Information about server tools Xi 3.1 SP3

Searching for a detailed overview about the server tools/products which can be installed with BO Xi ENT 3.1 SP3. My last experencie with BO was at version 6.5. Now looking at Xi it is totally different Want to do a custom intall but the list with server products is really large and out of my scope. When clicking on a product it gives a brief description but I'm searching for a good document where these are explained.
My primary's are crystal reports server to run queries from a third party application.Client tool to run reports on a universe basis from Xi sort of Webi/Deski. And a scheduler to schedule these jobs. With AND without possibility to make publications like in publisher.
Any tips?

Crystal report Server is a Server tailored to run Crystal reports, it does not provide ability to create Crystal reports, only run them.
BOE Xi3.1 can run Crystal reports as well ad Deski and Webi, and include all the tools to create Deski and webi reports, however, to create Crystal reports you need a Crystal Reports (designer) product. Which is separate from both BOE Xi3.1 and CRS 2008
Admin guide has explanation of all the server components you see in custom install selections.
Crystal reports Cache server
Crystal reports Processing server
Crystal reports Job server
Are all part of Crystal report procesing, Cache and Processing servers used to run reports on demand, Job server is used to process report schedules.

Similar Messages

Information About Ant Tool

What is the main purpose of ANT Tool? Can any body tell me?
Thanks in advance
Srinivasa Rao Somu
Software Engineer
Netsoft Global Informatics Pvt ltd.
[email protected]

Ant is a tool for automating the process of building Java applications. It can do just about anything you need to do: compile, package, move files around, even create javadoc. The documentation is actually pretty good:
http://ant.apache.org/manual/index.html
http://ant.apache.org/
At my company we use it to build our applications from source then take the classes, wrap them up with configs (and other stuff) and deploy the archive file to a location for each instance.
The config can be a little intimidating at first. I'd suggest getting a few example build files to get started.
~ Robert

Request the information about Sun Web server

Hi,
We are developing an embedded system. We need install a web server in our system. We got some information about Sun web server, but it is not enough for us to decide which web server we should use. Would you please give me some detail information of Sun web server?
1.Firstly, we will use the web server in an embedded system. Can Sun web server run in the embedded system, such as VxWroks, Embed Linux?
2.Secondly, we will use chroot jail to enhance the security. Can Sun web server support chroot jail?
3.We can pay money for the service. But would you provide the service to customize the web server according to our necessary and maintain the web server? What's the price?
4.Can you give me a detail features list of Sun web server? Or please check the following feature list. Thank you very much.
Feature List:(For native support feature, input (Y)es; Support via third-party product, input (3)rd; Not support, input (N)o).
Part I. Core Technology
()HTTP/1.1 　
()KeepAlives　
()Pipelining　
()Templated web site
()reconfiguration without restart
()On-demand web site deployment
()High scalability process model
()Linear SMP scalability
()Configurable log format
()Customisable error pages
()Dynamic log rotation
()Bandwidth throttling
()Basic Server-Parsed HTML (SSI)
()Dynamically-generated SSI
()Automated self-diagnostics
()Multiple logs　
()Virtual servers
()embedded in other applications
()extensible
()modularity
()J2EE 1.4 support
()IPv6 support　
Part II. Security
()SSL v2 and v3
()SSL(hardware)
()SSL certificate management
()Clustered SSL certificate deployment
()Antivirus
()ActiveDirectory authentication
()Antispam
()Built-in firewall
()LDAP authentication
()Anti-Denial-of-Service protection
()HTTP request filtering
()Malformed HTTP header protection
()Integrated attack monitoring and logging
()Hardware crypto support
()IP address authentication
()DNS name authentication
()User-based authentication
()Referrer-based authentication
()Basic Authentication
()Other/system authentication
　
Part III. Management
()GUI Setup
()GUI configurate
()Web-based user interface
()remote management
()WebDAV support
()Clustered web site management
()Group-based web site configuration
()Integrated licence management
()Configuration wizards
()Scriptable (command-line) configuration tools
()Real-time web-based statistics
()SNMP monitoring
()Delegated user management (htaccess)
()Scalable subserver support
　
Part IV. Application Support
()NSAPI
()ISAPI filters
()ISAPI extensions
()FastCGI
()CGI
()Generic FastCGI/CGI handler
()Secure CGI sandboxing
()Limit CGIs by CPU or memory use
()LDAP
()XML support
()SOAP
()Request rewriting
()Own API
()Own scripting/batch language
()WAR file support
()Content filters
()HTTP (Gzip) Compression
()Perl
()Servlet
()JSP
()ASP/ESP
()Secure setuid PHP
()PHP
Part V. Support
()commercial support
()MailList
()Forum
()Free telephone
()24x7 support
()GSA scheduled
()FAQ
()Tutorial
()Document
()Source code
Thank you very much!

