Infoset and formula variable

Hello Gurus
I have couple of questions:
1) Using an Infoset, I want to do the following - Start with a Cube and do a left outer join with another ODS and in the same infoset do a left outer join between the Cube and an InfoObject. Is this possible?
2) I have a keyfigure which is an attribute of a InfoObject and hence it cannot be a navigational attribute. So to use that keyfigure in the query, we are using a formula variable and populating that keyfigure as a replacement path. However, the values for the keyfigure are being rounded off in the query. for e.g. if the value of the keyfigure in the master data attribute is 21.84, it is being displayed as 22.00. What setting could I be missing. I tried everything in the keyfigure setting?
Any help is appreciated.
Thanks,
Rishi

Ajay ,i would still repeat ,its 0FISCPER and not )posting period ,data model do not have posting period itself as infoobject
also for Sam,
it uses 0DATE and i use 0FISCPER so that link do not help ,moreover they use the dimension ID = DATE i cannot use that as am not counting the date fdiff or number of days here
thanks
can any one give me precise soln ,be great

Similar Messages

Difference between New Formula and Formula Variable

Can any body explain what is the difference between New Formula and Formula Variable.
Thanks

Hi,
Formula:http://help.sap.com/saphelp_nw04/helpdata/en/d3/8057f830a911d4b2be0050dadfb23f/frameset.htm
Formula Variable:If you want use variables in the formulas of a form, you need to use formula variables. You can use formula variables only in form reports, and must define them in the form itself. They can be replaced in the same ways as text variables when you execute the report.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db0b1555411d189660000e829fbbd/frameset.htm
Bye
Dinesh

Prompts issue and Formula variables.

Hi,
1. I have a variable in Bex report as Creation date, but when it comes to webi the default prompts comes as creation date(From) and Creation Date(To). Is there anyway to modify or delete these default prompts.
2. In one Bex report , i have a formula variable purchase order, based on this only the report output(as a condition) is displayed.I think that the conditions are not transferred from bex to webi, because the webi output is standard for all values of the purchase order. Is there any way to delete the default purchase order prompt

Hi
Answer to Q1.
There would be a Filters specified to prompts DATA as creation date(From) and Creation Date(To). You have to change the filter condition as REQIRED.
Answer to Q2
FORMULA variable is not transfer to WEBI. You have to define a NEW FORMULA in the WEBI Query Designer.
Hope its a use ful info..
Regards

Calculated Key figure and formula variable issue - Urgent

Hi,
I have created a formula variable on dates. When I run this locally it returns results. Now I have created a calculated key figure on this formula variable. It is not returning any results. Any idea on why this is happening.
Thanks,
Kal

Hi Kal,
Can you paste your Formula & Calculated Keyfigure calculation.
If possible give information on ur formula variable ( processing by , charactesristic , replace variable with ( if it is replacement path ) , Dimension id )
Regards,
SRIKANTH

Text variable and formula

Hi,
Can any one give the scenario for text variable and formula variable?send the documents to mail id <removed>
Thanks in advance,
kumar.

Hi Chandu,
You can see details here:
Re: Dynamic population of Text Variables
/message/2969896#2969896 [original link is broken]
Hope this helps...

Formula Variable with User Entry

Hi,
I'm confused with Formula Variable with Replacement Path and Formula Variable with User Entry.
PLz, Explain with an example .....In which senarios Formula Variable with Replacement Path is used and In which senarios Formula Variable with User Entry is used.

Hi,
Suppose you have some key figure sales.
Now in the report you want to display 10% of sales or may be 20% of sales based on the user input.
In this case you will define formula variable with user input. Because here percentage will be varying based on user input.
And suppose you have a key figure price which is attribute of material and you want to use that price for calculation in the report. In this case you will define formula varible with replacement path.
Let me know if you need more information.
Regards,
Mansi

Formula Variable - Key of Cost Element (Query crashing)

Hi everyone,
I have created a formula variable which returns the Key of the Cost Element (0costelmnt) which resides in a Key figure structure. I have used this in a number of formula (If Cost Element = 50000 * (A * B) and its working fine.
Formula Variable
Formula Variable Properties
My issue is that this query crashes constantlywhen you are in the Query Designer in both our Dev and Production environments, yet the query runs fine in the Analyser.
The only thing I note is the icons in the key figure structure, some squares which are standard key figures / formulas and formula variables but my Cost Element Form Vari and the Bonus and Salary Increase Formula variables are represented by a triangle which normally means characteristics!!
Any suggestions?
With thanks
Gill

They query runs perfectly, there are no null values in the output.
I have already regenerated it and no change. I do not have an issue with the output so RSRT is going to give me the same results as I get in the Analyser.
The issue I have is that any changes I make in Query Designer, the programs shuts down.

