Information Message-Values for Ordinary deprec. have changed in dep. area 0
We had changed the scrap value for few assests and when ever we goto AW01N i.e asset explorer ,it displays the message -
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year XXXX.
The user doesnt this message popping up every time we look at an asset now.
Hi,
start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
Regards,
Markus
Similar Messages
-
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 200
Hi Guru,
I m in the process of upgradation from 4.6C to ECC 6.0.
In Asset Accounting in 4.6C there is a facility of batch input thereby the user can replace the block cost centre by new one. As this facility is not available in ECC 6.0 so I have figured out all asset master in which the block centre are entered. And one by one replace the old cost centre by new one in asset master. When I ran the dep. "AFAB" there were no error. But for few assets the dep. shows positive value and cumulative dep. as zero. When I display the master of these assets and go into asset value of that asset then it give the message
Values for Ordinary deprec. have changed in dep. area 01 in fiscal year 2008
Message no. AU390
Diagnosis
Depreciation terms were changed in depreciation area 01 since the last time depreciation was recalculated. The values for Ordinary deprec. that were saved in the database in fiscal year 2008 are therefore different from the newly calculated values by an amount of 102385.74-.
Procedure
Check if the newly calculated values are correct. If they are, then carry out a depreciation recalculation. You should be aware that if you recalculate depreciation, new values could arise for all open fiscal years, and these would then have to be posted to the general ledger by means of a depreciation posting run.
If, on the other hand, you want to keep the values that are saved in the database, you have to set the depreciation terms back to how they were at the time of the last depreciation recalculation.
To see a comparison of the old and new values, you can use the Display dep. calc. function in the asset value display or the Recalculate values function in the Asset Accounting menu."
Guru, New value is absolutely wrong as it reversed all the dep. charged upto previous period.
please tell me what I can do & how i colud check whether any body has changed the dep. term or not.
Thanks
RajeevHi,
start transaction AFAR for the company code as real run. That will recalculate all asset values and should solve the problem.
Alternative would be to go to AS02 and choose "edit -> recalculate values" from the system menu.
Regards,
Markus -
I was trying to create a text alert. I was calling following in jsp
email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP
PartyManager.createEmail(email, ApiConstant.CONTACT_POINT);
Getting following exception:
Error in saving customer information.
Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.
Error trace:
oracle.apps.ibe.customer.CustomerException: Error in saving customer information. at oracle.apps.ibe.tcav2.Email.create(Email.java:187) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) ... 11 more Error in saving customer information. oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.Tried this but it is giving the below error
APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
Cause: The field PER_ASSIGNMENT_ID could not be located or read.
Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field. -
I have been informed by Orange (UK) that Apple have 'changed their rules' with regards to unlocking iPhones, and that it will take 6 months to process. Is this correct?
Fezzzer wrote:
I have been informed by Orange (UK) that Apple have 'changed their rules' with regards to unlocking iPhones, and that it will take 6 months to process. Is this correct?
Complete rubbish
Apple do not lock iPhones
Carriers do because they have subsidised the purchase price
and therefore only the carrier can unlock an iPhone
Orange have decided to apply 6 months to protect their revenue
they never have been the fastest to unlock -
I have no sound on my MacBook Air for sending and receiving messages. All sound settings have been checked and are OK. This problem has arisen many times and is intermittent in the sense that the sound returns and disappears for no apparent reason.
Open System Preferences > Sound > Sound Effects
Select: Play user interface sound effects
And make sure the Mute box is not selected.
Now open Mail. From the Mail menu bar clik Mail > Preferences then select the General tab.
Make a selection from the: New messages sound pop up menu. -
The problems began when I deleted a ymail account and replaced it with a new ymail account. My main account is a gmail. At some point Yahoo appear to have changed the suffix from ymail.com to yahoo.com. I could not and indeed cannot get iCloud to accept my new account. I kept getting told that my id and password could not be configured. Eventually I tried it on my mini iPad and "hey presto!" no problem at all. My new yahoo account nestles comfortably in iCloud on the mine iPad. But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.Killerfinch wrote:
My new yahoo account nestles comfortably in iCloud on the mine iPad.