Web Server is not currently supported under VxWorks or Embedded Linux. There's information on the supported platforms on the Web Server page at http://www.sun.com/webserver

Information about linked server details including remote login in use

After joining a new organization, one day an application support came to ask brief information about all the SQL Server linked servers and few more important configuration details.
They were looking to upgrade their application and database. In order to know all possible sources of their data feed, the guy needed this information.
Most of the information could have been taken by running
sp_linkedservers but because login information was also required I preferred to run following query to collect the required data.
SELECT
srv.name as LinkedServerName
,srv.product
,srv.provider
,srv.data_source
,srv.catalog
,sp.name
,lgn.uses_self_credential
,lgn.remote_name remote_login_in_use
FROM
sys.servers
AS srv JOIN
sys.linked_logins
AS lgn
ON
srv.server_id = lgn.server_id
AND srv.is_data_access_enabled
= 1
LEFT
JOIN sys.server_principals
AS sp ON lgn.local_principal_id
= sp.principal_id
WHAT IS actual data source Server Name
Although they got the information, but they could not recognize the actual server names as highlighted in the
srv_data_source column. All they said that, the linked servers were created by DBAs.
I tried to ping these names from my user desktop, but could not Ping request could not find host.
Tried to check the SQL Server Aliases but there were no alias defined for any of the server names.
Finally I looked into the host file and found the entries. The ping from my desktop did not work because the host file entries are local to the database server. Because SQL Server instance is sitting on the same server where the
names are entered into the host file, it was able to resolve the host names. Also Ping from the database server worked. The host file looked like as below (C:\Windows\System32\drivers\etc)
Hope this information helps you!!.
Warm Regards, Ajay

Hi Ajay,
Thanks for sharing your idea.
Maggie Luo
TechNet Community Support

Get information about Weblogic Application Server knowing only port number.

Hi.
What kind of information about Weblogic Application Server can I get if I know only port which web application is deployed?
If it is true, how can I get it?

1, If you want a opportunity run your code at server instance started or restarted, please see:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/config_xml/StartupClass.html
2, or you can package your code in a standard web application， deploy into the server instance.
a servlet required to start you service.

Need Information about IMS QTI 1.01 Assessment Generator Tool

Hi All,
Does anyone know about any tool to generate IMS QTI 1.01 Assessments from an excel sheet. I have only come across those tools that generate assessments in a later/newer version of IMS QTI standard which is non compliant of OLM. Any information will be highly appreciated in this regard.
Thanks & Regards,
Bilal Khan
Senior Consultant
Global Business Services
IBM

Hello Hussein,
Yes I have checked these docs, they only discuss what kinds of content standards are compliant with OLM. I am actually looking for a tool/software/product that generate IMS QTI 1.01 compliant assessments from a excel sheet.
I have found many assessment generator tools but they all generate assessments in later/newer versions of IMS QTI standard.
Regards,
Bilal Khan

Need information about WebLogic Server API

Hi All,
Can anyone please tell me what API does Oracle Weblogic Server call. I want to ask by calling which API I can get information about the state of a weblogic server and which jar contains those APIs.
Thanks in Advance!!

Hi Roshni,
For List of MBean's You can follow the below Oracle link
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13951/core/index.html
can you pls tell me how can I retrieve of a weblogic server through a java code,
You can follow the below link,it will be helpful
http://middlewaremagic.com/weblogic/?p=7505
Regards
Fabian

Where can I find information about using the measurement tool and log?

Am try to use the measurement tool to measure perspective plain; any ideas?

