Information is lost after redeployment of SAPMEINT - which workaround?

Hello!
After redeployment of SAPMEINT I noticed that some information concerning the SAMEINT MII webservices gets lost.
I corrected this information manually afterwards - the information can be found in the old SAP ME 5.2 documentation
(pre SP05).
What I did was first undeploy of SAPMEINT and immediately afterwards a new deploy.
Was the undeploy step unnecessary and therefore this step caused this annoyance?
Or is it always necessary to re-run the SAPMEINT configuration wizard?
I know that it is this configuration wizard, which updates the information as part of its function.
This is the manual workaround:
1. Log on the SAP NW admkinistratior console
2. Goto Configuration Management / Infrastructure / Java System Properties / choose Applications tab
3. Search for application xappsmeintegration~ear
4. Change the following properties:
webservice.authenticationMechanismType = 1
webservice.Username = MESYS
webService.Password = <password of MESYS>
webservice.EndPointUrlPrefix = <URL to (MII hostname:port)/XMII/SOAPRunner>
Kr,
           Erich Lind

Hello,
thank your for the answer and clarification.
The have the benefit of the newest SAPMEINT version, this was deployed on the MII system.
In future the SAPMEINTCTC wizard will be executed after redeployment of SAPMEINT.
Kr,
          Erich Lind

Similar Messages

  • DB Connection lost after redeployment

    Hi All,
    We are not able to get a connection to the Db whenever we redeploy the application. basically our Db connection code throws " Unable to find the DataSource which is a valid one". But after restart the application server, everything seems OK. I am sure someone would have encountered similar scenario in your application. Please share and advise me on the workaround. In fact i have tried to reset the connection pool and also the datasource. From the admin console i can test the Db connection and all are healthy.
    Appreciate your reply.
    Cheers,
    Kanda.V

    Kanda Samy wrote:
    Hi All,
    We are not able to get a connection to the Db whenever we redeploy the application. basically our Db connection code throws " Unable to find the DataSource which is a valid one". But after restart the application server, everything seems OK. I am sure someone would have encountered similar scenario in your application. Please share and advise me on the workaround. In fact i have tried to reset the connection pool and also the datasource. From the admin console i can test the Db connection and all are heal
    thy.
    Appreciate your reply.
    Cheers,
    Kanda.VHi. This sounds like an issue that should be addressed by official support.
    Please contact support and open a case.
    Joe

  • Trading partner information getting lost during the IO and PS settlements

    Hello,
    When the settlement is run for an internal order or a WBS element, although the primary cost element line has the trading partner information, this information is lost after the settlement process. The settlement can not carry the trading partner detail further. I can see this detail in CO tables or in PS tables before it has been settled. (Tbale name is COSP) But the table that keeps the settled objects (as far as I kow the table name is COSS) does not have the trading partner field in it.
    If anyone knows whether there is a way to keep this type of detail after the settlement process has been executed in the system, it would be great.
    Thanks
    Aysegul Gumus

    I am not looking for the tables. What I am looking for is to find out whether there is a way to keep the trading partner information in the settlement process so I can see it in the settled cost lines.
    Have you met such a business requirement before?
    Aysegul

  • Which kind of permission will lost after re-build Windows OS

    Dear professional guys :
    I have to rebuild my File Server (Win2008R2) because of hardware issues.    But I am not sure which kind of permission will lost after re-build it.  
    This server only have 1 share folder named 'sharefile' and its share permission is simple (only domain user can read) but we had deployed its NTFS permission before.   I know we can backup its ntfs permission by icacls (it is really a great tool).  But
    I just confused which kind of permission will lost ??   Whether domain user permission will be kept as before ?  
    I don't think NTFS permission information was saved in OS, it seems saved in file/folder properties.    
    Do you have any good opinion ?    
    I searched many docs and books but really can't find any useful information. 
    Thanks in advance. 
    Frank

    Hi Frank,
    The local user accounts will retain in NTFS permissions after re-build Windows Operating System. User accounts not belonging to the local user accounts such as domain user will not be recognized by the File Server.
    Best Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Account Information Keeps Getting Lost After it is Saved

    At my office computer we have an iTunes account that is to be used at our office as well as a couple places around the world. We have entered in all of our credit card and billing information and yet, after we sign out and sign back in, when we try to purchase a song and put in our login and password, we are taken to an account verification page that, even if we verify, does not allow us to purchase a song. We have reset iTunes and re-entered the credit card information fully. What could be the cause of this. The work computer I use does use Vista. Any thoughts are appreciated.

    Delete the WAP from your list of preferred networks and also delete it from your keychain using Keychain Access. Then re-add. I had to do this for bith a WPA and a WPA2 access point. Funny thing is that after upgrading to 10.4.8 it took two days for the WPA account to start misbehaving and another 4 days till the WPA2 one started dropping. Deleting completely and re-adding them fixed it both times.

