Information from Catalyst 4507 by SNMP

Hello community!
I need to get access to egp and host catalogs by snmp. I have the following switch's configuration:
snmp-server community public RO
snmp-server community privete RW
Can you help me why doesn't it work?

What version of IOS are you running?
Exterior Gateway Protocol (EGP) is BGP predecessor. I doubt that anybody is still running it.
The support for EGP has been removed from IOS, at the same time as IGRP, in the 12.2T train. Therefore support for EGP is not available in 12.3 and up.
If you're still using a old OS, we can find details on what exactly you want to manage in EGP.
If you mean BGP, you can configure the device for BGP traps and BGP related data, you can configure BGP traps or poll using CISCO-BGP4-MIB.
-Thanks
Vinod

Similar Messages

Collecting information from Cisco switchs using SNMP

Dear All,
I have a wide network with more than 250 sites connected using the DSL. the WAN devices are under the provider responsability and the LAN devices are directly in my responsability. In each site, I have :
1 or 2 Cisco switchs (2960 or 3560), connecting via fibr.
or
Linksys switch connected via ethernet cable
and
cisco 877 router connected to switch
cisco 881G router conected to switch
pc and printers
In order to improve the availibilty of our network, we lauch every day a script from local pc to test connectivity of LAN equipements :
ping to switchs (Vlan 1), ping to ip fa0/0 cisco router1, ip cisco router2, ping to HSRP address (of two router). the resulting ini file will be inserted in a database and exported to excel for analysing.
I'm asking if someone can help in order to implement SNMP and let me know the name of cisco MIB to implement to :
- to have from SNMP information, the result of show cdp nei, show interface status, show ip int brief,...
- to have if wan router LAN interface are up,connected
- others usefuls informations.
Thanks and regards,
AA

Hi,
the basic SNMP config for 2960 and 3560 is:
     snmp-server community <> RO
The configuration for SNMP traps to get alerts from the device if there is for example a failure with a fan is:
          snmp-server enable traps
          snmp-server host <> <>
This enables all traps available with your IOS version. You can the disable not wanted traps by using the "no"-command like this.
Example for dot1x traps:
          no snmp-server enable traps dot1x
With a snmp client you can then do a snmpwalk (or snmp get) without a specific OID to get all the SNMP information from the device:
On a Linux server the following command should work:
     snmpwalk -v 2c -c <> -T <>
-v = use SNMP version 2c
-c = use the community string you configured on the device
-T = output in the dotted decimal format
But be careful, this will be a lot of data output.
Here you will find a docu for configuring SNMP on a Cisco device:
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf014.html
Sven

How to read MAC from Catalyst WS-C4507R using SNMP

Hello!
I would like to get all the connected mac addresses from a Switch using SNMP. The all ports are set up as a VLAN 10. VLAN 2 is used as management interface.
#sh mac-address-table
Unicast Entries
vlan   mac address     type        protocols               port
-------+---------------+--------+---------------------+--------------------
   2    0013.c3c2.1cbf    static ip,ipx,assigned,other Switch
   2    c42c.030b.c1b5   dynamic ip,other              GigabitEthernet1/1
10    3c62.0078.44a7   dynamic ip                    FastEthernet3/4
10    3c62.0078.44aa   dynamic ip,other              FastEthernet3/4
10    3c62.0078.4b31   dynamic ip                    FastEthernet3/1
10    3c62.0078.4cb7   dynamic ip                    FastEthernet3/2
Multicast Entries
vlan    mac address     type    ports
-------+---------------+-------+--------------------------------------------
   1    ffff.ffff.ffff   system
   2    ffff.ffff.ffff   system Switch,Gi1/1
10    0100.5e7f.fffa     igmp Fa3/4
10    ffff.ffff.ffff   system Fa3/1,Fa3/2,Fa3/4
I used to work with the following string on an old 2950 Switch SNMPv2-SMI::enterprises.236.4.1.8.7.7.10.1.2.1 but this string is not working on the 4500.
Can anyone help me with my issue?
Thank you,
Andreas

Hi kehander,
Thanks for the reply. I tried filling a constant path with the Mac-defined path to a data file on the USB disk (ie "DATA2:file1.dat"). This resulted in the same error message.
I then considered that maybe I was misinterpreting the LV error message, and that perhaps I was supposed to address the file using PC-notation (ie. "DATA2\file1.dat"), even though the app is running on a Mac. No joy with this, but I get a different error msg:
"Error 1430 occurred at Open File
Possible reason(s):
LabVIEW: The path is empty or relative. You must use an absolute path."
Can you share what your reasoning was for your suggestion... I'm not sure I understand why a constant path would produce different results?

