Information about Generic MDB with Ejb2.1

The version ejb2.1 suggests WE can create MDB without JMS.
Can any one suggests me some documents and some sample programs related TO Generic MDB with ejb2.1

The version ejb2.1 suggests WE can create MDB without
JMS.
Can any one suggests me some documents and some
sample programs related TO Generic MDB with ejb2.1They're not "generic", because in all cases they have to replace the MessageListener interface with some other particular type.
For example, for a JAXM -MDB,you must implement OneWayListener or ReqRespListener.
Here's one example where MDB is used as an email listener.

Similar Messages

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need Information about Generic Data sources

Hi Experts,
I need some information about Generic Data Sources in SD & MM applications.
Can you please tell me on which Tables u have created Generic Data sources ?
Just explain 2 scenarios.
This is very helpful for my Interviews.
Thanking you.

HI,
TBD10 --- Def., out of which IDOC fields a filter object is to be read
BD59 maintains that table
Rhea.
Edited by: rhea on Nov 4, 2008 2:09 PM

Want to complete information about Generic WHT report-S_P00_07000134

Hi Experts,
I want to know complete information about Generic WHT report-S_P00_07000134
My following questions
1) Once executed report,why it is asking addition selection like address and more informaiton and where it will help.
2)Why is asking for variant,if click on yes,what will happen
3) Selected "always allow in the context"option and seen the file in c:\drive.Butnot able to understand the format.What is this and for change allow option in future,what can i do?
Please help.
Regards,
Kishore.J

Hi,
Check whether you have maintained Tax ID in T.Code J1ID Vendor Excise details.
Regards,

Do not remove information about the community with out replacing said information.

Policy changes ok. What things are about, or the meaning of items, should stay here until something is new to replace these pieces of information.
Solved!
Go to Solution.

Heather_VZ wrote:
Hey Prisaz-
Can you please elaborate? Which pieces of information are you talking about? We don't delete information and very rarely do we archive things- and even then, they are all searchable. If you can give me more specifics, I'll be happy to do some research to see what's up.
Thanks,
Heather
My bad. I guess with newer information, the older Jamie_Lee stuff regarding user levels, has just been bumped towards the bottom, and is still there, as pointed out by SomeGirl. I just over looked most of it.
I just posted this because of other items being discussed. Please disregard, as it was an error on my part. The information is still there, but with the last site upgrade it is not exactly in the same place. (sort of)

Need information about FI document with header and no items

Hello Experts!
I need your help for understanding the following subject :
How is it possible when using F.13 to obtain a fi document with header without items sometimes,
and fi document with header and items anothers times?
We didn't saw/found customizing topics about that ( to enable or not header without items) Some exists?
The only difference in the two cases are the document's type involded which are not the same.
Regards,
Josiane

Hi,
We verify and compare everything. it's the same everywhere except the document type of the invoice
first case, F.13 create conciliation fi document with header and no items
invoice ( doc. type YB )
payment ( doc type ZT)
conciliation ( doc type XZ )
2th case, F.13 create conciliation fi document with header and none items
invoice ( doc. type YT )
payment ( doc type ZT )
conciliation ( doc type XZ )
We match / compare every fields and value between invoice of 1st and 2tch case, every fields and value between payment of 1st and 2th case.
( we create tests case in own integration system for reproduce )
We alse match / compare customizing of invoice type document YB and YT and they seems identical...
The procedure is the same with F.13 to do conciliation in both cases.
we got same amount, same currency etc etc.
We still didn't understand why with invoice type YT the conciliation document created is not the same as invoice type YB ...
Nobody have idea ?

Need informations about dependency scenario with job chains

Hi,
I created several job chains containing one ora mor scripts.
Now I want to create dependencies between this job chains. For example : job chain 2 must begin when job chain 1 is finished, job chain 3 must begin when job chain 2 is finished etc...
So my first question : how can I do that ? (create dependencies between job chains)
Second point : all this job chains have not the same time periods : example : job chain 1 must execute every day, job chain 2 every monday, job chain 3 every day...... so if i take the example of tuesday : job chain 1 must execute and when it is finished then job chain 3 must execute. On Monday : job chain1, then job chain 2 and for finish job chain 3. How can I do that ?
Edited by: kennel yves on Aug 19, 2009 12:27 PM

Hi Yves,
If your chains are not dependent on each other, you should submit them as separate jobs.
So if you have a chain that runs every workday at 18:00, and another chain that runs on Tuesday and Friday at 14:00, and there are no dependencies between the chains, then you should:
- submit the first chain at 18:00, time window "Workdays", submit frame "EveryDay"
- submit the second chain at 14:00, time window "TuesdaysAndFridays", submit frame "EveryDay" (it will skip the days that the time window is closed anyway)
Same for the other independent chains with different schedules. If there are no dependencies, there is no need to combine chains together.
The first reply was for the scenario where you have chain A and B, A starts at some time and B starts after A. Additionally, B only runs on Tuesdays, while A runs every workday. In that case there are dependencies between the two chains, and then a parent chain is very convenient:
- chain "RunAandB", with two steps
- step 1: call chain A
- step 2: call chain B, with a precondition so that B only runs on Tuesdays.
Regards,
Anton Goselink.

Cannot see size information about patch sizes with GUI

I no longer see the sizes for the individual patches when I invoke the GUI updatemanager. The patching still works. I have been patching today on various hosts and noticed it. I don't think that I have changed preferences/settings.

There is an issue with the latest current.zip and these fields. We are working with the patch team (POD) to resolve. Will update forum when it's been resolved.

