INFOSET - Checkbox to enable field text in  additional field

Hi,
as in the title I've created a custom infoset based on a logical DB (HR).
I use to do that with SQ02 transaction.
The problem take place when I mantain/create additional fields, I assign the correct field reference but I see always the checkbox of ID Text not editable. For the help I'm in report SAPMS38O dynpro 0180.
I don't know if that is enough for a clear explanation.
Sincerely I don't know why.
Thanks for suggestions.

Hello,
in SAP standard program it is not possible to add field 'Text' in S_ALR_87012340 .
Sorry
Best Regards,
Richard Pillinger

Similar Messages

  • Text of additional fields on SAP query show blank

    Hi All,
    I'm encountered a problem when text of additional fields on SAP query is not working and it's show blank after HRSP is implemented.
    SAP_ABA : Rel. 701 Lvl. 3
    SAP_BASIS: Rel. 701 Lvl. 3
    SAP_HR: Rel. 604 Lvl. 8
    Below are the config that we have done before HRSP in table: TEXC_FLD_C and it's work perfectly.
    Table Name: P0000_AF
    Field Name: ZZAPPRATING
    Function Module: ZHRGYYFMPA_PDRATING_TEXT
    Exception Priority: 1
    Object Type Name: CL_HR_TEXT_IDENTIFIER
    During debugging, we found that program (Form: %_GET_PERAS) is retrieve text of additional fields based on structure P0000_AF. At this point, text of fields are successfully take place and filled. However, program try to retrieve the text based on structure P0000 again right after that. Due to additional fields are added on P0000_AF not P0000 and no ZZAPPRATING field found in P0000, hence program has cleared the text which filled in previously. This give the result, text is blank.
    Please advise, how should I get this resolved.
    Thank you very much.
    Best Regards,

    Please check this link:
    Re: query report
    I guess, it can help for your case too...
    Even this:
    Re: sap query infoset and fieldgroup
    Re: Additional field in SAP Query
    Kind Regards
    Eswar

  • Designing additional fields for CATS

    Hi,
    I want to add additional fields to CATSDB , but my question is whether the field name can be modified as per requirement and whether we can have list of values against these fields ?
    Regards,
    Ayesha

    Hi Ayesha,
    Yes you can add the fields to CATSDB,
    1. You need to add the desired field at CI_CATSDB Include.
    2. After that assign the field to the "Additional Fields" in the IMG and then to the profile.
    Yes you can have list of values to your field once you create the zfield's you have to create Data elements and domains for that, if you want the default list of values you need to maintain at Domain level in Further Characteristics.
    Regards,
    Mohsin.

  • Infoset (coding in additional field added )

    Hi
    I need some help regarding coding for the additional fields added to the infoset.
    As a data source I have selected a direct read from table MARA. I need to display the description in all languages for the material chosen on the selection screen when the Query is executed in sq01.
    I could have used a join between MARA and MAKT, but instead I have chosen to add an additional field
    with the head 'material description' and coded the select for the material description as per matnr in the coding section.
    The basic list display, only dislays one description, the last one and not all the possible descriptions in all languages.
    What should be the probable code and where should i place that code for such an implementation.
    Please suggest.
    Smriti

    You can do loading of master data text for achieving the material descriptions.
    Regards

  • Additional field added in Infoset unable to use as a selectable field

    I added 2 fields as additional fields to the Organizational Assignment infotype in a PNP Infoset that I created via SQ02.  When I select the infoset to build a query via adhoc query the fields are listed in the Org Assignment infotype and available for output but are not available as a selection field.  There is no check box under the Selection column, only a checkbox under the output column.
    How do I make the added additional fields available as a section field as well as an output field.

    Solution:  in ad hoc query select Extras > Switch off object selection

  • Additional field for Infoset in BI 7.0

    Hi
    I have created an Infoset with a cube and a masterdata object. Now my requirement is to have an additional field which i can not extend to cube or masterdata.
    Is it possible by any chance to add an additionla field to Infoset and write an abap code ?

    Any suggestions ?

  • Creation of additional fields in Infoset SQ02

    Hi Experts,
    I'm a FICO consultant trying to create a query.
    Requirement : Link RSEG Table to BKPF Table in the join condition
    Link: RSEG-BELNR concatenated with RSEG-GJAHR = BKPF-XBLNR
    Now I'm trying to create an additional field in SQ02 named MiroYear and in the field code part i gave the below piece of code
    "CONCATENATE RSEG-BELNR RSEG-GJAHR INTO MIROYEAR."
    It shows no syntax errors. I added the same to the field group as well.
    Issue: The additional field (MIROYEAR) is not appearing in the join condition in SQ02.
    Is this the right way to create an additonal field? Have i made any mistake? Or any of you have any better ideas to join RSEG and BKPF in SQ02?
    Your quick response will be appreciated
    Best Regards
    Vimal

