Information regarding AEOI Link Tables

Hello Experts,
I am ABAP consultant, I have a requirement where in after creation of WBS BOM items With respect to Change Number for a material, through Tcode cs71 and upon SAVING it, a field available in Tcode CC02 ( Lock check box ) which is AEOI-CCLCK must be updated. I mean CCLCK ( Lock in CC02 ) field of AEOI table must be set to 'X' or BLANK.
I am clear that I need to update the CCLCK field of AEOI table for that I require key field values of the specified table ( AEOI ) which are AETYP and OBJKT in the TCODE CS71 if I write an enhancement in it.
Kindly tell me how to retrieve the corresponding values of AETYP and OBJKT from AENNR value available in the Tcode cs71.
Regards,
Murthy.

> Please see the list of tables below and let me know whether these tables contain any Data which might e useful to the customer or is it just some metadata used by SAP and nothing else...
Well - you can check the content of the tables in SE11 and SE16. Whether the data is used or not depends on the customizing of the system and the applications/modules used. Whether this is "only" metadata can only be determined by the customer himself.
Markus

Similar Messages

Where to find the information regarding relationships between the tables?

I am developing a Windows based app which among other things lets users view SAP table schema and relationships.
If I use SAP GUI and dig up a bit on say the MARA table I can see that
Material Master (MARA) is related with
1) MaterialDescription (MAKT) on columns MANDT and MATNR
2) MaterialPlantData (MARC) on columns MANDT and MATNR
and so on
My question is - in which table the information regarding relationships between the tables is stored? There must be a data dictionary table which would be storing the relationships data. Which is it? Note: I will programatically access the table, NOT from the UI.

Thanks a lot...
I am still working on it, but here are the current findings. DD05S, DD08L and DD08T: The schemas for these tables were very promising for the thing I was looking for. Unfortunately the data within dose not seem to serve my exact purpose.
I found another one DD26S, which has almost 90% of the relationships I wish to explore. Do you know what is it supposed to contain?
Thanks a lot for your help.
Message was edited by: Salil Khedkar

Case management link tables in CRM

Hi Experts,
Can any one suggest me the table name where I can find the case details like statues and dates maintained in a particular case.In our business scenario we assign Business activities in the Case. I would like to know is there any link table to find the activities assigned to a case aswell as the status details of particular case.
I have tried getting the table names with CRMCMG but it didnt help.It would be of great help to me if you can share any information you know regarding this concept.
Regards,
Ravi

Ravi
When it comes to status, jest tables are your friends. Maybe view CRMV_INDEX_JEST can help you or, at least, be a starting point for your investigations.
Regards
Joaquin

Link Tables VBAK-LIKP-VBRK

Can anyone tell me how to link the three tables?
I need to get header information from all three tables for a query.
Any suggestions is greatly appreciated,
Thanks,
Michelle

Hi Mitchelle , Please find the detail below.
Technically
Select all the VBELN from VBAK then select VBELN & POSNR from VBAP with reference to VBAK-VBELN.
Then select VBELN POSNR from LIPS (Delivery Item) with reference to VBAP VBELN and POSNR against VGBEL VGPOS in LIPS.
then select the VBRK-VBELN with reference to the VBRK-VGBEL = LIPS-VBELN and VBRK-VGPOS = LIPS-POSNR.
Functionally
VBAK - Sales Document Header
VBAP - Sales Item
LIKP - Delivery Document Header
LIPS - Delievry Item
VBRK - Billing Document Header
An delievry can be created with reference to Sales order and an billing document can be created either with reference to the Sales Document or Delievry Documents that depends on the config.
Please refer the below link for details
http://www.erpgenie.com/abap/tables_sd.htm
Regards,
SEN
Edited by: Senthil Nattamai Sekar on Aug 1, 2008 2:32 AM

