Information store in pre dme

hi experts,
I want to know what table store information in pre dme..
TQ

Hi,
It wil be stored in 'BT' table of payroll. If you go to transaction PC_PAYRESULT and if check the table BT, you can see the payment related information and when bank transfer is done.
rgds.

Similar Messages

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

When I try to create a calendar announcement in my iCloud calendar thru my PC / Outlook, it says 'the set of folders could not be opened. The information store could not be opened'. Can anyone help? This means I cannot set any calendar events thru my PC.

When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?

If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).

Exchange Server Information Store has encountered an error while executing a full-text index query

Hi Team need help
Exchange 2013 EAC doesnt show the databases and it gives message
"Your request couldn't be completed. Please try again in a few minutes."
Its a 9 Node DAG and I stopped and diabled Search and Search Host controller on all of them
in the event viewer see a lot of Event id 1012
Log Name: Application
Source: MSExchangeIS
Date: 4/1/2013 9:23:48 AM
Event ID: 1012
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ex1301.dagdc.com
Description:
Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*",
mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))"). Error
information: System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeIS" />
<EventID Qualifiers="49156">1012</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-01T16:23:48.000000000Z" />
<EventRecordID>192599</EventRecordID>
<Channel>Application</Channel>
<Computer>ex1301.dagdc.com</Computer>
<Security />
</System>
<EventData>
<Data>and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*",
mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))</Data>
<Data>System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)</Data>
<Binary>5B444941475F4354585D000084000000FF09000000000000000268000000808A00100000000080CA00100000000080B200100000000080D200100000000030FF001000000000309F00100000000030DF001000000000B09D001000000000B0DD001000000000B0ED001000000000B08D001000000000B095001000000000B0A5001000000000</Binary>
</EventData>
</Event>

Hi,
Please reenable and start the search engine service and try again.
The simillar case for your reference:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/4f43ef50-b71f-4ab3-8ced-70f1c36c5509
Hope it is hlepful.
Fiona Liao
TechNet Community Support

RPC request to the Microsoft Exchange Information Store service for log truncation

Hello all
Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
the file. Also log files are not being flushed
Bulls on Parade

Hello,
Please verify backup software.
Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
failed state, please restart the Exchange replication service and then check the status again.
Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
check configuration information for MAPI network and Replication Network.
If the above configuration information is ok, please check if there are other related errors in application log.
Cara Chen
TechNet Community Support

#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error.

Hi,
I created a mailbox few days before, everythign was working fine and suddenly when some one tried to send email on that mailbox it bounced back with following error:
There's a problem with the recipient's mailbox. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: Mail01.abc.com
[email protected]
#550 5.2.0 STOREDRV.Deliver: The Microsoft Exchange Information Store service reported an error. The following information should help identify the cause of this error: "MapiExceptionNotFound:16.18969:9A000000, 17.27161:00000000CC000000000000000600000000000000,
255.23226:00000000, 255.27962:FE000000, 255.17082:0F010480, 0.26937:94000000, 4.21921:0F010480, 255.27962:FA000000, 255.1494:00000000, 255.26426:FE000000, 4.7588:0F010480, 4.6564:0F010480, 2.17597:00000000, 2.25805:00000000, 4.8936:0F010480, 4.14312:0F010480,
4.2199:0F010480, 2.25805:00000000, 4.8936:0F010480, 2.22957:00000000, 2.19693:00000000, 2.17917:00000000, 2.27341:00000000, 4.8936:0F010480, 4.17097:0F010480, 4.8620:0F010480, 255.1750:0F010480, 0.26849:0F010480, 255.21817:0F010480, 0.26297:0F010480, 4.16585:0F010480,
0.32441:0F010480, 4.1706:0F010480, 0.24761:0F010480, 4.20665:0F010480, 0.25785:EC030000, 4.29881:0F010480". ##
Original message headers:
Received: from Mailbox.abc.com ([fe80::892d:93d6:b1ac:b70a]) by mail01
([10.72.0.95]) with mapi; Fri, 11 Jan 2013 14:04:55 +0500
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Anwar Amjad <[email protected]>
To: All-HEC <[email protected]>
Date: Fri, 11 Jan 2013 14:04:53 +0500
Subject: FW: Suggestions & New Arrival in HEC Library
Thread-Topic: Suggestions & New Arrival in HEC Library
Thread-Index: Ac3vHgwR50OLs2BnQuOzo9jWg4e1gQAvJtUw
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected]>
MIME-Version: 1.0
X-Auto-Response-Suppress: DR, OOF, AutoReply
After this error, i treid to send email again and there is no error and email was delivered. What was the cause of this error?
Hasan

