"information required for activation couldn't be obtained"

Hey, my (original, 16gb) phone was working fine all day. I started to download 2.1, and tried to add some movies (I have manual synch enabled) when I got an unknown error message. I ok'd, and continued on, and now whenever I connect my phone, I get a message "The iPhone _ cannot be used with iTunes because the information required for activation could not be obtained from the iPhone." and in smaller text, "check that the SIM card is inserted and that it is not PIN-locked." The iPhone screen says to connect to iTunes, and restarting it didn't remove this message. I'm positive that the sim card is inserted, as I used my phone multiple times today, and I've never PIN-Locked my phone. Could this issue be caused by the phone being in airplane mode? I put it in airplane mode to use some old iPod speakers, and forgot to take it out. I've never gotten this before. Please help me.

I may have figured it out. I called apple (which you may want to do rather than try this alone). I had them stumped at first but then he had me force the phone into recovery mode. I held down both buttons until I got the apple logo and it went black at which point he said it is completely off.
Then he had me unplug it which it already was. Then I held down the home button and plugged it in until I saw the usb plug again then I let it go. As I say, you may want to call them and tell them what I did to fix mine. I am sitting here watching it as it restores from my backup. Good luck and reply back if you have questions. I will try to answer them but I am no expert.

Similar Messages

The information required for Activation cannot be obtained!

While upgrading to the 2.0.1 iPhone Firmware the phone locked and now it won't sync with iTunes in that it states that "The iPhone cannot be used with iTunes because the information required for activation cannot be obtained from the iPhone." Does this mean that the iPhone needs to be returned, or is their a manual way to fix this problem?

Try recovery mode. From:
Eric Hermanson
Posted: 15-Aug-2008 9:33 PM in response to: FH Person
To enter recover mode:
1. Turn your phone OFF. If you can't turn it off, FORCE a turn off by holding down the Power and the Home buttons together for 5 seconds.
2. While your phone is turned OFF, HOLD DOWN the Home button. Keep it held down.
3. Connect your phone to the USB cable on your computer. KEEP the Home button held down during all this time.
4. Keep holding the Home button down until you see the iTunes/restore screens appear on your computer and your iPhone.

Complete information only for activated RFC calls ( settings) error SM66

Hi,
I have a BW, CRM 5.0 & ECC 6.0 instances.. And I have created new users in all the systems with SAP_ALL permissions. After successfull password change, I entered the SM66 T-Code to view the WP list but I am getting error "Complete information only for activated RFC calls (> settings)" like this. I couln't find any log in SM21for this error. But I am able to view all the work process in SM50 and I am able to view all the Application Servers list in SM51 T-Codes.
Thanks
Suresh Sammeta

Hi,
This is not an error but an information message :
Diagnosis
Complete information on report, transaction, memory usage amongst other things, is only available when the option 'Only display short information, avoid RFC' under 'Settings' is deactivated.
Regards,
Olivier

Updated Information Required for KB: 159865

Dear "dedicated
team for the development issues who will be able to assist you accordingly."
Please assist RE:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/updated-information-required-for-kb-159865/e74cd617-49f7-4725-b0ac-3c1cc7cbc3f7
Steve F

Hi Kevin! I have been unable to reply on this forum for quite a while. Unfortunately, after being advised to delete and re-create my LIVE account, by a member of a Microsoft Support team, I tried replying, but received IIS errors, then the page simply wouldn't
display the "reply box", no matter what browser or version!
Beyond that, I don't have much of an update. I didn't think you were serious. What would you like me to check "%windir%\inf\setupapi.dev.log"
for, specifically? I'm asking where to find a mapping, without even knowing how the mapping is done, or what it would be logged as, if it is logged at all!
Asking a vague question in response to a specific question, is by no means helpful. Again, I have various certifications from various companies as a Storage Administrator, Unfortunately, I have yet to get a certification of divination in regards to the source
code of proprietary software.
Someone who knows what the error message means in physical reality needs to explain it, because the message itself does not refer to physical reality in any coherent
way. It seems to refer to an abstract identifier, although, that is of course, speculation at best.

