Information on Reporting Services needed

In searching for information on how to use the Reporting Services button in Xcelsius, I came across a few forum posts of interest:
The post [Xcelsius workgroup and reporting services: problem with export|Xcelsius workgroup and reporting services: problem with export] talks about a white paper at [http://www.bobjects.com/email_imp/partners/nl_xcelsius/aug2006/ssrs_wp_final.pdf|http://www.bobjects.com/email_imp/partners/nl_xcelsius/aug2006/ssrs_wp_final.pdf]. Is this link valid or can I find the document somewhere else? When I click on the link it just hangs.
The post [Adding Connections to SQL Server|Adding Connections to SQL Server] mentions an article about Reporting Services at [http://www.bobjects.com/email_imp/partners/nl_xcelsius/aug2006/article2.html|http://www.bobjects.com/email_imp/partners/nl_xcelsius/aug2006/article2.html]. Is this link valid or can I find the document somewhere else? Like the other, when I click on the link it just hangs.
Lastly, the post [Xcelsius SQL Server Reporting Services whitepaper example files? link broken|Xcelsius SQL Server Reporting Services whitepaper example files? link broken] mentions example files for reporting services at [https://boc.sdn.sap.com/files/SSRS|https://boc.sdn.sap.com/files/SSRS]. This link definitely does not work. Does anyone know where these files currently reside?
Thanks!
Nick

Nick,
There was one white paper regarding this... [SAP BusinessObjects for Microsoft Environments |http://download.sap.com/solutions/sapbusinessobjects/sme/xcelsius/brochures/download.epd?context=91874671A5B3A1BC5654262DA3E692144F92C1EE35CFB4754398C343E2ACB7DA5AA841EC84A89E0494D9FFB49056AF41A8544FE5A1EFAF24], this document gives pretty much the same details.
-Anil

Similar Messages

9i report services need info. on CGI and RWSERVLET

We are trying to use the reports 9i against forms 6i. I need to info. on how we can differentiate the two types of service(whether it is CGI or rwservlet).
Setup1:
1. Run rwserver -install server=TESTCGI
2. This creates the service and the testcgi.conf file
3. Make the compatibility to 6i in rwservlet.properties
4. In tnsnames specify the host=host1 port=1949
(Is this that all that I need to CGI?)
Setup2:
1. Run rwserver -install server=TESTSERVLET
2. This creates the service and the testservlet.conf file
3. Make the service manual so that it doesn't startup on its own.
4. Make the compatibility to 6i in rwservlet.properties
5. Also specify server_name=TESTSERVLET
6. Now start the service by typing http://host:8888/reports/rwservlet
(This sometimes start the service(I can see an icon) and is this the CGI service that is started by the servlet??. Sometimes it can't start the service giving port binding error. If I start the service TESTSERVLET by going to the services window and type the url http://host:8888/reports/rwservlet/showenv works fine.
I don't get any port bind error.
7. Is this case also do I need a tnsnames entry? If so what should be the port?
8. Is servlet internally calls CGI and is this how it works?
9. Why is that it can't start the service automatically when started using servlet sometimes?
I am little confused about both the architecture..Any help will be appreciated.

