Information about fwdservice dot com?
Note that urls in this post are deliberately obfuscated.
Earlier today I tried to access www <dot> casponline <dot> org which is supposed to be the site of the California Association of School Psychologists. When I had trouble viewing content, I enabled javascript for two sites the page seemed to need: cdn <dot> rooktemplate <dot> com and fwdservice <dot> com. This didn't seem to help much. I went from blank content to perpetual loading.
As far as I can tell fwdservice is associated with Windows malware which redirects attempts to access various webpages to fwdservice's site. I am guessing this simply fails on Linux but does anybody know anything more about this? The information about Windows is what I gleaned from a web search but I am not sure how reliable it is or if there is more to this. Because I was on campus at the time, the university's rule set typically blocks malware sites. (E.g. a link which would take me somewhere at home will be blocked on campus.) Obviously that's only a certain proportion of what's out there, however, so it doesn't show the information isn't reliable.
I am pretty sure that casponline should be a legitimate site or used to be one as I've found links to it from enough kosher-looking pages for it to seem unlikely they are all fake. (And they are always pages about psychological research etc.)
OK. If I ping casponline.org, I get the same ip (68.171.213.42). If I load that ip in my browser and allow it to load the script, it all looks fine. But if I load www.casponline.org, I get nothing and the source code for the page is completely different.
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<script type="text/javascript">var NREUMQ=NREUMQ||[];NREUMQ.push(["mark","firstbyte",new Date().getTime()]);</script><title>Loading...</title>
<script src="http://cdn.rooktemplate.com/rmgdsc/newProcess.js?v3.1" type="text/javascript" language="javascript"></script>
</head>
<body>
<div id="rmgblock"></div>
<script type="text/javascript" id="_rMG_fir">
var _pR="gkwrf="+"",_folio="775974688",_bkt="8171";
var _adPage="<scr"+"ipt id=\"_rMG_dyn\" type=\"text/javascript\" language=\"JavaScript\""+" src=\"http://fwdservice.com/main.php?dmn="+"casponline.org"+"&folio="+_folio+"&"+_pR+"&bkt="+_bkt+"\">"+ "</scr" + "ipt>";
document.write(_adPage);
</script>
<script type="text/javascript">if(!NREUMQ.f){NREUMQ.f=function(){NREUMQ.push(["load",new Date().getTime()]);var e=document.createElement("script");e.type="text/javascript";e.src=(("http:"===document.location.protocol)?"http:":"https:")+"//"+"js-agent.newrelic.com/nr-100.js";document.body.appendChild(e);if(NREUMQ.a)NREUMQ.a();};NREUMQ.a=window.onload;window.onload=NREUMQ.f;};NREUMQ.push(["nrfj","beacon-2.newrelic.com","6bc175e1c8","2059687","blxaMRFVWEFSUENfWVcWbRcKG19cV1ZPGEZRSQ==",0,118,new Date().getTime(),"","","","",""]);</script></body></html>
I get the same result at home as on campus (but I'm on the same machine). So how would my DNS get poisoned and can I unpoison it?
Though if DNS was poisoned, wouldn't it affect ping as well?
EDIT: I just sshed into a machine at work (which I am about to lose, but still for today...) and found that ping www.casponline.com uses an ip address of 107.20.206.69. So could that have been the address I got given earlier when using my laptop on campus? Now I'm home so I get the right result from ping. But why would firefox still use the same ip as earlier? I tried removing the cache but it didn't make any difference. Is there something further I need to do? (And is this likely to indicate a more serious problem?)
The machine I sshed to is running Fedora 19 so it is definitely not likely to be an Arch-specific screw-up on my part, if you see what I mean.
Last edited by cfr (2013-09-05 23:32:14)
Similar Messages
-
OT: Any comment about mediatemple dot com
I have some issues with my current web host provider for some
time. They used to be really good, but as it seems losing its
efficiency being reliable due to rapid growth and slow responses to
fix systemwide from time to time. Such slow responses to fix is not
acceptable in my humble opinion.
Before I am making a final decision, I am considering
mediatemple dot com. But I would like some comment, whether it is
excellent or negative ABOUT this particular web host provider:
mediatemple. Unless if there is solid, good reason for you or
someome to recommend me to consider other web host provider, say it
so. I am looking for some web provider that have quite powerful,
industrial-strength and very fast web servers with strong backings
of excellent tech support team (24 hours real live tech support,
the better).
TIA, DWD.I make the final decision to go with mediatemple.com in
effective first day of November and move on. TIA and cheers,
DWD -
I need an information about VoiceOver/Siri in hebrew...
Would be possible to a blind israeli use the Iphone? How?
I ask you because the VoiceOver is not translated to hebrew...If what you are asking is whether additional languages can be added to iPhone Voiceover, the answer is "no".
You can ask Apple to add Hebrew via
http://www.apple.com/feedback/iphone.html -
Please contact me at pra1949 (at) me (dot) com for any further contact I don not monitor the suelefriends (at) gmail (dot) com email.
I have had several iisues with my Apple ID accounts and spent many hours at the APPLE store in Richmond Va. getting them fixed. The technician was wonderful, patient and very knowlegeable, however he was not able to complete the task and said I needed to contact Apple support for the final step. During the process of fixing things I ended up with two APPLE ID accounts. my main accout is suelefriends (at) gmail (dot) com and the second account is "pra1949 (at) me (dot) com" I have most of my apps tied to the main account with only a few to the pra1949 account. I also have $25 worth of credit on the pra1949 account. Because of the two accounts it still makes updating apps very confusing and very cumbersome. I would like to have the two accounts merged so I end up with one account with all the money and APPS tied to it, that way I only need one password to update. I hope this is possible.