No one can remotely have "any ideas" to help you when you don't even mention what your problem is nor what your system and workflow are like.
Of course, when you post here,one assumes you have done your due diligence, read the documentation, the user guide, the Help files in the Photoshop Help menu, as well as done Google and forum searches, etc, and we would expect some sensible, detailed information from you.
Teaching someone Photoshop from scratch, step by step, exceeds the scope of this forum—or any other forum.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to find the Information about DB-Server in OEM?

Hi all,
I would like to know, how to find the information about the Server-Machine on that the Database installed (Server ID, Network ID, IP-Address, ...) in Oracle Enterprise Manager.
Regards
Leonid Pavlov

HI Dan,
I dnt know what is SEM ? I Know that SEM uses BI data. if im wrong pls correct me, and my question is, is there any function modules like SD, MM like wise in R/3 is there any modules same in SEM . If they are where the information is stored that these modules are implemented.. at database level..
Thanks,
Mahesh

Need Information about tools

Hi,
Can anybody please give me some idea and brief information about the following
E-Star
B2B webshop
ISHOP
BASEWARE
B2B Webshop
CPRF Portal
E2E
HPDD
I appreciate all your help
Thanks in advance

I thought it could be under SAP security ..If its not,Could you please tell me the relevant topic link.

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

The acount information could not be verified - SQL 2005 SP3 installation on Windows 2008 R2 Failover Cluster

Hi,
We have a problem when we are trying to install SQL SP3 on SQL 2005 cluster.
The problem is described bellow:
We installed a new Windows 2008 R2 x64 failover cluster with two nodes.
As a next step we installed SQL 2005 Enterprise edition x64 on this failover cluster. We have finished the installation without problems. After SQL installation we are trying to install SQL SP3 . We have logged on using a domain administrator account and
we start the installation of SP3 with that user. In authentication mode screen the test gives a success status using either domain administrator-windows authentication or sa-sql authentication. On remote user account screen, when we give the domain
administrator account we get the message "the account information could not be verified. Press ok to return to authentication mode screen to determine the reason for failure".
We have tried to give the SQL services startup user on remote user account screen but the error is the same.
the domain administrator account exists on security logins of SQL with sysadmin rights.
Can someone help?
Thanks.

Hi StelioMavro,
According to your error message, when you install SQL Server 2005 SP3 in your failover cluster, we need to verify if there was other instance that had been removed and the installation did not pass the login check. I recommend you use windows authentication
instead of SQL Server authentication when applying SP3. And the windows account used to run the SP3 setup program must have administrator privileges on the computer where SP3 will be installed.
For more information about how to install SQL Server 2005 SP3 in failover cluster, you can review the following article.
http://www.sqlcoffee.com/Tips0007.htm
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Need information about unicode

Hello friends,
I need informatiion about an unicode to change english language in to regional language.Please give me information about same.
Thanx,
Rahul Talele

Hi
Hope it will help you,.
Reward if help.
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.

Need information about DB link

I need some information about DB links (TCODE - DBCO).
What is the purpose of DB link?
How do We Transport a DB link when we need to refresh a system/server?

To provide access to external, non-SAP databases, SAP has developed the DB Link
tool, which allows access to data stored in an external database through the BW Service
API. The basic idea behind the DB Link tool is to connect to a remote database, to make
the required remote table or view visible to the SAP ABAPWorkbench dictionary, and
to define a generic extractor for the remote table or view. The DB Link tool is supported
for Oracle, Microsoft SQL Server, and IBM DB/2 databases.
Refer:
[http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm]
[Query;
Edited by: N Narayanan on Sep 17, 2008 1:52 PM
Edited by: N Narayanan on Sep 17, 2008 2:00 PM

Information about table calls

Hi to all,
I can to know the table calls, running transaction ST10, but I need to know, what programs and users are generating those calls.
Can someone give me any help about how I can get the information about those calls?
Regards
Eduardo Barrios

Hi Eduardo,
unfortunately, there is no direct tool available ...
But, you could start an ST05 trace for just one of these tables for ALL users on the appl-server and then track after a few minutes, hours and see ...
This trace only reduces performance a bit ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Information about server tools Xi 3.1 SP3

Similar Messages

Maybe you are looking for