Infoset BI - not showing created on - variable in a query

Hi
I created an infoset based on two cubes, in one of the cubes used in the infoset - the Billing cube I have my document dates-created on (0createdon) infoobject.
When I try to create a query reporting of the infoset, I can see the infoobject but not all the variables in the created on. At least 4 variables are missing from the Created on object.
Any thoughts?

Hi Michelle,
If you have created four variables and selected all four variables and you still can't it all, it could be because the criteria of your variables are similar and the system ignore some of them. have you check the messages from the BEx status area? it is on the bottom left hand corner of your BEx.
cheers.

Similar Messages

After iOS7 install my iCal entries do not show "created by or edited by". Is there a fix?

After iOS7 install my iCal entries do not show "created by or edited by" also in Twitter I can't see number of retweets or favorites, it's become invisible. Any fixes?

Well seeing as I'm running Lion on 2 GB of RAM, I can't see how upgrading the RAM will make that much of a difference. If you are seeing launch times in minutes, it probably indicates your cache got corrupted by some third party cache cleaning software. To see if some corruption can be fixed, first backup your data:
https://discussions.apple.com/docs/DOC-1992
Then boot in safe mode, holding the shift key. If issues persist in safe mode, run the hardware test that came with your Mac.
http://docs.info.apple.com/article.html?artnum=303081
And if that is unrevealing, and booting into safe mode doesn't solve anything, and you are backed up, try repairing the directory by:
1. Booting into the restore partition with command-R.
2. Selecting the installer's Utilities menu.
3. Selecting Disk Utility
4. Selecting First Aid
5. Selecting the boot partition.
6. Click on repair disk (not repair permissions)
Do NOT proceed with any install itself. Just quit the install program
If the disk is not able to be repaired, purchase Alsoft Disk Warrior, and boot of that to repair the directory.
If it is able to be repaired, and the machine is still slow, I think you may have run into some RAM that is bad, and need to replace it, not add to it.
If Disk Warrior can't repair the hard disk, replace the hard disk itself.

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Boot camp not showing ''Create a Windows 7 install disk''

So i am trying install windows 7 64 bit version on my 2008 macbook pro and i dont know if this is the problem or not, it doesnt show ''Create a Windows 7 install disk''.
The other thing that i have not made clear is, when doing a windows 7 cd, do i need to burn ISO file on DVD or should i open it and burn all the files inside the iso image, to the disk?
Is there any specific ways or versions of Windows 7 for bootcamp or i can dowload any tipe of windows 7, put it on cd and use it as a bootable CD?
P.S.: I already had windows 7 ultimate 64 bit installed on the macbook. I installed it from my friends copy of Windows 7 Ultimate and i cant find that CD anymore, so when i tried to do a new copy of windows on CD and do the bootcamp it didnt recognize it, like there was no installation disk. That means i should make a bootable CD with windows 7 files on it or what?
Thanks for help.

The Boot Camp help guides are here: http://www.apple.com/support/bootcamp/
The Boot Camp forum is here: https://discussions.apple.com/community/windows_software/boot_camp

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

Create new variable in a query using if

Is it possible to create a new variable in a query based on an if statement.
eg select A, B, C from table where condition
C is the new variable and should have a value of 10 if A is > 100 and a value of one if A > 100 and B < 200 for example.

Yes. Why not.
select a,
         b,
         case
             when a> 100 then
                10
             when a> 100 and b<200 then
               1
          end c
from table
where <condition>;Regards.
Satyaki De.

SearchBox Not showing the result while entering the query in XSLT Listview webpart

I Have a programmitically created a XSLT listView webpart,in that webpart I have a Searchbox.If any search query i given in that box result is not showing or list items is not filtering based on the query.My code is below
SPListItemCollection listItemColl = this.GetData();
SPListItem listItem = null;
string ListName = string.Empty;
string listViewName = string.Empty;
try
// create our List View web part
XsltListViewWebPart wp = new XsltListViewWebPart();
SPWeb web = SPContext.Current.Web;
if (listItemColl.Count > 0)
listItem = listItemColl[0];
if (listItem[CommonResources.List_Field_TilesListName] != null)
this.divListviewConfigTileWrapper.Controls.Clear();
ListName = Convert.ToString(listItem[CommonResources.List_Field_TilesListName]);
SPList list = web.Lists[ListName];
wp.ID = ListName + "_WP";
wp.ListId = list.ID;
wp.ListName = list.ID.ToString("B").ToUpper();
wp.WebId = web.ID;
if (listItem[CommonResources.List_Field_ListViewName] != null)
listViewName = Convert.ToString(listItem[CommonResources.List_Field_ListViewName]);
wp.XmlDefinition = list.Views[listViewName].GetViewXml();
wp.ViewGuid = list.Views[listViewName].ID.ToString("B").ToUpper();
else
wp.XmlDefinition = list.DefaultView.GetViewXml();
wp.ViewGuid = list.DefaultView.ID.ToString("B").ToUpper();
wp.InplaceSearchEnabled = true;
wp.AllowConnect = true;
wp.AsyncRefresh = true;
wp.ViewGuid = list.Views[listViewName].ID.ToString("B").ToUpper();
wp.View.TabularView = false;
Control ctrl = (Control)wp;
this.divListviewConfigTileWrapper.Controls.Add(ctrl);
Any please help me regarding this.