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

Crystal report XI error while Linking tables

We have just purchased Crystal Report XI license copy but as we going to create new report there is problem in linking tables
i.e while pressing LINK tab after selecting ODBC databse name application going shut down.Please suggest.Thanks in advance

I would make verify the database within Crystal report and then re publish it again. It seems it doesn't get the connection to the db.
Have you refreshed the database within Crystal Reports?
As Graham said, does it open in Crystal Viewer?
another thing would be to add the DSN (System DSN) onto your client machine as well. Maybe it is not getting a right connection.
Try it and let us know.
Kind Regards
Jehanzeb

Need information on Dynamic internal table

Hi All,
I need some information on dynamic internal table.
I want what are the field names and the values in dynamic internal table.
Is there any function module, which tells us the field names and values of corresponding fields from a dynamic internal table ?
Thank you very much in advance.

Hi,
Program to display/edit database tables dynamically.
REPORT zdyn_table_display.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
            p_rows TYPE I.
* Creation of dynamic internal table
DATA: lv_dref             TYPE REF TO data.
FIELD-SYMBOLS: <fs_table> TYPE STANDARD TABLE.
DATA: lv_table TYPE string.
START-OF-SELECTION.
* Dynamic internal table.
CREATE DATA lv_dref       TYPE TABLE OF (p_table).
ASSIGN lv_dref->* TO <fs_table>.
IF sy-subrc EQ 0.
*    EXIT.
ENDIF.
data i type i.
* Get the data
SELECT *
        FROM (p_table)
        UP TO p_rows ROWS
        INTO TABLE <fs_table>.
CONCATENATE 'Table contents : ' p_table INTO lv_table.
* display the table control.
CALL FUNCTION 'STC1_FULLSCREEN_TABLE_CONTROL'
    EXPORTING
      header            = lv_table
      tabname           = p_table
      no_button         = space
    TABLES
      table             = <fs_table>
    EXCEPTIONS
      no_more_tables    = 1
      too_many_fields   = 2
      nametab_not_valid = 3
      handle_not_valid = 4
      OTHERS            = 5.
IF sy-subrc EQ 0.
    EXIT.
ENDIF.
Getting internal table definition
Try this...
DATA : l_descr_ref TYPE REF TO cl_abap_structdescr.
l_descr_ref ?= cl_abap_typedescr=>describe_by_data( itab ).
Now l_descr_ref->components holds the entire list of fields in itab.
Thanks & Regards,
ShreeMohan

How to see the linked table in oracle 8.0

hi,
i am using oracle 8.0, i have some 8 to 9 tables in it, some of them are linked, is there any way i could see the linked tables, if you do know any utility pls let me know.
regards
user456932

i am using oracle 8.0, i have some 8 to 9 tables in
it, some of them are linked, is there any way i could
see the linked tablesI understand from your question that you are refering to Referential Integrity. I.e you have Parent Tables with Primary Keys and Child Tables linked with Foreign Keys.
It is easier to use GUI tools (OEM, Toad etc) to browse through them. In Toad for instance as a start, you can view the SQL Model. There are other Modelling tools you can use as well.
For the start, you can check USER_CONSTRAINTS and other related dictionary views to find them.
Here is a small example:
select      constraint_name
     ,constraint_type
     ,table_name
     ,r_constraint_name
     ,delete_rule
     ,status
from user_constraints;
The constraint_type will show P (Primary Key), C (Check), R (Referential) etc
However, you can use queries to find Object Dependencies in the Database.
Read more from the SQL Reference Manual to get more knowledge in this area.

