Information on Creating Infoset

Hi Gurus,
Please let me know, if any one has standard procedure to be followed for creating Infoset, which are used for creating Target Group.
Thanks,
Bhushan

Hi Bushan,
Follow the below steps for creating infosets
1. Goto the transaction code SQ02
2. Give the Z infoset Name in the infoset field and click on create button
3. Give the name of the infoset in the pop up screen
4. Select any one the methods
       a. table join using basis table
       b. direct read of table
       c. logical database
       d. data retrival program
5. Give the selection values for the datasource ( for example BUT000 for direct read of table)
6. Give the field selection
7. Generate the infoset
8. Save the infoset
The above saved infoset can be seen in the create datasource screen.
Hope it gives you the clarity
Reward points if it helps
Regards,
Madhu

Similar Messages

Create infoset from infoset

hi,
is it possible to create an Info set which contains data from info cube and another infoset?
case:
I have info set of CUSTOMER which contains of master data 0CUST_SALES and 0CUSTOMER
then I have a cube of sales, but the information of the SOLD to PARTY is not complete, I don't want to modify the existing cube by adding the information I need as it's too risk for newbie like me.
so the other way is to creating INFO SET that joining those two data.
is it possible?
pls adv.
thanks
Andika

Hi,
Creating Infoset and then using a multiprovider to report the data is one of teh solution.
But remember, debugging reports created on Infoset is bit tedious.
An alternative solution would be to add the 0Custsales in the cube and then use the Sold to party as navigational attribute.
Doing this will only need the cube to be reloaed once after the modification.
Regards,
Rahul

Error while creating - Infoset in SQ02

This is the error, i am getting when i am trying to create - Infoset in SQ02. Can any one help to resolve, check and generate
the infoset
Error in parameter PYSORT
Statement concluding with "...TYPE" ended unexpectedly.

You could try applying OSS note 1117474. You may want to review this note to see whether it fts your case..
Hope this helps.

Third party tool which can create infosets in SAP R/3

Hi All, Is there any third party tool that could create infosets in ECC for reporting.We integrated crystal reports with ECC and want to create queries using infosets and make use of BAPI's. There are several 100's of reports to be developed and we are afraid we might make mistakes when we have to join all the tables in ECC during infoset creation. We are hoping to find a third party tool that could do this or has infosets that could be used.

Hi Aparna,
Go thru the link which may be useful
http://www.datamanagementgroup.com/resources/articles/Article_Top10ReportingToolEssentialsForSAPR3.asp
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1252145,00.html#
http://www.abapcode.info/2008/05/how-to-generate-query-report-example.html
Rgds,
Suman

How to create Infoset&user group query--(query report)

Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .G

goto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu

How to create infoset (pls urgent)

Hi.. frdz
For reports like employee MD, Applicant MD I have to create infoset, hence I request fridz let me know how to create infoset and generation of reports thorough the infoset.
Awaiting for ur favorable reply.
Points would be awarded for answers.
$Lakshmi

Dear Naveen,
Continuation this point...... i would like to know can we change the layout
which we obtain through abap query.. Actually i have a requirement where
i have to do the report in the abap query........now the client say he dont want
the output which i have got through abap query.......first ihave shown him
the ALV report , next i have shown him through ABAP list......but they wants the report in their own format.which they are using in lotus notes till now.......... Please let me know can i change the report which has been generated through Infoset.......and give him in their own LAYOUT........do we have any
option .......or we have to change the STANDARD code generated by the abap query.
tell me is it possible to change the layout and give in their format.....if you any body know please let me know......
Please let me know.
regards
vamsi ravi

Contact your help desk with this information: cannot create connection file "CitrixID"

Has anyone overcome an issue with logging in to a Citrix server and getting the following message: Contact your help desk with this information: cannot create connection file “CitrixID”? I can log on, but once logged in, the apps available to me will not launch. All worked fine before I upgraded to OS X Mavericks. I do a lot of foreign travel and Citrix kept me connected to the office. Unfortunately, our IT team aren't really "Mac Guys" so they are just as perplexed as I am. I have deleted and deleted Citrix Receiver several times as posts on other sites recommended, but to no avail.

There are some discussions on the citrix forum that may help if you haven't already seen them. Here are two and there are likely more:
http://discussions.citrix.com/topic/325359-reciever-117-cannot-write-connection- file-usersnamelibraryapplication-supportcitrix-receivermodules/
http://discussions.citrix.com/topic/302900-reciever-1143-cannot-write-connection -file-userschristinalibraryapplication-supportcitrix-receivermodules-error-numbe r-30/

Create infoset - sq02

Hi all,
I want to create infoset in sq02 with 3 tables.
and want to add some condition and put their value default.
Is this possible ?
I also tried it with external program, but i get error.
Plz help me how to do it.
thanks in advance.

