Information about Sun Cluster 3.1 5Q4 and Storage Foundation 4.1

Hi,
I have 2 Sunfire V440 with Solaris 9 last release 9/05 with last cluster patchs.. , Qlogic HBA fibre card on a seven disks shared on a Emc Clariion cx500. I have installed and configured Sun cluster 3.1 and Veritas Storage Foundation 4.1 MP1. My problems is when i run format wcommand on each node, I see the disks in a different order and veritas SF (4.1) is also picking up the disks in a different order.
1. Storage Foundation 4.1 is compatible with Sun cluster 3.1 2005Q4?????
2. Do you have a how to or other procedure for Storage foundation 4.1 with Sun Cluster 3.1.
I'm very confuse with veritas Storage foundation
Thanks!
J-F Aubin

This combination does not work today, but it will be available later.
Since Sun and Veritas are two separate companies, it takes more
time than expected to synchronize releases. Products supported by
Sun for Sun Cluster installation undergo extensive testing, which also
takes time.
-- richard

Similar Messages

  • Using JMX to get status information about NetWeaver cluster

    Hi everybody,
    We are trying to use JMX to get some status information about NetWeaver cluster.
    For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
    The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
    Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
    What are the first two node Ids from the list?
    How can the last two node Ids be identified as java processes?
    How can we obtain status information about each java process (node id) ?
    Thanks for all ideas,
    Radu

    As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
    In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
    Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
    Machtelt.

  • Request the information about Sun Web server

    Hi,
    We are developing an embedded system. We need install a web server in our system. We got some information about Sun web server, but it is not enough for us to decide which web server we should use. Would you please give me some detail information of Sun web server?
    1.Firstly, we will use the web server in an embedded system. Can Sun web server run in the embedded system, such as VxWroks, Embed Linux?
    2.Secondly, we will use chroot jail to enhance the security. Can Sun web server support chroot jail?
    3.We can pay money for the service. But would you provide the service to customize the web server according to our necessary and maintain the web server? What's the price?
    4.Can you give me a detail features list of Sun web server? Or please check the following feature list. Thank you very much.
    Feature List:(For native support feature, input (Y)es; Support via third-party product, input (3)rd; Not support, input (N)o).
    Part I. Core Technology
    ()HTTP/1.1 　
    ()KeepAlives　
    ()Pipelining　
    ()Templated web site
    ()reconfiguration without restart
    ()On-demand web site deployment
    ()High scalability process model
    ()Linear SMP scalability
    ()Configurable log format
    ()Customisable error pages
    ()Dynamic log rotation
    ()Bandwidth throttling
    ()Basic Server-Parsed HTML (SSI)
    ()Dynamically-generated SSI
    ()Automated self-diagnostics
    ()Multiple logs　
    ()Virtual servers
    ()embedded in other applications
    ()extensible
    ()modularity
    ()J2EE 1.4 support
    ()IPv6 support　
    Part II. Security
    ()SSL v2 and v3
    ()SSL(hardware)
    ()SSL certificate management
    ()Clustered SSL certificate deployment
    ()Antivirus
    ()ActiveDirectory authentication
    ()Antispam
    ()Built-in firewall
    ()LDAP authentication
    ()Anti-Denial-of-Service protection
    ()HTTP request filtering
    ()Malformed HTTP header protection
    ()Integrated attack monitoring and logging
    ()Hardware crypto support
    ()IP address authentication
    ()DNS name authentication
    ()User-based authentication
    ()Referrer-based authentication
    ()Basic Authentication
    ()Other/system authentication
    　
    Part III. Management
    ()GUI Setup
    ()GUI configurate
    ()Web-based user interface
    ()remote management
    ()WebDAV support
    ()Clustered web site management
    ()Group-based web site configuration
    ()Integrated licence management
    ()Configuration wizards
    ()Scriptable (command-line) configuration tools
    ()Real-time web-based statistics
    ()SNMP monitoring
    ()Delegated user management (htaccess)
    ()Scalable subserver support
    　
    Part IV. Application Support
    ()NSAPI
    ()ISAPI filters
    ()ISAPI extensions
    ()FastCGI
    ()CGI
    ()Generic FastCGI/CGI handler
    ()Secure CGI sandboxing
    ()Limit CGIs by CPU or memory use
    ()LDAP
    ()XML support
    ()SOAP
    ()Request rewriting
    ()Own API
    ()Own scripting/batch language
    ()WAR file support
    ()Content filters
    ()HTTP (Gzip) Compression
    ()Perl
    ()Servlet
    ()JSP
    ()ASP/ESP
    ()Secure setuid PHP
    ()PHP
    Part V. Support
    ()commercial support
    ()MailList
    ()Forum
    ()Free telephone
    ()24x7 support
    ()GSA scheduled
    ()FAQ
    ()Tutorial
    ()Document
    ()Source code
    Thank you very much!