Defining Dimensions, Attribute Hierarchies for a Link Table(Many to Many)

I have 3 Tables in the Database
Table 1: Transactions (Fact Table) - PK(TransactionId)
Table 2: Relationship (Dimension1) - PK(Relationship Id), FK_TransactionId, FK_CompanyId, RelationshipType
Table 3: Companies (Dimension 2) - PK(CompanyId)
Table 2: Relationship table is a link table between Transactions & Companies to facilitate many to many relationship.
I defined Fact and Dimension tables accordingly but having issues defining Dimension & Attributes for Relationship tables
Relationship Dimension:
I have 3 hierarchy groups defined
Hierarchy 1 - Relation -Relationship Type,Relationship Id(PK)
Hierarchy 2 - Transaction - Transaction, Relationship Id(PK)
Hiearchy 3 - Company - CompanyId, Relationship Id(PK)
Defined the attribute relationship in the following way
RelationshipID(PK) ---> CompanyId , RelationshipID(PK) ---> TransactionId, RelationshipID(PK)
---> RelationshipTYpe
I am getting incorrect results when I deploy the cube. Not all the types are being displayed only 4 types are being displayed out of 27 types though there exists Transactions for all the Types.
To fix the incorrect results, I tried to break the Relationship Dimension into 2 dimensions seperating Transaction(Relationship Dim) & Company,Type (Companies Dim). I tried to configure a many
to many Relationship type between my Companies Dim & Fact Table Transaction. But I get the error that says
"Companies Dim many to many dimension in the Tansaction measure group requires that the granularity of the Relationship dimension is lower than that of the Relationship measure group "
Any help regarding how to difine Dimensions & Attribute Hierarchies on a Many to many link table is appreciated.

Hi Jaya,
According to your description, you are experiencing the issue when implement many to many relationship by using a bridge table in your SQL Server Analysis Services project, right?
Generally, a bridge table will have a surrogate key for the dimension and a surrogate key to the fact table or a degenerate dimension based on the fact table. Here are some blogs which describe how to implement many to many relationship using a bridge
table.
http://bifuture.blogspot.com/2011/06/ssaskimball-modeling-nm-relation.html
http://www.sqlchick.com/entries/2012/1/22/data-modeling-tip-when-using-many-to-many-bridge-tables-in-s.html
http://social.technet.microsoft.com/wiki/contents/articles/22202.a-practical-example-of-how-to-handle-simple-many-to-many-relationships-in-power-pivotssas-tabular-models.aspx
Regards,
Charlie Liao
TechNet Community Support

I get the exception information from GMail link which I can load directly why?

Server Error in '/' Application.
Forum does not exist - SectionID/ApplicationKey: 2
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CommunityServer.Components.CSException: Forum does not exist - SectionID/ApplicationKey: 2
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[CSException: Forum does not exist - SectionID/ApplicationKey: 2]
CommunityServer.Components.PermissionBase.RedirectOrException(CSExceptionType csEx, ApplicationType appType, String message) +134
CommunityServer.Discussions.Components.Forums.GetForumNew(Int32 forumID, Boolean cacheable, Boolean ignorePermissions, Boolean allowNullReturn) +154
CommunityServer.Discussions.Components.Forums.GetForum(Int32 forumID, Boolean cacheable, Boolean ignorePermissions, Boolean allowNullReturn) +128
CommunityServer.Discussions.Components.Forums.GetForum(Int32 forumID) +48
CommunityServer.Discussions.Components.ForumPost.get_Section() +29
CommunityServer.Discussions.Components.ForumPost.get_Forum() +8
CommunityServer.Discussions.Controls.BreadCrumb.AddPost(List`1 links, ForumPost p) +22
CommunityServer.Discussions.Controls.BreadCrumb.get_DataSource() +376
System.Web.UI.WebControls.Repeater.ConnectToDataSourceView() +183
System.Web.UI.WebControls.Repeater.OnLoad(EventArgs e) +19
CommunityServer.Controls.PreTemplatedWrappedRepeaterBase.OnLoad(EventArgs e) +12
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Control.LoadRecursive() +141
System.Web.UI.Control.LoadRecursive() +141
System.Web.UI.Control.LoadRecursive() +141
System.Web.UI.Control.AddedControl(Control control, Int32 index) +265
System.Web.UI.ControlCollection.Add(Control child) +80
CommunityServer.Controls.ConditionalContent.AddContentControls() +185
CommunityServer.Controls.WrappedContentBase.CreateControlHierarchy() +107
CommunityServer.Controls.WrappedContentBase.CreateChildControls() +32
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +44
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
Version Information: Microsoft .NET Framework Version:2.0.50727.4206; ASP.NET Version:2.0.50727.4209

The only properties and methods for the Link object are listed in the Acrobat JS API Reference you linked to. JavaScript can set a link action, but once set it is not retrievable by JS.
You should be able to write an plug-in with that could be added to a user's system to access this data.