WCCP version 2 on Catalyst 4507 w/SupII+

Hello,
I am try to do a lab with WAAS but I have a switch Catalyst 4507 with Supervisor II+.
When I am doing the configuration, I can´t use the "ip wccp redirect exclude in" on the vlan where reside the WAAS.
The show version is:
MBO-SW-01#
MBO-SW-01#
MBO-SW-01#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 30-Oct-09 14:39 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11D20300
ROM: 12.2(31r)SGA1
Dagobah Revision 226, Swamp Revision 34
MBO-SW-01 uptime is 4 weeks, 6 days, 22 hours, 14 minutes
Uptime for this control processor is 4 weeks, 6 days, 22 hours, 15 minutes
System returned to ROM by power-on
System restarted at 16:57:06 CCS Mon May 10 2010
System image file is "bootflash:/cat4500-ipbasek9-mz.122-53.SG1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
[email protected]. WS-C4507R (MPC8245) processor (revision 10) with 262144K bytes of memory.
Processor board ID FOX1151GHMY
MPC8245 CPU at 266Mhz, Supervisor II+
Last reset from PowerUp
7 Virtual Ethernet interfaces
48 FastEthernet interfaces
26 Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
If
cisco
Configuration register is 0x102
MBO-SW-01#
MBO-SW-01#
MBO-SW-01#
MBO-SW-01#sh mod
Chassis Type : WS-C4507R
Power consumed by backplane : 40 Watts
Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1     2 Supervisor II+ 1000BaseX (GBIC)        WS-X4013+          JAE12035A3E
3    24 10/100BaseTX (RJ45)V, Cisco/IEEE       WS-X4224-RJ45V     JAE1038BPFF
4    24 10/100BaseTX (RJ45)V, Cisco/IEEE       WS-X4224-RJ45V     JAE1041D5JM
5    24 10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4524-GB-RJ45V JAE11517SDQ
M MAC addresses                    Hw Fw           Sw               Status
--+--------------------------------+---+------------+----------------+---------
1 001f.9e15.32c0 to 001f.9e15.32c1 4.5 12.2(31r)SGA 12.2(53)SG1      Ok
3 0016.4617.b1b8 to 0016.4617.b1cf 2.3                               Ok
4 0018.18b5.85e8 to 0018.18b5.85ff 2.3                               Ok
5 0017.0ec4.6350 to 0017.0ec4.6367 2.3                               Ok
Mod Redundancy role     Operating mode      Redundancy status
----+-------------------+-------------------+----------------------------------
1   Active Supervisor   SSO                 Active
MBO-SW-01#
MBO-SW-01#sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier:                   192.168.166.1
        Protocol Version:                    2.0
    Service Identifier: 61
        Number of Service Group Clients:     0
        Number of Service Group Routers:     0
        Total Packets s/w Redirected:        0
          Process:                           0
          CEF:                               0
        Redirect access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
    Service Identifier: 62
        Number of Service Group Clients:     0
        Number of Service Group Routers:     0
        Total Packets s/w Redirected:        0
          Process:                           0
          CEF:                               0
        Redirect access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
MBO-SW-01#
MBO-SW-01#
MBO-SW-01#
MBO-SW-01#sh ip wccp in
MBO-SW-01#sh ip wccp interfaces
WCCP interface configuration:
    FastEthernet3/5
        Output services: 0
        Input services: 1
        Mcast services: 0
        Exclude In:      FALSE
MBO-SW-01#
Who can I do, to get this work????
Thank a lot

