Information about Future batch jobs

Hello Friends,
when i am trying to see the future date jobs in SAP ISU for example i want to check jobs for 30/02/2009, it also pull ups jobs that are finished but these finished jobs are from previous dates. When i do a search for example for 25/03/2009 to 26/03/2009, shouldnt it only pull up the jobs for that particular day.
My second question is i have been asked to pull up jobs that run on thursday and put them on a spreadsheet, i went to sm37 and put the date and time and it came with only a very few jobs 7 jobs in released and scheduled status, but when i went to the last thursday finished jobs there were around 80 jobs. Why arent all the jobs scheduled for that future thursday are coming up, thanks for your answers

Concerning sm37, these are the jobs which were triggered by an event and therefore run after the event was raised
Like Eric said, you can raise an event on OS-level with program sapevt or by some ABAP-code. The online help will guide you through.
If you want to raise an event after a job is finished, just create another step in the program with some abap raising the event. As i'm no programmer, unfortunately i cannot help you further with that

Similar Messages

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Questions about divulging information about future features

Good morning,
I'm making my way through this thread for the first time.
As someone who has passed the California Bar and who has been a stockbroker in the past, I would like to comment on the statement of Steve Forde, who was the Senior Product Manager for Visual Effects for Adobe for portions of 2011.
Steve said,
"Unfortunately - we get stuck in a legal pinch about commenting on ANYTHING that may or may not be in future products, off the record or otherwise."
I'm asking that you consult your internal SENIOR legal counsel again regarding this statement that you assert prohibits you from giving any details whatsoever about what the Adobe Team may or may not aspire to having in future versions of After Effects.
I'm asking this of you for a couple of reasons.
Firstly, no attorney denies that the law changes over time and recent court decisions have made shareholder derivative lawsuits much less popular as a way for the plaintiff's bar to make a quick buck by extorting money from companies who may have made aspirational statements to shareholders or others in conference calls or elsewhere.
As I understand the current trends in Delaware Law, (which, as the situs for quite a few corporations governs large swaths of their conduct) as long as appropriate disclaimers are clearly communicated at the time of the aspirational statement, such language is now permissible.
Such standard disclaimers could include language such as
"we cannot guarantee whether any feature discussed will appear within one year or within five years or whether it will ever appear at all. It is currently a goal of the design team to reintroduce this feature, but we reserve the right, in our exclusive discretion to change that decision for any reason whatsoever, without consequence.
Additionally, you are vested with no rights to rely on any assertion or representation made based on any such aspirational statement and we insist and demand you consult an attorney before embarking on any course of conduct, such as purchasing stock or altering any current or projected business plan, based in any manner upon what we say here.
However, given the above caveats, it is the current goal of the Adobe design team to reintroduce this feature within the next three releases of AE again, subject to change at our sole and exclusive direction in any manner, time or mode of our choosing, without prior notice of any kind."
If you had a standard disclaimer such as the above that you attached to any and all such statements (by having it appear within the signature block of any Adobe employee posting to this forum), it could take conversations such as this to a more rewarding level for both Adobe staff (who could share their very profound dreams and aspirations with us) and the Adobe community at large, which provides inspiration and helpful feedback to Adobe employees seeking to assist us.
Then the focus could shift to whether or not you were divulging trade secrets. But it would still permit you to be more informative in a general way.
So I ask that you run this by your SENIOR legal counsel again. Remember, just as there can be different ways to tackle the same 3D graphics animation challenge, each with rewarding results, attorneys similarly can vary from attorney to attorney and new and bright ideas on how to approach such issues do occur from time to time, especially in light of the massive favorable swings in case law supporting the rights of massive global corporations such as Adobe viz a viz the rights of the little guy.
Sincerely, Matt Dubuque
Here is Steve's quote in its entirety, from May 26, 2011:
Unfortunately - we get stuck in a legal pinch about commenting on ANYTHING that may or may not be in future products, off the record or otherwise.
That being said, as Michael explained in a previous post, Vector Paint got stuck in the conversion of AE to 64 bit. It's something we hear quite a bit from our users that Vector Paint is important. Again - wish I could give you more than that, but we are bound by very strict rules.
Therefore - it is important to us, and the more we hear via this form the more likely it is to get resources behind it in a future release. Again I realize it is impersonal, but the results of this form are sent via email to a real human every time someone hits submit; then that person brings the results of submission to a weekly meeting on the AE team where we discuss features and scheduling.
Steve
Sr. Product Manager - Visual Effects
Adobe Systems Inc.

