Information/Properties for Premiere project

Hi..
Premiere Pro CS5 Production Suite
iMac
I've just completed a short film in Premiere and sent it to Encore via Dynamic Link, and has all gone to plan ending in a successful DVD being burned.
However, I need to find out some information about the project.
This is :
Format and Codec
File Size
Data Rate
Frame Rate
Frame Size
I am fine with Frame Rate and Size. The format I know is PAL, but because I have sent this via Dynamic Link there doesn't seem to be a codec for it.
My file size is 770KB (as it is essentially borrowing the media from my files) but is there a total file size including these?
How can I find out what the Average Data Rate is? I have looked but can't seem to find anything?
This information is easy to find when a sequence has been exported to another format, but I am unable to find this either in Premiere or Encore.
Any help would be greatly appreciated.
Thanks
Andy

The Data Rate in Encore shows up as 8,192KB/sec, however I have just selected my sequence in Premiere and clicked File>Get Properties for>Selection, which brings up a number of windows showing the properties for each asset. I thought that maybe there would be a data rate for the finished movie, if not in Premiere, then in Encore.
What do you mean by the datarate in Encore?
The datarate of the movie on disk is what Harm indicated, the datarate of the vob. (In gspot or mediainfo, you can get the video and audio datarates.)
There is no finished movie in Premiere. There is only your source, and then, the "finished movie" on disk (and see below re Encore's work files).
As you may have seen, there is more than one vob that includes your movie, so no single source there.
Part of the point here is that your search for the "finished movie" may not be the single file you imagined. And adding things up may or may not be meaningful - are you looking for what the storage needs are?
Encore saves all its transcoded assets, menus, etc, in a directory structure below the encore project file itself. If you export/transcode a DVD ready file from Premiere (you are not), you will not find it in the project structure; it is found only where you exported it. When you dynamic link (or import a non-DVD-ready file), the Encore transcoded file will be in the Encore subdirectories. Unlike the vobs on disk, you will find a single file with the video (for DVD an m2v) and audio.

Similar Messages

Help with Audio for Premiere Project

Working on a lengthy project and need some help with audio which is not my specialty!
I am recording using a Sony EX1r and a wireless lav mic,     OK. Here is what is happening.
When I import the clip into project I get Audio from the left speaker.   If I burn a DVD and playback on home player with surround sound, I get audio out of just the left speaker which makes sense.    SO I go to Premier and use "Fill Left" which fixes the audio on my computer and get sound from left and right speakers.    The odd thing is that when I play this version back from DVD on the surround sound system, the audio now only comes from the CENTER speaker. I dont get anything out of left OR the right speaker so it sounds hollow.
I am sure I am missing something obvious so please be kind.
Is there an easy way to get my audio to come out of Left, Center, and Right speakers (and rear for that matter) ???
Thank you
Ted

Bill,
The DVD player is a Sony BluRay and the receiver is an Onkyo AV receiver HT-R380.
My thinking is that it is something that I am doing wrong inside Premiere vs something that the DVD player or receiver is doing.    My final product will need to play on a variety of DVD players so I need to get it right.
It just seems odd that my default output DVD provides sound to the left speaker but then removes it when I fill Left.
Am I setting up my audio tracks wrong? Or should I being doing something with a 5.1 track???
Thanks
Ted

Can I possibly get Premiere to work for this project?

