Infoset Creation in BI 7.0 with 2cubes , 1 DSO and a Master Data oBjects

Hi Experts,
I have a requirement:
To get the Work Order Activity from PM, and their corresponding Work Order numbers, Cost Centers and the Amounts associated from CO module like CCA and WBS6 datasources.
I thought about this solution:
Link the 0PM_C03 with the MD- 0PM_ORDER as a left outer join
and inner join 0PM_C03 with ZTXN_O01 - DSO(based on 0CCA9DSO) and Innerjoin to the ZWBS_C20 .
Is it ok to include 2 infocubes ,1 DSO and 1 MD object in an Infoset. Performance may be worst.. but i cannot think of any other solution.........
Multiprovider does not solve my purpose as it gives 2 records when you identify Work Order number in PM and CO modules. By using an Infoset we can link WO in PM to WO in CO.
Please guide me.....
Regards,
Bala

Hi Bala,
Typically PM data sources are very high volume. Using InfoSets can lead to serious performance issues, as well as duplicates (especially for time dependant objects).
Have you tried using the Analysis Process Designer. There is some ways that you can filter data and have a better performance based on your selection criteria.
Kathleen

Similar Messages

Infoset on two Master Data Objects

Hi,
I have two Master data objects one is time dependent ZABC and another master data object 0Material.
Currently I have a report on ZABC which is time dependent master data object which is built on complex logic to get the data.
There is a time interval variable in the selection list.
Business does not allow me to modify the time dependent master data (ZABC) that means to add new attributes division and Material deletion flag.
The ZABC object does not have Division and Material Flag for Deletion attributes.
The business requirment is to add Division and exclude materials which are marked for deletion as 'Y' to the existing report.
Since Division and Material Flag for Deletion is not there in ZABC, I have gone for Infoset between time dependent master data object and 0Material and did left outer join (which pulls all the records from time dependent master data object) and the join condition is Material.
I built new report in query designer exactly like the current report.
When I run both the reports , the newly developed report is not pulling exactly the same records as the current report.
New report is pulling extra records. I mean the new report should pull only the records which are in the time interval.
This is the issue. Please help in this regard.
Thanks
Madhav

Hi,
I could resolve the issue.
Thanks & Regards,
Madhav

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

My ipad mini is disabled. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup.

my ipad mini got disabled due to my little sister who used the wrong password. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup. help me please!

Once disabled, you have to restore/recover the iPad before you can use it.
You will lose your data.

BUPA creation from customer and Vendor Master data in R/3 - Urgent!!

Hello All,
Firstly I am posting this query in this group to figure out a way to achieve this functionality of integration and moving Business Partners.
<u>Requirement: </u>On creation of every Customer or Vendor in R/3 we need to create a Business Partner in cProject, I have been told this could be achieved with the ALE functionality,
My guess would be to for every customer or vendor created in R/3 by User-exit create Business Partners by organization in R/3 and through ALE or BAPI create the same BP's in cProjects, I really need help in getting this solved,
Please advice me if I am missing something.
Thanks
Praveen Kumar

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

Debugging codes with eclipse, WL Portal and WL Liquid Data

Hi,
I'm using eclipse as IDE and Lomboz as WL Server dedugging plug-in. WL Portal
is installed on WL Server and WL Liquid Data Server is deployed on WL Portal.
I created a Lomboz J2EE project that is connected to my domain. When I clicked
on "Debug Server" on the IDE, I got an error, "License is not found or invalid".
The error was as follows.
Server Info (Management) 1-4-1-100: Starting Server.
Server Error (Management) 1-4-1-102: Server cannot be started. (License invalid
or not found.)
java.lang.Exception: License invalid or not found.
at com.enosysmarkets.xmediator.initdb.InitDBF.init(Unknown Source)
at com.enosysmarkets.xmediator.Mediator.initialize(Unknown Source)
I would appreciate it, if anyone could share the same experiences if you had with
me.
Thanks in advance,
Tony

We were able to use the LDControl from Page flow.
Using it directly in JSP page gives the security exception.
- vineet

How to syncronize changes in secondary Master data objects with Primary?