    Web Server is not currently supported under VxWorks or Embedded Linux. There's information on the supported platforms on the Web Server page at http://www.sun.com/webserver

  • How do I use my serial number to find information about my MacBook Pro's Processor and RAM?

    So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?

    Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    This won't reveal how much RAM it currently has installed.
    (117541)

  • The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?

    The last Apple I used was a IIe. Where can I find basic information about what an Ipad will do and how it differs from an Android tablet?
    I am considering purchasing this for my wife who has only had experience with Windows machines.

    Here are a number of possibilities:
    http://ipad.about.com/od/iPad_Guide/a/How-To-Use-The-iPad-Best-Uses.htm
    http://www.macobserver.com/tmo/article/8-important-things-you-can-do-with-an-ipa d
    http://iconlibrary.iconshock.com/tutorials/50-things-you-can-and-cant-do-with-yo ur-new-ipad/
    iPad vs Android:
    http://ipad.about.com/od/ipad_competition/tp/iPad-vs-Android-Which-Tablet-Should -You-Buy.htm
    http://www.cnet.com/topics/tablets/best-tablets/

  • RAC 10g on Sun Cluster 3.1 U3 and Interconnect

    Hello,
    I have the following Interconnects on my Sun Cluster:
    ce5: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
         inet 1.1.1.1 netmask ffffff80 broadcast 1.1.1.127
         ether 0:3:ba:95:fa:23
    ce5: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 6
         ether 0:3:ba:95:fa:23
         inet6 fe80::203:baff:fe95:fa23/10
    ce0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
         inet 1.1.0.129 netmask ffffff80 broadcast 1.1.0.255
         ether 0:3:ba:95:f9:97
    ce0: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 7
         ether 0:3:ba:95:f9:97
         inet6 fe80::203:baff:fe95:f997/10
    clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 index 8
         inet 1.1.193.1 netmask ffffff00 broadcast 1.1.193.255
         ether 0:0:0:0:0:1
    In the Installation of RAC the routine will ask me which Interface I will use for RAC Interconnect and I do not know if it does not matter which Interface I choose, because I nevertheless in any case I have an SPOF.
    Can anybody help??
    Thank you very much

    Sorry for the late reply, but the interface to pick is the clprivnet0. This load-balances over the available private interconnects under the covers and so does not represent a single point of failure.
    Tim
    ---

  • Need information about creadit card process in ESS and transaction PR05

    Hello,
    Can anybody explain me the credit card clearing in ESS and information about transaction PR05...Its very urgent...No doubt...Good help will be appreciated and honoured...
    Thanks,
    Tushar

    Dear Sarthak M,
               Assume you have gone through the transaction BAPI,
    where you can find all relevant BAPI's .
    select the relevant text such as "sales orders" - from the right side of the screen - check "Tools" tab,where you will find "Create BAPI list", click to search for the Function moduels.