Formula variables with replacement from key

Hi Sdns,
Well We are doing Upgradation from BW3.5 to BI 7.0.. After Upgrade we got stuck up'd at reports.. We are facing an error for a report which is formula variables with replacement from key is not working. The final result is giving us unexpected results i.e, Itz showing the values as X.
We got some reference from Service.sap. We found a note which is 1005772. Howeer this Note is applicable for suport package level 12. But we are already in higher suppor package level 15.. So this note is not applicable.
Can anyone guide us if u people have faced this kind of issue.
Regards,
Aluri

Hi,
Replacemet path processing type can be used with Charceteristics variables, text variables and formula variables.
For example u have created two restricted Key figues for two
years sales comparison and u have used characteristics variables on 0CALYEAR.
The years for which we want to compare sales volume will be selected during the Execution.
If 2000 and 2001 be selected,
these can be assigned as text for restricted Key figures in the record.
Please go thorough the following links.
An application of Replacement path variable can be found here.
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Another application to get the Document Count: For example Number of Sales Orders.
Query formula-Counter???
Example for Replacement Path: Characteristic Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/78a03c1178ad2ce10000000a114084/content.htm
Variable Replacement Example
http://help.sap.com/saphelp_nw04/helpdata/en/af/809528939d5b4fbff7e16a5bdc0d85/content.htm
Example for Replacement Path: Formula Variable.
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5f9ac61a205a459d0e7ef313d10321/content.htm
Hope it's helpful......
Thanks,
Kameswari.

Formula Variable with Replacement Path - drillup ref.char and still working

Hi all,
I have a requirement, where formula variable (with replacement path) shouldn't work when I remove the reference characteristic from the rows. But this is not the case at the moment
I have 'Brand' and 'Material' in the rows and there is 'Material Indicator' in the columns. This 'Material Indicator' is a formula and there is formula variable in it with the type replacement path.
Reference char is 'Material'; Replace with 'Attribute Value' is selected also. As attribute I am selecting one of the attributes of the 'Material'.
In the report output, I am seeing relevant attribute values when Material is in the rows. But when I remove the Material from the report, I still see the values for this Material Indicator column. But I expect to see blank instead..
Can you please share your comments?
Thanks in advance.
S.P.

hi,
Irrespective of the drilldown on Material, the fomula variable will be replaced by material value. This is how replacement variable should behave. You might have to change the design. For more inputs, let me know your requirement exactly.

Formula Variables and their use

I have a scenario where I have a date selection using a variable.
I get from and to date defaulted to 1st day of the month and current date
Next, I created a formula variable to calculate the difference between these 2 dates.
I can't uses replacement path variable to calculate the difference becaue the dates are not part of the transaction data.
When ever I bring formual variable into a formual it gives an error
Terminate: Variable D1QDQC684JU76RD3FQ10GECZ9 (D1QDQC684JU76RD3FQ10GECZ9) does not exist or is incorrectly used D1QUMP50BGW24SQ9PQMZDSMD1 [A418(BRAIN)]
This error is not in the customer exit. This error happens in the query designer design phase during syntax checks.
Thanks for your help
Kartik

there was a problem in defining the variables, while u r opening your query, and if its getting terminated means, definition of the variable and its usage is wrong somewhere else.
Here is the step by step procedure for Formula variables:
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html