Attaching an appropriate disclaimer may be fine for an attorney to dot all the i's and cross all the t's, but there is one thing it will NOT do: it won't stop people from misinterpreting what they read.
Most people go by what they PERCEIVE to be true and not the ACTUAL truth, a fact that people in marketing like me deal with all the time.
Steve Forde might write the following totally hypothetical and totally fictional line in a blog:
"We're thinking about a feature for a future version. Right now we call it the Clean Plate Generator. You would be able to shoot a single clip, panning and tilting the camera as desired, and After Effects would automatically create an image whose total size matches the totality of the image shot in the clip. It would even remove selected foreground subjects such as a stray person who inadvertantly walks into the shot."
Sounds great, yes? And with your proposed disclaimer, all would be good; Adobe would have covered its corporate pink posterior. Or would it?
Do you wish to speculate how many people would read that as a statement of a definitely-going-to-be-there feature in the next AE version?
Can you imagine the can of worms that would open when this fictional feature isn't in the next version?
Would it really be worth the massive and expensive fence-mending campaign Adobe would have to undertake among angry users who were erroneously looking forward to this fictional feature?
All of which could have been avoided simply by not saying a word?
I can see where attorneys may like a hypothetical situation as the one above: they could charge more billable hours! I doubt Adobe would like it, however.
Legalese is one thing, maintaining happy customers is another, and there is no amount of legalese that can overcome people's nasty tendancy to perceive what they read as what they WANT to read instead of what is actually written.
If people would read what was actually written, there would be far fewer posts in this forum that say in essence, "Hey, how come it takes two weeks to render ray tracing on the brand-new HP student laptop I just got from Wal-Mart?"

Information about default scheduler jobs.

Hi All,
Can someone please let me know what the below jobs are useful for, and what will be the impact of disabling them.
EM_AUDIT_EXT_SCHED_JOB
EM_AVAIL_UNKNOWN_STUCK
EM_BEACON_GENSVC_AVAIL
EM_BSLN_COMPUTE_STATS
EM_BSLN_SET_THRESHOLDS
EM_DAILY_MAINTENANCE
EM_DERIV_RETRY_ACTIONS_JOB
EM_ECM_VCPU_JOB
EM_FEATURE_USE_COLL
EM_GATHER_SYSMAN_STATS
EM_PING_MARK_NODE_STATUS
EM_PURGE_POLICIES
EM_PURGE_RCA_RESULTS
EM_REPOS_SEV_EVAL
EM_ROLLUP_SCHED_JOB'
EM_SLM_CALENDAR_UPDATE
EM_SLM_COMP_SCHED_JOB
EM_SLM_UPDATE_CALNEDAR
EM_SYSTEM_MEMBER_SYNUP
EM_TASK_RESUBMIT_FAILED
EM_TASK_WORKER_43
EM_TASK_WORKER_44
EM_TASK_WORKER_45
EM_TASK_WORKER_7
EM_TASK_WORKER_8
EM_TGT_PROP_CONF_PP
SYSTEM.GATHERSTATS_1534051
SYSTEM.GATHERSTATS_8107742
Thanks and Regards,
Akshay M.

Hi,
By their name we can assume they are Entreprise Manager related jobs. These are probably the jobs meant to keep EM metrics up-to-date.
If you don't use EM at all then I would think they can be disabled. That being said, if they are not particularly bothering you then just let them live their lives.

