same problem.
All the best,
Kevin

PDF Preview Handler Not Working in Outlook 2010

I have Win 7 Home Premium 64-bit and Outlook 2010.
Everything was working fine, until a few months ago when the PDF Preview Handler stopped working. I got the typical message that others were having with the issue with Adobe Reader 9. I have Adobe Acrobat X Pro and have also used Adobe Reader X. I have tried the little registry fix app that is supposed to fix this issue, but it states that my registry is already correct. Has anyone found a resolution for this issue with Acrobat X and Outlook 2010? As a workaround I am using the Foxit PDF Preview Handler, but I have to reinstall it everytime Adobe Reader or Acrobat is udpated as for some reason Outlook then reverts back to the PDF Preview Handler, which is not working.
Thanks,
Merg

Nope, using 32-bit. And I recently uninstalled Acrobat Pro completely and reinstalled it due to an issue with it not updating due to having the "Error Applying Transforms" issue. After I reinstalled, I updated it completely. I suppose I can try uninstalling and reinstalling again, but that seems like overkill.
- Merg

Outlook Delay Delivery not work in Outlook 2010

Outlook Delay delivery is not working even after installing SP1
Please update me
10

Hi King,
Please make sure you have sat right for the Delay Delivery time.
After you send the delay deliver email, please don’t open it in your Outbox.
If you have open the email in your outbox, it will not deliver at the time you have sat.
Delay or schedule sending email messages
http://office.microsoft.com/en-us/outlook-help/delay-or-schedule-sending-email-messages-HP010355051.aspx
Thanks,
Evan

Crystal 2008 not working with outlook 2010 mapi when exporting

I recently had service pack 3 and fix pack 3.3 updated to my system ( crystal 2008) to help correct a issue with mapi not populating addresses from outlook when trying to export a report. I have a new issue. - sort of???
Now when I try to export multiple reports in a row I still have the same issue. I can send 1 report out. But if i try to send another report out i have the same issue that I had with mapi not populating the addresses field from outlook.
To get past this I shut down crystal and then bring it back up and I can send (ONE) report again before the same thing happens. Does anyone know if there is fix for this issue?
Fyi - this has nothing to do with the design of my report. The problem lies with how Crystal is communicating with mapi when trying to allowi a 2nd report to be exported. I am not using any outside programs, only crystal 2008 version and trying to export my report through mapi (outlook 2010 (in PDF format). As stated above with the above fixpack - I was able to restore exporting but now I can only export 1 report at a time.
When I select a 2nd report to export (after just sending out my 1st) the mapi function will not allow me to select addresses. So while the fix pack (from the website) restored some functionality it only allows 1 report at a time.

Hi Max,
It works for me. I get the Allow for 1 minute box and then I export again and same thing.... works...
I'm using Windows 7 64 bit at home. It just installed SP 1 so that may be the difference also but I don't recall this being a problem before.
I also don't see this being a CR problem, if it works once then something else is blocking the MAPI permission box. Check your anti-virus logs, could be it things a trojan is taking over your address book and blocking the second attempt. The AV logs should show you if something was blocked. Or disconnect from your network/disable network cards and disable your AV and test again.
Do you have any other tool that allows you to export? If you install Winzip or WinRAR it adds a feature that allows you to right click on any file, save the PDF to disk and then test using the zip tool to see if that works for you. If not it's definitely your AV or possibly Firewall software blocking the pop up.
Thanks again
Don

Rules not working in Outlook 2010 Sent Items folder (Personal Folder)

I've been trying to automatically categorize and send emails I've written and sent to the archive's Sent Items folder. However, everytime I create a rule for a particular type of email it doesn't carry it out. The rule will only work when I manually
click 'Run this rule now...'.
Here is what my rule looks like:
Apply this rule after the message arrives
from Byron33
and sent to 'XXX'
and with 'YYY' in the subject'
assign it to the 'ZZZ' category
and move it to the Sent Items folder (here, 'Sent Items' is in the Archive section)
But it doesn't work. All my other rules work (for the inbox folder). Any way in which I can get this rule to function automatically?

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, I understand that the rule will only work when you manually click 'Run this rule now...'. If there is any misunderstanding,
please feel free to let me know.
Turn off Cached Exchange Mode to test this issue:
http://office.microsoft.com/en-us/outlook-help/turn-on-or-off-cached-exchange-mode-HP010355560.aspx?CTT=1
Click the File tab.
Click Account Settings, and then click Account Settings.
On the E-mail tab, click the Exchange account, and then click
Change.
Under Microsoft Exchange server, clear the Use Cached Exchange Mode check box.
Exit and then restart Microsoft Outlook 2010.
If it work fine after turn off cached exchange mode ,please repair your .OST file follow this article steps:
http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA010354964.aspx?CTT=1
More additional information
Troubleshoot rules you can refer to this link:
http://office.microsoft.com/en-us/outlook-help/troubleshoot-rules-HP005242904.aspx?CTT=1
Similar thread you can refer this link:
http://www.msoutlook.info/question/133
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
information.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Bug: Auto-archive does not work in Outlook 2010

The Auto-Archive feature does not seem to work. In my case, I'm creating a mail folder in my inbox and setting the auto archival to "2 weeks, then delete". I run Auto Archival manually. It seems to progress without any error, but I know better.
It should take the process more than a few minutes to process the mail I have stored up for almost a year. No error and my mail has been untouched.
I noticed this thread in the Outlook 2010 beta forums
I'm having the same issue. I'd like this bug fixed if possible? I keep archival folders to manage my mail.

