Informatica work flow not connecting to integration service

Hi I am OBIEE admin, i am having the following error when i am trying to run workflow manually.
Informatica work flow not connectied to integration service,
Pls help me asap

Do this:
Open Workflow manager or If it is already opened...then disconnect all the folders...
1. Click on the folder you want to connect
2. Go to 'Service' tab and select "Assign Integration Service"
3. This will open "Assign Integration Service" window from where you can choose the Integration Service and can assign the workflows or all workflows. Click "Assign" button to assign the selected Integration Service.
Now connect to the folder and you can run the workflows.
Hope this helps and please mark if it does. :)

Similar Messages

  • DAC Error: Connecting to integration service

    Hi all,
    I have followed all the steps as per the install guide. I went through the forum too but still have the below error. Able to connect to Repository successfully. But error while connecting to Integration service.
    Failure connecting to "_______"
    =====STD output=====
    The command Pingserver is deprecated. Please use command [pingservice] in future.
    Warning: Lost server connection
    Error: Cannot connect to Integration service[host:portno]
    ======Error Output=====
    There is one small change in the config.bat file. in the set JAVA_HOME Instead of using the path "C:\Program Files\Java\jdk1.5.0_07" I have used "C:\orahome\10gR3_2\jdk" since it has no spaces.
    I am not sure if there is any problem with this path since the DAC server and client are running properly.
    Also, when I run
    C:\Documents and Settings\Administrator>pmcmd pingservice -s HostName:6001
    it gives error:
    Informatica(r) PMCMD, version [8.1.1], build [600.0831], Windows 3
    Copyright (c) Informatica Corporation 1994 - 2006
    All Rights Reserved.
    Invoked at Wed Aug 11 14:17:05 2010
    WARNING: Lost server connection.
    ERROR: Cannot connect to Integration Service [HostName:6001].
    Completed at Wed Aug 11 14:17:46 2010
    In environment variables - I have added Informatica bin paths and have also added INFA_DOMAINS_FILE.
    I have read about the 2 EBFs for informatica to be extracted. Do I need them? I am using OBIApps 7.9.5 and Informatica 8.1.1.
    Am not sure what is wrong now.
    Any help is greatly appreciated.
    Thanks.
    Edited by: user522729 on Aug 11, 2010 2:42 AM

    The integration service was running on a different port. Used the correct port and it was working.
    Edited by: user522729 on Aug 16, 2010 4:40 AM

  • BIAPPS 7.9.5.1 Failure connecting to integration service

    Business Intelligence 10.1.3.4.1
    Biapps version 7.9.5.1
    Informática Powercenter 8.1.1
    After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
    http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
    And also copied the Emergency Bug Files in Informatica:
    Informatica Session Completing Successfully, but Still in Running Status
    We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
    "Failure connecting to "integracion_informa"
    STD OUTPUT
    Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
    Copyright (c) Informatica Corporation 1994 - 2008
    All Righst reserved
    Invoked at Fri Apr 16 13:29:52 2010
    The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
    WARNING: Lost server connection.
    ERROR: Cannot connect to Integration Service [integracion_informa:4006]
    Completed at Fri Apr 16 13:29:52 2010
    ERROR OUTPUT"
    cmd window:
    "16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
    INFO: Unknown verification type!
    16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
    INFO: 0 calls to database avoided
    DAC Command Line Utility Invocation"
    There´s no other information about the error. Test connection for repository is correct.
    We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
    Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
    Thanks in advance.
    Edited by: user11179355 on 19-abr-2010 1:46

    We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
    If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
    Is there any place where you can put the domain name value in this version?
    Does anyone know the table where this value is stored?

  • ERROR: Could not connect to WhatsApp service. Please try again later.

    Hi,
    Today there was a connection error with WhatsApp. I needed to send something, so decided to delete and then reinstall the app to try and attempt to fix the connection problem. I am using the iPhone 5C.
    Once I redownloaded the app, I opened it and the app asked me for my phone number. I typed it in.
    But to my surprise, I got this error:
    Could not connect to WhatsApp service. Please try again later.
    After several attempts of writing my phone number (100% in the correct format) I had found no luck or success.
    Anyone else having this error, or is it just me? Please provide some steps on how to fix this if so!
    Thank you

    Thank you for the heads up. It seems like it's working now.
    For everyone with this problem please thank AlbertoRuperto and follow these steps:
    1. Restart your iPhone.
    2. Open WhatsApp.
    3. Enter your phone number.
    4. Enter verification code (if you're a new member) or just click 'Next' if you're a returning user.
    5. Done! All your contacts should be there and your chats (as long as you backed them up).
    P.S. This only applies to people who redownloaded and are stuck on phone verification page.

