Infoprovider text in report

Hi Experts,
I have a query running against a Multiprovider. Our users want to see which source the key figures are picked from and to achieve this I have added the InfoProvider InfoObject from the Data Package Dimension in the BEX Query designer. When I run the report only the key of the InfoProvider InfoObject is displayed in the report not the InfoProvider name (text).
On the Display tab on the Infoprovider InfoObject properties in the Bex Query designer it is not possible to choose text (only "key" or "no display").
As our users have no relationship with the Infoprovider key we need to display the text instead. Is there an easy way to do this?
By the way: When I look at the Characteristic Values of the InfoProvider InfoObject it is able to display both the key and text, but I have not managed to get this text into the report.
Please help,

Hi Odd,
Though not really sure with this idea but I guess the text can be displayed by creating a Customer Exit variable on 0infoProv infoObject.
In the exit define the text for the infoCubes involved in your multiprovider.
Regards
Shalabh

Similar Messages

How to get a key text in report

HI
in my report i am unable to get a key text
the report is showing the vendor or material by number not by name
can anyone help...
thanx ,
UMAR NAYAB.

Hello,
when you mentioned:
when you run the universe query, on the left side, expand the L01 <Charateristic> and drag in the L01 <Characteristic> Key which is the green colored icon along the L01 <Char>. This will get you the key and the text in your webI
Are you doing this in the webi report after you refresh it?
Or are you doing this in BEX?
I am able to get EITHER the text or key to display.
I get the text when i have the properties set to Text & Key and Medium length for the Text View.
Any other selection for text View, like std or long, result in seeing the key instead of the text.
Thanks,
Bill

Texts in report painter

Hi All,
Do someone know if it's possible to call budget text with report painter ?
Many thanks for your answer

Quidacciolu,
This is a forum for discussing business process specific to domains..
I would recommend the ABAP forum for this question and you would get very relevant answers and quite likely that you would get your problem solved also.
ABAP Development
Arun

How to transport text in report programs

hi experts,
any one tell me how to transport "text" in report programs.
thanking u ,

Chk these threads:
Transporting Translations of Text Elements in SE38
How do I disable input for a table control?
Hope this helps.
Regards
Vinayak

Display issue with HTML formatted text in report builder

I am using the FCKeditor in my application to allow endusers
the ability to create formated text on reports. We curently are
experiencing 2 issues: 1. If you copy and paste from MS Word
2003/2007 it will not display the text correclty in the report; 2.
If you use the FCKeditor toolbar to insert bullets or a numeric
list it will not align the text correctly on the report. We are
using Coldfusion 8 with Hotfix 1 and Coldfusion Report Builder's
lastest build release.
Has one experiences this same issue with HTML fields not
printing correctly using the Report Builder? What other HTML
editors besides FCKeditor might we use?
Thanks,
Dan VanWieren

Can you tell me how to use </td> for each values
Give me your example report - using before or after report
Thanks
MT
<BLOCKQUOTE>quote:<HR>Originally posted by fdenis:
Hi Gavin,
If I understand well, your HTML tags are coded directly in your fields in the database, right? Because if it was not the case, you could have use a format trigger checking for which destination you're generating your report...
if UPPER(:DESFORMAT) = 'HTML' or
UPPER(:DESFORMAT) = 'HTMLCSS'
then
-- insert your HTML code in the value
-- of your field. something like...
newValue := '' | | :YOUR_FIELD | | '
srw.set_field_char( 0, newValue );
else
-- when generating to other format,
-- you'd have to add the formatting as
-- you want.
end if
return( true );
Of course, if it's not acceptable to remove the HTML tag from your database fields, you could develop a procedure that would translate your HTML tags to the good formatting (eurk... ;-)
Good luck... :-)
Frederic
<HR></BLOCKQUOTE>
null

Long text in report output

Hi all,
I want to display long text in report output how is it possible.
how can i get the long text for fb60 or fb70.
Edited by: D Tarun Kumar on Aug 23, 2008 11:26 AM

How can i get these
    ID                            =
    LANGUAGE                      =
    NAME                          =
    OBJECT                        =
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
TABLES
    LINES                         =
Thanks

SSRS Hide Description text in Report Manager

Hi
Does anyone know if you can hide the description text on report manager, this is populated in report properties > Description or can be updated direct in report manager.
I want to add a description but I do not want it displayed in report manager, is there a way of removing this?
Thanks

Hi Monkey14,
According to your description, you have a report with description. Now you just want to hide the description when accessing the report manager. Right?
In Reporting Services, we have a css file for Report Manager to set style. Now we just need to modify the style for description box. Please follow the steps below:
Go to Your Disk:\Program Files\Microsoft SQL Server[your MSRS instance]\Reporting Services\ReportManager\Styles\ReportingServices.css.
For your items, the style class name is "msrs-itemDescription":
p.msrs-itemDescription { white-space: nowrap; width: 250px; overflow: hidden; text-overflow: ellipsis; font-size:10pt; color:Gray; }
Add “display:none” in the style. It looks like below:
Save and preview.
Reference:
SSRS 2008r2 cutting off report descriptions in main display page in report manager
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Weird Usage in my Text message report

Hi, I found some weird usage in my text message report - records of heavy-data usage with unidentifed number and marked as International Mobile Data. I don't think I've ever used international texting. Please see the screeshot at this link: http://pan.baidu.com/s/1mgL50xy Could you please help me figure out what it is? Thank you! Helen

This is not an AT&T text message report. It is more like a Baidu usage report of your Baidu cloud storge account.