A JavaBean that gives information about a job - saving parameter problem

Hi,
I'm working on a Java-Applet that gives the user some information about the running job.
I modified a solution from Casey Bowden (thx to him) that lanches a seperate applet, from the current forms session, to update the user on the status of the report. It works great but I have one more problem.
If the Report getting an error, the programmer and organisator would like to replicate the error so it would be comfortable to see how the report get started. There is the RW_SERVER_JOB_QUEUE table that saves all the information the Report Server posts its information about the current report to the database each time a job request is submitted. I'm saving some information from the rw_server_job_queue in a seperate table with other specific information for our own administration.
The only information that I don't get are the parameters the report getting started. I would like to save all parameters in one column like the command_line in RW_SERVER_JOB_QUEUE table each time a job request is submitted. Is there any solution to get the parameters from the starting report?
I'm working with Oracle Forms 6i and Reports 6i.
Thx for any help.

Hello,
To call a Palestine # on Skype dial 970 + Area Code + 7 digits (local number)
Do NOT dial the "00" prefix.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

CIF Batch jobs and LUW

Hi Experts,
Can anyone tell me about CIF Batch jobs and LUW please. Explain these two in detail whether they are the same or any difference and any relationship between both.
Thanks in advance
Suvecha

Hi
LUW stands for Logical Unit of work.
Its a way of binding data together(multiple CIF queues under a single entity)
It is useful to maintain the atomicity of data.
For ex :- Say u have 5 materials under a single TLB order and u have sent that order to R3 for recieving number.If any of those materials is having master data which doesn't satisfy the filter criteria for Integration Model then the whole LUW will be blocked.
Signifies the entire data set will be passed on as a single LUW.
For CIF batch Jobs could you please explain what exactly you want to know.
Thanks
Amulya

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

Problem in creating Batch job for programs in different servers.

Hi All,
I have a requirement like i have 2 different programs ( PRG1,PRG2 ) running in 3 different SAP servers (SER1,SER2,SER3).
I want to create a batch job for the programs.
Here When I run the PRG1 in Server SER1,it will create a file1 in SER1 as well as the other 2 servers (SER2 and SER3).
It just create a file and there is no content in the file.Once i start writing records to file1in SER1,the same record will be started writing in SER2 and SER3.This is using PRG1.
Once PRG1 will complete writing records in file,Next PRG2 will run in SER2 using file created by PRG1.
I want to create a batch job for PRG1.
How to trigger the PRG2 after completing job1 for PRG1 without any manual interaction.
Please help me for this.

Hi Ambili
You can set steps in these jobs in transaction SM36.
You can define that Job 2 starts after Job1 complete sucessfully and same game for other jobs.
Please, check attachment for detailed information about that
Kind regards
Edited by: Carlos Machado on May 27, 2010 6:01 PM

How to view ALL batch job details (SM37) at one glance ?

Dear all,
I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
Thanks.
Advice and comment will be appreciated.
Regards,
Kent

Dear Prashanth,
Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
JOBNAME = Background job name
SDLSTRTDT = Planned Start Date for Background Job
SDLSTRTTM = Planned start time for background Job
SDLUNAME = Initiator of job/step scheduling
PRDMINS = Duration period (in minutes) for a batch job
PRDHOURS = Duration period (in hours) for a batch job
PRDDAYS = Duration (in days) of DBA action
PRDWEEKS = Duration period (in weeks) for a batch job
PRDMONTHS = Duration period (in months) for a batch job
PERIODIC = Periodic jobs indicator ('X')
STATUS = State of Background Job, S = Released, F = Finished
AUTHCKMAN = Background client for authorization check
EVENTID = Background Processing Event
EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
Dear Juan,
Thanks for your reply.
Regards,
Kent

Why am getting this ME083 error in BATCH JOB, where as ONLINE not getting?