  • SSIS: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher

    We have SSIS installed on a machine that is not part of a cluster but it is accessible by the cluster.
    Our job we have running on the cluster is failing with the following error:
    Error: 2014-01-31 09:14:37.52     Code: 0xC000F427     Source: SCR - DP1 Connections  
    Description: To run a SSIS package outside of SQL Server Data Tools you must install SCR - DP1 Connections of Integration Services or higher.  End Error
    Any advice or information on how to resolve this would be great.
    Many Thanks.

    Hi NessaBella,
    Integration Services service is not a cluster-aware service, and does not support failover from one cluster node to another. Therefore, in a clustered environment, Integration Services should be installed and started as a stand-alone service on each node
    in the cluster.
    Based on the error message, it seems that SSIS is not installed on the cluster node on which the job was running. Although SSIS is installed on a machine that is not part of the cluster and can be accessed by each cluster node, the SSIS service installed
    on a remote server cannot be used a cluster node. So, please install the shared feature SQL Server Integration Services on each cluster node. Besides, if certain packages need to run in 32-bit mode in certain jobs and the SQL Server installed is 64-bit version,
    you also need to install BIDS/SSDT on the cluster node to get the 32-bit runtime of SSIS.
    References:
    Integration Services (SSIS) in a Cluster
    Loading and Running a Remote Package Programmatically
    Regards,
    Mike Yin
    TechNet Community Support

  • Updates: "Could not connect to the service"

    Hi,
    Every time I click on the software update button in Ovi Suite it seems to be checking for updates, but after a while I get the message
    Could not connect to the service
    There seems to be a problem with connecting to the Nokia Ovi Suite update service. Make sure that your firewall and virus protection settings are correct. Also, make sure that the menu option for working offline is not selected in Internet Explorer. If you still cannot connect, the service may be unavailable. Please try again later.
    I got a similar message with an earlier version of Ovi Suite, so I uninstalled it and installed version 3.0.0.290 manually, but I am still getting this message.
    Thanks

    There has been a problem with Ovi suite where it has used some old GTE CyberTrust certificates from the pc and those old certificates have expired. If you run a trace on a failed Ovi login using wireshark then you might see something like this:
    10.1.1.3              184.27.103.249        SSLv3    Client Hello
    184.27.103.249        10.1.1.3              TCP      https > 4251 [ACK] Seq=1 Ack=89 Win=5840 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Server Hello,
    184.27.103.249        10.1.1.3              SSLv3    Certificate, Server Hello Done
    10.1.1.3              184.27.103.249        TCP      4251 > https [ACK] Seq=89 Ack=1798 Win=64512 Len=0
    10.1.1.3              184.27.103.249        SSLv3    Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
    184.27.103.249        10.1.1.3              SSLv3    Change Cipher Spec, Encrypted Handshake Message
    10.1.1.3              184.27.103.249        TCP      4251 > https [FIN, ACK] Seq=301 Ack=1873 Win=64437 Len=0
    184.27.103.249        10.1.1.3              SSLv3    Encrypted Alert
    10.1.1.3              184.27.103.249        TCP      4251 > https [RST, ACK] Seq=302 Ack=1910 Win=0 Len=0
    10.1.1.3 ========> Windows XP pc behind router with NAT running Nokia Ovi Suite 3.0.0.290.
    184.27.101.249 ==> server in akamaitechnologies.com domain.
    The SSLv3 Encrypted Alert message in the trace might be related to those expired certificates. The workaround is to manually remove those certificates, but I don't think that has worked for everyone.
    It appears that there might have been some improvements in Ovi Suite 3.1.0.84, which is why satari is recommending to upgrade to Ovi Suite 3.1.0.84. If this works for people here, it would be really useful if those people could confirm, so other people can know if that fixed the problem.

