Information about link WebTemplate - iView

At my current customer a Portal is implemented. Within the Portal Content they linked WebTemplates to iViews. This has not been documented anywhere. I'm now looking for a simple way to get an overview of all the WebTemplates used within the Portal (and preferable within which iView) without having to open all iViews. I was hoping this kind of information was stored somewhere in a table in the SAP backend, but have not succeeded in gathering this information.
Can anybody help me please?
Thanks in advance for your replies.

check this documentation; check directory configuration settings and particularly its various chapters on Directory Server Admin, Dir Entries Admin, Dir Schema Admin, etc.
Oracle® Internet Directory Administrator's Guide,
OID

Similar Messages

Information about linked server details including remote login in use

After joining a new organization, one day an application support came to ask brief information about all the SQL Server linked servers and few more important configuration details.
They were looking to upgrade their application and database. In order to know all possible sources of their data feed, the guy needed this information.
Most of the information could have been taken by running
sp_linkedservers but because login information was also required I preferred to run following query to collect the required data.
SELECT
srv.name as LinkedServerName
,srv.product
,srv.provider
,srv.data_source
,srv.catalog
,sp.name
,lgn.uses_self_credential
,lgn.remote_name remote_login_in_use
FROM
sys.servers
AS srv JOIN
sys.linked_logins
AS lgn
ON
srv.server_id = lgn.server_id
AND srv.is_data_access_enabled
= 1
LEFT
JOIN sys.server_principals
AS sp ON lgn.local_principal_id
= sp.principal_id
WHAT IS actual data source Server Name
Although they got the information, but they could not recognize the actual server names as highlighted in the
srv_data_source column. All they said that, the linked servers were created by DBAs.
I tried to ping these names from my user desktop, but could not Ping request could not find host.
Tried to check the SQL Server Aliases but there were no alias defined for any of the server names.
Finally I looked into the host file and found the entries. The ping from my desktop did not work because the host file entries are local to the database server. Because SQL Server instance is sitting on the same server where the
names are entered into the host file, it was able to resolve the host names. Also Ping from the database server worked. The host file looked like as below (C:\Windows\System32\drivers\etc)
Hope this information helps you!!.
Warm Regards, Ajay

Hi Ajay,
Thanks for sharing your idea.
Maggie Luo
TechNet Community Support

I want to get information about links

Hi
I need full detail and information about my links which is placed in indeisgn .
Can anyone help me?...

Hi,
this is what to can get from a link and its metadata ...

EtreCheck version: 2.1.5 (108) Report generated 4 January 2015 14:29:26 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adware

My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help. I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
 2% WindowServer
 1% mds
 0% fontd
 0% mds_stores
 0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.

patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Need information about DB link

I need some information about DB links (TCODE - DBCO).
What is the purpose of DB link?
How do We Transport a DB link when we need to refresh a system/server?

To provide access to external, non-SAP databases, SAP has developed the DB Link
tool, which allows access to data stored in an external database through the BW Service
API. The basic idea behind the DB Link tool is to connect to a remote database, to make
the required remote table or view visible to the SAP ABAPWorkbench dictionary, and
to define a generic extractor for the remote table or view. The DB Link tool is supported
for Oracle, Microsoft SQL Server, and IBM DB/2 databases.
Refer:
[http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm]
[Query;
Edited by: N Narayanan on Sep 17, 2008 1:52 PM
Edited by: N Narayanan on Sep 17, 2008 2:00 PM

I need some information about scripts

hi,
i need detailed information about scripts.tell me where it will available.
bye
sreenu.

Hi,
Posting in the ep forum,I believe you require Information on javascripts and client side eventing(EPCF).
Here is the link that you need with regard to this:
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/3e98408d953154e10000000a1550b0/frameset.htm
(Or go to SAP NetWeaver Developers Guide->
IT Scenario-Driven Enhancements to Applications->Running an Enterprise Portal->Core Development Tasks->Creating and Managing Content->Client-side Eventing)
The below document can also be useful.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/enterprise portal client.pdf
If you need an illustration of how epcf can be used , you can refer to this blog
/people/arulraja.ma/blog/2004/12/18/how-to-include-loading-message-in-a-portal-iview-ep6-sp2
Regards,
Harish
(Please award points for helpful answers)

Information about portals

hi sap experts,
i am working as a bw support consultant ,My company is using portals for reporting.
So i want to know how to learn the portals,is it like WEB REPORTING or something else(i never used web reporting ).
Can any body give information on these portals(i can access reports through internet).
Also any one would like share some documentation regarding portals.
thanks in advance.