Hi Zach,
Thanks for your answer, but I don´t have clearly the scenario of your answer.
I´m attaching the Logical Topology; and the configuration is this:
Configration of the Edge Site:
MBO-RT-03#
MBO-RT-03#sh run
Building configuration...
Current configuration : 10757 bytes
version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
service sequence-numbers
hostname MBO-RT-03
boot-start-marker
boot-end-marker
ip wccp 61
ip wccp 62
ip cef
interface FastEthernet0/0
description TRONCAL LAN
no ip address
duplex auto
speed auto
interface FastEthernet0/0.202
description *** Vlan for Connection with WAE / Edge ***
encapsulation dot1Q 202
ip address 10.201.201.1 255.255.255.248
ip wccp redirect exclude in
interface FastEthernet0/0.210
description *** Vlan for Users ***
encapsulation dot1Q 210
ip address 192.168.166.129 255.255.255.128
ip wccp 61 redirect in
interface FastEthernet0/1
description *** WAN LINK - EMULATION ***
bandwidth 128
ip address 10.100.100.2 255.255.255.252
ip wccp 62 redirect in
ip nbar protocol-discovery
ip flow ingress
load-interval 30
duplex auto
speed auto
traffic-shape rate 128000 128000 128000 1000
router eigrp 1600
passive-interface default
no passive-interface FastEthernet0/1
network 10.100.100.2 0.0.0.0
network 10.201.201.1 0.0.0.0
network 192.168.166.128 0.0.0.127
no auto-summary
control-plane
line con 0
privilege level 15
password 7 121A150402181B00787B7578
login authentication userauthen
line aux 0
line vty 0 4
session-timeout 5
privilege level 15
password 7 121A150402181B00787B7578
login authentication userauthen
scheduler allocate 20000 1000
end
MBO-RT-03#
MBO-RT-03#
MBO-RT-03#
MBO-RT-03#sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier:                   192.168.166.129
        Protocol Version:                    2.0
    Service Identifier: 61
        Number of Service Group Clients:     1
        Number of Service Group Routers:     1
        Total Packets s/w Redirected:        39212
          Process:                           0
          CEF:                               39212
        Service mode:                        Open
        Service Access-list:                 -none-
        Total Packets Dropped Closed:        0
        Redirect Access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group Access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
    Service Identifier: 62
        Number of Service Group Clients:     1
        Number of Service Group Routers:     1
        Total Packets s/w Redirected:        38171
          Process:                           0
          CEF:                               38171
        Service mode:                        Open
        Service Access-list:                 -none-
        Total Packets Dropped Closed:        0
        Redirect Access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group Access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
MBO-RT-03#
MBO-RT-03#
MBO-RT-03#
MBO-RT-03#sh ip wccp inter
WCCP interface configuration:
    FastEthernet0/1
        Output services: 0
        Input services: 1
        Mcast services: 0
        Exclude In:      FALSE
    FastEthernet0/0.210
        Output services: 0
        Input services: 1
        Mcast services: 0
        Exclude In:      FALSE
    FastEthernet0/0.202
        Output services: 0
        Input services: 0
        Mcast services: 0
        Exclude In:      TRUE
MBO-RT-03#
MBO-RT-03#
MBO-RT-03#sh ver
Cisco IOS Software, 2801 Software (C2801-ADVENTERPRISEK9-M), Version 12.4(24)T2, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 19-Oct-09 18:21 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)
MBO-RT-03 uptime is 4 hours, 55 minutes
System returned to ROM by reload at 11:39:53 CCS Wed Jun 16 2010
System image file is "flash:c2801-adventerprisek9-mz.124-24.T2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html you require further assistance please contact us by sending email to
[email protected]. 2801 (revision 5.0) with 240640K/21504K bytes of memory.
Processor board ID FTX0926W2NP
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 Virtual Private Network (VPN) Module
2 Voice FXO interfaces