Hi Canovac,
Auto Archive works as expected in my environment. I noticed you said that you created a new mail folder in your inbox. Did you just create the folder and move the mail to that folder? Auto archive looks at modified date and if you
move the mail to that folder that changed the modified date so the mail will not archive.
To determine the modified date, do the following:
While on the folder in question:
Click View > View Settings > Columns
In the Select available columns from dropdown choose
All Mail Fields locate Modifed in the Available colums: and click
Add
If the mail has not been modified within the last two week span, please test the following for me.
Start Outlook with the /safe switch and then run Auto-Archive.
Does auto-archive work when starting with the /safe switch?
Regards, Teresa Microsoft Online Community Support Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community
members reading the thread.

ICloud email account not working with outlook 2010

How to I make iCloud and outlook 2010 work?

See the section on setting up your iCloud account in Outlook 2010 in this Apple support document.
iCloud: Set up iCloud Mail on your devices and computers
By the way, you posted this in the Apple Developer forums, when it probably should have gone in the iCloud forum.
B-rock

Read receipt not working in Outlook 2010

Hi. I am having some problems with read receipt. It does not work on my computer, it works fine on my co-workers computers. It worked fine for a couple of weeks but no I neither receive read receives from others to confirm nor do mine get sent
with my mails.
I have looked at rules and I have no rules. I really need this to work because of my work.
can someone please help me ?
Thanks
Baldvin

Hi Baldvin,
Did you tick the 'Request a Read Receipt' option when composing a new message? Or did you select the option "Read receipt confirming the recipient viewd the message" under
File tab > Options > Mail >
Tracking section?
Can you confirm if the recipient clicked Yes button and agreed to send the receipt?
You can send test emails with a request for read receipt to yourself to check the result.
Regards,
Steve Fan
TechNet Community Support

Viewmail 8.6.5 not working with outlook 2010

Hello,
I try to configure viewmail 8.6.5 with outlook 2010 on a windows 7 computer. We have unity 7 and exchange 2007. I enter all the information in the viewmail setup but when I click test settings it says unable to find the voice mail server. The unity server name I entered is correct I can also ping it from my computer. Any suggestions.
Thanks.

Hello Horacio,
At this point we are missing what outlook version you have and what exact version of Unity or UConnection.
1-Check Compatibility Matrix: Cisco Unity and the Software on Subscriber Workstations
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cuclientmtx.html#wp364674
and see if everything matches accordingly to the supported versions, this is a well known issue. If everything does continue with option below.
2-Beside the server name try with the IP instead.
3-Check if you have turned on the SSl, if you do turn it off and try again
Best Regards,
David Peck

External CSS for infopath forms in browser not working

Hi everyone,
I'm going to develop many forms using Infopath 2013 and then deploy to Sharepoint Server 2013. Because of UI requements, I need use css to accomplish this. I create external css files so I can reuse them easily. I followed this steps:
Add css as resource file.
In .xsl file, add <link> which references to css file
Save manifest.xsf file and deploy.
In Infopath designer, it works well. But when I deploy to Sharepoint Form Library, these css is not applied anymore.
Could you please help me.
Thanks for your time and considerations.
Dang Huynh

You are previewing the *.dwt file? Make sure you have Preview
with temp
files enabled in your preferences.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Sean022" <[email protected]> wrote in
message
news:g7mhro$64a$[email protected]..
> Hi,
>
> I have built a website page which was all fine until I
added editable
> regions
> and turned it into a template. Now when I try previewing
in Internet
> Explorer
> it comes up with a File download window asking 'Do you
want to download or
> save
> this file?'. Anyone know what is going on?
>
> Many thanks,
> Sean
>

Previewer not working in Outlook 2010

I have a windows xp machine that is unable to preview pdf files in outlook. I get the error adobe pdf previewer failed to start. I can prefiew other files like excel and word documents. and when other users log onto the machine they have the same problem. The computer used to run Office 2007 but I upgraded to Office 2010 and it still has the same issue. I have uninstalled adobe and reinstalled from the web site and still the same problem.

Have you opened Reader by itself and accepted the End User License Agreement?

Infopath form people picker not working in outlook 2010

Similar Messages

Maybe you are looking for