Cisco Access Registrar 5 : What design or requirements for active/ active deploiement

Hi Every one
I want to install Cisco Access Registrar 5 on two different servers in active/ active design
What design or requirements for active/ active deploiement ?
Using Sun Solaris ? (i know using sun Sloaris i can have this mode of high availability BUT I PREFER INSTALLING IT ON RED HAT ENTERPRISE )
Using RED HAT ENTERPRISE on the two servers ? i wan to knew if i must use Vmware with the adequate licences (Vcenter) to provide FT fonctionnality for active / active Design ?
How i can use the replication to provide a complet active / active Design ?
Cordialement
Zammit Ikbel

It depends what functionalities you want to use on CAR.
For example:
If only plain authentication is needed, you can install two servers independently and just configure replication between them (they just need IP visibility to replicate configuration). NAS clients can contact servers in round-robin or you can share load on two servers in some other way.
If you want CAR to perform session management and dynamic IP address allocation, than you need some cluster solution, as two servers must have synchronized state of sessions and consistent administration of addresses allocated from a pool.
Best regards,
Jasmina

Hardawer requirements for active standy pair

Could any one give some advices what requirements are needed to do the active standby pair replication?
I've configed an environment, but the a-s mode only work when active and standby ds are located in the same machines, if they are located in different machines, the standby machine's ds is always in "idle" state:(.
BTW,do we have any detail guide on how to config the active-standby and hardware environments required?
thanks!
Michael

Generally speaking, for an active/standby pair both machines should be pretty much identical since either will need to be able to cope with the expected application load. However, this is not a mandatory requirement.
The mandatory requirements for all* machines involved in a single replication scheme are that they:
1. Have the same type of CPU
2. Are running the same O/S and O/S version
3. Have the same version of TimesTen (cross version replication is supported while doing a rolling upgrade but is not supported for routione operational running)
Although replication may _work in configurations that do not comply with the above, it is not supported on such configurations.
You say you are getting a SEGV; what is SEGVing? If your configuration conforms to the above requirements and some TimesTen component is SEGVing then you should open an SR so that we can investigate this.
Chris

ITunes Credit Card of Paypal REQUIRED for activation?

Just as the title states...I have a valid iTunes account that used to have CC info tied to it, but at this time, it does not...I am free to dl free content from the store....
Is this all I need for an "valid iTunes account" for activating my iPhone?
Thanks!
Ryan

No apology necessary. Now I understand your question, but I may not have an exact answer (someone else might though).
If I recall correctly, a credit check for you to have an account with AT&T is done during the activation process within iTunes by you providing your SSN.
Because no dollars are going to be exchanged between you and Apple (unless you want to purchase something from the store of course), I don't see why it wouldn't work.
But the key issue here is what they mean when they say "valid". Does a valid account mean a valid email address, or an email address and card or Paypal account on file?
Hope this helps.

Information required for Microsoft Azure cloud hosting

I am looking for hosting my application on Azure cloud server and would like to inform you that my application is in ASP.NET 3.5 with database on SQL Server 2008 R2.
Before we proceed further with Microsoft Azure cloud hosting, I would like to clarify some of my below mentioned queries:
Hosting:
What are the plans of hosting along with pricing and server configuration.
How many applications we can host.
How much space we will get.
Can we deploy and run some exe, which we developed for sending email.
Currently we are using InProc session. What modification will be required by the application.
Can we point our DNS to the application we host.
We do development on our On-Premise environment, do we also get any staging/testing server along with production server.
Does the usage of application on staging server is chargeable.
How many instances we will be getting for one application
Does environment automatically increase or decreases the instances in use as per increase or decrease in load.
SQL Azure:
Which version of SQL Server we will get.
Does SQL Azure is compatible with all the features and datatypes of SQL Server 2008 R2? If not then please let us know features and datatypes which are not supported by SQL Azure.
What all SQL Server version’s database can be restored on SQL Azure.
What will be the database size.
Will the database will be in the same datacenter where our application reside.
How many database we can create
How we can take database backup, is there any control panel for that.
How we can schedule database backups
Can we restore our On-Premise database with the database bakup taken from SQL Azure.
Can we connect database from our local machine with “SQL Server Management Studio”.

