Infopath forms are not displaying in the list

Hi,
   I have created an info path form template after customizing a list form using infopath designer. But it is behaving weird. After submitting the form it is not displaying in the lists allitems view rather it is displaying from designer but directly
under the list not in the items folder.
1) Any idea why this is happening?
2) What is the use of NaN.xml? why it gets created in the list?

Yes, it sounds very simply, but there is a very tiny little broken piece causing lots troubles.
 It’s tiny piece, so the solution is going to be very simple. On the other hand, it’s hard to find out because it is very tiny broken piece.
I have feeling that you made a mistake while saving/publishing or filename in submit option (I don’t think List InfoPath form let you set up different submit option).
Sometimes, it is much faster and easier to re-do it again. I recommend you to following the article below. You can skip most but please pay attention on the start (beginning of Part 2 – Customizing)) and on the end (Part 4 - Publishing)
http://msdn.microsoft.com/en-us/library/office/gg180738(v=office.14).aspx
Once you follow the best practice written in the article and make it work, then you may realize the difference and mistake.
백상하 - Stop hacking my blog http://blog.naver.com/agilepoint
쉐어포인트 배움터 http://sharepointkorea.com

Similar Messages

  • Portal Forms are not displayed in the new migrated environment.

    Hi All,
    We have a distributed Portal environment. Application server and Portal Repository running on one system(System1) and one more portal repository and portal components existing in anothor system(System2). Through DAD we connect to System2 and access the componets. Recently we have done a migration.The Database along the Portal Repository in system2 was migrated to a new server. For this we have edited the DAD and made the necessary changes. But after the migration, the Forms residing in migrated portal repository(System2) are not getting dispayed.The rest of the things(Reports, Pages, Links,LOVs etc..) are working fine. The forms are not getting displayed in the pages where it's added. When forms are run from RUN link in Develop Tab it's showing ERROR but not the cause of the error. Will anyone tell what changes I have to do to make the Forms work?
    Thanks in Advance,
    Tom

    Hi DIAdemUser1,
    This feature was indeed removed.  R&D felt like it caused more confusion than benefit, and I agree.  I do apologize to you and others who liked the feature that has now disappeared.  When DIAdem 9.0 released the custom properties in the Data Portal showed their data types, but that feature was also removed in favor of simplicity.  I often miss that feature, but it's for the greater good.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Form develper 9i. (form are not displaying on the browser after compiling)

    I run oracle 9i version 2, and internet developer suit on my system. Idesigning my forms and the codes to run behind them with the form developer. If I click the
    "run form" button during testing, the form will compile successfully, but will never display. The system will only display "Website found, waiting for reply". I believe nothing is wrong with my installation since i was able to make connection to the database through the form developer. What do you think is the problem and how can I solve it.
    Frankfurt Moses Ogunfunminiyi
    Osun-State
    Nigeria

    Hello,
    Use Condence symbol 'C' in the respective fields.
    &REGUH-STRAS(C)& / &REGUH-ORT01& / &REGUH-PSTLZ& / &LV_REGIO(C)&
    Regards,

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Chinese characters are not displayed in the Firefox bookmarks

    Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
    Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
    I googled and got some tips:
    1) Set your browser to recognise Chinese language internet sites.
    Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
    - I did this.
    2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
    Encoding settings can be changed under the "View" option in your browser's menu-bar.
    - It was already set to UTF-8.
    3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
    - This has been done when I installed Windows.
    I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

    No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
    Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
    Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • Analyzer - Bitmaps on forms are not displaying

    We are running Analyzer 5.02 (and 5.03) SQL Server enterprise repository. Web Java Client.Form view bitmaps are not displaying on the load of the form. The only way to view the bitmap is to either refresh the view or toggle the main menu button. This occurs using BMP, JPEG or JPG files. Only one bitmap is used per form, file size is around 1600 KB for BMP and 17 KB for JPG.Hyperion Support has no answer. Does anyone else?

    Check you clients using "jview" to see if it they are running at least JVM verion 5.00.3186 or later. The lastest is always better. We had the same problem before, but after making sure every clients run the latest jvm, the bitmaps display OK now. Also I suggest you should reduce the size of your bitmap. Sam Sukjirawat---Message Posted by jtocci   3/20/02 11:43---We are running Analyzer 5.02 (and 5.03) SQL Server enterprise repository. Web Java Client.Form view bitmaps are not displaying on the load of the form. The only way to view the bitmap is to either refresh the view or toggle the main menu button. This occurs using BMP, JPEG or JPG files. Only one bitmap is used per form, file size is around 1600 KB for BMP and 17 KB for JPG.Hyperion Support has no answer. Does anyone else?