Hi Karthik,
Is your question related in any ways to Microsoft scheduling solution PROJECT? In case it is, please develop with more details about the exact issue, technology, environment, version...
In case it is not, please delete and post it to the right TechNet forum in order to have an helpful hand.
Regards.
Guillaume Rouyre - MBA, MCP, MCTS

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

How to create Text Variables in BEx Query Designer

How can i create Text Variables in Bex Q.D.
I am able to create characteristic variables
but i can't find option to create text variables.
What's the requirement to create Text variables in Bex Q.D.
When i try to create Text variable for 0calDay.. the variable type is characteristic by Default and disabled.
How can i create text variables related to 0CalDay with which i need to work in Customer Exit.

Hi,
You have to create characteristic variable processing by Customer Exit by considering 0CalDay as a Reference Characteristic
After creation of the above variable, you restrict your KF with the above created variable.
Now you can create a Text variable for the description of your KF. This way it works...........
Regards,
Suman

Trace not showing Global container variable at mapping test time.

Hi Folks ,
I have a scenario file to Proxy scenario. At mapping time I am doing a lookup inside a UDF using JCO connections.
Lookup is taking 2 fields(ex X an dY) as input and coming up with couple of fields in output.
Output fileds I am storing in global container and want to access in further mapping .
I am using trace to see variable values at mapping tijme
Surprisingly :
1. For a particular "X" field in Input, No output fields are coming at trace . On testing it end to end I can see fields getting populated at run time at lookup table . but not getting reflected at mapping trace . what could be the possible cause ?
2. For few input fields like "Z" . It is showing all the output values at Trace. But when I go and place a value in lookup table for the same Input field "Z" . this new value is not coming up at trace Level while rest of teh values are coming up. Can anyone hint where I am going wrong ?
End to end Debugging sahows values populating and being sent across . Where I need to look at ?
Regards ,
Santosh

Hi Horia ,
By trace do you mean display queue or running the mapping completely in the ESR ?
--->I am talking about running the mapping at IR and getting the values of trace by using messagetype.traceinfo() in UDF functionality. I am working on Pi 7.0
Regards ,
Santosh

BEx variables not showing correct order despite ordering at query level

Dear Experts,
I am using a workbook with 2 queries sharing same variables.
The Queries variable order for display in the popup screen has been re-arranged at Query designer level (query properties > variable sequence). Regenerated queries. Relogin to BEx . Re-run workbook. Same old order.
Please advise what could be the cause. I am also wondering if this is due to personalisation.
regards
Bass

Hi Bass,
You mentioned workbook.
If the query itself also has this problem, it can be a bug as SAP Note 1568815.
Symptom
The sequence of the variables in the variable screen is lost.
You may implement the correction of this note via transaction SNOTE if the SP of your system fits.
After that, you need to regenerate the query in RSRT.
Regards,
Patricia

Xcode debugger not showing my instance variables!!

I hate asking questions like this.
I set a breakpoint in an IBAction method 'pushed:' inside FooViewController. At runtime I pressed a GUI button and processing stopped in pushed:.
In the data-viewing pane of xcode, I see
{code}
self = (FooViewController *) 0x... etc.
{code}
Indented under this is
{code}
UIViewController = (UIViewController) { ...
{code}
Nowhere do I see any of my instance variables!!
Now, they were synthesized from properties, but that doesn't matter, does it?
The code that proceeds to set some instance variables runs fine.
Why isn't xcode displaying self's instance vars?
Thanks,
Chap