What is the difference between the green text bubble that reads "sent as text message" and the blue text bubble reporting "delivered?" Is the green text bubble not delivered?

what is the difference between the green text bubble that reads "sent as text message" and the blue text bubble reporting "delivered?" Is the green text bubble not delivered?

iMessages are sent using Apple servers, using either WiFi or Cellular data. They can only be sent to/from iDevices or Macs that have the Messages app. SMS messages use the cellular network. Both methods can deliver the message to the recipient.
http://www.apple.com/ca/ios/messages/

Text message report - unsuccessful

I sent a text message with a photo and noticed an envelope icon and a black circle with an i in it next to the the message. I did a long click and a list of message options was brought up. I checked view report and status was listed as unsuccessful. What does this mean? I have never received these icons before.
Does this mean my messages are being blocked. It was sent to an AT&T phone.

Good morning.
The message may have not been able to be delivered due to the message size, or depending on what type of phone it was being sent to. Some devices cannot use enhanced messaging. Additionally, it may have been the network or area you were in at the time, which may have caused a delay in the switch. Therefore, at the time you checked the message status, it was unsuccessful. Have you been able to since, send that message? Have you had this issue sending to any other phone at any other time, since this incident? If so, you may try power cycling your device and retry.
Thank you,

Call Standard Text by report replacing the variables with their values

Hi,
I have a requirement to call a standard text from a report.
Following is the text present in standard text.
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
I am doing it by using READ_TEXT. But READ_TEXT reads the entire text as it is.
Is there any way I could retrieve the standard texts with &PTXT1-ENAME& replaced by the value of PTXT1-ENAME in report. And similarly &MEMOACT-PLDAT& replcaed with its actual value.
Any pointers in this regard would be helpful.
Points will be awarded.
Regards,
Mayank Agarwal

Hi,
In the Text
&PTXT1-ENAME& will attend for interview
on &MEMOACT-PLDAT& at &MEMOACT-PLTIM&.
do not use the * as a paragrapgh , use /: as the paragraph
Regards
Sudheer

How to display Cell Text in Report?

Hello,
The users want to add cell text (comments) to their data for the controllers. The users are asked to enter their comments on a certain intersection of cells (e.ge. Total Year -> Plan -> Product unspecified). We want to display a report with the data and next to it the comments given.
One option is to print the webforms, but the result is terrible.
What options are there to accomplish this?
Thanks in advance,
Philip Hulsebosch

Hi,
Have you had a look at using BI Publisher Desktop to customise web forms as reports for printing.
For further information have a look the 9.3.1 planning admin documentation, page 213 "Customizing Reports", it is pretty easy to get a grip on and might just help formatting issues.
Otherwise Financial Reports may be another angle to start investigating.
Hope this helps
John

Apex 4.1 different font text in Reports Region and Interactive reporting

Hi everybody,
In my APEX 4.1 page, I have two regions using the same ''Reports region" Template but font text are different. Why The first region is an interactive reporting. The second it's a report. I know that each one has his own data for sure but the same region template .Spaces between colons are different. Is it normal ? I want to have the same font text for the two regions.
Thanks in advance. Bye.

Apex4.0+HTML_DB1.6 wrote:
Theme 13 is not an APEX 4.x theme ? How I can know that is one of this serie ?
Legacy themes are flagged with a "*" in the theme gallery. Standards mode themes are not. (I don't have access to APEX 4.1 at present to be able to identify specific themes.)
Properties of interactive report components, is it possible to take a look on this properties or it's a "black box" ?
You can either look in the global APEX style sheet, or (probably more usefully) use a browser web inspector to examine the CSS properties of the IR components in the page.

How to get Long text in report from FBL3N

Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?

Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Reward points for useful Answers
Regards
Anji

Text in Report Painter not displayed in the logon language.

Dear fiends,
I need change the language in the Report Painter, but i don't get translate the texts.
My logon logon language is Spanish but in the report painter the language is English.
In the transaccition GCRS the laguage is Spanish.
I copy these reports from client 000 and regenerate them but the lenguage remains the same.
I've also tried with GRRT transacction.
These are a standard report. My componet version is 4.6C
Can someone help me?
Thanks in Advance.
Carlos.

Is this problem solved Carllos?? If so, please lt me know. Even Im facing the same.

Infoprovider text in report

Similar Messages

Maybe you are looking for