Inforecords at plant level

Hello,
My client has presently 2 company codes and 2 pur org assinged to them. Example is - one company cdoe FFI, assinged to pur org FFSO. other company code JMC asinged to pur org J001 recently.
One material / vendor combination is maintianed in inforecord for 2 plants KS06 (belonging to FFI company code) ad SD45 (belonging to JMC company code). Tax code is maintained different for these 2 combinations. For KS06 it is mainained as I0 and for SD45 it is maintaine das I1.
When user creates the new purchase order, I1 is defaulted in all po irrespective of any plant.
user wants to restrict maintain taxable status of material to  specif plant. Is this possible from configuration?
He wants that when PO is created with KS06, IO should only be defaulted. and when it is created for SD45, I1 shold be defaulted
Thanks
MAdhura
SAP MM/WM consultant

Most likely there is some access sequence on the tax condition type which resulting in the issue you are facing. Find it out and then create a new access with plant parameter and keep it as the first item to accessed in the corresponding access sequence. After this you have to maintain the condition records using MEK1 for each plants and then the defaulting will work exactly as expected.

Similar Messages

  • Info Record create at Plant level at the time of PO

    HI,
    Is the system create the Inforecord at plant level not at P.Org level.Problem is system can create the Inforecord at P.Org Level.
    If possibility that system create the Inforecord at plant level at the time of create the P.O.
    What  setting need to configure in the system.
    Thanks & Regards,
    Andra

    Hi,
    Go in transaction OMF0 and change the condition control as plant level
    for all those plants where the info records should be maintained at
    plant level. This will solve your problem.
    regards,
    JP

  • Inforecord - only plant relevant conditions

    Hi Experts,
    could any of You pls help me with an inforecord condition issue?
    I would like to use plant AND purchasing organisational relevant inforecord - both are necessary. I have configured the V_001W_K table (Activate condition Maintenance for Plant), but somehow i did not end up at the desired state:
    if I set to a plant - no Plant relevant conditions are allowed - I can not create an inforecord assigned to a plant - which is OK But if I added - only plant relevant conditions are allowed - I was still able to create an inforecord with price conditions with no plant - I expected, this would be forbidden as well. (purch organisation : plant - N:1 - so plant could be mandantory).
    Now users keep creating inforecords with and without plant - which should be stopped, preferably to create only purch org AND plant relevant data.
    Could any of You pls tell me, what I miss: setting or misunderstanding the configuration possibilities.
    Answers will be appreciated

    This bit of config (help text below) ? If so then a misunderstanding.  The setting relates to Conditions, not whether the PIR are set per Plant in themselves.
    Indicator: Conditions at plant level
    Determines how prices and conditions are stored for the relevant plant.
    Use
    If conditions are allowed at plant level, you must create purchasing info records and contract items relating to the plant. Centrally agreed contracts cannot then be created.
    If conditions are not allowed at plant level, you may not create any purchasing info records or contract items relating specifically to the plant.
    If conditions are allowed with or without a plant, you can create purchasing info records that either do or do not relate specifically to the plant.

  • Payment Terms fetch Issue(Plant Level) @ SRM 7.0

    Hello Experts,
    We are currently implementing SRM 7.0 system(Classical Scenario) across regions.In one such scenario we found out that when we create a PO directly in SRM the Payment Terms is fetched correctly from the Vendor Master at Plant Level(Bypassing the Purch Org Level data, since Standard SAP looks for plant specific data & the same has been implemented in SRM by enahancing the BADI BBP_DOC_CHANGE_BADI (Implementation ZBBP_DOC_CHANGE_PO ,Method :- BBP_PO_CHANGE using a Custom FM with SQL Query on LFM2)
    However when a PO is ordered via the Shopping Cart method,the payment term is fetched at Purch org level,even though we have an Alternative Data(at Plant level) in R/3.
    The Header & Item Level Data are the same.for both the PO's. Can someone please give some pointers on fixing this issue.As we know from SAP,fetching Plant related Payment Term into SRM is not a SAP Standard Feature & thus a custom logic was implemented.Payment Term Table(BBP_PAYTERM) is updated with the latest data with all Payment Term translations maintained in R/3.
    Awaiting your suggestions.
    Thanks,
    Arnab Sinha
    Shanghai,China

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • MCHB,MARD - Stock available at plant level and storage location level