  • Keep shared=true after redeploy

    Hi,
    I have a secure web site. In my production environment I need to set shared=true for my web-app(s) in the secure-web-site.xml configuration file (\j2ee\home\config). I noticed that every time I redeploy the EAR, I need to add again the shared attribute for my application in the xml file. Of course a restart of the application server is next necessary.
    Is there any way to make this configuration permanent (deployment descriptor or system level setting)? Is there any way to set the shared setting from the Enterprise Manager console?
    Thank you for the attention,
    Alex

    Hi again,
    After reading some additional information, namely:
    Oracle® Containers for J2EE / Configuration and Administration Guide / 10g Release 3 (10.1.3) / Part No. B14432-01
    How to Share HTTP and HTTPS Session [ID 401545.1]
    Session Information Of All Applications Are Lost When Redeploying With Dcmctl Command [ID 273230.1]
    I guess the answer is evident. To quote ID 401545.1:
    "Please take note this capability cannot be enabled from deployments descriptors (in the ear or war file) and it cannot be set using the AS Console."
    I have written that I need shared=true but in fact I only need it because otherwise my SSL session breaks too often (and doesn't respect the timeout interval)!
    Playing around with the shared attribute is the only remedy I have found so far. I haven't done a review of each packet that is transmitted but according to the SSL debug log everything seems fine. What I understood from the documentation was that some browsers threat sessions in different manner and sometimes they start a new session before the timeout.
    My tests with Firefox and Internet Explorer both fail in keeping a SSL session running normally. I don't know if there is a special setting for this in the browser and I couldn't catch a fixed interval for session expiration. My deployment description is fixed to 15-30 minutes but sometimes a session will timeout in a minute or two.
    Does anybody have had a problem with SSL session timeout on Oracle AS 10.1.3 ?

  • Only page 1 prints well. Page 2 is offset to the right and information is lost at the page break. FireFox 8 and 9, Mac OS 10.6.8

    Mac OS 10.6.8 FireFox 8 and 9
    If I print a web page, either just print or save as PDF, only the first page prints well. Page 2 is offset to the right such that the information is cut off at the right edge. Information is lost at the page break, several lines of text will be lost. If I need to print a page, I open Safari, which does a very nice job of formating the page for print. But I want to use FireFox. Can you help me?

    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
    If it does happen in both safe mode and with a new profile, please post the contents from about:support

  • Only page 1 prints well. Page 2 is offset to the right and information is lost at the page break. FireFox 8 and 9, Mac OS 10.5.8

    This is very similar to a previous post with a later version of OS X, but the fix that worked for the original poster does not work for me.
    Mac OS 10.5.8 FireFox 8 and 9. If I print a web page, either just print or save as PDF, only the first page prints well. Page 2 is offset to the right such that the information is cut off at the right edge. Information is lost at the page break, several lines of text will be lost.
    I use several add-ons for work that are only on Firefox, so using another browser doesn't help much.

    Somebody had a similar problem and was advised to start in safe mode or create a new profile. (Here: https://support.mozilla.org/en-US/questions/906274?s=firefox+print+first+page&r=2&e=sph&as=s). Starting in safe mode disabling all add-ons does not fix the problem for me. When I try to follow the instructions here (https://support.mozilla.org/en-US/kb/Managing-profiles) to start the profile manager, Terminal gives me an error message after I enter the line of text: "The application firefox-bin quit unexpectedly." I have tried it with and without the "-bin" (the error message is the same - just with or without the "-bin"), with a capital or lower case P at the end. Nothing works. Please help.

  • Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

    My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work. 
    Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

    After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
    The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
    I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

  • Problem staring KJS after redeploying application in IAS6SP2

    After redeploying an application to IAS6SP2 several times, I suddenly get
    the following errors when trying to start KJS:
    Starting Java Engine
    Engine running on Solaris VM 1.2.2 JVM supplied by Sun Microsystems Inc.
    Connected to LDAP server
    Initializing LDAP cache from server
    Could not initialize LDAP cache from server
    [04/Sep/2001 21:36:42:2] error: BINDER-004: GXBindWorker: invalid key defs
    {91F29620-16E1-11CF-96C8-0020AFED9A65}
    [04/Sep/2001 21:36:42:3] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {91F29740-16E1-11CF-96C8-0020AFED9A65}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {ED049D80-B936-1548-E481-080020721767}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {C6783B32-8996-11CF-AA51-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {02E58780-6BC3-11CF-AA3F-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {65F889A0-6BC3-11CF-AA3F-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {01C89538-123C-1850-BAA0-0800208C8EAD}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    The list goes on with more invalid key defs errors, and the server does not
    start. Has anyone seen this before and know how to correct the problem?
    Thanks.
    - Chun Cheng