Need information about notification with SAP Netweaver Identity Management

Dear Experts,
I need some informations about send e-mail from SAP NIM. We want to send an e-mail after creation of sap users etc.
Please note that today we have a Domino/Lotus server.
I undertsood that we can send e-mail through the Identy Center (IC) component. But I did not find how to set up this solution? I did not find architecture informations?
Could you please provide me the different configuration steps?
Should I install another component? Or I just have to configure my SMTP Server?
Also, have you got the best practices for this step?
Thanks a lot for your help
Regards
Hocine NAÏ

Hello,
For notification, first you need to create a repository of generic type and provide the lotus notus host details in the repository constant.
Eg:
EMAIL_SERVER abc.def.com
EMAIL_ORIGINATOR orignator mail ID
Then create a task with the "To Generic" type Pass.
Select the name of the function below in the Next data entry of the Destination tab of the pass.
and provide the attribute and value as below:
MSKEYVALUE %MSKEYVALUE%
EMAIL_RECIPIENT recipients mail ID
EMAIL_SUBJECT Hello %DISPLAYANEM%
LOCATION %LOCATION%
Eg of a Function to sent mail is shown below:
function SendEmail(Par){
 Recipient = Par.get("EMAIL_RECIPIENT");
 Subject = Par.get("EMAIL_SUBJECT")
 Location = Par.get("LOCATION");
 Body = "This is a report from SAP NetWeaver Identity Center at %$ddm.date% %$ddm.time% ";
 Body = Body + "Your location is " + Location + " ";
 Body = Body + " ";
 Body = Body + "Best regards ";
 Body = Body + "MaXware AS ";
 UserFunc.uSendSMTPMessage("%$glb.EMAIL_ORIGINATOR%", Recipient,Subject,Body,"%$glb.EMAIL_SERVER%",1);

A PDF document with information about activation for CS6 software

Here's a PDF document with information about activation for CS6 software.
I found it very useful for understanding how the system worked for activation of perpetual licenses, both in cases where the computer is and isn't connected to the Internet.

Ann, with some browsers, the PDF document will download in the background rather than appear in a browser window.

A question about a method with generic bounded type parameter

Hello everybody,
Sorry, if I ask a question which seems basic, but
I'm new to generic types. My problem is about a method
with a bounded type parameter. Consider the following
situation:
abstract class A{ }
class B extends A{ }
abstract class C
 public abstract <T extends A> T someMethod();
public class Test extends C
 public <T extends A> T someMethod()
 return new B();
}What I want to do inside the method someMethod in the class Test, is to
return an instance of the class B.
Normally, I'm supposed to be able to do that, because an instance of
B is also an instance of A (because B extends A).
However I cannot compile this program, and here is the error message:
Test.java:16: incompatible types
found : B
required: T
 return new B();
 ^
1 errorany idea?
many thanks,

Hello again,
First of all, thank you very much for all the answers. After I posted the comment, I worked on the program
and I understood that in fact, as spoon_ says the only returned value can be null.
I'm agree that I asked you a very strange (and a bit stupid) question. Actually, during recent months,
I have been working with cryptography API Core in Java. I understood that there are classes and
interfaces for defining keys and key factories specification, such as KeySpec (interface) and
KeyFactorySpi (abstract class). I wanted to have some experience with these classes in order to
understand them better. So I created a class implementing the interface KeySpec, following by a
corresponding Key subclass (with some XOR algorithm that I defined myself) and everything was
compiled (JDK 1.6) and worked perfectly. Except that, when I wanted to implement a factory spi
for my classes, I saw for the first time this strange method header:
protected abstract <T extends KeySpec> T engineGetKeySpec
(Key key, Class<T> keySpec) throws InvalidKeySpecExceptionThat's why yesterday, I gave you a similar example with the classes A, B, ...
in order to not to open a complicated security discussion but just to explain the ambiguous
part for me, that is, the use of T generic parameter.
The abstract class KeyFactorySpi was defined by Sun Microsystem, in order to give to security
providers, the possibility to implement cryptography services and algorithms according to a given
RFC (or whatever technical document). The methods in this class are invoked inside the
KeyFactory class (If you have installed the JDK sources provided by Sun, You can
verify this, by looking the source code of the KeyFactory class.) So here the T parameter is a
key specification, that is, a class that implements the interface KeySpec and this class is often
defined by the provider and not Sun.
stefan.schulz wrote:
>
If you define the method to return some bound T that extends A, you cannot
return a B, because T would be declared externally at invocation time.
The definition of T as is does not make sense at all.>
He is absolutely right about that, but the problem is, as I said, here we are
talking about the implementation and not the invocation. The implementation is done
by the provider whereas the invocation is done by Sun in the class KeyFactory.
So there are completely separated.
Therefore I wonder, how a provider can finally impelment this method??
Besides, dannyyates wrote
>
Find whoever wrote the signature and shoot them. Then rewrite their code.
Actually, before you shoot them, ask them what they were trying to achieve that
is different from my first suggestion!
>
As I said, I didn't choose this method header and I'm completely agree
with your suggestion, the following method header will do the job very well
protected abstract KeySpec engineGetKeySpec (Key key, KeySpec key_spec)
throws InvalidKeySpecException and personally I don't see any interest in using a generic bounded parameter T
in this method header definition.
Once agin, thanks a lot for the answers.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Report with information about release documents in VKM1

Hello
I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
The transaction VKM2 just gives the release date of the document and not the user.
Where I can find more information?
Regards
Daniel Teles

Hi,
There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
regards

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

Information about Generic MDB with Ejb2.1

Similar Messages

Maybe you are looking for