See comments in line:
1. Is report server and the listener(the one usually on
port 1949) are different processes altogether?9i Reports Server will start up a proxy server in a separate process, if
<compatible version="6i"/>
is set in server config file <server_name>.conf. The proxy server, which is running in a different process, will listen on the port.
2. If I issue the command, rwserver server=TESTSERVER(I
have no tnsnames entry for this server at this moment
in the tnsnames.ora file in the 9iR2 home) does it
start the report server alone? or the report server and
the listener process? rwserver server=TESTSERVER will start 9i TESTSERVER, but only start the proxy server if <compatible version="6i"/> is set. In the case that <compatible version="6i"/> is set, but no tnsnames entry for this server, the proxy will not be able to start, because it does not no which port to listen to.
3. If the above command starts the listener process by
itself which port does it use? (We had the option to
specify the port in previous releases, but not anymore
I guess. It used to be something like <executable>
port=<portno> in previous releases)Again, the port is defined in tnsnames.ora.
4. I assumed that specifying the entry for the report
server in the tnsnames.ora before starting the server
would start the listener process in the appropriate
port.
a. I made an entry in tnsnames.ora as SUPPORTSERVER
port=1949.
b. I ran the command rwserver server=SUPPORTSERVER
c. Did a netstat -a on the machine. Didn't see any
process listening on port 1949.
So my question is how do we specify the listening port?
where do we specify the listening port? If in
tnsnames.ora why I didn't see any listener process on
1949?Specifying the port in tnsnames.ora itself will not start the proxy server, you will need to uncomment <compatible version="6i"/> in $OH/reports/conf/<server_name>.conf. So make sure this and port number are both set correctly.
5. How do I determine what client Iam using? Is it like
below:
a. If I use only the following url
http://<web_server>.<domain_name>:<port>/<alias>/rwservlet?<parameters>
am I making use of servlet/oc4j? Does this mean servlet
has to be used only as a url?Yes, you are running report using Reports servelt. A servlet in its nature needs to be invoked in a web environment.
b. If I use the following url
http://<web_server>.<domain_name>:<port>/<alias>/rwcgi.exe?<parameters>
am I making use of cgi? Does this mean the cgi has to
be used only as a url?Yes, you are running report using CGI. A cgi program in its nature needs to be invoked in a web environment.
However, you don't have to run them from url. You can have your own program call Reports servlet/cgi, then return the result.
c. If for RUN_REPORT_OBJECT it uses ZRC, am I not using
servlet/oc4j? Since the document says, the servlet is
more stable than CGI, I want to use the servlet/oc4j.
Does this mean I should use only the above url and not
the RUN_REPORT_OBJECT?RUN_REPORT_OBJECT will not go through servlet. You can use show_document call to send request to servlet.
Hope this helps,
-Jeff

Xcelsius and Reporting Services issue

Hi,
I'm having problems with the integration of xcelsius and Reporting Services.
i need to install in the server the XRS (xcelsius Reporting Services) correct? I also need to change the Web.config to tell the XRS the location of the reports?
After the installation of the XRS what do i need to config more to make it work with the reporting services?
Can the XRS extract information of Reporting Services Store Procedures?
thns in advance,
Hugo

Hi Hugo,
Sorry for the delay. Please refer below link to get the dashboard reporting services insatallation guide. You can find installation and post installation steps here.
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_dashD_gateway_install_en.pdf
Regards,
Nikhil Joy

Authentication of users by Reporting Services

I am working with a web application that has no user/password (login credentials) required. Users are able to fill out a survey and then see a pdf report of their information using Reporting Services. Programmatically, I was unable to just hit the
Reporting Services endpoint in order to generate the reports because ReportServer requires a user/login My understanding is that post 2008 there is no anonymous authentication allowed.
The workaround I used was to access report server programmatically and pass some credentials via the ReportViewer > ServerReport > ReportServerCredentials property. This required a lot more code than just accessing the ReportServer endpoint and
downloading the resultant pdf report to the browser. Is there another technique/option that I could have used?
Thanks and regards,
Nathan

Hi Nathan,
Based on my understanding, when accessing report server, you don’t want credential entry pops up?
In Reporting Services, after installing a new report server, only users who are members of the Local Administrators group have permissions to access report server. If we want to grant permissions for other users to access report server, we should add users
to an item-level role and system-level role. As we tested in our environment, there is no credential entry pops up when a user try to access report server. So in your scenario, please check if the user meet one of these two conditions. For more information,
please refer to this article:
Grant User Access to a Report Server (Report Manager).
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Metrics for Report services not working