    Hi,
    Table RESG and BKPF are linked BKPF-AWKEY.
    Now first of all if you create an additional field, that field will not appear in the join.
    One way will be to create an infoset with direct read to table RSEG, and then inside add additional fields for each BKPF field.
    Then in the code
    CONCATENATE RSEG-BELNR RSEG-GJAHR into MIROYEAR
    select single ....
    into (ADDFIELD1, ADDFIELD2, ADDFIELD3,.....)
    from BKPF
    where awkey = miroyear.
    Regards,
    Khusro Habib

  • Additional field in SAP Infoset - internal table

    Hi Gurus,
    I have invoices like:
    VBELN    Matnr     mtart
    1234           Ek21    MCFE
    1234           Ek33    MCFE
    1234            Ek29    MCFE
    1234           321       MRM1
    1235          EK11      MCFE
    1235           EK17      MCFE
    3212           EK23      MCFE
    3212           EK33       MCFE
    How can create additional field in SAP infoset, what show in every line in invoice, that invoice have line with  mtart = u2018MRM1u2019 or mtart <> u2018MRM1u2019. Aim is to filter invoices with line mtart = MRM1
    VBELN    Matnr     mtart         result
    1234           Ek21    MCFE        1
    1234           Ek33    MCFE         1
    1234            Ek29    MCFE        1
    1234           321       MRM1        1
    1235          EK11      MCFE        0
    1235           EK17      MCFE       0
    3212           EK23      MCFE        0
    3212           EK33       MCFE       0
    How can create additional field in SAP Infoset?

    Hi Have you had any luck on this?

  • Additional field in infoset as string

    Hi,
    Is it possible to add an additional field in an Infoset with type string?
    When i'm creating it, I need to fill the definition of the field, with a certain type or with reference to some table field, but I'm not finding any suitable to here of type string. I always get an error "you must use a flat structure" or "you cannot use internal tables, strings, references, or structures as components".
    This means I cannot create an additional field as a string?
    Thanks in advance for your help.
    Best regards,
    Sónia Gonçalves

    Thnks for answers ,
    I have just do that but there is no hided field . I haven't see the additional field  there already.
    I think it 'll more clear if  I tell about what am I doing step by step ;
    First , I created infoset in SQ01 with joinig tables LIKP -  LIPS .Then I added some additional field ; I collect different value from another table . Then I create field group called " ADD" in infoset and assigned additional fields that I created to "ADD " . Finally generate and saved infoset .
    Second , in RSO2 I create data source and joined with infoset . Then comes to selection filed screen .  Here was my problem ; there were no field that I added to infoset ,additional fields didn't appear
    Can I  explain it ?
    Thnks for help ..

  • Populating Additional Field in InfoSet Query

    Hello,
    My team and I are working on generating a relatively simple report from the VBAK (Sales Header), VBAP (Sales Items) and VEDA (Date data) tables.  We would prefer to be able to build an InfoSet (SQ02) and Query (SQ01) instead of writing a custom report.
    The problem is the VEDA table contains data that may link to the VBAK and sometimes the VBAP table.  The usage is that the header has begin and end dates for a contract, which is denoted by a blank value in POSNR field in the VEDA table.  If a particular line on a contract has different dates than the header, there will be an additional record in the VEDA table where the POSNR value matches the POSNR value from the VBAP (Item) record.
    The link to the VBAP table is straight forward being keyed off of the VBELN (doc number) and the POSNR (item number) fields in both tables.  However, there's isn't a POSNR field in the VBAK (header) table and the VEDA table shows this as a blank value in the POSNR field.
    The simplest thing I can think of doing is link the VEDA table to the VBAP and let it retrieve all the exact matches on Sales Doc & Item Number but add two "Additional Fields" to the Query that would represent the Sales Header begin and end dates.
    I know how to add an additional field but how would you "re-query" the VEDA table and under which option under the Code tab.
    Thanks

    Hi Alex
    Please see if below example helps you to understand:
    Supposing, we are displaying material description within our query.
    1. So we define the join with MARA & MAKT while creating infoset in transaction SQ02.
    2. We create feild groups to identify the fiels we use for selection and display.
    3. Here after selecting language key from MAKT, by default this will take SY-LANGU always for the case.
    4. To make it applicable for different languages we can code in INITIALIZATION Event.
    5. To do so we can do it by two options: Use menupath: Goto->Code->Initialization
    i) First option using variable: <b>MAKT-SPRAS = SY-LANGU.</b>.
    ii) Second option using Parameter-Id: <b>SET PARAMETER ID 'SPR' FIELD SY-LANGU</b>.
    6. Save & Generate.
    Now when we execute the query, we are defaulting the language as System Language.
    Hope the above info helps you for better understanding.
    Kind Regards
    Eswar

  • Currency as additional field in an Infoset

    Hi,
    I hope you can help me with the following problem. I want to extend an infoset with additional fields amount and currency. When I do this and want to use these fields in a query the system automatically generates to my amount field a currency field, so in the end I have one amount and two currency fields.
    I tried to fill these generated currency field but then I get a short dump using this infoset in the segment builder as this variable is not existing there. Well, of course I can solve it with my additional currency field, but then I have two currency fields to one amount field, as one is always generated.
    Is there a solution for this?
    Kind regards,
    Timo