Hi SanVerma,
Thanks for your posting!
From your description, I think firstly you need confirm which one host service could meet your target. I suggest you could refer to this page about Azure Websites, Cloud Services, and Virtual Machines comparison:
http://azure.microsoft.com/en-us/documentation/articles/choose-web-site-cloud-service-vm/
The above link could answer your hosting questions 1,2,4.
Hosting:
>>3.How much space we will get.
It depends on your size:
http://msdn.microsoft.com/en-us/library/azure/dn197896.aspx
>>5.
Currently we are using InProc session. What modification will be required by the application.
You need use the Azure cache service or SQL Azure storage to store your session data, please see those blog:
http://blogs.msdn.com/b/cie/archive/2013/05/17/session-state-management-in-windows-azure-web-roles.aspx
http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-session-state-caching/
>>6
Can we point our DNS to the application we host.
If you use Azure VM to host your application, you could use Azure Virtual Network to deploy your DNS server, Please see this page:
http://msdn.microsoft.com/library/azure/jj156088.aspx
>>
We do development on our On-Premise environment, do we also get any staging/testing server along with production server.
>>
Does the usage of application on staging server is chargeable.
Yes, you can do this. If you use Azure cloud service stage/production environment, You could be charged. If you use single VM to host your production and staging project, you could be charged the single VM.
>> How many instances we will be getting for one application
It depends on your requirement, If the quota is not enough, you could contact the Azure support to increase the quota. >>Does environment automatically increase or decreases the instances in use as per increase or decrease in load.
Azure platform support the AutoScale. You can set the feature using code or portal.
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-dotnet-autoscaling-application-block/
http://msdn.microsoft.com/en-us/library/hh680945(v=pandp.50).aspx
SQL Azure:
>> 1.Which version of SQL Server we will get.
Firstly, you need clarify the SQL Azure and sql server. SQL Azure is a data as a service. SQL server in VM is a VM which is installed sql server. If you wants to use SQL Server, I suggest you could refer to this pricing page:
http://azure.microsoft.com/en-us/pricing/calculator/?scenario=virtual-machines
>>    2.
Does SQL Azure is compatible with all the features and datatypes of SQL Server 2008 R2? If not then please let us know features and datatypes which are not supported by SQL Azure.
>> 3.What all SQL Server version’s database can be restored on SQL Azure.
>>4.What will be the database size.
I recommend you refer to those post and blog about above 3 questions:
http://social.technet.microsoft.com/wiki/contents/articles/996.comparison-of-sql-server-with-azure-sql-database.aspx http://stackoverflow.com/questions/3235164/what-is-the-difference-between-sql-azure-and-sql-server-2008
>>   5
Will the database will be in the same datacenter where our application reside.
You could select the region when you create DB/VM.
>>
How many database we can create
Please see this page about sql azure limits:
http://msdn.microsoft.com/en-us/library/azure/ee336245.aspx
>>7,8
http://msdn.microsoft.com/en-us/library/azure/jj650016.aspx
>>9Yes, you can use the Import and export database feature:
How to: Use the Import and Export Service in Azure SQL Database.
>>10
Yes.
http://azure.microsoft.com/en-us/documentation/articles/sql-database-manage-azure-ssms/
About how to use SQL Azure, you could refer to this page:
http://msdn.microsoft.com/en-us/library/azure/ee336282.aspx
Hope it helps you.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PAyer information required for 2 million billing docs

Hi Experts
We have around 2 million billing documents for which we would just require following two information.
a) Billing document number (We allready have this list)
b) Payer
It's been difficult to extract this information through table VBRK due to volume of billing documents involved. Could you please let us know if there is any report or easier way to extract this information quickly.
Regards,
Santosh

Dear Santosh
Definitely 2 million billing documents is a huge amount of datas and in foreground, I reckon, you will get a dump error. Instead, go to VF05N, click from top menu bar "Program -- Execute in background", set date and time (should be for night) and save. Next day check the report how it is generated.
thanks
G. Lakshmipathi

Information required for all currency formats settings.

I need information in Web Dynpro Java for currency format.
currently I have following fields in application:-
1.Wrbtr Amount in document currency
2.Waers Currency Key
In local dictionary I could see Amount type as simple type in external representation I could see #,###.00## format.
This format has a problem with Yen currency that if ECC shows 1000.00 then Portal shows only 100.00.
Please let me know how dictionary works about pair of keys an values of above fields.
Please let me know solution of this problem.
Higher points will be rewarded for immediate solution and appericated also.