Hi,
Oracle forms and reports - 11.1.2.1
In OEM when check finished jobs, i am not able to view the finished job details.
Error
Metrics are currently unavailable.
The EM Agent is down or not responding to metric query requests.
IOException in sending Request :: Connection refused: connect
oracle.sysman.emas.sdk.model.metric.MetricsUnavailableException
at oracle.sysman.emas.sdk.model.metric.AgentMetricProvider.getMetrics(AgentMetricProvider.java:135)
at oracle.sysman.emas.sdk.model.metric.MetricUtil.getMetrics(MetricUtil.java:506)
at oracle.sysman.emai.model.reports.FinishedJobsModel.initFinishedJobInfos(FinishedJobsModel.java:73)
at oracle.sysman.emai.model.reports.FinishedJobsModel.initializeData(FinishedJobsModel.java:49)
at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.initOrResetEMObject(ModelUtil.java:319)
at oracle.sysman.core.model.util.ModelUtil$EMObjectResetter.access$000(ModelUtil.java:280)
at oracle.sysman.core.model.util.ModelUtil.initializeMBEMObjects(ModelUtil.java:231)
at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:128)
at oracle.sysman.core.model.util.ModelUtil.initializeAllEMObjects(ModelUtil.java:101)
at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPrePrepareModel(EMPagePhaseListener.java:867)
at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.beforePhase(EMPagePhaseListener.java:795)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:191)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$400(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:238)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$4.after(ADFPhaseListener.java:358)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:75)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:472)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused by: oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection refused: connect
at oracle.sysman.emSDK.emd.comm.EMDClient.getStreamResponseForRequest(EMDClient.java:2675)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:2528)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:2466)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:2411)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:2368)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:1132)
at oracle.sysman.emas.sdk.model.metric.AgentMetricProvider.query(AgentMetricProvider.java:292)
at oracle.sysman.emas.sdk.model.metric.AgentMetricProvider.getMetrics(AgentMetricProvider.java:120)
... 75 more
Then i check error "Agent Unreachable" on top of the report service.
Then i checked EM agent status using command
emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
Then i tried to start the Agent using command
emctl start agent
again i provided emctl status agent, still agent is not running.
Please help me out to start the agent and view metrics information for report service.
Thank You...

Certificates have nothing to do with MSAD.
when you reach to "MSAD user configuration" tab in Shared Services, try to see if you can auto configure user by inputting: sAMAccountNmae="some user ID", replace some user ID with your or admin ID, and verify if you can pull the users from the MSAD.

Deconstructing Reporting Services

What is
Deconstructing Reporting Services?
Every SSRS course content having this topic. What that means.
Can any one please explain about this topic. Expecting reply as early as possible.
Thanks,
Dathy

Hi Dathy,
Reporting Services is a server-based reporting platform that provides comprehensive reporting functionality for a variety of data sources. SSRS enables users to quickly and easily generate reports from Microsoft SQL Server databases. The SSRS service provides
a unique interface into Microsoft Visual Studio so that developers as well as SQL administrators can connect to SQL databases and use SSRS tools to format SQL reports in many complex ways. SSRS also provides a 'Report Builder' tool for less technical IT workers
to format SQL reports of lesser complexity.
Administered via a web interface, it can be used to prepare and deliver a variety of interactive and printed reports. According to deconstructing Reporting Services, we can easily understand how a report retrieve data, process data and render report.
For more information about Reporting Services, please refer to the following documents:
http://technet.microsoft.com/en-us/library/ms159106.aspx
http://technet.microsoft.com/en-us/library/bb630404.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Forrester Report on Information-as-a-Service - BEA Systems Leads

Forrester has published a report on Information-as-a-Service which included AquaLogic Data Services Platform. The sub-title reads "BEA System Leads, With IBM, Oracle, And Red Hat Following Closely". The complete report is available for purchase from Forrester, you can read an excerpt at :
http://www.forrester.com/Research/Document/Excerpt/0,7211,43199,00.html
Edited by mreiche at 01/25/2008 10:10 AM
Edited by mreiche at 01/25/2008 10:10 AM

Make sure you edit the registry entry for the service to run as -server, not -client . Also, I cannot see what you have on some of the right side of the error but it looks like it may be a config.xml issue but you say the script starts the admin fine so I doubt it is a hosed config.xml. Check your regsitry parameters and then if still a problem then make sure you post the format so we can see all of the error. I got the service running in 10.3, it is not as easy as previous versions but it is doable and I can assist further if need be.

Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
Sharepoint on the WFE servers.
The question is, do we need to have SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
Thanks in advance,
Rich

Hello there,
The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
Regards,
Edward
Edward Zhu
TechNet Community Support

Need information on Reports execution Log..