Paul Augsburger
<E-mails Edited by Host>These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another. -
HT1349 please i need an email to contact the apple store because I need information about iphone
Please i need an email to contact the apple because i need some information about iphone. Can you send to me an email? flavinha_bs<at>yahoo<dot>com<dot>br
<Email Edited By Host>We are just users like you, not Apple. Go to http://www.apple.com/retail to get contact information for Apple stores.
-
I'm running OS X 10.4.11 on my PowerMac, and cannot retrieve email. Does this have to do with iCloud? I also cannot upgrade my operating system as my computer won't accept it. Any information about this for me? Thank you!
Hi Steve,
If this is dot mac or Mobile me you can still use IMAP eMail in the iCloud.
Do not delete the old account yet. sign up for an iCloud account if you haven't.
MAKE A NEW ACCOUNT - DO NOT TRY TO ALTER YOUR EXISTING ACCOUNT.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
<B>DESCRIPTIONS</B>:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
<B>INSTRUCTIONS</B>:
1. Run the VI.
2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
<B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
<B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva -
How do I use my serial number to find information about my MacBook Pro's Processor and RAM?
So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?
Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541) -
Information about SAP Strategy Management (SAP SM)
Hello,
I want to know where I can find information about SAP Strategy Management (SAP SM). This is an application that was bought from PILOT.
Is it easy to customize like the SEM-CPM-BSC????
Is it an addon in the BW or ECC????
Is it all browser type application???
Thank you in advance...
Pablo Mortera.Greetings Pablo,
Thanks for your interest in SAP Strategy Management (SSM). More information can be found on the BPX site for Corporate Performance Management.
https://www.sdn.sap.com/irj/sdn/bpx-cpm
On that page is a short demonstration of SSM. There are two other sections on that page -"Key Topics" and "Best Practices" have links for more information about Strategy Management.
On the SAP.com global site, there is also information about Strategy Management, including white papers.
http://www.sap.com/solutions/performancemanagement/strategy/index.epx
Please review all this information and let me know if you have additional questions about SAP Strategy Management.
Regards,
Bob -
How can I see the information about a file used in a sequence?
How can I see the information about a file used in a sequence?
You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/ -
I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy
According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped. -
HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL
HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackriahi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
sys_context('userenv','os_user'),
sys_context('userenv','host'),
sys_context('userenv','ip_address'),
sys_context('userenv','instance'),
sys_context('userenv','sessionid'),
sys_context('userenv','terminal')
from dual;
Is this what you 're looking for? -
Do you have any more information about the Lightroom Mobile for tablet? [was:Information]
Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet? Like when it is coming out, what features will it have? Because I can't Waite. Especially for editing a raw file on a tablet. Excited.
I do have a Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files on the app like how photo shop touch does. Example. When your import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer?
3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
4. Will the app display catalog, book, etc modes like Lightroom 5 has?At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
Adobe will reveal more when they're good and ready. -
hi,
I have windows 8.1 and windows 7 both installed on my laptop.
when I open windows 7 and go to start menu I see both version of IE 32 bit and 64 bit.
but when I go to windows 8.1 core edition 64 bit ,I don't see IE 64 bit or normal (32bit). I see only IE and when I go to about IE I don't see there any information about IE if it is 64 bit or 32 bit?
I find it strange because I don't know with which version of IE I am working 32 or 64 bit? I know my IE is 11 but I don't know if it is 32 or 64 bit?
h.davidIt's complicated :)
MS changed a lot of things with the release of Win8.
By default, 64bit versions of Win8.0/8.1, will never run 32bit IE.
More here:
http://blogs.msdn.com/b/ieinternals/archive/2012/03/23/understanding-ie10-enhanced-protected-mode-network-security-addons-cookies-metro-desktop.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Error when displaying information about logon to windows 7
Hi everyone,
Would appreciate your kind assistance in this issue.
Currently, I've tried to set the "display information about previous logons during user logon" however user is unable to log in after gpupdate.
Error message is as follows :
Security policies on this computer are set to display information about the
last interactive logon. Windows could not retrieve this information. Please
contact your network administrator for assistance
Thank you everyone!http://www.grouppolicy.biz/2010/07/group-policy-setting-of-the-week-35display-information-about-previous-logons-during-user-logon/
http://blogs.technet.com/b/askds/archive/2010/07/17/friday-mail-sack-saturday-edition.aspx#lastlogon
NB:
For domain user accounts in Windows Server 2003, Windows 2000 native, or Windows 2000 mixed functional level domains, if you enable this setting a warning message will appear that Windows could not retrieve the information and
the user will not be able to log on. Therefore you should not enable this policy setting if the domain is not at the Windows Server 2008 domain functional level
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
I dont' want to have to keep manually moving each download off of the desktop. The downloads folder is selected as the location where i would like downloads to go. They are downloaded there but an additional copy keeps showing up on my desktop. Help!
-
Can't post to Craigslist using iPhone?
Seems you cant post to Craigslist using iPhone. All go's well until your asked to enter the "Verification Word" which is not an option with the iPhone. Does this have something to do with the lack of Jave or something. It's no big deal I'm just curio
-
During Importing Project Error in ODI 11.1.1.3
HI I am importing Projects in ODI 11.1.1.3 and i m having bellow Error. Repository ID is different. com.sunopsis.dwg.SQLWorkReposException: ORA-00001: unique constraint (DEV_ODI_REPO.AK_SNP_GRP_STATE) violated at oracle.jdbc.driver.SQLStateMappi
-
Q: When we are moving from one OAF page to another OAF page how can we retain first page session or first page status. thnakx in adv
-
OPlayer HD ($4.99 version) will play a sample of a video, which is 916 KB, but not the full video, 450.4 MB. When I click on the Name the "play" screen comes up and immediately goes away again. I've set the cache size (in Network Settings) to the m