Information on enabled services and which ones I can safely disable

Where is a good source of infomation for all of the enabled services (what they do, etc) and which ones I can safely disable. i.e. seaport.

Opt back in and then immediately back out (yes I know this sounds daft)
Leave you hub on 24/7 and it should deactivate as said with in 48 hours.
Don't reset the hub after doing this, as it always puts BTWifi back on!
fwiw, you should see this on the hub event log as the hub gets the btwifi disabled update
10:40:51, 01 Feb.    (33980.780000) CWMP: session completed successfully
10:40:45, 01 Feb.    (33974.620000) CWMP: Set Parameter by TR069 Success
10:40:45, 01 Feb.    (33974.620000) BT WiFi disabled via TR69
10:40:44, 01 Feb.    (33974.070000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
-+-No longer a forum member-+-

Similar Messages

  • Why the duplicate Applications folders and which one(s) can I trash?

    I've tried to disregard the duplicate Applications folders on my HD and double Mail programs in my dock but would like to trash any I don't need (I'm the only user of my machine). I see that there's an Applications folder in my HD icon (under "Devices"); an Applications folder in my Finder window (under "Places"), and an Applications folder accessible by clicking on my name in the Finder window (also under "Places"). Although it appears there are 3 Applications folders / Mail programs, a search in Finder suggests there are actually 2: one is traceable to HD (hard disk); the other is traceable to my name. Which of these is "safe" to trash? (I don't understand why my Finder must contain two Applications folders--frequently resulting in the appearance of duplicate Mail programs in my dock. Any clarification/suggestions appreciated. Cap

    Thanks. That helps me with the concept, and I see that there can only be one "real" Applications folder which is under Devices and labeled Macintosh HD. Perhaps what I'm trying to say is that the below that, in the Places area, the programs in the "Applications" of my "Home Folder" (the little house followed by my name) don't agree with the programs in the "Applications" folder right underneath it. The latter Applications Folder agrees with the one on my Hard Drive, it has the new iTunes program, etc. whereas the programs in the Applications Folder of my Home Folder are different (the old iTunes program, etc.). I guess I'm saying that the Applications Folders of my Hard Drive and of my Home Folder are at odds. I'm simply going to try following your idea--drag the Applications Folder from my Home Folder onto the desktop, replace it with the Applications Folder from my Hard Drive, then go through the eternity of trashing the old Home Folder Applications Folder
    that will by now be copied on my Desktop. (Wish I new of a faster way of trashing the many programs.) I'll let you know if it works. Thanks again, Cap

  • SharePoint Databases - How to determine which ones are being used and which ones aren't

    I am not sure where to exactly post this question.  On the SQL Server side or on a SharePoint side.
    I am a SQL Server Database Administrator who is monitoring some SharePoint databases.  On a daily basis it seems that they are creating new databases but don't delete the databases that they are no longer using.  For example, they might be testing
    on a development server and if things aren't working properly instead of asking that the databases be deleted they just go ahead and create new databases to do what ever they need to do.  Is there a way on the SQL Server side to determine which SharePoint
    databases are being used and which ones aren't being used?  Or does one determine this information through the SharePoint Central Administration console?
    lcerni

    Hello,
    The following query gives you the databases now in use.
    SELECT
    DISTINCT d.name
    FROM
    sys.dm_tran_locks
    tl INNER
    JOIN sys.databases
    d
    ON
    tl.resource_database_id
    = d.database_id
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How the process starts in XI and which one should start first ?

    How the process starts in XI and which one should start first ?

    XI flow :
    1.File picked by the adapter,at the A.E it converts to XML format.
    2.Generate a msg ID for the file and creates XI header to that file  using CPA cache. CPA cache will be having the    information about all the Control(address) data.
    3.Module processor
    4.The file goes to send queue by the adapter engine, that file will be  picked by the internal XI adapter and the file    will be forwarded to the Integration engine.
    5.Pipeline steps follow the Integration Engine.
      Receiver determination, Interface determination, Msg split, Msg  mapping, Logical routing, Receiver aggrement, call adapter
    6.The file will go to receive queue, which was taken and forwarded to the adapter engine.

  • Why do I have two versions of lightroom on my desktop and which one should I delete/uninstall

    Why do I have two versions of lightroom on my desktop and which one should I delete/uninstall?

    Hi,
    Lightroom 5.x and CC will be installed side by side. You may uninstall the prior version one you’re comfortable in the new version of Lightroom.
    Lightroom CC/Camera Raw FAQ
    Regards,
    Sumit Singh

  • Properties that are updateable and which ones not using epma batch client

    Can anyone provide list of properties (HFM/Essbase etc.) that are updateable and which ones not using epma batch client?

    This will be documented in the batch client and related documentation on the EPM documentation portal

  • I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

    Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

    I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
    But the answer is that it doesn't really matter - just make certain to get 1333MHz.
    Good luck,
    Clinton
    MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Want to buy airport extreme, am using mountain lion.  Will this work ?  also,  my house is 5,500 square feet all on one floor.  Do I need an extender and which one?

    want to buy airport extreme, am using mountain lion.  Will this work ?  also,  my house is 5,500 square feet all on one floor.  Do I need an extender and which one?