Linked tables, stored procedures, and locking

I'm working on an interface between two Oracle systems. I don't know if they're on the same server or not, but they are definitely two different database instances. The plan for this interface is that when a record is created on one of the systems, it will call a stored procedure on the other system to create the record there as well. I believe the relevant information will be passed via parameters to the stored procedure (not by querying the data in the first system). The ID number created on the second system gets passed back to the first system via an output parameter.
A concern was raised about whether something like this might cause "rev-locking". Similar issues were raised on a different interface, but that interface used a linked table between the two systems. The original design for that interface had a stored procedure initiated from the second system, and it was to update data via the linked table in the first system. But this caused some locking issues. So a different interface was written, that only used the linked table as read-only.
So the question is, do stored procedure calls between linked databases have the same issues as updates directly to linked tables? And a better question is, is there a document or white paper out there somewhere that describes the locking issues between linked databases, and presenting the "best practices" for this type of coding?
Any help is appreciated!
Christine Wolak
[email protected]

So the question is, do stored procedure calls between linked databases have the same issues as updates directly to linked tables? I'm not aware of any issues with updates across databases. can you post a more detail version of what exact issues did you encounter when updating tables across database using database links?
when you update a row in a table, from the same database or another one, a lock on that row will be placed for the duration of the transaction. Others will be able to read that row but not update it till the end of the local (or the remote) transaction.
What issue(s) did you encounter?

Linked Tables in Access DB

I connect to a remote db using odbc connection. All the
tables in the db are linked and I am able to write my CF code to
read the tables and produce reports, etc. Now another person has
gone directly into Access and created a query with some of the
linked tables, and with data from an excel spreadsheet. Since the
query is already built and runs, they want me to take the query and
put it in a CF application so that CF can run it. I am able to
create a table (not linked) in the db and import the data from
excel to populate the table, but when I run CF with the query, it
does not like the table that I created, which I named tblSS_PO.
Here is the error :
Error Diagnostic Information
ODBC Error Code = S0002 (Base table not found)
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object
name 'tblSS_PO'.
Does it not like it because the table I built is not linked
and not part of the original db ? Anyone with any ideas on how I
can solve this problem ? It seems like the data from excel will be
a consistent thing, all I need to do is plug it in each time and
run the query but I cannot get it to work. Thanks for any help.

You have to have the same version of the access file on the
remote server
(one CF is connecting to) as you have on your local system.
Just changing
your local access file does not change the remote file. you
have to upload
your Access file just like you have to upload your site
pages.
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technology, Inc.
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"trojnfn" <[email protected]> wrote in
message
news:ed7kjs$sbo$[email protected]..
>I thought I was putting the table and query in the db.
Like I said, I bring
>up
> Access and open the db and all the tables are there,
even the new one I
> created
> and the query (along with all the other queries) in the
query panel, so it
> looks like they are there. Yet when I run my cf query
with the dsn for the
> db,
> it says the table and query cannot be found. Could it be
that I am really
> connecting to a copy of the db and not the actual db
itself, thus it looks
> like
> it is there but not, since the dsn is to the remot db ?
I am just grasping
> at
> straws here, do not know what is happeng. If I create a
completely
> differenet
> db with the table, will cf allow for two different dsn
at once so that the
> tables from two different dbs can be linked ?
>
>

How do I pull information from a master table to another table?