No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
Get the correct settings for your account from Yahoo and set it up manually.
By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
That would depend on what you are trying to do. -
Message Type for Material Master Data Changes
Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa -
Any thoughts on how to resolve the above ? Namely I went into settings changed the language to French. Sent a message to soemone in France in French. Went back to settings selected British English. Reset the phone into English, But it still thinks it is 'French' when sending a message or text. Have gone back to settings tried to reset the keyboard to original factory settings. No joy. Switched the phone on and off. No joy, It still assumes it is French when sending a text or email even though the settings are all set for English. Any suggestions on how to resolve tbis ???
Amazing response. Unbelievably fast. Totally helpful. Totally
accurate.
A thousand thanks
Damian -
Received an email from Apple concerning my AOL email not being valid
after March 31 and instructions how to convert to another active email
address - new apple id and pw updated yesterday. Now when I go
on my iphone, icloud asks me for pw to old aol email ID - which I have
forgotten - but that is not now the current Apple Id for my ITunes account.
Not sure how to change it on my phone - when I try to sign out of icloud
so I can go back in and re-enter info, it asks for pw to shut off find my
iphone and I have forgotten the pw. Thanks for any help!Hello there RmCrCo,
it sounds like you need to reset the password for the account you have signed in on your phone you should be able to get that reset wiht this article:
iCloud: Change your iCloud password
Thank you for using Apple Support Communities.
Take care,
Sterling -
Report to find out for list of users for whom we have changed the password
Dear Friends,
Is there any way to find out the list of users for whom the passwords have been changed. We have standalone EP server built on 7.0 with Stack 08.
Best Regards
Sita RamHi Sita Ram,
here is the
public void doProcessBeforeOutput() throws PageException {
IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
IPortalComponentResponse response = (IPortalComponentResponse) this.getResponse();
Form myForm = this.getForm(); // get the form from DynPage
IUserFactory userFact = UMFactory.getUserFactory();
try {
IUserSearchFilter groupFilt = userFact.getUserSearchFilter();
groupFilt.setSearchAttribute(
"com.sap.security.core.usermanagement",
"uniquename",
ISearchAttribute.LIKE_OPERATOR,
false);
ISearchResult result = userFact.searchUsers(groupFilt);
List list = new LinkedList();
// Iterator currentMembers = null;
while (result.hasNext()) {
String name = (String) result.next();
list.add(name);
Collections.sort(list);
Iterator iter = list.iterator();
while (iter.hasNext()) {
IUser testUser = userFact.getUser(iter.next().toString());
IUserAccount acc[] = testUser.getUserAccounts();
String dispUser = testUser.getUniqueName();
response.write("<br>"+dispUser+"- last changed password on "+acc[0].getLastPasswordChangedDate().toLocaleString());
} catch (UMException e) {
response.write("<br>Searching failed - " + e.getLocalizedMessage());
develop the project in the NWDS and deploy it into the portal.
Regards,
Sithi -
The values for list items of other data blocks are not getting displayed when executed.
Hi,
I have a new problem again.
I am doing a new form in which there are around 8 blocks. All the blocks have their tables in the oracle database.
Each block has 18 columns with the same column & column names. But the values in those columns are different & the values do not match.
The problem lies while i execute the form, it populates only the first block data. Other blocks do not display or populate the values.
I cannot create a master relationship because all the column values are different.
How do i display or populate the values of all the tables?
Please help me. Thank You.hi
if your form has truly disassociated tables, then you could simply use a key-exeqry trigger at forms level to travel to each block in turn and perform an execute-query built-in, eventually returning to the starting block.
ie
go_block('..');
execute_query;
go_block('..');
execute_query;
etc
go_item(......);
In this case you would use the block where clause to constrain each table to the appropriate set.
If however, the database has no relationships between the tables but the data content has some corelation, then you could craft a forms relation manually.
cheers
Rod -
I want to create a document for printing and when changing the cropping area data log restart
PLE
Tom,
In addition to what Monika said, the document can be either CMYK or RGB Colr Mode, but not both.
