Inforecord Efective price is not Updating

Dear All
I have seen that the Effective price is not updating in Inforecord.
Kindly can I know why it is not updating?
I am Maintaining gross price condition
eg:ZM00 8:00/-
Result: Condition
Net Price: 8.00/-
Effective Price: 0.00/-
Regards
Chaitanya

System can only update Net or Effective price in the info record based on the customizing setting made.
sproMMPIR---Define price history.
Reg,
Deepak.
Edited by: deepak k b on Oct 30, 2008 7:22 AM

Similar Messages

In material master standerd price field not updating in group currency

In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Thanks
Goutam

Last Purchase price is not updated

Hi
The last purchase price is not updated when posting a GRPO.
Any Ideas?
Its 2005 A SP01 PL48
Thanks
Franz

Check this WIKI
[Does a Goods Receipt PO update the Last Purchase Price List?|https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=36438427]

Unit selling price is not updating

Hi
I am updating unit selling price of an item using API.
code:
   v_line_tbl (1).request_date := SYSDATE;
   v_line_tbl (1).unit_selling_price := 299;
in the above code request_date is updating to sysdate but selling price is not updating.
how to do this?
Thanks

The CALCULATE_PRICE_FLAG is in the OE_ORDER_LINES_ALL table. This setting could override determines pricing engine calls which could be overriding your update.
Values -
Calculate Price (Y)
Partial Price (P)
Freeze Price (N)
Thank you,
Debbie

Po prices is not updateing from inforecord

Guru
In Po when enter the Material & QTy & Price for that material is appering from info earlear now the problem is that Price is not picking from the last Po or Inforecord what must be problem. can u help me
Thanks
Sudhir

Hi
Price from inforecord has following steps
1) System will search for inforecord with valid price if it finds then the price will be pulled to PO
2) If there is inforecord and no valid price then system will look for last PO to pull the price.
3) If there is no info record then we have to enter the price manually.
In your case check the above prerequisites additon to that
1) If it is refering the last PO no then check whether the item is deleted or not.
2) If it is refereing the valid price in info record then check the validity period of the PIR.
Hope it helps.
Thanks/Karthik

Condition Record Price is not updated in Inforecord

Dear Experts
For a material , the price in the condituion record is maintained as below.But in the info record the value is showing as 14 , instead of 10 at present.
Validity from      Validity to      amount
3/2/2008     3/30/2011     14
3/31/2011     3/31/2011     10
4/1/2011     4/30/2011     14
5/1/2011     12/31/9999     10
please help how to get the condition record amount in Inforecord.
Thanks
chandra

Hi Chandra,
You should run the program "RM06INP0" with SE38 to update the latest prices in PIR.

Moving Avg Price is not updating in material master even after PO GR

Dear Gurus,
All of the materials in our company won't update the MAP even after the goods movement, and the Price control is set as 'V'.
Can anybody give me the idea how to track the IMG setting?
Jamie

Check the Mat type
Check Qty , value update is active .
Please give the above details
MAP works as below- Is your understanding correct ?. From then current stock position and Inv value , When you do GR for 30 qty at $300 / EA. MAP is moved from 300 to 301
Item
Qty
MAP
Stock Value
Current
       1,000
          300
       300,000
GR done for 30 Qty with price 330/Ea
       1,030
          301
       309,900

Catlog item price is not updated after pubishing catalog sucessfully

Hi,
Hi All,
Our user has updated catalog item price for sullplier and published successfully long ago, but when ever user creating Shopping cart fro that catalog then item price is still showing old price instead of new price.
Request you to any one advice me, how to solve this issue?
Many Tnaks,
Venkat

is the TREX running ??
In your SRM system go to transaction SM59 and under TCP/IP-Connections search for destination called
TREXDEFAULT_REG, double-click on it and click on connection test button (your destination might have a different name).
Please check following table entries.
/CCM/D_CTLG_REQ SE
/CCM/D_IDX_META inactive index
/CCM/D_IDX_CHAR any entries for inactive index ?
are u publshing the entire master catalog ?? or part of it ??
thanks
-Adrivit

Price Change not updating

I changed my prices in Adobe Forms Central, but the price changes are not reflected in the test page or on my website. What should I do to fix this?