Hi. I am working on a time lapse scanner photography project. I scan flowers a few times an hour and then make videos of them drying out. I'm currently making a movie of it all. The thing is, the scans can be thousands of pixels high/wide. The problem arises when I make sequences with 20 or more of these videos (scaled down to around 10% in Premiere) moving together. It becomes almost unusable on my older Macbook Pro. Doing the more complex parts of it is also very inconvenient on a new iMac. Because I'm working with so many files, I tried out After Effects. Its proxying feature excited me, but it soon became clear that AE is meant mostly for shorter projects, and not for clips that can get 40 GB + in size. For example, in trying to make tiny proxies of clips last night, only four succeeded. It seems that the rendering is centered on your available RAM, and when it runs out (a few seconds into the first clip) rendering becomes very slow. This might work for ads or something, but not for this project. Maybe I'm not using it correctly though.
So I don't know what to do. I've tried a proxy workaround for Premiere, but that seems to involve working with clips at the resolution you made the proxy at, unlike AE where you can work with a now-more-blurry version of your main file. I tried making a tiny proxy manually, and then upscaling it in Quicktime Pro 7, but that seems to also be slow for Premiere, leading me to think that multiplying the one clip in my test sequence by 20 or more wouldn't be that different.
Does anyone have any ideas as to how do edit a project like this with a reasonably responsive UI? I don't care if I have to spend hours rendering proxies, or rendering the final copy afterwards, I just want to be able to edit without waiting for minutes when I click on a 20 layer part of the movie. I understand that this is probably an abnormal way of using Premiere, as normally one only uses a few layers at a time.
Another idea I had was to do the parts of the movie with 20+ layers in AE, and import them in Premiere to get around AE's focus on shorter lengths. But this doesn't get around the issue that its proxying feature, and rendering engine in general seems to be tailoured towards shorter projects. If you are confused, that's okay, I can elaborate more and provide pictures.
Here's some single videos from the project:
http://www.momentaryvitality.ca/
Thanks!

ATI cards will not work for GPU acceleration of the Mercury Playback Engine and only Nvidia cards with at least 1 GB or RAM and at least 96 CUDA cores will allow for a good experience when using the GPU enable Mercury Playback Engine. I have a mediocre GT 240 with 1GB of RAM and it rocks. It is much better than using the software only mode. Software only mode is not bad but GPU enabled is so much better. You will have to trust me on that. A new Macbook Pro would not be wise. In fact $900.00 Dell or HP with at least 96 CUDA cores and 1 GB of RAM would be a much better option. You could in theory get a mediocre $600.00 Quad Core from Best Buy and then buy either a $70.00 Nvidia GT 240 graphics card or even a $135.00 GTX 550 graphics card to put in the system. That would work just as well.

Premiere Pro performance suddenly slowed down to be virtually unusable, even for simple projects

I'm running latest Premiere Pro update on a late 2013, 27" iMac, with a 3.4 GHz Intel Core i5 processor with 8GB RAM, Mac osX version 10.9.5. I know that's not a lot of RAM, but up until the past week or so I was able to edit an hour-long 4K project with that configuration, as long as I ran the Premiere session at 1/8 resolution. It did drop some frames if I tried to play a long piece of it without stopping, but it was workable for editing purposes. But in the past few days, the session has slowed down to the point where it starts serious frame dropping from the moment I push play, and is basically unusable.   It also drops audio, and I can hear the drives clattering frantically as soon as I hit play.   My media is on 2-TB G-drives connected via USB3.
What I've tried so far...
- Ran diagnostics on the drives, and it found no errors.
- Tried linking the project to the identical files on the backup drive. Same problem.
- I made sure my Mac's energy saver settings were set so that the drives never go to sleep.
- I deleted all the media caches and Premiere preview files I could find.
- I reset the Spotlight privacy settings so that they do not index any external drives, and only a few folders on the internal drive.
- I made sure I'm set to devote the maximum amount of memory (6.5 GB) to Premiere.
- Finally updated my Premiere software to the latest version.
None of these things made any difference.
- Then I thought maybe the session had just gotten too big and bloated for my system to handle.   So I made a new project and imported a simplified version of just one sequence, which only references some of my color-corrected video files. That way I only have to have one external drive connected, and the session is referencing much smaller files. Still no improvement.
- So I tried an experiment where I made a brand new Premiere project and sequence. I imported just 5 video files into it. The largest file was less than 3GB. (I do Protools editing on that computer with files much bigger than that, on the same type of extermal drives, with no issues at all.) With only a single 5-second video clip (and no audio) in the timeline, it still starts dropping frames after about 2 seconds. If I put another 5-second clip in the timeline, the frame dropping gets twice as bad. If I try to put a video crossfade on them, playback gets so jerky it's unwatchable.
So basically, I started out being able to edit a 60-minute long 4K video project with video transitions and multiple tracks of audio and video. (It wasn't perfect, but it was workable.) And now suddenly, I can't play a brand new session that has 5 small video clips in it, and no audio.    So it's not just my project or sequences that are the problem. Premiere just no longer seems to be able to access and play back my media with any kind of speed.
What am I missing? Can you give me some additional suggestions to try that I haven't already mentioned above? (And yes, I know a lot of you guys probably consider my hardware setup completely insufficient for what I'm doing, and you're probably right. But it was working well enough for me up to this point. I'm so close to the end of my project, and I'm really just trying to get back to the functionality I had a week ago, so I can finish.)
I'd appreciate any suggestions. I feel like I'm running out of things to try.