Hi All,
Need help regarding SAP Report execution log. Here Client wants to develop a report, which displays the information about reports Usage (ABAP Report, ABAP Query and Report Painter).
The report requires the following information.
1. Users who has run the report
2. T-codes of reports
3. Type of report (ABAP Report, ABAP Query and Report Painter)
4. Run times for each instance that the report was run
5. Dates for each instance that the report was run.
Requesting to share the information about the tables or function modules, where I can get the data.
Thanks in advance.
Chanda.

Hi Chanda,
The log can be seen using STAT transaction.
TXN:STAT
Give the date: The required date.
Read Time: 23:59:59
Start Time: 00:00:00 (or ur required time)
User: username/      * (for all users)
Transaction: SE38/      * (For all transactions)
Program:      ztest/
In tools option:
You have further options:
there
Wait time for collection of data (via RFC): 99999
Maximum runtime: 23:59:59
And Execute.
It displays a log of all the details required.
There are few sample programs in this link. Also check out them:
http://www.kabai.com/abaps/q.htm
Programs: 072, 065, 021, 015, 012
http://www.kabai.com/abaps/z72.htm
Best Regards,
Anjali

What all things I need to install for Report Services?

I just want to use Oracle 9IAS Release 2 for Reports purpose.Along with RDF reports I nee to use the report service for JSP reports also.
So just I want to know what all things I need to install from Oracle 9IAS CD?
Any suggestion.........

2ManyDogs wrote:Read the Beginners' Guide.
+1
I've used Linux for several years, but only recently installed Arch for the first time. I installed Bridge Linux, Chakra, and later ArchBang, and after getting a feel for pacman (I think it's great!) and, with Bridge and ArchBang, the Arch repos, I was convinced that I wanted to go ahead with an Arch installation. Not sure if this is an option for you or not, but I actually tried two "test" installations on a spare computer first, taking detailed notes, with tabs in my browser (on another computer) opened to the Beginners' Guide and the "official" Installation Guide. I also kept the Bridge and ArchBang installations; kinda nice to be able to take a look at them sometimes to see how things are set up there. I don't know if Arch users would recommend this type of approach, but it has worked out well here.

Need clear steps for doing performance tuning on SQL Server 2008 R2 (DB Engine, Reporting Services and Integration Services)

We have to inverstigate about a reporting solution where things are getting slow (may be material, database design, network matters).
I have red a lot in MSDN and some books about performance tuning on SQL Server 2008 R2 (or other) but frankly, I feel a little lost in all that stuff
I'am looking for practical steps in order to do the tuning. Someone had like a recipe for that : a success story...
My (brain storm) Methodology should follow these steps:
Resource bottlenecks: CPU, memory, and I/O bottlenecks
tempdb bottlenecks
A slow-running user query : Missing indexes, statistics,...
Use performance counters : there are many, can one give us the list of the most important
how to do fine tuning about SQL Server configuration
SSRS, SSIS configuration ?
And do the recommandations.
Thanks
"there is no Royal Road to Mathematics, in other words, that I have only a very small head and must live with it..."
Edsger W. Dijkstra