Hi Gurus!!
I am working on a requirement in which I have to create a custom repository for EQUIPMENT master and EXCISE master.
There are Material,Vendor,Customer,Equipment,and Excise master repositories in the server.
Excise master deals with determination of excise rates based on Material and chapter Id combination,also its required to have upto date Vendor and Customer details in the Excise master repository.
The Equipment master on the other hand requires updated Material records,which are available in separate Material repository.
It can be done through-
->Multiple Main Tables
->API's fetching records
Please guide me how to go ahead and which is the best way?
Thanks,
Ravi

Hi Ravi,
I just want to know that you have to maintain two custom repositories i.e. EQUIPMENT master and EXCISE master.
Or is it ok with one repository.
Why i want to know is becuase if you create two custom repository then you have to maintain material data two places i.e. in both repositories.
If it possible that only repository can work then you can go with one repository with 5 maintables.
But every thing has pros n cons .
Pros:
data storage is less
cons:
so if you go with one repository so in this case user load only on one repository becuase if user interested in vendor or customer or material they will log in same repositories and hence there is more chances of server downtime.
you can go with multiple repositories one for each .
pros
With this no more load on one repository.
cons
in this approach you have to do the syndication btw repositories to get upto date data and storage needs more as some common data maintain in different repositories
So i would suggest that
You can go with multiple maintable IF
1.1 individaul repositories donot have so many users i.e. vendor ,material and customer repositories donot have so many users then put all in one repository so that we can maintain data at one place.
Different repositories is also good option if all three repositories have so much load and you can get upto date data through syndication .But in this approach if you need all fields from three repositories then it would be a waste of storage and if you need ony some information from these repositories then this is good also.
Please inform us abt what is feasible for you so that we can make the solution more simple.
Thanks,
Sudhanshu

Replacing DSO with InfoObject for storing time-dependent master data

Hi Gurus,
currently I am storing time-dependent contract items in a DSO. The posting items are enriched with this master data as well as some other transaction data into another consolidated DSO, which includes the time-dependency (valid from & valid to) as well for better performance. But this means that we will have a large number of records, because 1 new posting item could end up with few posting items more due to the versions of contract item.
Since there are many posting items (>50 millions yearly, daily peak 1-2 million) and the complexity with delta management, I am considering whether to use an InfoObject for storing the contract items. The number of contract items are not many, about 300,000 after migration and about 10,000 each month.
Hence, I would like to ask whether this approach is feasible? Is there a size limit for a master data InfoObject?
Thanks in advance.
Regards,
Meng

hi,
The Time dependent MD object will create the same number of records for the contract item (maybe more) as each contract item will have different record for different time frame.
this can be better explained with example.
let us say you have 1 contract item with 2 entries one valid from 2007-2008 and the other from 2008 onwards.
In DSO this will create 2 records, in time dependent MD object it would also create 2 records.
In the infopackage for the MD you would need to provide the interval (time range) for the MD.
if you provide it as 2007 till 2999 then two records will be created one with 2007-08 and other valid from 2008-999.
However as there would be other contract items which would have lower date say 2006 then this contract item would create 3 rows, 1 row for 2006-07 with blank values, 2nd for 2007-08 and 3rd for 2008-999. This way it has more number of records than the DSO.
In case of MD object you may not be able to delete data as well in future if the object is used in some other place.
There will be many pros and cons of the approach you are thinking and you would have to weigh them and decide.
regards,
Arvind.

I hav som problem with my appstore n ibook dey just dont load i thought i need 2 upi date but now in mavericks updates r connected with appstore it opens up but it doesnt load sam with my ibook app and ye my date and time is fine any solutions?

i have some problem with my appstore and ibook they just dont load thought i need to update but now in mavericks updates are now connected with appstore so i cant do that it opens up but doesnt load just blank same with ibook store it says cannot connect and yea my date and time is fine any solutions?

Hi, James.
Yes, the iBook should run even with no battery installed.
These are the four most common possibilities when the battery will not charge:
(1) there is something wrong with your battery
(2) there is something wrong with your power adapter
(3) there is something wrong with your power input board (the part that contains the port where you plug in the adapter)
(4) there is something wrong with your logic board
Since you have eliminated all the possibilities except (4), it is likely that your logic board is having problems. The PMU (Power Management Unit) is part of the logic board, and it may be going out (hence, temporarily working again when you reset it). Since the iBook is not running reliably without the battery in place (as it should), replacing the battery most likely would be futile.
When a computer gets to be five years old, it seems a bit short-sighted to pay very much for repairs, just to have something else go wrong sooner rather than later. Have you had a look at the hugely improved specs on the new MacBooks? Is it time for a new portable to avoid embarrassment during your presentations? It sounds like that could be your best option.