And you are right in starting with the CMYK because that will ensure (to the degree possible) that the CMYK and RGB versions match in colour (gamut, the CMYK gamut being the more linited and almost entirely included in the RGB gamut); this will prevent more vivid RGB colours which will make the CMYK colours seem duller. -
How do you findout if the values of varables have changed in a class
Hey Hey,
I have a number of classes which contain varables. I need a way of knowing if the values of the varables have changed. so i can do a job. is there a easy way of finding this out maybe by hash or size?
ive worked out i can get a array of all the fields in the class like this
Field[] fields = cls.getDeclaredFields();Well, usually you do build support for this kind of stuff into the class itself. I usually do it by using Java's PropertyChange stuff:
import java.beans.PropertyChangeListener;
import java.beans.PropertyChangeSupport;
public class ChangeReporter {
private final PropertyChangeSupport pcs;
private int field;
public ChangeReporter() {
pcs = new PropertyChangeSupport(this);
public void setField( final int newValue ) {
if (newValue != field) {
pcs.firePropertyChange("field", field, field = newValue);
public void addPropertyChangeListener( final PropertyChangeListener pcl ) {
if (pcl != null) {
pcs.addPropertyChangeSupport(pcl);
}For additional information see the relevant API documentation. -
Mail delivery failure messages for email I have not sent to contacts I do not know.
I am receiving Mail delivery failure messages for emails I have not sent; they are addressed to contacts I've never heard of, many different. Apparently, this is some kind of spam but I don't know what to do about it.
There is nothing you can do about it. It will stop at some point.
http://en.wikipedia.org/wiki/Backscatter_%28email%29 -
"Error reading reporting point information" message no. RM111
Hello friends,
I am doing the Reporting point backflush for a material and getting the error "Error reading reporting point information", message no. RM111.
i have given the milestone confirmation for the last operation in the rate routing for that material.
Even in REM Profile, Mandatory Reporting time backflush is activated.
In the production version of that material i have given the group of rate routing created for that material in Rate Routing field.
I have created the product cost collector for that material and production version. With costing lot size 1, even i have calculated the cost for that product cost collector. Though regarding costing couple of errors came, than also i saved it.
I am not sure whether system has created the reporting point while creating the product cost collector.How to check it?
Now for that material we have created the planned order.
Now when i am doing the backflush in MFBF t.c by giving the material code,plant and production version, system is throwing the error " Error reading reporting point information.
Thanks and Regards,
JitendraHello siva,
i executed the transaction MF30 as suggested by you, there system displayed following costing errors:
"No control record for Activity type PLVD/1301/ASBY in version 000 / 2010 activity planning/qty planning
Message no. KL023
Diagnosis
No activity planning or quantity planning has been carried out for Activity type PLVD/1301/ASBY in version 000 and fiscal year 2010.
Procedure
Activity Type Planning for cost centers or
Planning Quantities and Prices for business processes.
Even system is not picking the component prices, system throwing the error NO price could be determined for the material and batch so and so.
We are using the Preliminary cost estinmate.
is because of this system is not able to create reporting point in product cost collector?
Please Replay
Maybe you are looking for
-
I can't save a picture to my camera roll from an email
I emailed a picture from my MBP to myself then downloaded the email on my IPhone 4S. When I tried to open the picturethe only options I had were to email the pic, post to FB or Twitter or print it out. There used to be an option of saving th picture
-
When I send an email from Mac Mail, why does Mail go to the background and the Finder comes to the front? I want it to stay in Mail.
-
When i send to idvd, how good is the quality?
when i send my video to idvd, is it full quality then idvd compresses it or what?
-
Cant restore my ipod!!
I just downloaded the latest version of itunes but my ipod nano doesnt restore! Right now my ipod has the message "use itunes to restore". It also says my ipod is corrupted. Here the problem *I already reinstalled itunes *itunes reconigzes my ipod *H
-
Reference with '*' in GL document
Hi. I know when I create a new GL document, and I write in Reference field an '*', when document is created, in field reference appears document number created. But now, I want to do the same for a preliminary document (type FW) and it isn't working.