Informational task - but not SendMail step - Reg.

Hi,
I have this requirement where i need to send some informational mail /  message to the agent. The problem is, I have to use this in one stream of the fork and if i put this as a dialog task with DISPLAY method, the user needs to execute(dbl click) this witem in order to close the Fork(2 out of 2). But, he doesn't need to act upon this as this is just an informational message. If I use the SendMail step, then this is not a workitem and so will end up in Documents Folder of SAP Inbox and will not be picked up by the Extended Notifications , for delivery to the user's Outlook.
Can anybody have any idea how to handle this issue. Please respond immediately.
THanks in advance,
venu

Rose,
sorry for late reply. Actually, i tried this. But, for some wierd reason, the wflow was always coming thru the "Undefined task" where I left one branch of the fork(1 out of 2) empty and so had the previous issue.
Anyway, I decided to educate the user to execute the witem(dblclikcing and viewing the document) and he is convinced right now. Thanks
Abhishek,
Thanks for your help.
venu

Similar Messages

  • Interface is successfull but not all steps.

    I have imported an Interface from Repository A to Repository B. After this it's executing successfully in Repository B but not all steps. Due to this, the target table is not populating. Here is what I did.
    1. Created a master repository MA and work repository WA
    2. Developed the interface.
    3. Run the interface. It's working properly. See the snapshot at
    http://www.flickr.com/photos/uday_sunrise/478322469/
    4. Exported everything from here to files.
    5. Created a master repository MB and work repository WB
    6. Imported all the exported files in step 3 here in Synonym INSERT_UPDATE mode.
    7. Run the interface. It's completing successfully(without errors), but not completing all the
    steps. Due to this my target table is not populating.
    See the snapshot at http://www.flickr.com/photos/uday_sunrise/478322473/
    Please help where is the mistake.
    Thanks,
    Uday

    Take care of these things while you Import the Interface from one Repository to another.
    1.) u follow the import step wise
    First import the physical schemas.and map them to logical schame with samename and context as in previous repository.
    Then,import the models in designer that are to be used in your interface.
    Finally Import the Interface.One Important Thing to mentio here is that any mapping(in Diagram Tab) in an Interface needs to be done again.
    Your Screenshots are not visible .

  • I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate inform them but not received any feed back from their side, please advise and protect my Ipad.

    Dear Sir,
    I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate informed them but not received any feed back from their side, please advise and protect my Ipad.
    LOCATION : SAUDI ARABIA. DAMMAM - I have travelled from KOZHIKODE TO DAMMAM.
    I HAVE KEPT MY IPAD SEAT POCKET#42H, ,
    I have tay it several time thru ICloud still it's in offline.
    Saudi air lines customer support services not responding properly,
    You are requested to protect my IPAD and advice for the next.
    * Can I get back up files from that IPad.,
    waiting for your prompt reply as soon as possible,
    best regards,
    ZAMEER MAIDANI
    <Personal Information Edited By Host>

    This is a user-to-user technical support forum. We can't do anything to "protect" your iPad. If your files are backed up (and only you would know if so and where) you should be able to access them from your back up.
    Did you have Find My iPad enabled?

  • ICal subscription showing tasks but not meetings

    I'm using Huddle (http://www.huddle.net) to manage my projects and teams and have successfully been syncing the calendar items I have there with my desktop iCal using a wecal:// calendar subscription url.
    However, since upgrading to Snow Leopard and iCal 4.0 this feed still syncs tasks, but not meetings. No error messages are given, the meetings just aren't there.
    Any ideas? Surely the ical spec hasn't changed and this is a Snow Leopard issue?
    To confirm this I tested it on my Mac Mini which still has Leopard - and it works fine there.
    Message was edited by: bfgmartin

    I have the same issue with syncing subscription calendars. Just popped up when trying to sync my kids' sports calendars. OK with iCal, but nothing comes into calendars on MM or iPhone.

  • Firefox shows in tasks but not on desktop. Have uninstalled and reinstalled but no change

    I was using Firefox ans suddenly it will not show on desktop. It shows in Task Manager but NOT on desktop. Have uninstalled and reinstalled 3 times to no avail. Can you help? I hate all the other browsers!

    Are you sure there is no problem at the source?  Have you tried contacting the publisher to see if they are sending the right files?  And the format of the files?