Hi,
I tried to start seeding again but it is at same status. I will try again and hopefully it will get resolved.
But, yesterday i ran in to the most complex issue i have ever seen with Exchange.
There was a unexpected power cut at our datacentre due to which both the nodes went down.
After that both the nodes came up. But the all 3 databases were dismounted.
Therefore, i ran Eseutil /mh resulting dirty shutdown.
I was able to repair 2 databases.
But the 3rd one was not mounting with below error.
Microsoft Exchange Error
Failed to mount database 'Mailbox Database'.
Mailbox Database
Failed
Error:
Exchange is unable to mount the database that you specified. Specified database: XXXXX\First Storage Group\Mailbox Database; Error code: MapiExceptionJetErrorAttachedDatabaseMismatch: Unable to mount database. (hr=0x80004005, ec=-1216).
I was able to mount database somehow. There are 7 User mailboxes (Tier 1) on this database.
All emails sent to the users in this database are bouncing back with the below error.
This storage groups holds the mailboxes of my Senior Managements. And their mailboxes are down for almost 20 Hrs. I am spinning my head since yesterday but not able to find any fix. Can you please guide me in this concern.
Best Regards
K2
Kapil Kashyap

Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed

Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?

Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS

Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.

PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards Bernhard

IPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan

Error in Pre-DME

Hello All
Getting error message in Pre DME program
R55 Error for personnel number and transfer number 76746
Is this a master data or program error
Please advise us to fix this
Regards
sk

> We are getting errors in Pre-DME for checks. The error description is misnomer.
> "Error for personnel number and transfer number 40000000 01"
> This is happening due to IBAN and in the listed function. Not sure how to got out of this. ACH are working well.
> RPCDTK09                           892         PERFORM check_zbnkn_ziban_filled.                  "JLA1265111
>
> RPCDTM00                          1460 *&      Form CHECK_ZBNKN_ZIBAN_FILLED
>                                             1468 FORM check_zbnkn_ziban_filled.                             "JLA1265111
>                                             1511 ENDFORM. "CHECK_ZBNKN_ZIBAN_FILLED
Seems to me like a payroll issue (there's no context, even nothing mentioned about an upgrade).
I can just point to
Note 1265111 - Payroll: Considering the IBAN in the BT
Note 1285219 - DME: Message 3G 612 for checks
or to an HR forum.
Markus

Syncing iCloud with contacts and calendar in MS Outlook 2007, will get message that "the set of folders cannot be opened. The information store could not be opened."

I install the iCloud Control Panel and information is uploaded from my Outlook Contact folder to iCloud. ICloud folders are created and syncing process between my iPhone, iCloud, and Outlook works for a while (day or 2). Then, when I open Outlook after a day of 2, I get the above message that "The set of folders cannot be opened. The information store could not be opened." The only resolve that I have found is to uninstall the iCloud Control Panel, the reboot my Windows computer, then reinstall the iCloud Control Panel and resync contacts and calendar to icloud. This is getting to be very cumbersome to use this feature. What is the cause of the problem that it keeps on disconnecting to iCloud?