Hi Experts,
Am creating Purchse Requisation by using BAPI ---> BAPI_PR_CREATE.
If I run ONLINE, Purchse Requisations are creating in EBAN table, with out any erorr messages, fine.
If the same prog. is scheduled as BATCH JOB in production, the Purchse Requisations are creating, fine, but, there is a ERROR MESSAGE in JOB LOG, saying that " ENTER PLANT " of M essage ID& # is "ME 083 "
So, let me know that,
1 - Why am not getting this error message, If I run it ONLINE?
2 - Even though there r error message in JOB LOG (as I mentione din the above), Why the Purc. requisations are creating?
3 - How to track that, from Where this error is coming in BATCH JOB, How to debug the BATCH JOB, after its scheduling?
4 - How to fix it?

It is not uncommon for informational/warning messages to appear when a BAPI is run in batch.
Such messages do not prevent the completion of a job, but may provide information about the status of processing.
When you run the job online the message may just flash briefly on the bottom of the screen, and you might not even notice it.
I get similar messages when I run other BAPIs, where the message is logged but the process continues to run.
To address the question of the message itself, if you look at the code underlying the BAPI, for example, include L2105I01, which contains the methods, you can see the place where the message is issued.
The message is issued if field PR_TYPE in the header structure is initial.
This is fairly easy to find just by examining the source behind the BAPI and the methods that it uses.
You can navigate to include L2105I01 just by clicking on Method process in BAPI_PR_CREATE, just as you can with any other navigable object in ABAP.
You should see this in BAPI_PR_CREATE around line 108.
CALL METHOD l_ref_bapi->process( ).
Double click on process.
Method renumbering is then called by Method process if the actyp = hin (a constant meaning add/create which is set in BAPI_PR_CREATE), and if ITEM_INTVL (Item number interval) is not initial.
Double click on Method renumbering.
Method renumbering then checks if field PR_TYPE is initial, and if it is, then the message 083 that you are getting will be issued. You will also see that the message is issued as a warning only, which is why the document is still created.
You can drill down through the code by double clicking, as usual with navigation.
I found this initially by clicking method set_header, which brought up the include with the method code. I then searched for 083, which is the message id. I then backtracked to find out what the path to Method renumbering was.
Always do a little digging in the source, the message has to come from somewhere. If the first search does not get a hit, try the next one until you exhaust the possibilities. I chose set_header, since it appeared to be specific to the function of the BAPI, and something like that will usually be the best place to start. In this case, it took me right to it.
Brian

Class is not appearing in "Java Batch Job Class Search" when trying to add.

Hi,
I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
Steps are as follows:
1-Created file by copying the exiting file
CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
public class CmCreateLatePaymentChargesProcess
extends CmCreateLatePaymentChargesProcess_Gen
File location :
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
2-Run ApplyCm build successfully , which generated these files:
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
All the above classes are part of CM.jar file
ContextManagedObjects.xml ; contains these information
<com.splwg.shared.environ.ContextManagedObjectData>;
<domainPackages/>
<lookupFieldClasses class="tree-map">
<no-comparator/>
</lookupFieldClasses>
<cobolAlgorithmInterfaceExtensions class="tree-map">
<no-comparator/>
</cobolAlgorithmInterfaceExtensions>
</com.splwg.shared.environ.ContextManagedObjectData>;
packageMetaInfo.xml was not created
Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
I tried restarting the Tomcat application server, still not appearing.
Where did I go wrong about it?
Thanks
Edited by: cc&amp;amp;b-user on Jul 29, 2011 12:39 AM
Edited by: ccb-user on Aug 2, 2011 9:28 PM
Edited by: ccb-user on Aug 7, 2011 11:36 PM

Hi,
Did you copying the base file CreateLatePaymentChargesProcess.java?
I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
The batch is working fine in my end.
Thanks,
Atul Singh.