  • User completes approval task but system is not marking it completed

    My SP designer workflow has intermittent issues completing the task after the users does their part.  We've taken one of the web servers out due to the thought that the sessions were getting split up (IIS logs showed this happening) between the
    two servers, but the issue resurfaced today.  This user completed one task no problem, but when he completed the next task shortly after the system didn't finish up the second task so it 'stalls' (that's what I call it).  The stalled task
    doesn't get completed so the workflow doesn't move on.  I'm out of ideas.
    I've searched but can't find any reference to this behavior with approval tasks.  It is pretty straightforward OOTB approval processing but has intermittent issues.
    Anyone??
    thanks - Carlene

    Hi Victoria,
    Thank you for your reply.  Here are the responses to your questions:
    No, there are no errors in the workflow when the task is not completed.  I've turned on versioning in the task list and versioning shows the user modifying the task but the 3rd step of the system marking the task complete isn't occurring.
    No, the issue occurs intermittently which has made it almost impossible to figure out the cause.
    Creating a new approval workflow with the exact steps is really labor intensive unless we copy and modify it.  This has not been done.
    We've been looking at the ULS logs and the Workflow trace logging and what we recently discovered is an Access Denied error which has been narrowed down to a possible expired User-token and look-up to another domain by the initiator's ID.  All of our
    users are in domains other than the domain the SharePoint servers are in but there are two way trusts established.  We have since moved the approval processing step into an Impersonation step in the workflow which runs under the system account. 
    We are now watching and waiting to see if this will help.
    Another thing to note is all our users are granted access to SharePoint through AD groups which are then added to SharePoint groups.
    We are working with Microsoft on this and hopefully we can get it resolved. When we do I will post the outcome, in the meantime I welcome any other suggestions.
    Thanks - Carlene
    Carlene S.

  • DAC - drops indexes in the task but does not create them back

    DAC is dropping indexes for a task but not recreating them. The execution plan drop/create checkbox is checked and other tasks' index drop/create is working correctly. Index setup is checked for drop/create as well.
    Is there somewhere within DAC that controls this function?
    Any suggestions are appreciated.
    Thanks.

    You want a "Drop Box" style folder. You should be able to achieve this by creating a folder and giving it permissions similar to the "Drop Box" folder in your users Public Folder (i.e. write only permissions.)

  • Keyboards and apps but not a phone

    i've been using palm devices for over 10 years as a pda (contacts, datebook, memos, tasks) but NOT as a phone. my tungsten t|x appears to be choking on all the events since 1998 it contains. i'd like suggestions about upgrading to a device with a keyboard that would accept all my dates, but that i could use WITHOUT the phone feature (i'm ok with tracfone, thanks).
    Lee De Cola.

    ldecola wrote:
    i'd like suggestions about upgrading to a device with a keyboard that would accept all my dates, but that i could use WITHOUT the phone feature
    If you want to stick with Palm Desktop, consider a used late-generation PalmOS-based Treo (e.g., 755p). You won't need to activate the phone if you only want to use the PDA apps.

  • ITunes will not open and tells me to use the "information" to open in 32 bit rather than 64. but the information pane does not offer that option ...

    I am trying to open my iTune 10.4 on my mac mini which is running OS 10.6.8, and I get the message that I need to use the information pane to open in 32-bit rather than 64. But the information pane does not offer this option. I'm in a vicious circle of opening, getting this message, then having to close. Did this come about after the June update of iTunes? And if so, why haven't they fixed it? And what can I do? You'd think Apple would want be to be able to spend my money in their store ...

    Try following steps and test one at a time:
    1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
    2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • Firefox is already running but not responding,No process in task manager,Restart and uninstall not useful.Profile manager error

    So one day when I opened my mozilla firefox Ive got the "Firefox is already running but not responding.To open a new window,you must first close the existing firefox process,or restart your system."
    So I checked my task manager but there is no process,I then checked hours in the internet to find a solution.Yes,I also checked for solutions in this site.Then,I try uninstalling and restarting,it also didn't work,Next I also tried downloading profilemanager and tried to run it but as unlucky as I can be,it also didn't work. Please help :(

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • I saved google tasks as a bookmark & the "space" is there but not the tasks

    I saved google tasks as a bookmark and then dragged them into the bar above my tabs. The Gmail envelope logo and the word Tasks appear nicely. However, when I click on it, I get a blank rectangle on the left side of my screen, with none of my Google tasks listed. It does say "Tasks" at the top - but no list.
    I would really like to be able to pop out google tasks and have them show at my option no matter what tab I'm on. (I can view them any time by going to Gmail or GCalendar, but if those tabs are closed, tasks are closed).
    Barring this, is there a different task and calendar I could use that is more compatible w/ firefox. I use an awful lot of gmail but don't use the integration features, so might just be able to use a different set of tools that I could keep "popped out" and viewable as I do my other work.
    Thanks
    Jeanne