    Hi ,
    How to determine how much stock available at Storage location level and Plant level. (Lot is not maintained).
    In MCHB-Stock at lot level is shown.
    In MARD-Stock at Storage Location level is shown lncluding
    the stock maintaned at the lot level.
    If i want to know the stock which is not maintained in Lot, i.e, Stocks directly maintained at Storage location / Plant.
    Do I need to subtract the MCHB Value from MARD Value ?
    Is there any other way available to find the stocks which is not maintained at lot level.
    Regards
    Prasath

    Hi prashant,
    What do u mean by stock maintained at SL level without batch level.  Do u mean that some materials are subjected to batch management and some or not?
    If that is the case, for all batch managed materials, u can see the stock at batch level and also same is summed up at SL level.  But still what ever u are getting from MARD table isstock at SL level only.
    If u have activated batch management for any material, it will always be shown at lot level also.
    hope this clarfifies query
    award points if found useful

  • STOCK QUNTITY on posting date at a plant level

    I need the stock quntity , issue quntity , reciept quntity and averege quantity at <b>plant level</b> for a period of<b> week</b>, and <b>month</b>
    Is there any function that can do it or any table that has those detailes or any program?

    Hi,
    Check S031 table. It is a LIS info structure which store all goods movements in your system. But the key would based be on the variant your system configured to. I mean it will be either by Fiscal period/ Week/ Calendar Month for plant material.
    Hope this will give you some clue.
    Regards,
    Nagaraju Chidurupalli.

  • Order split- at plant level

    My client have 3 plants at different location. My client requirement is Every month he will receive order from his customers in one predefined format. That order should be copied into sales order ( VA 01) automatically. After receiving sales order, at the time of delivery , that delivery should be processed at plant level as per availability of products delivery . They are producing different products at different plant. Please explain me how it is possible into SAP. Thank in advance

    Regarding SOs:
    You can try out by scheduling batch jobs periodically.
    Regarding Av. Chk :
    1)Av chk happens at plant level only.
    2) Av chk, according to ATP logic, will consider ONLY one/Single plant.
    3) If you want Av chk across multiple plants, you must consider "Rule based Av. chk". For this APO must be connected to your system, where the Av chk takes place & the results are transferred to your system.
    Hope , you are clear now.
    Rgds
    Sumanth.G

  • Planned order not getting generated at plant level

    Hi experts,
          When i run MRP for a particular plant in T- code (MD01) Planned order is not getting generated but when MRP is done against a material in T - code (MD02) in the same plant planned order gets generated... Is there any customizing  to generate planned order in plant level.....
    Regards,
    Joseph.
    Edited by: joseph5885 on Aug 12, 2010 9:23 AM

    Dear Joseph,
    No it is not recommended. only in emergance cases this will be done
    Usually in MDRE and MDAB will be scheduled before MRP run at background for inconistancies in planning file enries
    So the above said t-codes will take care of the same
    Added
    Refer this link
    [Planning file entry;
    Regards
    Madhu
    Edited by: K.Madhu Kumar on Aug 12, 2010 6:53 AM

  • Activating auto PO Check Box in the purchasing view for plant level.

    Hi Techies,
    Right now i have an issue related to auto PO check box in the purchasing view for the plant level. There are three plants A,B,C.. For the plants A and B the automatic PO check box is visible and the user is able to provide input values. But when it comes to plant C the auto PO field is not available and hence the user is unable to provide input for auto PO.
    Is there any configuration to be done to activate the auto PO check box in the purchasing view in the material master with respect to plant C?
    If so could you please guide me with the settings?
    Thanking you in advance.
    Regards,
    Gopalakrishnan.S
    Edited by: krishu100 on Jul 13, 2011 2:25 AM

    Hi Techies thanks for you all info.
    Now today i just tried to created a new HALB Material in the plant C which i had issues yesterday. But when i created today a new material the Auto PO feild is available for entry. THen i tried to go to the material which i created yesterday for editing it. But i was unable to do it.
    I checked the transactions which most of you referred(Very Useful). I found that all the plant s had the same screen selction setting and set as Opt Entry. The field screen referrence for MM01, MM02 Transaction s are also set as opt entry. The screen reference for HALB is also set as Opt entry. Still i m not able to find the field auto PO in the purchasing field.
    So does it mean that a material once created without auto PO enabled or visible can never be updated after that? But i think its not the case and we should be able to edit it(correct me if im wrong).
    Really having my fingers crossed to find a solution for this issue.
    Regards,
    Gopalakrishnan.S