After a lot of troubleshooting, it appears the problem is related to the color corrected version of my video not being able to play back fast enough. While my system had no issue with the raw 4K camera files, the increased color depth of color corrected Pro Res versions are just too much for my drives to play back in real time, even at low resolution.   Unless I want to do considerable system upgrades (which I don't), the solution is to keep my color corrected and non-color corrected video stacked on top of each other in the timeline, and to deactivate the video track containing the color corrected ones. Of course, I can turn the color corrected track on when I need to check something with it, but for playback functionality while editing, I'm limited to the raw camera files.
Obviously this is an imperfect solution. But because I'm basically done editing and just need to do some title work and a little trimming, I can finish the project working that way.
Incidentally, tech support suggested major upgrades to my memory and video cards. But if I were going to attempt to troubleshoot this further, I would upgrade to a better RAID system before I would do additional upgrades to my mac. It really feels more likely that's the primary issue here.

[svn:bz-trunk] 21285: Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project

Revision: 21285
Revision: 21285
Author:   [email protected]
Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
    blazeds/trunk/apps/ds-console/console/ConsoleManager.as

Revision: 21285
Revision: 21285
Author:   [email protected]
Date:     2011-05-20 07:53:23 -0700 (Fri, 20 May 2011)
Log Message:
Need to change _parent, privateCall and instance properties from private to protected in order to extend this class for another project
Modified Paths:
    blazeds/trunk/apps/ds-console/console/ConsoleManager.as

How can I point the premiere to a blank folder and bring only the files needed for the project

When I start premiere it loads all files from all my photo/video libraries (app 150 gb almost 20,000 photo). I do not want to sort thru all these files for a project. How can I point premiere Elements to a blank folder and get the appropriate media for a project as I
need them.

As Steve points out, there are really three programs in the Premiere and Photoshop Elements "suite," PrE, PSE and then Organizer, which links between the two, and is an Asset cataloging program. Because of the commonality of the GUI (Graphic User Interface), there can be confusion as to exactly which program one is in.
If you launch just PrE, and not Organizer (can be launched from within either PrE, or PSE), the only Assets/media that you will see is that, which you have Imported into your Project.
Also, having the Assets for a Project, in a separate folder, or folder structure, is a great way to set up the Project. This article goes into details on one set up method: http://forums.adobe.com/message/4491450#4491450
Good luck, and hope that helps,
Hunt

Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

I apologize for not being able to find this answer on my own but can anybody please answer this: Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

SusieBird
Are you using any version of Premiere Elements? Or, is it that you are really asking about some version of Premiere Pro and Audition?
If the latter, please refer to
Premiere Pro
Audition CS5.5, CS6 & CC
In the Adobe Premiere Elements Forum in which your thread has been posted, it has always been written by others (Bill Hunt, Steve Grisetti) that
Premiere Elements users can use Premiere Elements assets for commercial projects. I do not use Audition, so I cannot speak to the Audition situation.
We are a user to user forum here and not Adobe. The ultimate answers on this would be from Adobe itself to avoid what is written and what is written between
the lines.
ATR

[svn] 4521: Fix for - Override information missing for properties and methods in DITA XML output of ASDoc

Revision: 4521
Author: [email protected]
Date: 2009-01-14 06:01:28 -0800 (Wed, 14 Jan 2009)
Log Message:
Fix for - Override information missing for properties and methods in DITA XML output of ASDoc
QE Notes: None
Doc Notes: None
Bugs: SDK-18681
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18681
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi ,
I have an error like this below:
[java] Exception in thread "main" java.lang.IllegalArgumentException: and
[java] at com.sun.rave.jsfmeta.generators.Main.run(Main.java:521)
[java] at com.sun.rave.jsfmeta.generators.Main.main(Main.java:279)
BUILD FAILED
if someone know solution plz post it here
Thanks

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Where can I find the PDF manual for Premiere Elements?