    This is a problem which was previously discussed on this mailing list.
    Dunno if you tried to restart (iascontrol start) iAS several times but after
    a while all processes bind successfully.
    In a nutshell (assuming you are using < SP2), your problem is that you don't
    clean up your old references when you redeploy. What I mean by that, is you
    should always run "iasdeploy removeapp/removemodule .... " prior to
    redeploying. What you have now is a cache full of stale entries which are
    taking space in the ldap resulting in a slow startup. When you redeploy new
    entries are created (this has been changed in SP3) for all you components
    instead of overwriting.
    hope this helps,
    -robert
    "Chun Cheng" <[email protected]> wrote in message
    news:[email protected]...
    After redeploying an application to IAS6SP2 several times, I suddenly get
    the following errors when trying to start KJS:
    Starting Java Engine
    Engine running on Solaris VM 1.2.2 JVM supplied by Sun Microsystems Inc.
    Connected to LDAP server
    Initializing LDAP cache from server
    Could not initialize LDAP cache from server
    [04/Sep/2001 21:36:42:2] error: BINDER-004: GXBindWorker: invalid key defs
    {91F29620-16E1-11CF-96C8-0020AFED9A65}
    [04/Sep/2001 21:36:42:3] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {91F29740-16E1-11CF-96C8-0020AFED9A65}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {ED049D80-B936-1548-E481-080020721767}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {C6783B32-8996-11CF-AA51-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {02E58780-6BC3-11CF-AA3F-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {65F889A0-6BC3-11CF-AA3F-524153480000}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    [04/Sep/2001 21:36:42:4] error: BINDER-004: GXBindWorker: invalid key defs
    {01C89538-123C-1850-BAA0-0800208C8EAD}
    [04/Sep/2001 21:36:42:4] error: UTIL-loadcomponent_binding: loadComponent:
    binding
    The list goes on with more invalid key defs errors, and the server doesnot
    start. Has anyone seen this before and know how to correct the problem?
    Thanks.
    - Chun Cheng

  • Bug Report: Page # and Icon Lost After Rename

    I love the new file management features in version 10.3 but I noticed some problems right away.
    After renaming a document, the current page position is lost and the document opens at page 1.  This first one I renamed was a 400-page book and this was a bit annoying.  I realize this is consistent with the desktop version which does not save the page position, but it is inconsistent with the iPad behavior for opening and closing documents.  A fix or a warning should be implemented.
    Also lost is the document icon, which reverts to a generic Reader logo.  This is more of a cosmetic thing.  I noticed the icon does not get restored after opening the document.  It seems necessary to scroll down to page 2 for the icon to refresh.

    Here is  the bug report page:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Nokia Maps subscription info lost after firmware u...

    anyone tell me why my maps software has lost the subscription data for navigation - only 10 months used, lost after recent firmware update- dont want to pay again but it keeps asking me to when I want to navigate

    Hi wadders
    Which phone model on what firmware version are you using?
    In Nokia Maps > Options > Extras > My Licenses - what result do you get?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HT2966 Why does ical delete information on calendar after eight months?  Why isn't data retained on calendar? (Apart from actually saving or backing up ical?)

    Why does ical automatically delete information on calendar after eight months or so?  Why doesn't data which has been inserted on calendar remain on the relevant dated calendar?  (Apart from actually saving or backing up calendar). 

    How are your settings in iCal preferences set?
    iCal-->Preferences-->Advanced-->Delete events __ days after they have passed.

  • All music links are lost after installing windows 7!!! HELP!!!

    All music links are lost after installing windows 7!!! HELP!!!
    I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
    please help me!!!!!!!! >_<

    Was that Win 7 update from Lenovo, or Microsoft?  If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
    The easiest way to do that is to first install ThinkVantage System Update and run it.  It should download and install the other drivers and apps.  I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff.  Everything works.
    Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Problems with Premiere Pro 2.0:  sound lost after clip pasting

    To integrate small projects to one bigger Project, it used to work well with Premiere Pro 1.5 in the following way: import small projects into the main sequence of the new project and, in parallel, copy the clips from the timeline of the small projects and past them into the timeline of the new project. However, I am encountering the following problems while trying to do the same thing with Premiere Pro 2.0:
    ·        Video and sound of every pasted clip becomes unlinked.
    ·        Although the sound was there (also shows in the wave view) right after the pasting and it can be rendered, but the audio Information gets lost as soon as I exit the new project (saved beforehand). If I re-open this new project, although the timeline shows all the pasted sound clips, but there is information in them - no sound (the wave views show only straight lines).
    ·        As well, some of the video and audio effect settings get lost (e.g. cross fading), but the effects such as brightness and contrast settings always remain.
    ·        At least one thing seems to be sure: the imported files themselves are ok. Newly created clips in the timeline from those imported files (dragged into the timeline) are fine - no information lost.
    All tips are great helps. Thanks in advance.

    I got it!
    Though not described in the English HELP, but in the German HELP: I have to press the Shift and T Keys. It works in my case with the following steps:
    1.     Mark the corresponding audio and video tracks
    2.     Put CTI over the clip
    3.     Press shift + T
    4.     Double click the clip
    5.     Eventually I have to repeat and press the keys shift +T again.
    Thanks a lot once more for all of the hints and the detailed explanations. It is indeed a great help. I really appreciate it very much.
    tryerlu

Maybe you are looking for