Information about FI certification

Hi all,
I am planning to write SAP FI certification.
can anybody provide me some good links and also some sample questions regarding FI certification.
if any material is there kindly mail me.
[email protected]
any suggestions regarding FI certification are welcome.
points are guranteed.
regards,
venu.

Hi,
I would advise to have a look at the websites like [sap-fi-certification.info]. There is a lot of useful information about SAP FI Certification there as well as many sample questions.
Good luck!
Ghanem

Similar Messages

Information about SDK certification.

Hi,
Can any one plz provide me information about SDK certification i.e -
     when i can i give this exam ?
     what should be prepared for exam ?
     etc.
At least provide me link for this information.
Regards,
Ganesh

Hi Ganesh,
You have a link to the Certification page from the main B1 page, here you have the direct link:
SAP BUSINESS ONE ADD-ON SOLUTION CERTIFICATION (B1-SDK) [original link is broken]
In there you will find all information regarding certification process.
There is also a presentation about it in the "SAP Business One Tech Summit" link inside eLearning section of Business One page here in SDN.
You have also the possibility to download the tools called B1TE that will be used during certification in the B1 page on SDN.
Hope it helps
Trinidad.

Information about any certification for utilities

Hi,
I am new to utilities and currently working in a project based on it.I wanted to know as there any certification for SAP ISU and what is the fees for it provided by SAP.

Saurabh:
fsutil_60-sap-certified-associate---utilities-with-sap-erp-60 is available for several years now.
regards,
bill.

Need Information for BW Certification

Hi All,
can any body provide the Information to do the BW Certification. How to approach SAP for Certification. Can any body provide the information about Technical Details(what are the Questions), how to approach SAP for Schedule the Test. I know people done their certification through Big companies like IBM, accenture etc. I want to go directly to SAP, i want to pay all the expenses. How much it costs for do the certification.
Please provide the information. Thanks in Advance.
Please guide me.
Regards,
Nagesh.

Nagesh
Check these links also
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420&vid=5
http://www.sap.com/uk/services/education/courses/bw.epx
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=285
http://www50.sap.com/useducation/curriculum/print.asp?jc=1&rid=458
http://www50.sap.com/useducation/certification/examcontent.asp
http://www50.sap.com/useducation/certification/curriculum.asp?rid=506&vid=5
http://www50.sap.com/useducation/certification/curriculum.asp?rid=420
Procedure to become BW certified Professional
BW Training
BW Certification Preperation
BW CERTIFICATION 3.5
Re: SAP BW Certification
/thread/49323 [original link is broken]
BW certification
Thnaks
Sat

Need Information about Oracle DBA 9i Exam

Hi all,
I am from saudi arabia, and i would like to write OCP for 9iDBA. I tried to contact saudi arabia oracle. But no use.
Can any body help regarding to find another center for OCP.
Reply me on [email protected]
Bye
Raj

You can take the exams at any Prometric testcenter.
Online registration is available on http://www.2test.com
More information about OCP can be found on
http://www.oracle.com/education/certification/

Hi all need your guidance about SAP certification & training..

I have done SAP MM certification online training program from Delphi Computec, Pune during 2012. But could not clear the exam.
Now i am thinking about going for second attempt. Can any one suggest if i need more training or just doing the books would be sufficient?
I feel that i should go for some more training for certification purpose, can u suggest any training program that would help me clear my certification.
Please suggest.
Thanks
Vinayak

Hi vinayak as you mention
I have done SAP MM certification online training program from Delphi Computec, Pune during 2012. But could not clear the exam. Now i am thinking about going for second attempt
A lot of changes happen in certification .To get update information please go though Training and Certification Shop A little "search" in SCN can help you to get more information about SAP MM certification.
can u suggest any training program that would help me clear my certification.
Try to engage with the community SAP ERP - Logistics Materials Management (SAP MM).
read Dëv Päträ content blog posts discussions you get clear idea .
hope it helps
poorna

How to get information about creation of a virtual machine on a Hyper-v host.

Hi,
How to get information about creation of a virtual machine on a Hyper-v host?
I need: host name, time created, creator user.
I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
Thank's in advance.
Denius Valiant

For Host Name * Created Time Use This Command In PowerShell
Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
and for Create User , As i know you should see on Event Log .
Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational
You can see in Event Log who create the Vm.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:

A PDF document with information about activation for CS6 software

Here's a PDF document with information about activation for CS6 software.
I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541)

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Apc asset, information about payments and debts to a vendor

Dear sap colleages
I need to know these information about an ASSET:
Purchased orders,
Items from purchase orders,
which of these items i've received, i've paid (also date), i've not paid ( amount of debt related to asset)
payments in advanced (date),
wich of these payments have been cleared (clearing date) and wich not,
who is the vendor,
other expenses (such as delivery)
the amount of taxes,
invoices related and NOT RELATED TO purchase order
payments without invoice
Which transactions do i need to follow?
or
Which document flow?
or
Which tables? Wich keys?
or
Is there a standard report that can give me such information?
Any documentation and/or code will be appreciated.
I need to program a report to integrate all these information.
Thanks and Kind Regards

Hi:
Regarding payments to vendors,refer to FBL1N - Display/Change Line Items .
Select the company code and then open items radio button and today date.It will show what are payments still to be paid to the vendor.If you select cleared items, it will show the payments paid to the vendor.If you select all items radio button, it will show all paid and unpaid payments to the vendor.
Check this report whether it fills your requirment.
When the user posts the business transaction, he has to input all the details, otherwise some of the information may be missing.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

Disable your antivirus and firewall, and try again.

Report with information about release documents in VKM1

Hello
I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
The transaction VKM2 just gives the release date of the document and not the user.
Where I can find more information?
Regards
Daniel Teles

Hi,
There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
regards

Information about SAP Strategy Management (SAP SM)

Hello,
I want to know where I can find information about SAP Strategy Management (SAP SM). This is an application that was bought from PILOT.
Is it easy to customize like the SEM-CPM-BSC????
Is it an addon in the BW or ECC????
Is it all browser type application???
Thank you in advance...
Pablo Mortera.

Greetings Pablo,
Thanks for your interest in SAP Strategy Management (SSM). More information can be found on the BPX site for Corporate Performance Management.
https://www.sdn.sap.com/irj/sdn/bpx-cpm
On that page is a short demonstration of SSM. There are two other sections on that page -"Key Topics" and "Best Practices" have links for more information about Strategy Management.
On the SAP.com global site, there is also information about Strategy Management, including white papers.
http://www.sap.com/solutions/performancemanagement/strategy/index.epx
Please review all this information and let me know if you have additional questions about SAP Strategy Management.
Regards,
Bob

Information about FI certification

Similar Messages

Maybe you are looking for