Yes, yours looks like I was expecting mine to look.
Note that viewDidLoad (below) does work correctly, producing the expected results in the simulator!
Hangman3ViewController.h:
@interface Hangman3ViewController : UIViewController {
@property (         nonatomic )           NSInteger wordLength;
@property ( retain, nonatomic )           NSString *alphabet;
@property (         nonatomic )           unichar    guess;
@property (         nonatomic )           NSInteger guessNo;
@property ( retain, nonatomic )           NSMutableString *board;
@property ( retain, nonatomic ) IBOutlet UILabel   *boardLabel;
@property ( retain, nonatomic ) IBOutlet UILabel   *guessNumberLabel;
@property ( retain, nonatomic ) IBOutlet NSArray   *keyboardButtons;
- (IBAction)letter:(id)sender;
- (void)showBoard;
@end
and, Hangman3ViewController.m:
#import "Hangman3ViewController.h"
@implementation Hangman3ViewController
@synthesize wordLength       = _wordLength; // preprocessor command to gen getter/setter and instance variable
@synthesize boardLabel       = _boardLabel; // preprocessor command to gen getter/setter and instance variable
@synthesize guessNumberLabel = _guessNumberLabel; // Guess #n
@synthesize keyboardButtons = _keyboardButtons;   // array of buttons
@synthesize alphabet         = _alphabet;    // A-Z unichars
@synthesize guess            = _guess;       // unichar
@synthesize guessNo          = _guessNo;     // int
@synthesize board            = _board;
- (IBAction)letter:(id)sender
            Get letter from sender - driven when key button is pressed.
            The button's tag is an int from 0-25, identifying what letter of the alphabet it is.
            Extract that unichar from ALPHABET as 'guess'. Then, disable the button,
            which has been defined to have its text turn white (invisible) when disabled.
    UIButton *button = (UIButton *)sender;
    self.guess = [self.alphabet characterAtIndex: button.tag];
    NSLog(@"Received keystroke: %C", self.guess);
    [button setEnabled:NO];
- (void)showBoard
    self.boardLabel.text = self.board;
    self.guessNumberLabel.text = [NSString stringWithFormat:@"Guess #%d", self.guessNo];
- (void)dealloc
    [_boardLabel release];
    [_guessNumberLabel release];
    [_keyboardButtons release];
    [super dealloc];
- (void)didReceiveMemoryWarning
    // Releases the view if it doesn't have a superview.
    [super didReceiveMemoryWarning];
    // Release any cached data, images, etc that aren't in use.
#pragma mark - View lifecycle
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad
    NSLog(@"Hello from viewDidLoad");
    [super viewDidLoad];
    self.alphabet   = @"ABCDEFGHIJKLMNOPQRSTUVWXYZ"; // unichar string
    self.wordLength = 7; // temp - will be set from flipside later on
    self.guessNo    = 1;
    [self.board setString:@"_______"]; // actually dynamic based on wordLength
    self.board = @"_______";
    [self showBoard];
- (void)viewDidUnload
    [super viewDidUnload];
    // Release any retained subviews of the main view.
    // e.g. self.myOutlet = nil;
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation
    // Return YES for supported orientations
    return (interfaceOrientation == UIInterfaceOrientationPortrait);
@end

How to create a variable in Bex Query Designer

Hi guys,
I am writing a query for a travel management report using the SAP Standard cube. I would like to restrict the query so it only shows me the last two months excluding the current month. I have checked BI content in RSA1, but I canu2019t find a relevant SAP standard variable that I can use.
Can anyone please tell me if I can create my own? And if so, how I can do this.
Many Thanks
Forhad.

lets say u want to display following picture:
sept$-----august$
City
-chicago123$--
44$
so in Query designer go to Default values section.
Bring in Calendar month
right click calendar month
and hit Restrict
now select variable
use standard sap variable Current Month.
hit okey
now select Variable and hit Red button
Result u restricted current month.
in columns bring in keyfigure $
right click and hit edit
bring in time field calendar month
right click and hit restrict
bring in Current month
right click and select - SET OFFSET FOR VARIABLE
select -1
hit okey
repeat the above process
and this time select offset = -2
this way u restricted current month
but displayed last 2 months for keyfigure values.

Date and time not showing correct whe imported to Power query

Hi,
I have an Excel list that I imported to another Excel file via Power query. A few of the imported columns contains date and time, for example 2013-11-09 20:19. When imported to Power query this will show as 41587.84652777778 and only dates/times with zero
hours and minutes will show correctly. When trying to change the data type to Date/Time it returns an error for all cells containing hours and minutes.
I use a Swedish version of Excel that uses a different time format compared to standard excel and also uses a , as a delimiter between date and time compared to the . used as delimiter in standard excel. Don't know if that can explain
this problem?
Brgds,
C

I updated Power query earlier this week, so it should be the latest version. When I created the sample file now the problem appears, so if it is a bug it has not been solved.
You find the sample file on the link below. 4 sheets with some info on the problem, the data, the query result and one sheet with the data and query result as pictures as it shows in my version of Excel, I guess it will look somewhat different when you open
the file due to local date/time settings.
Appreciate feedback on what you find!
//Caj
https://skydrive.live.com/redir?resid=94DF9214E3A6D4!107&authkey=!AEuAXX_kPC7yKaI&ithint=file%2c.xlsx

Data manager package log does not show Global variables!!

Hello Experts,
We are using BPC 10 sp14 Microsoft version with SQL Server 2008 R2. We are seeing an issue where datamanager package log does not show the Global variables defined in package script whereas in BPC 7.5 Global variable were visible in package log.
Please let us know is this behavior changed in BPC 10?
Below is the package script having Global variables and Package log not showing any of them.
Thanks & Regards,
Rohit
Package Script:
Package Log:

Hi Ergin,
As far as I remember it's by design...
Vadim

Infoset BI - not showing created on - variable in a query

Similar Messages

Maybe you are looking for