  • Sun Cluster 3.2  without share storage. (Sun StorageTek Availability Suite)

    Hi all.
    I have two node sun cluster.
    I am configured and installed AVS on this nodes. (AVS Remote mirror replication)
    AVS working fine. But I don't understand how integrate it in cluster.
    What did I do:
    Created remote mirror with AVS.
    v210-node1# sndradm -P
    /dev/rdsk/c1t1d0s1      ->      v210-node0:/dev/rdsk/c1t1d0s1
    autosync: on, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: AVS_TEST_GRP, state: replicating
    v210-node1# 
    v210-node0# sndradm -P
    /dev/rdsk/c1t1d0s1      <-      v210-node1:/dev/rdsk/c1t1d0s1
    autosync: on, max q writes: 4096, max q fbas: 16384, async threads: 2, mode: sync, group: AVS_TEST_GRP, state: replicating
    v210-node0#   Created resource group in Sun Cluster:
    v210-node0# clrg status avs_test_rg
    === Cluster Resource Groups ===
    Group Name       Node Name       Suspended      Status
    avs_test_rg      v210-node0      No             Offline
                     v210-node1      No             Online
    v210-node0#  Created SUNW.HAStoragePlus resource with AVS device:
    v210-node0# cat /etc/vfstab  | grep avs
    /dev/global/dsk/d11s1 /dev/global/rdsk/d11s1 /zones/avs_test ufs 2 no logging
    v210-node0#
    v210-node0# clrs show avs_test_hastorageplus_rs
    === Resources ===
    Resource:                                       avs_test_hastorageplus_rs
      Type:                                            SUNW.HAStoragePlus:6
      Type_version:                                    6
      Group:                                           avs_test_rg
      R_description:
      Resource_project_name:                           default
      Enabled{v210-node0}:                             True
      Enabled{v210-node1}:                             True
      Monitored{v210-node0}:                           True
      Monitored{v210-node1}:                           True
    v210-node0# In default all work fine.
    But if i need switch RG on second node - I have problem.
    v210-node0# clrs status avs_test_hastorageplus_rs
    === Cluster Resources ===
    Resource Name               Node Name    State     Status Message
    avs_test_hastorageplus_rs   v210-node0   Offline   Offline
                                v210-node1   Online    Online
    v210-node0# 
    v210-node0# clrg switch -n v210-node0 avs_test_rg
    clrg:  (C748634) Resource group avs_test_rg failed to start on chosen node and might fail over to other node(s)
    v210-node0#  If I change state in logging - all work.
    v210-node0# sndradm -C local -l
    Put Remote Mirror into logging mode? (Y/N) [N]: Y
    v210-node0# clrg switch -n v210-node0 avs_test_rg
    v210-node0# clrs status avs_test_hastorageplus_rs
    === Cluster Resources ===
    Resource Name               Node Name    State     Status Message
    avs_test_hastorageplus_rs   v210-node0   Online    Online
                                v210-node1   Offline   Offline
    v210-node0#  How can I do this without creating SC Agent for it?
    Anatoly S. Zimin

    Normally you use AVS to replicate data from one Solaris Cluster to another. Can you just clarify whether you are replicating to another cluster or trying to do it between a single cluster's nodes? If it is the latter, then this is not something that Sun officially support (IIRC) - rather it is something that has been developed in the open source community. As such it will not be documented in the Sun main SC documentation set. Furthermore, support and or questions for it should be directed to the author of the module.
    Regards,
    Tim
    ---

  • Information about file Id, Logical file name and Physical file name

    Hi All,
    I am testing one program. Selection screen has 3 parameters, File Id, Logical File Name and Physical file name. In Physical File name, i am giving complete file name with path. But it is giving error. Please tell me, what is File id and what all information i need to enter for logical file name and physical file name.
    Thanks
    Puneet Aggarwal

    hi,
    try using this for filename.
    parameters : p_file like rlgrap-filename.
    Thanks,
    Gaurav

  • Some information about SUN IDM

    Hi,
    I am new in IDM and want to know some thing about it.
    1. Is it free software to impliment in any organigation.
    2. From where i can down load it.
    Thanks......

    its listed in the JAVA enterprise software... under identity management.
    go to downloads... & you can download them....
    for info to work on... theres a long way ahead of you SIR.....
    Docs, forums... etc would be the best source for more info...