[discussion moved to FormsCentral forum]

Price in orders not updated by DTW

Hi experts,
I'm trying to update price in order lines with DTW 88.0.11
The DTW returns no error but the price is not updated.
During the DTW, I saw in the tab 'Target Data' of the step 5, the row 'price' with the new value.
Is there a good reason for the data not been updated?
Regards,
Francis

Hi Jim,
Thanks for your answer.
I've thought to use your solution if no better one.
But I would have to calculate this price after VAT. It's possible but no simple...
Best Regards,
Francis

Moving Average Price and Total Stock not updated for MTO scenario

We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
2)Moving average price does not updated after periodic settlement is carried out.
It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
p/s: on ECC5 system.

Hi,
Good morning and greetings,
The standard SAP says as below
The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Valuation Type Price not updating in the PR

We are using two valuation types for a material.
Valuation type(New)in Material master has some price value in it Ex: 50 dollars per unit and Valuation type (Expense) is with Zero value.
While creating a Purchase Requisition,default valuation type(New) gets updated and if we change the valuation type to (Expense) in the PR,there is no change in the Price.Actually the price should be Zero as defined in Material Master.
Why the price is not updating ????
Apperciating ur immediate response.

Hi,
During PR creation, Valuation Price is to be maintained derogatorily and generally it gets defaulted from Material Master.
Once the Valuation Type "NEW" is getting defaulted in PR then it is copying the price from this and after changing the valuation type it doesn't change the Price since the valuation price obligation has already been fulfilled.
So if you will stop defaulting the Valuation Type "NEW" for the material then it will ask Valuation type in PR and then it will pick up the price for that Valuation type.
Default Valuation Type is maintained in OMWC
Go to OMWC, there click on "Global Categories", here position cursor on the Valuation category (Maintained for Material Master) and click on "Change" button, here check have you entered any Valuation type "NEW" in field "Default: val.type ext.procure."

Actual activity price not updating in production order

Hi All,
I am facing one problem, that actual price for activities are not updating in production order while plan price are updated. Earlier both plan and activity prices were getting upadated but now actual price is not updating for any material. I have tried at the same material also but it is not getting updated. Actual hours are updated in confirmation of production order but not price. If somebody could suggest the reason it will be great.

Dear Nitin,
Thanx to all for valuable input. Problem is solved.
Nice to see That your problem is solved
But Can you let the Forum Members know
where was the exact problem & how it is solved
Regards
Madhu Kumar

When Changing the quantity on a product the price displayed is not updating

Hi all,
When playing around with products on the front of the site we have noticed that the {totalprice} tag does not update if the quantity is changed, does anyone know why this may be happening or a fix for this issue?
Thanks,
Tom

Hi Tom, On the large or small product layouts this price does not update. It is the total of 1 item. If you view the cart you will see the updated value based on multiple items.
This is always been part of BC and not something that is broken.
If you want the price to dynamcially change when you select 2,3,4 items on say the large product layout you will need to create some javascript.
If you are refering to the cart - make a backup of the changes you have done and restore the cart to default. You will see the correct tags and working functionality. if that works compared to what you have carefull review your changes to find what you change to break the functionality.

Condition value not updated when qty changed

hi all,
I have created a new condition ZPR1 (copied from PR00) and use a new formula for it.
There is a problem when I change the qty after the item is billed.
Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the ZPR1 price is still 100! It will change to 200 if the item is not billed.
Anybody encounters such problem and how to solve?
Thanks

Hi,
I don't mean to change the unit price.
I mean the condition value (the item total price) is not updated
You can't change the price anymore in the condition tab after you billed
But when you change the qty of the item, the total value should change accordingly
And I think for my case I should not cancel the invoice. Suppose original qty is 10, and there is partial shipment of 7 and billed the customer. Later customer request to reduce the qty to 7 to complete the item. We should not cancel the invoice in this case.
Try to test with PR00 and PN00, you will see the item value will be changed according to the item qty.

Inforecord Efective price is not Updating

Similar Messages

Maybe you are looking for