  • Could not connect to remote service [rmi://localhost:1099/

    I have a large deployment with two filr appliances and one database and one search index.
    I am running zen load balancer in front of the appliance which works great.
    There are no config changes to the filr appliances in terms of port redirection.
    I had an issue upgrading from 1.0.1 to 1.1 so I blew it away and started fresh.
    After I installed and configured the appliances there were no issues . Now the :9443 configuration section will not work I get
    (this is just the top lines)
    HTTP ERROR 500
    Problem accessing /. Reason:
    Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
    Caused by:
    org.springframework.remoting.RemoteConnectFailureE xception: Could not connect to remote service [rmi://localhost:1099/GangliaService]; nested exception is java.rmi.NoSuchObjectException: no such object in table
    at org.springframework.remoting.rmi.RmiClientIntercep torUtils.convertRmiAccessException(RmiClientInterc eptorUtils.java:190)
    at org.springframework.remoting.rmi.RmiClientIntercep tor.doInvoke(RmiClientInterceptor.java:347)
    This is on all appliances (search,data,filr1,filr2)
    I restarted filr2 and the admin section 9443 comes back for a short time. Maybe 10 minutes then I get the same error. But now after the restart I get and authentication box asking for credentials on 8443. when I put in the admin or other creds it directs me to a page that says
    HTTP Status 500 - Filter execution threw an exception
    type Exception report
    message Filter execution threw an exception
    description The server encountered an internal error that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Filter execution threw an exception
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    root cause
    java.lang.ExceptionInInitializerError
    java.lang.J9VMInternals.initialize(J9VMInternals.j ava:259)
    org.kablink.teaming.asmodule.spring.security.userd etails.DecryptedPasswordUserDetailsService.loadUse rByUsername(DecryptedPasswordUserDetailsService.ja va:51)
    org.springframework.security.web.authentication.http://www.DigestAuthenticationFilte...lter.java:144)
    org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
    org.springframework.security.web.context.SecurityC ontextPersistenceFilter.doFilter(SecurityContextPe rsistenceFilter.java:87)
    org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter(FilterChainProxy.java: 323)
    org.springframework.security.web.FilterChainProxy. doFilter(FilterChainProxy.java:173)
    org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:346)
    org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:259)
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    I have rebooted to no avail. If I restart the jetty service I do get the appliance login for 9443 but if I try to login I get the same message about [rmi://localhost:1099/
    again if I reboot then 9443 works for 10 mins but 8443 gets hosed. Everything worked fine until I rebooted the appliance.
    I am afraid to even reboot these appliances now in fear that the will cease to work.
    I should also note that this was part of the upgrade issue I had after I rebooted all of the appliances.
    Thanks in advance.

    Originally Posted by bschilliger
    The same issue here:
    HTTP Status 500 - Filter execution threw an exception
    type Exception report
    message Filter execution threw an exception
    description The server encountered an internal error that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Filter execution threw an exception
    org.kablink.teaming.webdav.servlet.filter.Resource DispatchFilter.doFilter(ResourceDispatchFilter.jav a:87)
    The password in the FILR appliance configuration 'Outbound E-Mail' was too complex (with special characaters). After changing the special characters with letters and/or numbers, the server starts without any troubles!
    Regards from Switzerland,
    Beat

  • Could not connect to remote service - java.lang.NullPointerException

    Hi,
    I'm struggling to get RMI to work on two servers. Locally my client and server work fine together although when I deploy I get a null pointer exception the first time I try and invoke a remote method. I've tried stopping the server app to see if it is actually connecting at I get a connection refused exception when its stopped so I'm assuming it must be connecting.
    Could not connect to remote service  - java.lang.NullPointerException
    com.jws.remoteServices.RemoteUpdateServer.addNewReport(RemoteUpdateServer.java:61)
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
    java.lang.reflect.Method.invoke(Method.java:616)
    sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
    sun.rmi.transport.Transport$1.run(Transport.java:177)
    java.security.AccessController.doPrivileged(Native Method)
    sun.rmi.transport.Transport.serviceCall(Transport.java:173)
    sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:553)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:808)
    sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:667)
    java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
    java.lang.Thread.run(Thread.java:636)
    sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:273)
    sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:251)
    sun.rmi.server.UnicastRef.invoke(UnicastRef.java:160)
    java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:195)
    java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:149)
    $Proxy0.addNewReport(Unknown Source)
    jasperserver.ReportHandler.run(ReportHandler.java:81)Any help would be greatly appreciated,
    Regards,
    Dan
    Edited by: danblackhust on Jul 18, 2010 3:54 AM

    Show us the code that threw and caught this exception.