Hello,
There is no clear defined step which can be categorized as step by step to performance tuning.Your first goal is to find out cause or drill down to factor causing slowness of SQL server it can be poorly written query ,missing indexes,outdated stats.RAM crunch
CPU crunch so on and so forth.
I generally refer to below doc for SQL server tuning
http://technet.microsoft.com/en-us/library/dd672789(v=sql.100).aspx
For SSIS tuning i refer below doc.
http://technet.microsoft.com/library/Cc966529#ECAA
http://msdn.microsoft.com/en-us/library/ms137622(v=sql.105).aspx
When I face issue i generally look at wait stats ,wait stats give you idea about on what resource query was waiting.
--By Jonathan KehayiasSELECT TOP 10
wait_type ,
max_wait_time_ms wait_time_ms ,
signal_wait_time_ms ,
wait_time_ms - signal_wait_time_ms AS resource_wait_time_ms ,
100.0 * wait_time_ms / SUM(wait_time_ms) OVER ( )
AS percent_total_waits ,
100.0 * signal_wait_time_ms / SUM(signal_wait_time_ms) OVER ( )
AS percent_total_signal_waits ,
100.0 * ( wait_time_ms - signal_wait_time_ms )
/ SUM(wait_time_ms) OVER ( ) AS percent_total_resource_waits
FROM sys.dm_os_wait_stats
WHERE wait_time_ms > 0 -- remove zero wait_time
AND wait_type NOT IN -- filter out additional irrelevant waits
( 'SLEEP_TASK', 'BROKER_TASK_STOP', 'BROKER_TO_FLUSH',
'SQLTRACE_BUFFER_FLUSH','CLR_AUTO_EVENT', 'CLR_MANUAL_EVENT',
'LAZYWRITER_SLEEP', 'SLEEP_SYSTEMTASK', 'SLEEP_BPOOL_FLUSH',
'BROKER_EVENTHANDLER', 'XE_DISPATCHER_WAIT', 'FT_IFTSHC_MUTEX',
'CHECKPOINT_QUEUE', 'FT_IFTS_SCHEDULER_IDLE_WAIT',
'BROKER_TRANSMITTER', 'FT_IFTSHC_MUTEX', 'KSOURCE_WAKEUP',
'LAZYWRITER_SLEEP', 'LOGMGR_QUEUE', 'ONDEMAND_TASK_QUEUE',
'REQUEST_FOR_DEADLOCK_SEARCH', 'XE_TIMER_EVENT', 'BAD_PAGE_PROCESS',
'DBMIRROR_EVENTS_QUEUE', 'BROKER_RECEIVE_WAITFOR',
'PREEMPTIVE_OS_GETPROCADDRESS', 'PREEMPTIVE_OS_AUTHENTICATIONOPS',
'WAITFOR', 'DISPATCHER_QUEUE_SEMAPHORE', 'XE_DISPATCHER_JOIN',
'RESOURCE_QUEUE' )
ORDER BY wait_time_ms DESC
use below link to analyze wait stats
http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/
HTH
PS: for reporting services you can post in SSRS forum
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Trigger a SQL Reporting Service Data Alert when a SharePoint List is updated & need to pass parameters to report

We have been able to get a SSRS Data Alert to trigger a report to be emailed whenever an item is added to a specific SharePoint List. The report can accept parameters but would like to be able to pass parameters that are used in the report.
Is this possible? (I cross posted over at SharePoint dev. and was referred here)
Thanks
Νικοσ Γιαννιοσ

Hi Nikos,
Based on my understanding, you have deploy a parameter report to SharePoint site, then you have created a data alter for this report. Then you want to pass parameters to report then send alter, right?
In Reporting Services, if the report has parameters, we should select values for the parameter, after report display, we can create a new data alter. Otherwise, the New Data Alter button is grayed out in the drop-down list of the Action button. So that the
rule is created based on the filtered report. Please refer to below screenshot:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

No dsn is present in the configuration file in the reporting services 2008

HI i have found this error in the log file of my reporting services ,
when i comes to the Configuration file in that
my DSN path is empty no input code is there in that DSN tags
<DSN>
<DSN/>
it shows the empty tags,
and my Current Report Server Report Credentials are Windows,Service account credentails
will it take the problem or what
We have repair the BIDS setup also still not able to solve my issue.
once this is resolved now able to send the emails using subscriptions.
pls infom abut this , i have sufferd this problem last 20 days.
Please update the above query with high priority
TanQ

Hi Ychinnari,
According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
DSN specify the database server that hosts the report server database connection string. The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
On the Database page, click Change Database.
We can create a new report server database or select an existing database, then click Next.
Connect to the instance of the Database Engine that you will use to create and host the report server database.
Specify properties used to create the database.
Specify the credentials used by the report server to connect to the report server database.
Review the information on the Summary page to verify the settings are correct, and then click Next.
Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
For detail information about Configure a Report Server Database Connection, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Upgrade 2010 to 2013 with SQL Reporting Services

I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David Jenkins

Hi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Information on Reporting Services needed

Similar Messages

Maybe you are looking for