This may be quite simple, but I'm missing something. I want to pull information from my master table into a secondary table. In the Master Table in Column A, I have a list of teams ("Team 1" through "Team 12"), then in Columns B through D I have information for each assignment given to each team. I want to have a secondary table for each team that lists all of their assignments. So, this is what I want: if Column A says 'Team 1', then I want the secondary table to have the info from Columns B through D.
Again, I'm sure it's simple, but I just can't figure it out.
Thanks for any help.
Mark

Hi Mark,
1) But does this work if in the Master Table (which will be over 300 rows long) each team will show up 10-15 times over the course of the 300 rows randomly (hence the need to have sub-tables for each team...so it's easier for them to see what their tasks are).
Your fellow Numbers enthusiasts in this forum will need more information to help you with that. You are on the right track though with the idea of many tables. Therein lies the power of Numbers.
2) I'm a bit confused by the formula. With the "$A2" do I select the first column in the Master Table? And can you break down the second part of the formula? The "$A$2:$D$4,2,0" Why would you have A2 and D4 in the same formula? They are not in the same row. And what's the 2,0 at the end?
Breaking this question down:
With the "$A2" do I select the first column in the Master Table?
No. The $ keeps the reference to Column A absolute (it won't change to B then C as you Fill Right in the Team Task Table.
And can you break down the second part of the formula? The "$A$2:$D$4,2,0" Why would you have A2 and D4 in the same formula? They are not in the same row.
$A$2:$D$4 is the range of cells (a rectangle) where VLOOKUP will search (in my example) but not in your 300 row table!
And what's the 2,0 at the end?
The syntax of VLOOKUP is VLOOKUP(search-for, columns-range, return-column, close-match)
The 2,0 at the end means "return column" is 2 (the second column of the range) and 0 means "Exact Match" - it won't find a close match. After Fill Right you will need to edit the formula in each Column to change "return column" to 3, then 4, then ...
With a table selected, click on the Function Button in the Toolbar and choose Function Browser. I find that much more useful than the Help Menu. However (there is always a however in life) the Help Menu will show Numbers User Guide, and Formulas and Functions Help. Download them and read at your leisure. The first four chapters of the User Guide are well worth a read. Use other chapters as a reference when you need them.
Regards,
Ian.

Help with linking tables

Hello,
I am not really sure if this is a site that this question should be asked but I have done alot of searching and can't seem to find an answer so....
I work for a large company that uses Oracle for its databases.
In my department we use access link tables to look at the Oracle data.
In one such database I need to link to the oracle tables but only see certain data when I open the link (like a fliter).
I have no idea how to do this...I just know it can be done.. I have heard that you can use Oracle views to do the filtering on the server side and it would only return the filtered data. I think I have to do this with SQL.
But I really dont know how to go about it.
So I am posting here hoping that you guys could help me or point me in the right direction as I don't even know what questions to ask in google :)
I will be glad to give any information you may need to help me out.
Thanks a Million.

user12063135 wrote:
Hello,
I have heard that you can use Oracle views to do the filtering on the server side and it would only return the filtered data. I think I have to do this with SQL.
Thanks a Million.You heard it right and your thouts are are floating in the right direction.
Use views and you will be fine.

ERROR: cannot find information from the FND_FORM_FUNCTIONS table

Hi,
I am in CU2, i have created my project, set the right responsibility in Project property panel of my Jdeveveoper.
When i run the first page all is ok, but if i click on a h-grid link , i receive the following error:
"Your system has not been properly set up. The system cannot find information from the FND_FORM_FUNCTIONS table which is needed for this process. Please consult your System Administrator for further assistance."
This happens only if i launch the custom from jdeveloper. On the Applications, the custom works fine.
Any idea about the error?
Thanks in advance,
Carlo

Please check the calling logic which is written to invoke the custom form from the existing form.

Information regarding AEOI Link Tables

Similar Messages

Maybe you are looking for