  • HTTP Response code 404 - RFC Adapter des not connect to Integration engine

    Hi,
    I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
    Begining of the erorr report -
    2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
    2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
    2006-01-23 13:35:55 Success Trying to put the message into the call queue.
    2006-01-23 13:35:55 Success Message successfully put into the queue.
    2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
    2006-01-23 13:35:55 Success The message status set to DLNG.
    2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
    2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
    2006-01-23 13:35:55 Error The message status set to FAIL.
    2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
    end of error report -
    and the runtime workbench does not connect to Integration engine and fails with the following error,
    begin error report -
    javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
         at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
         at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
         at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
    end of report -
    Have anyone experienced the same issue?. Are we missing some post installation configuration?.
    Thanks in advance
    Regards,
    Arul

    HI Anulraja,
    Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
    Check the Bussiness System in Sld , which you'll have defined for XI Server.
    It should have ROLE : Integration Server And
    pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
    should be this if your http port is 55300.
    Check if this url is right in SLD-Bussiness System.
    You can check the exact http port in transaction sxmb_adm.
    Go to Integration engine configuration and then click on check icon(F7).
    It should match with that provided in the BS in SLD.
    By default it should be 8000.
    Check all these things and then try.
    Regards,
    Yomesh

  • Trigger informatica work flow using process chain

    Hi,
    tell me how to trigger the informatica work flow using the process chains.
    Please tell me the steps.
    Babu

    Currently, we have a custom trigger file on the BW system.  We have a workflow in Informatica that loops periodically and checks the data in this table.  When the file changes, the workflow in Informatica then continues. 
    However, I think a better solution is to use a <i>pmcmd</i> and set up a batch file that runs a command that will schedule your workflow.  You can then put this batch file on the BW server and call it from the process chain (use process OS command).
    The command will look something like this:
    <b>pmcmd scheduleworkflow -s</b> (server)<b> -u</b> (user) <b>-p</b> (password) <b>-f</b> (workflow)
    See Chapter 23 in your Informatica Help on using <i>pmcmd</i>.

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Could not connect to DbaaS Service using the given user name and password.

    I'm not able to create Java Cloud Service (Oracle Java Cloud - Virtual Image Services) for my newly created Oracle Database Cloud Service instance. It fails with
    "Incorrect values entered
    Could not connect to DbaaS Service using the given user name and password.
    Verify that the user name and password are correct and the user name has SYSDBA privileges."
    I'm using SYSTEM user and the password I used during Oracle Database Cloud Service instance creation. I've verified them with sqlplus and also by connecting remotely.
    Java Cloud Service wizard doesn't allow me to proceed to instance creation.

    Hi Alexander,
    Maybe you'll find useful the document from Oracle docs specified bellow regarding Creating an Oracle Java Cloud Instance:
    http://docs.oracle.com/cloud/latest/jcs_gs/JSCUG/GUID-31F00F2C-221F-4069-8E8A-EE48BFEC53A2.htm#JSCUG3128
    Thanks,
    Cristiana.
    #OracleCloud

  • Apple TV3 not working - Can not connect to iTunes, Very, very slow streaming. Help please?

    For just over a week I have been unable to stream film/TV shows from Netflix via my Apple TV. When I have been able to, the streaming is painfully slow... for example, to watch a half hour program I have had to pause it at the beginning and leave it for 30-40mins before I can watch it and even then i'm not guaranteed to be able to watch it all! On top of the streaming issues, I tried to purchase a film from iTunes via the Apple TV - this took 3days to download!! Then finally, last night, it all seemed to stop working - will not connect to iTunes account at all (can not connect to server). I have checked again this morning and the error message says the same thing. My internet connection is fine (perfect on both mac, dell laptop and iPhone. I have tried the obvious troubleshooting methods - nothing has helped.
    Can anyone please tell me whether this is an internal Apple issue and if we know how and when this will be resolved? Or has anyone else had the same problems and been able to resolve them?
    I'm pulling my hair out...

    This would be an issue with your network. Netflix will constantly adapt to your connection. iTunes content is fixed, will cache as you watch, and will need to load a portion before playback begins. As you have not provided information on what you have tried, I will list common things to check.
    What is your current connection, via speedtest.net
    Make sure DNS is set to auto (settings - general - network)
    Make sure router is up to date, if on wifi try ethernet
    Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise

  • Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

    Hi,
    We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
    We need to Protected Primary DPM from Secondary DPM.
    When install DPM agent got error from secondary DPM console.
    “DPM could not connect to the Service Control Manager on these servers ID: 33221”
    Checked till now :
    Visual C++ redistributable installed.
    Checked DNS A record and both server can ping each other,
    Widows Firewall off on both servers.
    Net stop mpssvc ( Windows firewall service)
    sc \\Server1 query
     àable
    to see result
    Thanks,

    Hi
    You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
    Do you have any other AV software that have firewalls built in?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Why won't my internet work when not connected to wifi?

    My internet won't work when not connected to wifi I have been in the Vodafone shop an they tried everything and could not fix it the last option was to restart the iPhone and it still hasn't worked

    What does everything include by Vodafone?
    Did Vodafone check if your iPhone is provisioned properly for data access on their network?
    Has it been this way since day one or a recent problem?

Maybe you are looking for