Formula variable used in exception and condition - gives a check error

The same formula variable is used in a condition and exception within a query. When I click on "check", I get the message "Variable <myvar> Is Used By More Than One Infoobject". The variable is a formula variable, processed by User Entry/Default Value, with optional entry, ready for input, Dimension "number", default value -0.01. However, the query still saves, generates and executes without problem.
This is with BW 7.0, SP 14. And with query designer 3.5, version 3500.7.572
I'd be grateful if a few people could try to reproduce this, letting me know their version. To reproduce it:
Create a query. Create formula variable processed by User Entry/Default Value, with optional entry, ready for input, Dimension "number", default value -0.01. Create a condition using the variable. Create an exception using the variable. Click on Check. Save and execute the query.
Thanks
Matt

It is a warning and you can ignore it , if in query execution you get correct result / output...(then it implies u r on safe side)
But if you are so much concerned about warning then as a workaround just create another Formulae variable and use it in Condition and use the previous formulae variable for Exception.
This way you will have 2 variables for 2 different purposes
and you will get rid of the warning message.
So far if you get the correct output of query then there is no need to worry.
Edited by: kartikey on Dec 20, 2007 1:45 PM

Variable and Formulas Question

Hi folks,
I use BOXI r2 sp 4 and I have a general question re: variables and formulas in Webi reports.
Billing Year Month and Cost of Service are standard time dimensions and measures that I use in my Webi reports and they were created at the semantic level.
Normally, I create cross tab reports with the Billing Year Month along the horizontal axis and the Cost of Service in the Body (Business Unit or Department would be placed along the vertical axis).
For some reason, when I use formulas/variables to modify the standard time dimensions (like changing Billing Year Month to Year), the values for the Cost of Service are returned incorrectly.
Example.
Semantic object: Billing Year Month = (yyyy-MM) returns correct values
Report variable: Substr([Billing Year Month;1;4) returns incorrect values
Can anyone please explain this problem?
Thanks,
Wannetta

Hi John,
The attribute of the Billing Year Month at the semantic level is a character type.
After reading your response, I realize that I may not have been clear regarding the problem.
The following formula does return the correct value in and of itself.
>=Substr([Billing Year Month];1;4
If I create a variable and then drag it onto my crosstab, it returns the correct value ONLY within the header.
When I drag the cost of service measure onto the crosstab; the header values remain the same but values in the body either disappear or the change to reflect incorrect values.
I thought one of the prime features of Webi was the ability of the Report Developer to create variables/formulas and use them in the headers to manipulate the semantic "measures" in the body (read: output) at the report level.
Is this a matter of semantic design or does Webi not possess this capability?
Or, is the issue entirely different?
Thanks!
W.

Formula Variable and Exception Aggregation

Hello
Please can you explain me how this works.
There is formula variable created on a change date.(Replacement Path) with replace with Key.
Then this formula variable is put in a formula as NODIM(Formula Var) and the exception aggregation is set as Total with Ref Char selected on the same date(Change Date).
Now this is coming up with values like 2202374. If i remove the exception aggregation then i get an X in the values. If i then include the change date in the rows i get the date.
Please can anyone let me know how this would be working. Effort Appreciated.
Thanks

Here is a scenario that might fit:
Formula is trying to show the latest change date without adding it as a drill down. The only discrepancy is that the exception aggregation would need to be set to maximum value instead of Total.

Is variable offsets can be used for characteristics, text and formulas?

hi all,
can anyone let me know whether variable offsets can be used for characteristics, text and formulas.
if so cany one send me examples of using offsets to my email id [email protected]
regds
hari

You use offsets on dates (0CALMONTH, 0FISCYEAR, 0DAT and so on) and of course the corresponding texts.
If you have 0CALMONTH in your query and you want to do the same thing not only for the current month but for the past twelve months, they you just minus 1, 2....11,12 for each selections, and at the same time you can create text variable for the description of each month.
thanks.
Wond

Formula variable and agregation

Hi,
I want to use price of materials (form ATTR) in a query (multiplied with quantity from transactional data).
A formula variable was created and working fine when materials is also displayed in a query. But I would like to create a query based on material group and material should not be displayed.
Is this possible and how (aggregation, properties, ...) ??
Thanks and regards,
Tomaz

Try creating a global calculated key figure with the same definition as the one that you created locally in the query.
Global calculation occurs before aggregation, so this should solve the issue you are having by getting incorrect values when you do not display material in your query.

Infoset and formula variable

Similar Messages

Maybe you are looking for