Does Adobe have a full manual in PDF file format for Premiere Elements 9.0?
P.S. Watch out for trying to handle large (> 700meg) AVI files. Phone support says I'm SOL on bringing in my 6.5 gig 24 minute file. Their solution?
Bring it in small chunks or buy a new computer with more than 8gig of RAM. Why don't they just tell you before you buy, that unless you have an awsome computer, don't waste your money on our software?

Thanks John
I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise). If all you get is the
Using Adobe Premiere Elements 9
Getting started with Adobe Premiere Elements
Adobe Premiere Elements workspace
Projects
Capturing video
, etc links
Then you ain't getting much information.

How to make a backup of a Premiere project?

Hi everyone, do you know how can I make a backup on a external hard drive of a Premiere Pro project with videos, music, text, videos linked with after effects??
or, since for the project, I took files from different folders and even from the desktop for example, do you know how to put all the files in a single folder without losing the properties of the project in premiere?
thank you

thank you, but there is reported: "Project Manager does not collect and copy After Effects compositions that are dynamically linked to an Adobe Premiere Pro project. Project Manager does save the Dynamic Link clip in the trimmed project as an offline clip, however."
so what can I do?

Where do I find more Music Scores for Premiere Elements

Hi everybody
Does somebody know if it's possible to download (for free or to buy) more Music Scores for Premiere Elements 12?
Thanks for answers.

Thanks John
I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise). If all you get is the
Using Adobe Premiere Elements 9
Getting started with Adobe Premiere Elements
Adobe Premiere Elements workspace
Projects
Capturing video
, etc links
Then you ain't getting much information.

Premiere project doesn't import correctly

Hi I'm a new user of After Effects and having some difficulties importing my project from Premiere into After Effects.
When I open AE I hit file, import, adobe premiere pro project, and then I hit my premiere project.
The project loaded with all the files listed and it looks normal but instead of having one file that says "composition" that you can hit and it will load all of the trimmed clips from the project into the timeline, there are several files labeled "composition". I have 25 files that are labeled "composition" which is also how many avi files I used in my premiere project. When I click on one of them it loads the whole video of that avi file and not the trimmed version I made in Premiere. Can anyone tell me why this is happening and how to fix it?
Let me know if you need any additional information!
My system info is:
Adobe After Effects CC 2014 version 13.0.0.214
Adobe Premiere Pro CC version 7.2.2 (33)
Windows 8.1 Pro
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz 3.40 GHz
RAM: 16.0 GB
System Type: 64-bit
AVI Codec: Ut Video Codec YUV420 (ULY0) VCMx86
Quicktime 7.7.5
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

Hi Kevin,
Here is the screenshot of AE after I loaded my project.
Here is a pic of my project in Premiere.
Thanks for looking into this for me! Let me know if you need me to do anything else

Dissolves imported from Premiere project not working in After Effects

When I import a Premiere project into After Effects all the dissolves turn into separate layers (black solids). There is no opacity information being imported for some reason.

What version of Premiere created the project you're importing?

An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).

Hi All,
I have a two node 2003 cluster, When any one of the cluster node holding resources goes down, the resources are not failing over to the running node.
In the running node I receive the pop-up error message
""An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).""
After I click on ok on the pop-up error message the resources are coming online on the running node. If I dont click ok the pop-up error message. The Cluadmin screen is not responding and the resources are not coming online.
In the cluster log i see the below messages realted to Error ID 1726
00000874.00000b10::2014/03/17-23:38:58.276 WARN [EVT] EvtBroadcaster: EvPropEvents for node 2 failed. status 1726
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: SystemTime= 3/17/2014 23:38:58:276
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: GeneratingComponent= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Status= 0xc002100b
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Detection Location= 641
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Flags= 0x0
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Number of Parameters= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
How to FIX this issue?
Regards,
Stunner.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Base on my experience, it may cause by some of one resource abnormal
failure, I suggest that please schedule a down time to run “Repair Active Directory object” in “Simulate Failue of this resource” status. And the operation “Repair Active Directory Object” will force to update the object’s attributes.
More information:
Understanding the Repair Active Directory Object Recovery Action
http://blogs.msdn.com/b/clustering/archive/2013/12/13/9067582.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Information/Properties for Premiere project

Similar Messages

Maybe you are looking for