Yes ,it is possible to add code in infoset.
open sq02 give infoset name click change,in app tool bar click on extras
there on right side you have option code.you can write your code there.

How to doc on Creating Infoset Qry on BW 3.5

Hi Friends,
Can someone rell me where I can find "How to doc on Creating Infoset Qry on BW 3.5", I have to create one, but I got stuck at one point.
Thanks alot in advance,

Psycho
Have you seen this link??
http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/cb43b2455611d189710000e8322d00/frameset.htm
Hope this helps
Thnaks
Sat

Creating infoset

hi frnds,
i have to create infoset in r/3 side can anybody say me step by step scenario

You need to create it in Tcode SQ01.
http://help.sap.com/saphelp_47x200/helpdata/en/20/a14f560f2a11d6999200508b6b8b11/frameset.htm

Error while creating Infoset Creation

Hi All,
I've created an infoset using a program and data structure. But while generating the infoset this below mesg was getting as error:
Generation Error-->
Data Retrival Program-->
Commentary <Query_head> or <Query_body> is missing.
Please guide me with this error.
Thnks & Rgds,
Ravi

no answer.

Creating Infoset query based on ABAP program

Hello
I have 3 tables FEBEP, BKPF and BSEG and I need to join the 3 tables based on:
FEBEP-MANDT = BKPF-MANDT = BSEG-MANDT
FEBEP-NBBLN = BKPF-BELNR = BSEG-AUGBL
FEBEP-GJAHR = BKPF-GJAHR = BSEG-GJAHR
Then I have a few view fields from all the 3 tables. After this I can build an infoset query based on structure + ABAP program, and a generic datasource on top of it.
Can someone give me the ABAP code to be written SE38? Also should I select integrated program/external program in the infoset query?
Thanks,
Srini.

Hi,
Even if you create an ABAP program for infoset, you will writing a SELECT statement from BSEG table which is quite huge.
And you will putting JOIN with other tables.
Performance wise this is not advisble.
Why do not try the following other tables and check if the fields you need are available?
You can't join BSEG as it is a Cluster Table.In the place of BSEG you can use:
Account Recivables data use BSID and BSAD tables
GL Account Related data use BSIS and BSAS tables
Account payables data use BSIK and BSAK tables
Thanks.

How do we get around the billing information for creating an Apple ID?

Have student accounts that do not have credit cards. How can we create an Apple ID without a credit card?

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
If None is not available - On your computer launch iTunes and click “iTunes Store” in the left navigation pane. Click the “down arrow” next to your name at the top right side of the page and click “Account.” Enter your username and password and click “View Account” to log into your account information. Next to your Payment Type, click “Edit.” Select the “None” button and click “Done.” Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
 Cheers, Tom

3 people have been using the same Apple ID for years. How do we separate the information and create our own Apple IDs?

Brand new to the community. I'm confused as to how all of this works, but since we're using the same Apple ID, we seem to be getting eachother's information synced to our phones including contacts, music, etc. I'd like to separate our accounts, but how do we retain the appropriate information for each individual?

On person can keep the current account and the other two can migrate their devices to new accounts. To migrate a device to a new accoun, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; the person keeping the current account will not be effected by this), provide the password to turn off Find My iDevice and choose Keep on My iDevice when prompted . Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data. If the same person has other devices to migrate to this new account, on the other devices they can save the photo stream photos to the camera roll, delete the iCloud account, choose Delete from My iDevice (since the data is already in the new account), the sign into the new account.
Once you are all on separate accounts, you can go to icloud.com and delete any data that you don't want in your accounts (such as other people's contacts).
If you're getting each other's music it may be because you have automatic download turned on, which automatically downloads purchases made any other device signed into the same iTunes ID. To prevent this, go to Settings>iTunes & App Store and turn Music off under Automatic Downloads.

Missing Account information when creating Planned Activity in Account

Hi Expert,
When creating planned activity in Account inwebUI, I am expecting that the Account information would be populated in the Account field of a planned activity but it is not. Could you please tell me if this is a SAP standard? Thanks

Check Partner Determination Procedure of Activity Transaction
regard,
vijay.

Information on Creating Infoset

Similar Messages

Maybe you are looking for