  • AET Issue-Zfields are not available in the list of Reusable ZFields List

    Hi Experts
    I created and added Z fields using AET for Incident (SRQM_INCIDENT_H/IncidentHeaderEF VIEW).
    Same Z fields I want use in Incident_SLA (SRQM_SLAPRO\ SLASRVCTRVIEW), I make utilize of Add Reusable Field button to choose the existing Zfields. But Zfields are not available in the list of existing ZFields  for SRQM_SLAPRO\ SLASRVCTRVIEW.
    Please help me in this scenario.
    Thanks
    Chand

    This is almost same issue which makes me to reply here..
    In Extension Object MKTPL_MPL, MKTPL_MPT I could reuse the fields which were defined in MKTPL_CPT.
    And in Extension Object MKTPL_CPG, I could also reuse "some" fileds in MKTPL_CPT.
    But some of fileds of MKTPL_CPT which were already reused in MKTPL_MPL, MKTPL_MPT were not displayed in the reusable fields list for MKTPL_CPG.
    In AXTREG, The BOP and Extention location is same like below.
    Can you please explain to me why I cannot see the fields in the list? or, what should I check in the system?
    [in AXTREG]
    BO : MKTPL_CPT
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_CPG
    Reference BO : MKTPL_CP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    BO : MKTPL_MPL
    Reference BO : MKTPL_MP
    BOP : Header
    Extension Location : INCL_EEW_MKTPL_HEADER
    Many thanks and regards,
    Soyeon

  • Leading zeros are not displaying in the excel

    Hi Experts,
    Leading zeros are not displaying in the excel
    Here is the situation:
    I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
    Normally our material numbers will start with zeros.
    But when I check the email excel file , leading zeros are not displaying.
    Even I checked the application server (AL11) file, zeros are there.
    I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
    Could you please advise, how to display leading zeros to the material number in excel file.
    Thanks in advance
    Raghu

    Application server file showing  zeros infront of the material number.
    1200#  0012401387# XXXXXXXX
    Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
    when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
    I checked custom FUNCTION MODULE . No mistakes in that.
    ===
    Sudhir,
    As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
    Application server file showing like below
    1200#  '0012401387# XXXXXXXX
    ===
    Could you please advise anyone how can we acheive this.
    Thanks

  • Mail messages in my In Box are not appearing in the list of messages.

    Mail: SOME mail messages in my In Box are not appearing in the list of messages.  Instead, there's a blank line in its place if already read, or just the blue dot if unread.  But when I click on the line, the message's column/header detail appears (and I can open it).
    (Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash.  None of the emails I'm questioning have any reference to his email address in them.)

    Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message.  (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

  • Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

    Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

    What's more, they don't even show on the bluetooth devices list..

  • HT201401 My previously made calls are not displaying in the recent call section?  How can I restore  them+

    My previous calls are not displaying in the recent call section.  How can I fix this?

    There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here. 
    To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store. 
    Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
    Hope this helps. 

  • Synced bookmarks can be searched for and found but many are not displayed on the complete scrollable bookmarks list.

    How odd. I've a somewhat complex bookmarks menu hierarchy, perhaps two dozen folders each containing between five and fifty bookmarks as well as a sub-folder or two. All of this is synced and displayed correctly with the bookmarks tab in the app, except for some of the more recent bookmarks that not organized into folders, and are floating inside the bookmarks menu. Of thirty or so, only five appear. Yet, when I search for them within the app they are found, including several bookmarks made today. These are bookmarks contained in the bookmarks menu but not in any particular folders. Clearly they are synced, yet the entire contents of the bookmarks menu are not displayed correctly in the app. Syncing otherwise seems swift. I've less than 600 bookmarks in total. I seek not to search for specific bookmarks but to browse my entire collection, so you can sense my frustration. I'd call this a bug. Any thoughts? Thanks!

    No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
    Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
    Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

  • Groups are not displaying in the user's member of tab

    Hi ,
    We have a issue,
    After mapping any AD  group in CMC,the groups and users are displaying  in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
    After restarting the CMS every thing works fine.
    Every time after adding a new user we should restart the CMS, it is very difficult for  us as number of users are working on this .
    We are using number of AD groups.
    Is there any resolution for this with out restarting the  CMS.
    Thank you  in advance.
    Environment -
    BO XI3.1,
    LDAP authentication.
    Thanks & Regards,
    Collin.

    The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
    I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
    Regards,
    Tim

  • User Forms are not displaying in SAP B1 2005

    Hi,
    I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
    Can any body help me for the same?
    Thanks.
    Archana.

    Hi Archana,
    Are you using some special items in your form?
    You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
    In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
    Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
    Hope it helps
    Trinidad.

Maybe you are looking for