  • Information about Global Usage Code in 10g and 11g

    Hi all,
    While creating TP in 10g in Step 4: Create Trading Partner: Delivery Channel , there is a field Global Usage Code which has values as 'Test' or 'Production'.
    But in case of 11g, i dont see a field for Global Usage Code. If it is not present in the front end, then does B2B 11g picks this value from backend?
    Can someone provide some pointers on this??

    As far as I know, "Global Usage Code" was an indicator field only and used to specify the usage of the delivery channel. If it is set to Test, then the delivery channel is used only for testing purposes. If it is set to Production, then it is used only for production purposes. It has no affect on actual message processing.
    This field is no more available in 11g and such indication is also not required because of Weblogic domain concept as you will have at least different domains for diferen environments (if you are using same installation fo all env)
    Regards,
    Anuj

  • LSO : need informations about relation between course and training need

    Hi all,
    i need some informations about relation between course (object E) and training need (object TN). After some tests, i note in my environment (SAP ECC6) that this objects are not related, there is no occurrence in table HRP1001. So, why ?
    Cheers

    Hi,
    tranining needs (TN) are linked to training types (D).
    You can also find information in SAP Service Marketplace
    http://service.sap.com/hrfr under France -> Media Center -> Training Needs Management
    Regards
    Frank

  • Get information about users, which shows and works on my webdynpro

    Hi everybody
    I need to know, what is the form to get the information about de user, who's shows and entry my webdynpro. i need this information to send to RFC Model to ABAP server

    Use the UME for that:
    try {
         IWDClientUser wdUser;
         wdUser = WDClientUser.getCurrentUser();
         IUser user = wdUser.getSAPUser();
    } catch (WDUMException e) {
         e.printStackTrace();
    variable "user" has now all the data from the current user executing the dynpro,  extract the info from "user", then pass it as input parameter to your RFC's.
    Regards
    Julio C. Herrera

  • Sun Cluster 3.0 update 1 on Solaris 8 - panics!

    I am building a test system in our lab on admittedly unsupported hardware configurations but the failure wasn't expected to be so dramatic. Setup as follows:
    2x E250 (single processor, 512 MB RAM)
    dual connected to D1000 fully populated 18 Gb HDD
    Solaris 8 6/00 with all latest recommended patches
    Sun Cluster 3.0 update 1 installed with latest patches.
    On first reboot (on either node), the kernel panics with the following:
    panic[cpu0]/thread=3000132c320: segkp_fault: accessing redzone
    This happens straight after the system sets up the network and happens like that everytime and is easily reproduceable. My question is, has anyone successfully used SC3.0 update 1 on Solaris 8 6/00? Any information would be most appreciated.
    -chris.

    We have the same problem with 2 SUN E420 and a D1000 storage array.
    The problem is releted to the settings on the file :
    /etc/system
    added by the cluster installation :
    set rpcmod:svc_default_stksize=0x4000
    set ge:ge_intr_mode=0x833
    the second one line try to set a Gigabit Ethernet Interface that does not exist.
    We comment out the two line and every things work fine.
    I'm interesting to know what you think about Sun Cluster 3.0. and your experience.
    email : [email protected]
    Stefano

  • Content Server on Sun Cluster

    Hello.
    Does anybody know, is Contenr Server can work on Sun Cluster?
    I did not find any information in notes or PAM. Technically, Sun Cluster support both Apache and MaxDB.

    HI,
    It is supported on sun cluster. You can use Apache 2.052 and MaxDB 7.6
    Anirudh,

Maybe you are looking for