    Hi Pablo,
    I guess you would have forgot to drag that extra field to the "Field Group/Data fileds" list ( on th eRight hand side pane ) in Tcode SQ02. Please check.
    Save the infoset and then saev the datasource, then check the RSA3 extractor check.  also make sure to replicate the datasource.
    Regards,
    Pratap Sone

  • Adding additional fields to an Infoset Query

    Hi Experts,
    I have added a couple of additional fields to an infoset query using SQ02.
    I have also written code for filling in the fields.
    I have also added them to some Field Groups.
    Despite this, when I run the query, they are not being displayed in the output list.
    What could be the reason for this?
    Kindly help with your inputs.
    Thanks in advance.
    Regards,
    Keerthi

    goto sq01,
    give the query name...
    goto change.. just below output, you have a drop down for field group and field catalog. select field catalog.
    select the fields you want to show in output

  • Additional field "SYHR_A_P0105_AF_CELL" doesn't work in InfoSet

    Hi experts,
    I am trying to make a SAP query base on logical database PNP, what I did:
    1. create a infoset base on PNP, selected infotype 0105
    2. create a query base on the infoset, chose field SYHR_A_P0105_AF_CELL and SYHR_A_P0105_AF_EMAIL
    The email field works, but the cell phone field output no value.
    what's the secret behind the additional fields? How was the data is read from backend tables?
    Thanks a lot.
    Robin

    Robin :
    These pre-defined additional fieds for IT0105 are auto-populated through SAP function 'RPAQ_GET_AF_0105'. Therefore, if you use SAP standard subtype 'CELL' instead of custom subtype, additional field 'SYHR_A_P0105_AF_CELL ' would also be populated.
    However, if you decide to use custom subtype for it, when in this additional field, right click on it - select 'Field Code', and key in your own logic to have this field populated instead.
    Rgds.

  • Add color to an Additional Field inside a SAP Query (Infoset) in ALV

    I made an Infoset (transaction SQ02) out of table MARC. I created an Additional Field called "STATUS" which I coded to get a value of 1 or 2 depending on the value of another field in MARC.
    How can I make this cell in the resulting Query to appear in different colors depending on the value? I found the command "FORMAT" but that doesn't work on SAP List Viewer (ALV) mode.
    This is what I coded in the additional field called STATUS::
    clear: STATUS.
    if MARC-DISPO = 001.
      format intensified color = 6.
      move '1' to STATUS.
    else.
      format intensified color = 7.
      move '2' to STATUS.
    endif.
    The coloring didn't work. What ABAP command should I add to this additional field to make the coloring of the STATUS cell work under ALV mode?

    field catalog and layout are saved into database aqrdb
    just before displaying the results into ALV table, they are retrieved by function RSAQRT_ALV_DISPLAY which does
    concatenate rtmode-act_report sy-langu into l_srtfd_pattern.
      import fieldcat = fieldcatalog
             layout   = layout
             sort     = sort
             from database aqrdb(lv) id l_srtfd_pattern.
    so in order to display some cells with a different color, you have to
    - add an additional field that will contain the color codes of cells
    - set values in this field at record level (field is a table of type LVC_T_SCOL)
    but also adapt the layout in order to set the field as containing the colors
    - put the name of this field into layout (CTAB_FNAME)
    - export layout to corresponding entry of aqrdb
    this part I don't see exactly where to put it, I guess there is some place where it is possible to manage the layout - if not then you have to do it "manually" i.e. with a small report

  • Adding additional fields to an existing Infoset.

    Experts,
    I got a requirement to add additional fields to an existing info set which belongs to different Logical Data base.
    The existing info set is based on PNPCE LDB and the fields are from PD (i.e PCH ldb).
    Please let me know hw to add those fields...
    Thanks,
    Shrini

    Hi Shrini,
    You can add fields from PD infotypes (1000-1999) to a PNPCE infoset if the object has a relationship to a Person.  Example would be Position which has the relationship Holder.  You go to Change the Infoset.  Edit --> Change infotype selection.  Scroll down to the bottom and open Infotypes of Related Objects.  Open Position.  There you will see the possible relationships between a Position and Person.  Select Holder.  There you have the list of infotypes assigned to a Position that you can add by checking each.  You can then add whatever fields are in that infotype to the Infoset. 
    Problem comes in if there is no direct relationship between a Person and the object - such as Job that you want to include in the Infoset.  A Job describes a Position and a Person holds a Position, but a Person does not have the direct relationship to the Job except as a Dislike or Successor.    In this case you would need to create a new PCH Infoset with the root object Position.  Then using the relationships between Position and Job and Position and Person, you can access the infotypes from PA as well as PD.
    Paul

Maybe you are looking for