  • Mass deletion of material master at plant level

    Hi,
    Is there any way to flag materials nearly 500 Nos for deletion at plant level.
    Regards,
    Vengat

    hi,
    Use mass transaction for putting the delete indicator for the material master...this is to be done from MM17 tcode...
    and later they all could archived...Archive it from MM71 and can display this from MM72..
    Regards
    Priyanka.P

  • Batch management level change to plant level

    Hi,
    Currently,i am using batch managment at material level.I have created material and has its stocks.
    I need to convert it to plant level..How can i convert it to plant level?
    Thanks
    Srini

    Hi,
    Please check the OSS Note 41715 - Resetting batch level from material to plant level.
    Hope it helps you.
    Kuber

  • Batch Management @ Plant level in ECC 6.0

    Hi,
        I want activate the Batch Management @ Plant level in ECC 6.0 and when select the Plant level and save it , i am getting the information error like " THIS Type of conversion is not Yet Activated" .
    So i needs to activat @ plant level , what i needs to do for further.........
    Thanks & Regards

    Defining Batch Level
    Use
    This transaction enables you to set the batch level for batch management. Three unique options for a material are available:
    u2022     At plant level
    u2022     At material level
    u2022     At client level
    Prerequisites
    If the material or client level for a material is chosen, check that no materials exist in stock. If a material exists in stock, the level may not be changeable.
    IMG Menu     Logistics - General >  Batch Management > Specify Batch Level and Activate Status Management
    Transaction Cod >> OMCE

  • How to assign sampling procedure at plant level.

    Hi Team,
    Pls suggest me "How to assign sampling procedure at plant level."
    Error message is  -  You can not use sampling procedure here.
    Not all sampling procedures can be used in this context.
    Example:
    Only the sampling procedures for an attributive inspection based on the
    number of nonconforming units are allowed.
    However I have assigned 0.05% sampling procedure in IDES system plant, which is accepted. However I am not allowed to assign this in client system..
    Pls suggest me solution.
    Thanks

    Hi,
       During creation of inspection plan you can assign SP at plant level, IP always at plant level
    Q.Error message is - You can not use sampling procedure here.
    ---> pl check the MIC where Sampling procedure in clicked or not
           pl revert
    Cheers,

  • Trial Balance, P&L and Balance sheet at plant level and profit center Level

    HI Expert,
    My Client has multiple plants under same company code, hence need the Trial balance, P&L and Balance sheet at plant level
    Is it possible in sap to have the Plant level financial report without using the Business area concept.
    Secondly  each product is identified as profit center and in every transactions each transaction is corectly mapped to profit center, without using the F.5d (Transfer the BS items to Profit center) will it be possible to have the Trial balance, P&L a/c
    and Balance sheet at profit center level. If possible what is the T-code which will give such reports.
    Thanks & Regards
    Veda Pandit
    9844769403

    plant is not an FI concept, you need Business Area's
    any PC report should show revenue, COGS. BS items need to be transferred.

  • Seperate Inco Terms on at Plant level

    Hi
    I am new to this forum and I need your help to find out if there are any quick solution to my below issue. Our business has a requirement where there would be a new plant rolled-out under the same company code but having a different delivery address so for any external purchasing from Vendors, they are suggesting we have a new Purchase Organisation in order to in-corporate a seperate Inco-terms so it would appear on the PO print. I am not sure if this is the correct solution as because that would be lot of work in terms of Master data creation, etc. Instead I proposed we could maintain Inco-terms at Plant level in the PIR's so that would be picked on the PO output. But since we also have A/c assigned PO's and other Service items for which there are no PIR's, how can we handle this situation? Obviously for these orders, the Inco terms are getting picked from the Vendor Master. And I am sure this is not a unique problem as anyone will have the same issue!!
    Could you please tell me if there is any better solution or any user exit which solely handle these type of situations? We are on ECC 6.0 btw.
    Thanks in advance
    Cath

    Hi Ajit / Jurgen
    Your valuable answers pointed me to the right direction, many thanks for that!! When we wish to raise a PO with A/C assignment (free text items) or for service items, the concept of Inco terms does not arise. So in these cases, the Alternative data in the Purchasing view of Vendor Master really helps to have different sets of data with the plant combinations. So when I maintained different Inco terms for two seperate plants for the same Vendor (even though he is with different Company Codes!), I could able to create two PO's with outputs showing different Inco terms. So this test proves what I am aiming for and clear any confusions (I am talking about me
    Thanks once again guys
    Cath

Maybe you are looking for