    '''Opening in the side bar is the default for bookmarks that are created via a link or button on a website.'''
    Ok. I guess when I use the dragging technique, that is creating via a link?
    '''You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B).
    In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.'''
    Yes, I can do that, but I have no idea what the significance is of what I am seeing in Properties.
    '''Make sure that "Load this bookmark in the side bar" is not selected.'''
    It was not selected.
    May I ask this question another way, please. How DO I add the Google task list to Firefox, step-by-step?
    Sorry I am just not getting it. I appreciate your help. This one is just not intuitive for me and I can't extrapolate.
    Thank you
    Jeanne

  • Task fails on server but not on my development PC

    hi
    I have this annoying error on my server but not in my PC,
    When I run the task from VisualStudio2010 it works perfectly. Then I deploy the package to my SqlServer2012 "Intgegration Services Catalogs" and run the deployed package from the SqlManagementConsole I got the error.
    The source is an oracle DB and the query wich calculate the field "MONJTO_HRSEXTR" do it with this "sum(nvl(h.monto,0)) monto_hrsext" on the select statement.
    I guess the problem is SSIS thinks that the column MONTO_HRSEXTR is "Unicode string[DT_WSTR]" with "lenght=38" and when the conversion process try to cast to Decimal(12,2) it fails. There are 2 big questions here
    1.Why it works on my development PC and not in the server when deployed?
    2.why the "Data Conversion Transtormation Editor" thinks the field is a  Unicode string[DT_WSTR] if that field is a sum result from numerics fields in the oracle table
    Thanks a lot!!! for any Idea
    Salu2 Sergio T

    Hello
    Thanks for your time, I made a modification
    to the package to redirect all rows
    that cause error
    All errors are rows with decimal values
    ​​such as "11.3" "33.44"
    All values ​​are using "," instead of
    "." and that's the problem
    what is strange is that the same source,
    in both cases the same database
    It will be something related to the
    configuration of the oracle client on the Windows
    server? The Oracle is in another server, a unix server.
    I do not know much about oracle.
    I know we use TSNnames for connecting, but I really don't know what to see, any idea??
    thanks again for your time Jan
    Salu2 Sergio T

  • I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my Mac computer and still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help?

    I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."

    Lmwilliamson wrote:
    Kernel panics:
    After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists. 
    I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
    I am able to use my computer in Safeboot mode (only)
    Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
    If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
    If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
    Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
    ..Step by Step to fix your Mac
    Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about.

  • V6.01, Windows 7, click on icon, "firefox is already running but not responding" Task manager doesn't know about it. I can't quit it or get it to load. Brand new install. What to do?

    Brand new Lenovo computer, Windows 7 Home. New install of Firefox 6.0.1, set as default browser, don't launch when I click done. Icon appears in tray. I click the icon, and a message says "firefox is running but not responding. To open a new window, you must first close the existing process, or reboot". It's not obviously running. I can't find a way to make it quit. Task manager doesn't list it as a current application. Uninstall using the control panel uninstall function and then reinstalling gives the same message. Rebooting doesn't fix the problem and gives the same message. Firefox had been working until I tried to update my bookmarks.

    No can do. I can delete the current profile and install Firefox, which should create a new blank profile. The message still says "Firefox is already running." I can place my old profile in the proper folder, and Firefox will still be already running. I can't actually use Firefox, because even though the message says it is running, there is nothing on the screen I can access.
    After uninstalling Firefox, deleting the two items left in the Programs folder, and deleting the profile again, it still didn't work. I then got frisky and from the Roaming folder I deleted the Mozilla folder which contains the Firefox folder which contains the now empty Profiles folder. That worked, and a new set of folders with a new blank profile were created. So apparently it was the empty folders that never got deleted that were causing the issue.
    Thanks for your suggestion. It got me thinking.

  • Firefox 29.0.1 on Windows 7 (64-bit): ALWAYS get "Firefox is already running but not responding..." error and need Task Manager to close/restart Firefox.

    I run Firefox 29.0.1 on Windows 7 (64 bit) and I get the "Firefox is already running but not responding. In order to open the program you must close the existing window." error. EVERY TIME I try to start Firefox. The posted solution works to start the program, but it is not a permanent solution. I go through the Task Manager and end the old Firefox process, then I can open a new window. While working, I can open multiple tabs and multiple windows, everything seems to (usually) work the way it should. Then after I completely exit Firefox, in order to open the program again I need to fix the SAME error again. Every time. It doesn't seem to hurt anything really, but it is quite annoying.
    I used to get this same error on some of the older Firefox versions but it was only once in a while. With the new 29.0.1 it is literally EVERY TIME I TRY TO RUN FIREFOX!!!!
    So, down to the big question: is there a permanent fix for this yet? Or will there be one included in the next version update? Or am I going to have to go back to Internet Explorer? I know I am not alone in this experience; i've seen several other users posting similar questions but none of them received satisfactory answers. So what's the story here, team Firefox?

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

Maybe you are looking for