I have also fixed it by uninstalling and then reinstalling iCloud, but as you have experienced, the problem recurs without reason. Apple would/could not help as they say that the problem is with Microsoft's Outlook and that I should talk to them. Microsoft's techies won't help without me paying some £200 as I have a Professional - a student's - version of Office 2007. This is scandalous. It is obvious, from the many who have reported the same problem n this forum, that Microsoft should look into this urgently and create a fix

TS4463 I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened.

I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.

I tried rebooting. It didn't change anything.

Issue with Information broadcasting and pre-cal server in SAP BI

Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
Narendra

Hi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra

Exchange Server 2013- Information Store Service not starting

Hi Everyone,
We are having an issue with one of our Exchange Servers that is running Exchange Mailbox server role.
Server : Exchange 2013 CU3 , Windows Server 2012 R2
We noticed on Friday that its "Information Store Service" has stopped working and we try to manually run it (Services->Microsoft
Exchange Information Store Service -> Start)
Service didn't start and gave : Error 0x80004005 Unspecified Error
Trying to start the service using the command line using: net start MSexchangeIS gave us a different error:
System Error 16389 has Occurred
The system can not find message text for message number 0x4005 in the message file for BASE
Event viewer has (Event ID : 7031):
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
Since we have got this error we have tried some fixes such as Checking Time synchronisation and IPv6 issues. But nothing
seems to have caused this. We have rebuild the windows server from scratch and used the recover server switch to rebuild the Exchange server. Still the same issue.
Any help would be greatly appreciated.

Hi Tiraj,
Any update? Does the issue still occur after install Exchange server on Windows Server 2012?
I wonder if the issue occurs suddenly or did you configured something on database.
In addition, overload on server could also cause the issue.
Regards,
Rebecca Tu
TechNet Community Support

Data flow diagram - missing information stores

I am creating data flow diagrams using sql developer data modeler. Often, the information stores that I created and used in the Data Flow Diagrams in the process model are simpy gone when save, close and reopen the model. Even the XML files on the disk are gone. I am using version 2.0.0 build 584. Any idea why this is happening?

Hi,
There is a SQLDeveloper version 2.1.1 (Patch 1) out there.
You could try with that one, just in order to see whether your problem still persist.
If so, let is know.
Cheers!!

Information Store service terminated unexpectedly, event id 7031

We have Exchange 2010 (coexistence with 2003) running SP3 and a DAG with two members. It now happens occasionally that suddenly all mailstores are running on mailbox server. I had them balanced (manually) on one, so I examined the event viewer. There I saw
The Microsoft Exchange Information Store service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.
EVENT ID 7031
A few seconds later it is started again. But since several mailstores are running on it, it takes some time before all stores are mounted again and so users complain that Outlook disconnects. The time it is down, is too short for the DAG to switch over to
the replica, so we have a real downtime here.
Is this a known issue and what can we do for this? I really need to fix this ASAP as you can understand, since we have like 1500 users already now on this environment. I saw this fix:
http://support.microsoft.com/default.aspx?kbid=2803727
In there also two issues with information store being stopped are reported here.
Thanks for all your help!

Thanks Gulab,
No, no major change. We are only moving mailboxes now from the old 2003 to the new 2010 server. I have seen that this happened for a long time already, but probably never during working hours. There is no actual trend. Today it happened once. Yesterday it
happened like 5 times. other days, just once a day, a few times never.
We are running TM Scanmail.
Here the full details
System
Provider
[ Name]
Service Control Manager
[ Guid]
{555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName]
Service Control Manager
EventID
7031
[ Qualifiers]
49152
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8080000000000000
TimeCreated
[ SystemTime]
2014-01-14T09:16:32.732892000Z
EventRecordID
90280
Correlation
Execution
[ ProcessID]
672
[ ThreadID]
6532
Channel
System
Computer
xxx162.eu.ykgw.net
Security
EventData
param1
Microsoft Exchange Information Store
param2
1
param3
5000
param4
1
param5
Restart the service
4D005300450078006300680061006E0067006500490053000000

Information store in pre dme

Similar Messages

Maybe you are looking for