Sessions from apex are blocking by batch job

Hi All,
In my 10.2.0.3 linux with apex 3.1.1
We have a batch job using a package,that is doing DML operation in tables depends upon some condition.And this job will run daily 5 hours.
The sessions from apex that is also using some procedures in the same package.Some days the sessions from apex are blocking by batch job.While blocking wait event from apex sessions are 'library cache pin'.Once the batch job completes then automatically removes the block.
What may be the reason?
Thanks in Advance,
Sunil

The query against v$lock is not relevant if the blocked sessions are waiting on "library cache pin" - so you seem to have two separate problems.
If you have a session waiting on another session's transaction slot in mode 4 there are several possible causes - often related to indexes, but there are a couple of "internal" problems as well. If you see this locking issue again some of the simplest things to check for would be session 1 inserting (without commit) some rows in a table with a unique key, and session 2 then trying to insert a duplicate. Session 2 has to wait for session 1 to commit or rollback before deciding whether to return a "duplicate key" error, or to continue processing.
The "library cache pin" waits suggest that the package had become invalid while the batch job is running it, and one of the Apex jobs is trying to recompile it. But if the batch job is currently running (hence pinning) the "executable", then the Apex job can't get the necessary exlusive pin until the batch job ends and releases its pin.
Read the notes in the script $ORACLE_HOME/rdbms/admin/catblock.sql about creating views that let you see more of the information about library cache (KGL) locks and pins.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
"Science is more than a body of knowledge; it is a way of thinking"
Carl Sagan

OFFICIAL APPLE INFORMATION ABOUT COMPATIBILITY WITH EXPLORER

Hi,I have problems with incompatibility with IE 6+7. In my coutry is 80% people on IE. Every schools, iCaffe etc.Is very, very big problem with iWeb'08 - I make a lot of job but after this is result..........incompatible.Is some OFFICAL INFORMATION FROM APPLE about future plans compatible with IE? I'm looking for programs with similar function as iWeb - RapidWeaver, Sandvox etc. - but NEVER I see better program - iWeb is still my favorite, is nice design concept, maximum intuitive, and very user friendly Thank for your oppinion! Blacky
Message was edited by: yamahacb
Message was edited by: yamahacb

Here are some tips I've gathered from this forum on how to make sites more compatible with IE.
1 - do not use and frames or borders, etc. around photos.
2 - don't use any reflections.
3 - create your own navigation bar with linked text* and turn of the iWeb Navigation bar. That's because the nav bar is all png based.
*Put your linked text directly under the Navigation bar. Then turn off the nav bar in the Inspector window. The nav bar will disappear and the linked text will move up to the top of the page as seen in this screenshot.
4 - use only the web safe fonts from the Font pane.
5 - do not use drop shadow on fonts.
6 - turn off smart quotes
7 - if you add a jpg to a page don't resize it in iWeb as that will cause it to be converted to png. Resize it to what you need before adding to the page..
The above will reduce the number and size of files associated with a web page quite a bit. Photos with fancy frames and reflections can generate a thumbnail png of around 110KB whereas the plain version will be a jpg of only 28KB. Although it doesn't sound like a lot, it will speed up loading of the page and be more darkside (i.e. PC) friendly.
Run a test with a test site and publish to a folder. Then follow the hints above and publish to another folder and compare folders.
Also there's a site, netrenderer that you can paste your site's url into an entry field and it will display how the various versions of IE will display your site. I don't know how accurate it is but may give you an idea of where problems areas are.

Tool for creating batch jobs

Hello,
I need to create a batch job, which is having round about 90--100 steps, so is there any tool, by which i can create this quickly?
Please help me, this is little urgent.
Thanks,
Anand.

Hi anand,
CATT/ECATT is the best tool for creating batch jobs.
For more information on how to use these tools, go through the below links.
http://www.*********************/tutorials/secat.htm
http://www.*********************/tutorials/scat.htm
Regards,
Bharath

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Information about Future batch jobs

Similar Messages

Maybe you are looking for