Information regarding the OBIEE11g study materials

Hi,
I am new to OBIEE11g. I have started with building repositories. Can you please suggest some books or study materials for understanding the fundamentals of OBIEE11g.
Thank you.

hi kalyani the best way to learn n practice obiee is follow these steps
read oracle(obiee10g ) docs
http://docs.oracle.com/cd/E10415_01/doc/nav/portal_1.htm
oracle learning library
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/biee/r1013/bi_admin/biadmin.html
follow blogs
http://gerardnico.com/wiki/dat/obiee/start
http://oraclebizint.wordpress.com/
http://debaatobiee.wordpress.com/
all the best
rakesh

Similar Messages

I need information regarding the creation of Workbook and WAD.

Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

Hi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks.

Can I get information regarding the client browser using JSP

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

Need information regarding the warranty period of my curve 9360

I was having battery backup issues with my device so I took it to the Blackberry service center. service center people have inspected it and have found that battery is faulty but they have refused to change the battery stating that my device is out of warranty period as its over a year when I purchased my mobile phone and warranty period is for one year only. Although it is clearly mentioned over the Box of my phone that warranty is for 18 months.
Date of Purchase: 21/09/2012
Please help. what should i do?

Hello,
Warranty is a contractual matter between buyer and seller, determined at the time of the transaction. What it states on the box may or may not be governing...it might be overridden by other contractual documents (which, of course, no one here in this user-to-user community can see). If I were you, I would review all of my contractual documents coupled with knowing my local jurisdictional requirements...some governments require some things, while others do not. With you knowing all of that information, escalate with the service center to assert your rights, whatever those are.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Information regarding the variants stored during broadcasting

hi Guru's
we have reporting requirement where we need to fetch the details of the persons whose mail id has been broad casted and the frequency in which they will be mailed
currently i am in need of finding the relationship between the workbook name and the email id
with the workbook name how can we fetch the e-mail to which the mail has been sent
your inputs to this is highly valuable.
Thanks in advance
S.Janagar

hi lavanya,
i think u had understood my requirement wrongly
please go through the question and then please answer it
the mail id details u will enter in the portal displayed while broad casting and then u will schedule it
and the workbook will be sent to the persons whose email id has been given
and my question is in which table u can find these email ids in BW system and more over i need the relation between work book and email ids
with regards
s.janagar

I Need to download the oracle study materials

Hi All,
Couls you please give me URL for to get the oracle pdf books like oracle 9i,10g,11g etc..

Hi,
You can check tahiti.oracle.com/ ,also you can check below library
For 11g
http://www.oracle.com/pls/db112/homepage
For 10g
http://www.oracle.com/pls/db102/portal.portal_db?selected=11&frame=
For 9i
http://www.oracle.com/pls/db902/homepage
Regard
Helios

Important information regarding the Flex 2.0 runtime and UNIX

Hi,
There's an issue with Flex 2.0 when the J2EE is installed on a UNIX server.
upon deployment and running an iView, the runtime shows only a blank grey area.
upon refreshing the browser, the iView is displayed as ussual.
the source of this issue, as we discovered, lays in the configuration of the J2EE engine.
and so - in order to solve this issue, one should access the J2EE Visual administrator and perform the next steps:
1. In Visual administrator, go to HTTP Provider service of the server.
2. Look for the "Never Compressed" property.
3. Add "*.swf" and also "application/x-shockwave-flash" to the list. Make sure that you also add commas properly...
4. Restart the J2EE server and test the result.

Hi,
Please try to delete the browser cache ("Delete temporary files" in IE).
I know that sounds silly, but it could really solve the issue
afterwards you can deploy and run as ussual.
If that works, please let as all know.
(points is also good..)
Amir
Edited by: Amir Mimran on Apr 15, 2008 8:59 AM

Request for information regarding the Lumia Denim and WP 8.1 Update 1 for Lumia 920

When can those of us with the Lumia 920 get the Lumia Denim update and the Windows Phone 8.1 Update 1 Update for our phones? And does AT&T have a time fram for getting us Lumia 920 owners the update or are we not going to get this update until Windows Phone 10 comes out?

GLIMMERMAN76 wrote:
the phone is almost 3 years old they may not update it.. But then again there are suprise around every corner sometimes. People with the 830 are waiting for an update also.When the update came out the phone was about two years old. Now we expect GDR2. On the Microsoft update page there are seven AT&T Lumia phones. There would be eight but the 830 is no longer listed. Did AT&T have it removed ? Only three of these phones have the Denim update available, that is 37.5%. Is AT&T even trying, I don't think so. The same models of phones all over the world have been updated. Now WP10 is coming up. Microsoft says they will update WP10 directly, no carrier in the middle and they say it will be available to all phones and only phones running Lumia Denim, OS version 8.10.14219.341 or higher can be upgraded. So, the phone has to have at least Denim before you can update.Will Windows 10 update be available for my Lumia phone? We bought two 920's from AT&T in 2012. Wife is still using hers and I replaced mine with a 1520.3 last year. It has Qi wireless charging and 32GB memory, not the AT&T version. We no longer have a contract and never will, using 'bring your own phone'.The other 62.5% of the Lumia phone users with AT&T probably feel the same way.