    ...  If I purchase an express to extend is it hard to configure as an extender? 
    No, AirPort Utility prompts you with step-by-step questions and makes configuration simple.
    The Express and Extreme have the same transmitter power specifications, so I suggest the $99 Express as an extender, should you need one. Beware that you cannot add a second Express to wirelessly extend the network any further - as the following excerpt from Extending the range of your wireless network by adding additional Wi-Fi base stations explains:
    Extended network range considerations
    In the above example the primary Wi-Fi base station ➊ is out of wireless range of the extended Wi-Fi base station ➋, therefore the extended Wi-Fi base station cannot join or extend the wireless network. The extended Wi-Fi base station must be moved to a location that is within Wi-Fi range of the primary Wi-Fi base station.
    Important Note
    If another extended Wi-Fi base station ➋ is placed between the primary Wi-Fi base station ➊ and the extended Wi-Fi base station ➌, the extended Wi-Fi base station ➌ will not allow clients to join it. All extended Wi-Fi base stations must be in direct range of the primary Wi-Fi base station.
    A "roaming network" that Bob described, in which all base stations are connected with an Ethernet cable, is by far the best alternative.

  • Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???  And which one to install first developer suite or database????

    Hello everyone,
    I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
    Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
    IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
    And which one to install first developer suite or database????
    Thanks in advance.

    you should check (before installing) requeriments from documentation.
    Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
    Table 4 Memory Requirements for Oracle Developer Suite Components
    Component
    Memory
    Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
    Minimum: 256 MB
    Recommended: 512 MB
    Oracle Reports Developer
    Minimum: 128 MB
    Recommended: 256 MB
    Oracle Forms Developer
    Minimum: 128 MB
    Recommended: 256 MB
    I usually install first database and later DS, I never tried first DS and later database.

  • I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

    I have got a lot of apps, which are not installed on any of my iDevices anymore. is there a possibility to remove all those apps from iTunes without searching which ones are, and which ones aren't installed on one of my iDevices?

    Assuming all the device(s) have been synced to this computer as its Home computer. The easiest way would be to delete all the apps from iTunes. After which connect your device(s) to the computer (iTunes) and transfer purchases from the device(s) by right click (control click) the device name in the left sidebar and the click transfer purchases. When done only the apps on your device(s) will be in you iTunes library.
    Hope that helps

  • Why are there 2 'after effects', 14 and regular and which one is the best use? It seems a little crazy to use twice the storeage for the same program?

    I up graded adobe cc last night and the cc app down loaded up-grades to my original cc apps, plus another app of each labeled 14. Why do we need two copies of the same app on our machines, and which one is the best to use. I hope adobe in not going down the same road as apple and screwing up the works. i still remember way back when adobe goofed it so bad I switched to final cut. Now apple has screwed up final cut and I am back to Premiere. I know we have huge drives now, but come on, why two bit eating monsters that do the same thing. Stan / Desert Wind Productions.

    The "2014" versions are new versions of the software. It's like the difference between CS5 and CS6. The new one is (most of the time) significantly better. This isn't any weird screwup, it's just a new version.
    You may want to keep the old version around for compatibility, client needs, safety, etc. However, it probably behooves you to use the current version for all of its new features, etc.

  • HT1535 I have "Camera roll" and "Photo Stream" - effectively storing my photo's twice - how do I delete and which one do I delete?

    I have "Camera roll" and "Photo Stream" - effectively storing my photo's twice - how do I delete and which one do I delete?

    your photos are in events -
    the most common cause of not seeing the events is bad camera dates or event sort being wrong so you are looking in the wrong place - see the view menu ==> sort events to correct sort - if the camera date is off select a photo and right click and show event to find it - then use the adjust time and date command to correct it
    and you can drag photos to the desktop - what happens when you do? probably a better work flow with more flexibility is to select the photo(c) and export them (file menu ==> expoprt) to a desktop folder
    LN

  • Which one goes in the front and which one goes in the back? (4.1)

    Long long time ago, (well around 999) I purchased this set of speakers from Creative. I believe it was something like Cambridge something. It was the first introduction of Surround Sound Speakers and it was a 4.1. (2 front speakers, 2 rear speakers and subwofer).
    When I moved to USA, I brought them with me (and I still use them), but I lost the box and the manuals. I hook it up with the X-fi and works beautiful.
    My question is:
    I remember reading that two speakers had some difference (something connected with the distance I think) with the other two. Something like 3 meters and 5 meters.
    Is that connected with which one goes in the front, and which one goes in the back?
    Right now; the speakers in the front are really strong, but the ones in the back, are very soft. Is that right? Or should I swap them?
    Thanks
    Max

    There are dozens of 1TB drives that will 'fit' - just make sure that they're 2.5" drives, 9.5mm 'thick'.
    I don't like Western Digital but there are plenty of other brands out there.
    I would recommend shopping at Crucial or OWC for both your new drive and RAM.
    Clinton

  • Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.

    Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.
    I get above message when I click on the firefox icon.

    This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.

  • Free trial version of Illustrator - created a document - and no one else can open

    I download a Free trial version of Illustrator - created a document - and no one else can open as an illustrator file (extension .ai) and edit.  They have CS6 version 16 - it tells them that it was created in a newer version.  They are only able to open individual pages as .pdf.

    vanoevsa,
    File>Save As then choose the version in the dropdown list (CS6).

Maybe you are looking for