Display of BI Content in the Portal
you can access reports through internet once you publish the templates or reports in the portal..check the link below how to publish in portal
BEx Web application as an iView
A BEx Web Application as an iView shows the current data for the BI report. From a technical viewpoint, a direct call of the BEx Web Application occurs in the BI system. You can combine the BEx Web Application as part of a portal page with other iViews from other systems as an iView.
You can change the properties of the iView so that BI bookmarks or BEx queries can be displayed. For more information, see
http://help.sap.com/saphelp_erp2005vp/helpdata/en/88/3c1640d4642402e10000000a1550b0/frameset.htm
For more information about the various options for generating iViews, see
http://help.sap.com/saphelp_erp2005vp/helpdata/en/88/3c1640d4642402e10000000a1550b0/frameset.htm.
Reward points if you find this useful
regards
GulshanRaj
Message was edited by:
GulshanRaj Shetty

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Information about SAP Strategy Management (SAP SM)

Hello,
I want to know where I can find information about SAP Strategy Management (SAP SM). This is an application that was bought from PILOT.
Is it easy to customize like the SEM-CPM-BSC????
Is it an addon in the BW or ECC????
Is it all browser type application???
Thank you in advance...
Pablo Mortera.

Greetings Pablo,
Thanks for your interest in SAP Strategy Management (SSM). More information can be found on the BPX site for Corporate Performance Management.
https://www.sdn.sap.com/irj/sdn/bpx-cpm
On that page is a short demonstration of SSM. There are two other sections on that page -"Key Topics" and "Best Practices" have links for more information about Strategy Management.
On the SAP.com global site, there is also information about Strategy Management, including white papers.
http://www.sap.com/solutions/performancemanagement/strategy/index.epx
Please review all this information and let me know if you have additional questions about SAP Strategy Management.
Regards,
Bob

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

How to get information about cursor? I had only a reference on it.

Hello
How to get information about cursor, that I receive in my procedure as a reference. For example I need to know, a number of columns. I know nothing about this cursor, except the link on it.
Best Regards, Kostya Proskudin!

However, I would seriously reconsider what you are trying to achieve.
It looks like you are trying to write some ultimately generic cursor processor. i.e. pass any cursor and process it in some generic way.
Good design should include knowledge of what is expected to be passed and that knowledge can be put into the code.
Generic code is inherently difficult to maintain and debug and will never 100% deal with all possible situations e.g. even if you know the table being queried in the cursor you can't rely on the data dictionary to give you all the returned columns if some of the returned columns of the cursor are computed columns.
Be careful you aren't writing something that's going to cause problems later.

Viewing in Answers descriptive information about a level

Hi, I have a Customer dimension level in BI Admin with its logical level key CUST_NAME.
I also have some further information about each customer, like address and phone number (stored in CUSTOMER Logical Table), how could I link them to the Customer and view these data in Answers?
It's like a kind of descriptive level attribute I'd want to view in Answers associated to the level logical key...
any suggestion would be appreciated very much!

As in the 1st post, I'd want to associate address and phone number to my CUSTOMER level, in which I drill down using CUST_NAME as a logical level key.
The only way to view these information is include their columns in my Answers query, I ask the forum if is there another way to, for example, click on the customer column just drilled-down and view customer address...
In another way: which is the utility of having a level key if it isn't logical level key?
for example in my CUSTOMER level now I have 2 level key: CUST_NAME, which is logical level key and drill-down enabled, and CUST_ADDRESS which is not logical level key (it has the blue icon). Which is the utility (if is there) of having in my level CUST_ADDRESS that is not a logical key?
Edited by: battle84 on 1-dic-2009 9.29

How to get information about limitation Internal Memory on device

hallo ..
have some question here, so please some person able to answer my questions
1. How to get Information about limitation internal memory on device
2. is possible to improve internal memory on Blackberry ( move apps on external memory )
3. any tools to get internal memory activity ?
thanks for this people who joins here, hope we can share more information about blackberry ..

In addition...
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
KB05461MicroSD card sizes supported by the BlackBerry device software
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
KB14320How to maximize free space and battery power on the BlackBerry smartphone
KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Way to consolidate information about vendors

Hello,
I have two or more vendor master data , that have different vendor no (LIFNR) but they relate to same vendor.
Example: Vendor A Vendor B , different ID but relate to the same vendor.
It is happened usually in cases that the VAT.Reg no. is changed and than I need to open another record in the vendor master data for the same vendor.
I need to find way when using control reports (LIS, BW, ME2L,ME2M..) to vendor B (LIFNR) the system will show also information about vendor A.
I need, standard way to consolidate information for two different vendor master data that relate to the same vendor.
Best Regards
Hadidit

you create new vendor and continue your business with the new vendor, but want the old vendor as well in the reports.
I dont think that there is anything available in standard SAP that you can automatically get both vendors into a e.g. ME2L report when you enter one vendor number in the selection.
I cannot imagine thatyou can run MR2M reports based on partner functions .
in vendor master control view is field called Group key that can be used to link old and new vendor number
f1 help says:
If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are possible.
But I have not seen this field in selection of ME2L.

Information about link WebTemplate - iView

Similar Messages

Maybe you are looking for