Hello, I would like to have information regarding the promotion of the purchase price of 'bringing a 4/4s iphone 5s, thanks in advance.

help me

There is no promotion for 4/4S iPhones from the Apple Store.
For iPhone 5s > Official Apple Store - iPhone 5s, iPhone 5c, iPad, MacBook Pro, and more

I need some information regarding the Enable-SPSessionStateService commandlet

I am our TFS Admin and by default a pseudo SharePoint 2010 admin as well. We have a couple users who can design and build pages, portals, web parts, etc.. Anyway, one of those users tried to add a web part for SQL Reporting Services
and in doing so caused an error to occur any time someone attempts to access that page/portal (It is actually a dashboard for TFS).
After some digging around, the real error (behind the unexpected error with correlation ID) is "Microsoft.Reporting.WebForms.SessionDisabledException: Session state has been disabled for ASP.NET. The Report Viewer control requires that session
state be enabled in local mode."
As a potential solution to this error I found this:
http://geekswithblogs.net/naijacoder/archive/2010/06/14/140408.aspx
among others referencing the same commandlet.
To my actual questions.
1. This commandlet creates a state service database. Where? Locally or on the DB server SharePoint is using? In my case this is a separate machine.
2. I noticed on my server running SharePoint 2010 I have an ASP.Net State Service running and a state DB on my DB server. Do I need to create a new one? I restarted the service without errors, this did not correct my error.
3. This commandlet alters the web.config files for the farm. In what way? Is there an easy revert which will change them back should this not solve my problem or make my problem worse somehow?
I tried to find some deeper documentation on this but couldn't, so maybe a link to that is all I need.
Thanks Everyone, Stu

The database is created on the default SQL Server/Instance in use by SharePoint, unless you use the -DatabaseServer parameter to specify the server/instance.
Do you have a State Service Service Application in Manage Service Applications in Central Admin?
I believe it adds session state to enabled. Just disable or remove the State Service Service App to revert.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I Need Information Regarding File Upload?

Where can I get information regarding the File uploading packages in Portal. Is there a specification I can get a hold of. I know such a package exists, as it is used by portal itself. I just need to know where I can get hold of information as to what it is called and how to invoke it.

Suraj,
The APIs to do file upload are not public as of yet. We are looking into the feature right now. Currently, the only supported method of file upload is using the Web Interface.
You may find more information about this in the 9iAs Portal forum
Sue

Regarding the Remote Function Module

hi,
Can any body can provide the brief information regarding the Remote Function Module.
1)How to create the remote function module
2)how it differ from the normal function module
3)any special features about this.
Thanks in advance

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
check out the following link it might help you
http://help.sap.com/printdocu/core/Print46c/de/data/pdf/BCFESDE2/BCFESDE2.pdf
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
<b>Reward points for useful Answers</b>
Regards
Anji

Need information regarding Solaris kernel Delayed write operation

Hello Friends,
I need information regarding the delayed write operation in Solaris.
Would be thankful if anyone can give me some details.
Thanks in advance

1) When you post code, please use[code] and [/code] tags as described in Formatting tips on the message entry page. It makes it much easier to read.
2) Don't just post a huge pile of code and ask, "How do I make this work?" Ask a specific question, and post just enough code to demonstrate the problem you're having.
3) Don't just write a huge pile of code and then test it. Write a tiny piece, test it. Then write the piece that will work with or use the first piece. Test that by itself--without the first piece. Then put the two together and test that. Only move on to the next step after the current step produces the correct results. Continue this process until you have a complete, working program.

Regarding the memory of my files

i have around 20mp3 files which do not take 1 gb of space..but the memory status of my mac book air shows around 1 gb of audio files??i need whelp regarding this...and also information regarding the backup of files in iTunes..

Sound files can be found in a lot of places on the computer not just the iTunes folder. The operating system has sounds and so do many programs those would all be listed as sound files.
what you want to know about backup files of iTunes?

Script to get all the information about the server

Hi,
I am looking for a script which would provide me with all the information regarding the server, which software were installed, service packs, patches, updated etc.
please let me know if you have any script or PS command to get the information in an excel sheet .
Reason :- The servers are in the process to be decommissioned, as we are going to build new ones, so we need all the information present on the server before being decommissioned
Please Advise.
Satyam....

Hi Satyam,
Any update?
Please refer to the following PowerShell comlet, related article and similar thread. And check if can help
you.
Get-Hotfix cmdlet: gets the hotfixes
that have been applied to the local and remote computers.
Use
PowerShell to Find Installed Software
Listing
all the patches/updates installed in Windows machine
However, based on your description, the issue seems to be related to script or PowerShell comlet. I suggest
that you would post your question in
PowerShell Forum or
Official Scripting Guys Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu

Information regarding the OBIEE11g study materials

Similar Messages

Maybe you are looking for