Hallo Laxmikant,
to correctly format BigDecimal price values depending on a given currency YOU MUST apply structure binding:
- define a dictionary structure with a currency field AND an amount field and relate the amount field to the currency field.
- bind a context node to this structure so that the context attributes are created from the sturcture fields.
In this way the Java Dictionary Runtime will correctly format the decimal places for the amount depending on the given currency key (see ISO 4217). For the Jordanian Dollar JOD three decimal places are rendered, for the Japan Yen (JPY) zero.
Look at this [Table Tutorial|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20tutorials%207.0/web%20dynpro%20sample%20applications%20and%20tutorials.htm#46] which applies the sctructure binding and currency-formatting technique.
With your formatting pattern approach on simple type level you cannot adapt the formatting pattern for different currencies.
In NW CE 7.1 you can use the new CCTS-datatype Amount.
Regards, Bertram

Information required for BAPI

Please provide some information or links concerned to these questions
1) What are BAPI's ?
2) What is the use of BAPI's in xMII?

Hi Adarsh,
BAPI's are what xMII uses (usually) to communicate to ERP. Information on BAPIs use to be available at ifr.sap.com and was very useful. For some reason (grrr) that site is no longer available. However, you can still find information on BAPIs by using transaction code SE37 from SAP GUI.
BAPIs are basically web services that xMII passes XML formatted data to and from to either query ERP, record data, or perform transactions against ERP. There is a boat load of information on xMII and ERP Templates using the BAPIs on the sdn at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90537bfe-fd6b-2910-fda3-b04f1177c51e [original link is broken]
If you have a working JCo connection to an ERP system from your xMII server, many of these templates will work with a few small tweaks after downloading them.

IPlanet performance information required (for sizing a new system)

iPlanet performance. I am currently sizing a nre system and need some information around the performance of iPlanet. For example, the number of pages served against CPU usage. Does anyone know if there is a standard out there that records this information (similar to TPC for database performance). Cheers. Neil

Hi,
If you are planning to go with EP 7, then installation master guide can help you.For EP 7 you need
1)Oracle 10.2.0.2
2)WAS java or ABAP
3)EP installation master DVD(sapinst.exe)
4)Support Packs (for e.g SP 10)
This installation has KMC inbuilt that means you need not to install unlike EP6,Once installation is done you need to apply for license on https://service.sap.com --> key & requests,on this request,SAP will send you license file, it will be a TXT file, you only need to upload it on your server.
Hope this helps,
Regards,
Ameya

License information required for Disaster recoery side.

Hi,
Do we reuire to purchase a license for Disaster recover side for Oracle Database server10g, in the DR side we are planning to use oracle datagurad.
Regards
Imteyaz.

user12831732 wrote:
Hi,
Do we reuire to purchase a license for Disaster recover side for Oracle Database server10g, in the DR side we are planning to use oracle datagurad.
Regards
Imteyaz.Please contact your local Oracle office to get more detailed information on license

Information required for e-load report

I would like to gather more information on the items displayed in e-load sessin report, under "Performance by Profile and Timer", like
Avg?
Std Dev?
90th %?
I guess I know about following two items
Min: Min time VU took to navigate a perticular page
Max: Min time VU took to navigate a perticular page
I have attached the sample report.
Thanks

The e-Load help says the following:
Avg - the average performance for the virtual user profile or server response timer in seconds.
Std Dev - the number of seconds that the performance of virtual user profiles or server response timers deviated from the mean (average value).
90th % - shows the number of seconds that the performance of ninety percent of the virtual users or server response timers was at or below.
For some reason your attachment had question marks in it, so I cannot see exactly what you were pointing out.
-GateCity_QA

The credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!, the credit card details required for activating the apple id for use in he app store is causing issues. kindly help !!

after feeding in the correct details of my credit card and password, there still are some issues for which im not able to use the app's
kindly explain as to how to get out of this issue

i tried once again to get through but after i filll in the details of the credit card the expiry date and the password and all other details and press the continue option , it show an error on the top right hand side of the page which is "your paymant method was declined please enter valid payment method information'.

"information required for activation couldn't be obtained"

Similar Messages

Maybe you are looking for