3 DSPs, 40 Voice resources
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
If
Cisco
Configuration register is 0x2102
MBO-RT-03#
And the Core Site has a 4507R with this configuration:
MBO-SW-01#sh run
Building configuration...
Current configuration : 33778 bytes
! Last configuration change at 16:54:12 CCS Wed Jun 16 2010 by dsalazar
! NVRAM config last updated at 16:05:21 CCS Wed Jun 16 2010 by dsalazar
version 12.2
service nagle
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
service compress-config
service udp-small-servers
service tcp-small-servers
service sequence-numbers
hostname MBO-SW-01
boot-start-marker
boot system flash bootflash:/cat4500-ipbasek9-mz.122-53.SG1.bin
boot-end-marker
logging buffered 1024000
logging console critical
enable secret 5 $1$vzCG$bkRWJO0nJuUvYq5mmU8G00
username cps privilege 15 password 7 011016174B18110B731C1F59
username CNAC_User privilege 0 password 7 096F602829040401595C557A
aaa new-model
aaa authentication login default local-case group radius enable
aaa authentication dot1x default group radius
aaa authorization network default group radius
qos
   qos aggregate-policer Prueba 128000 bps 1000 byte conform-action transmit exceed-action drop
ip subnet-zero
ip wccp 61
ip wccp 62
policy-map QoS_Prueba
class class-default
police aggregate Prueba
interface FastEthernet3/5
description *** WAN LINK - Emulation ***
no switchport
bandwidth 128
ip address 10.100.100.1 255.255.255.252
ip wccp 62 redirect in
load-interval 30
service-policy output QoS_Prueba
interface Vlan2
description *** Vlan of Server ***
ip address 192.168.162.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip wccp 61 redirect in
interface Vlan910
description *** Vlan for WAE / Core and Mgmt ***
ip address 10.200.200.1 255.255.255.248
router eigrp 1600
passive-interface default
no passive-interface Vlan1
no passive-interface Vlan710
no passive-interface FastEthernet3/5
no auto-summary
eigrp stub connected summary
eigrp event-logging
network 10.0.2.1 0.0.0.0
network 10.100.100.1 0.0.0.0
network 172.16.0.1 0.0.0.0
MBO-SW-01#
MBO-SW-01#sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier:                   192.168.166.1
        Protocol Version:                    2.0
    Service Identifier: 61
        Number of Service Group Clients:     0
        Number of Service Group Routers:     0
        Total Packets s/w Redirected:        0
          Process:                           0
          CEF:                               0
        Redirect access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
    Service Identifier: 62
        Number of Service Group Clients:     0
        Number of Service Group Routers:     0
        Total Packets s/w Redirected:        0
          Process:                           0
          CEF:                               0
        Redirect access-list:                -none-
        Total Packets Denied Redirect:       0
        Total Packets Unassigned:            0
        Group access-list:                   -none-
        Total Messages Denied to Group:      0
        Total Authentication failures:       0
        Total Bypassed Packets Received:     0
MBO-SW-01#
MBO-SW-01#sh ip wccp in
MBO-SW-01#sh ip wccp interfaces
WCCP interface configuration:
    FastEthernet3/5
        Output services: 0
        Input services: 1
        Mcast services: 0
        Exclude In:      FALSE
    Vlan2
        Output services: 0
        Input services: 1
        Mcast services: 0
        Exclude In:      FALSE
MBO-SW-01#
As you can see on the Catalyst 4507R the following stats are 0
     Number of Service Group Clients:     0
     Number of Service Group Routers:     0
for the services 61 and 62.
In the Router that start reflect a diferent value.
I can appreciate a technical information about how can I configure WCCP for the comunication between the Catalyst 4507 with Sup II+ with the WAE 474.
I probed with other router instead the catalyst 4507 and the configuration and communication were succesfully; that was for verify posible error of configuration on WAEs; but the final objetive is to use the catalyst 4507R.
Thank for your assistance.

Prime Infrastructure 2.1 - getting informations from Nexus7Ks about ip to mac to physical pot table

Hello,
does anybody know if there's a way to get the following informations out of nexus 7000 and nexus 5000/2000 switches?
Environment/requirements:
- snmp v3 has to be used
- N7ks are configured with several vrfs
- SW N7K: 6.2.8a
- SW N5K: 6.0(2)N2(4)
- Prime Infrastructure 2.1
I want to see under Clients and Users entries about mac-address, ip-address, interface and vlan.
At the moment, I only get informations from N5Ks/N2Ks without ip-addresses. From the N7ks I don't get any informations.
Any hints or tricks, how to get these informations with PI2.1 out of the nexus boxes?
best regards
Markus

Hi Andy,
Check the below link , as per this Doc .. User tracking is supported in 2.0:
http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
Thanks-
Afroz
[Do rate the usefu post]

How can I transfer information from one ipad to another?

how can I transfer information from one ipad to another ?

What kind of information? You can sync things like Contacts and Calendars by using iCloud. You can backup one iPad to iTunes on a computer and then sync the backup to the other iPad. You can configure your iTunes content and sync the same content to both iPads.
It is based on what you want to do. Or are you looking for a way to send files from one iPad to another wirelessly? There are apps to do things like that, as well as cloud services, such as DropBox.

How can I move information from one icloud account to a brand new one?

I've shared an icloud account with my sister for years and I want to get one with just my information. However, I'm not sure how to move or copy all of my information from my old icloud account into a brand new one and not lose any. Making a brand new one for my sister and keeping the old one isn't an option because she doesn't want to lose anything either. Help???

To migrate to a new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud), provide the password to turn off Find My iPhone and choose Keep on My iDevice when prompted. Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.
Once you are on separate accounts, you can each go to iCloud.com and delete the other person's data from your account.

How do I remove credit card information from iTunes account?

How do I remove credit card information from iTunes account?

If you have an unpaid balance or payment due, you can't select None as your payment type.
To see which order you need to pay for, view your purchase history.
When you sign in to the store, you may see a message that there was a billing issue with your last order.
Click the Billing Info button to see the order.

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

Error on Desktop: iTunes unable to load data class information from sync services.

Error on Desktop; iTunes unable to load data class information from sync services.

Hi there Randall112,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
-Griff W.

HT201335 I started playing games on my iPhone 5 and bought the iPad air wand to link phone with iPad so all the information from the game is on my iPad so I don't have to start the game over I should be able to start from the same place in the game on ei

I need to link all of my games on my iPhone 5 to my iPad air so I don't have to start all my games over. In the Game Center all the information from my games are there but it's like I have to start the game over on my iPad. I should be able to resume the game from the same place on either device with the same trophies $ coins help help help PLEASE I have a lot of money invested in one game and don't want to start completely over

Transferring from old to new
http://support.apple.com/kb/HT2109

How to get user information from ldap - bpm11g

hi all,
i need know how to do get information from ldap, but using adf bean for show user data in adf form.
anyone knows about this ?
tks.

Neal wrote:
>
Hi,
I am using WLS default authentication to protect my JSP pages. Can someone tell
me if it is possible to add more fields to the default login box (in addition
to login and password boxes, I want to ask user the department name). In additional,
can WLS propogate this information (department name) along with other security
credentails to other J2EE components such as EJBs? In my EJBs I want to be able
to get the department name that user provided during login and then use that for
conditional business logic.
Any insights on this subject will be greatly appreciated.
TIA,
-NealYou can't do this with the default simple authentication. That can only handle a
username / password combination.
You should be able to do this with JAAS. You could write a LoginModule that
populates the department as a Principal or public Credential on the Subject in
addition to the normal authentication. You would have to do a callback handler
that passed through the department info to it.
This link has more on WLS's stab at JAAS:
http://e-docs.bea.com/wls/docs61/security/prog.html#1039659
Once you have associated the Subject with the access control context by invoking
a doAs() you should be able to get it back at any point with
Subject.getSubject(AccessController.getContext()) to get access to the
department info.
It will all be a bit of a chore, mind.

How do I get all information from my smart phone 4 to my new smart phone 5

How can I move all information from my iPhone 4 to my iPhone 5?

Using iTunes for this is recommended over iCloud since it will be faster and more thorough. Set the backup to be stored locally on the computer's drive.

Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Information from Catalyst 4507 by SNMP

Similar Messages

Maybe you are looking for