Problem with adjusting both transparency and color of an object

I am writing a program where when an object is picked, both it's transparency and color will be altered (the object will become opaque, and its color will turn to a predefined "selected" color), while the previously selected object will return to its original transparency and color. I am able to get this to work, except that objects that were picked two or more picks ago will remain in the selected color, albeit in their original transparency. This problem only seems to occur when transparency is factored in. The picking/color & transparency altering code is as follows.
public class PickingListener extends MouseAdapter {
     private PickCanvas pickCanvas;
     private TextDisplay overlay;
     private Primitive p;
     private Primitive lastP;
     private ColoringAttributes origColor;
     private TransparencyAttributes origTransparency;
     public PickingListener(PickCanvas pickCanvasArg, TextDisplay overlayArg) {
          pickCanvas = pickCanvasArg;
          overlay = overlayArg;
     public void mouseClicked(MouseEvent e) {
          pickCanvas.setShapeLocation(e);
          PickResult result = pickCanvas.pickClosest();
          if (result == null) {
               System.out.println("Nothing picked");
          } else {
               p = (Primitive) result.getNode(PickResult.PRIMITIVE);
               if (p != null) {
                    setSelectedColor();
                    overlay.setPickedBarInfo((BarInformation) p.getUserData());
               else
                    System.out.println("null");
     private void setSelectedColor() {
          ColoringAttributes barCA = new ColoringAttributes();
          TransparencyAttributes barTransp = new TransparencyAttributes(TransparencyAttributes.NICEST, 0.0f);
          barCA.setColor(ColorConstants.SELECTED);
          if (lastP != null) {
               lastP.getAppearance().setColoringAttributes(origColor);
               lastP.getAppearance().setTransparencyAttributes(origTransparency);
          origColor = p.getAppearance().getColoringAttributes();
          origTransparency = p.getAppearance().getTransparencyAttributes();
          p.getAppearance().setColoringAttributes(barCA);
          p.getAppearance().setTransparencyAttributes(barTransp);
          lastP = p;
}Capabilities to alter the primitive's color and transparency are all set.
     barAppearance.setCapability(Appearance.ALLOW_COLORING_ATTRIBUTES_READ);
          barAppearance.setCapability(Appearance.ALLOW_COLORING_ATTRIBUTES_WRITE);
          barAppearance.setCapability(Appearance.ALLOW_TRANSPARENCY_ATTRIBUTES_WRITE);          barAppearance.setCapability(Appearance.ALLOW_TRANSPARENCY_ATTRIBUTES_READ);
ColoringAttributes barCA = new ColoringAttributes();
barCA.setCapability(ColoringAttributes.ALLOW_COLOR_WRITE);
barCA.setCapability(ColoringAttributes.ALLOW_COLOR_READ);)
Any insight as to why this would occur would be greatly appreciated.
-Adrian Benton

A Behavior is the preferred way to make changes in a scenegraph. Here is an example from a previous post that changes the appearance of a shape when it collides with another shape.
The javadoc for javax.media.j3d.Behavior appears to refer to the issue you have.
Transparencies are confusing, different display adapters deal with them differently. Suggest you search the forum at
http://forums.java.net/jive/forum.jspa?forumID=70
for more detailed information.
regards
class CollisionDetector extends Behavior {
private static final Color3f highlightColor = new Color3f(0.0f, 1.0f, 0.0f);
private static final ColoringAttributes highlight = new ColoringAttributes(
      highlightColor, ColoringAttributes.SHADE_GOURAUD);
private boolean inCollision = false;
private Shape3D shape;
private ColoringAttributes shapeColoring;
private Appearance shapeAppearance;
private WakeupOnCollisionEntry wEnter;
private WakeupOnCollisionExit wExit;
public CollisionDetector(Shape3D s) {
    shape = s;
    shapeAppearance = shape.getAppearance();
    shapeColoring = shapeAppearance.getColoringAttributes();
    inCollision = false;
public void initialize() {
    wEnter = new WakeupOnCollisionEntry(shape);
    wExit = new WakeupOnCollisionExit(shape);
    wakeupOn(wEnter);
public void processStimulus(Enumeration criteria) {
    inCollision = !inCollision;
    if (inCollision) {
      shapeAppearance.setColoringAttributes(highlight);
      wakeupOn(wExit);
    } else {
      shapeAppearance.setColoringAttributes(shapeColoring);
      wakeupOn(wEnter);
}

Test creation of hr master data/objects

Hello,
in my programm i need to create some objects(training events, groups, types, locations,..)/infotypes. I would like to offer to enduser some "testing/simulation" behaviour - the infotypes will not be stored in database at the end of processing. So i wanted to use parameter vtask = 'B' - buffer of FMs RH_OBJECT_CREATE and RH_INSERT_INFTY and at the finish of procces call FM RH_UPDATE_DATABASE in case that the user wants to store information, in other case call this fm with parameter CLEAR_BUFFER       = 'X' to clear this buffer. But when i was making some test the bufer was not cleared and the objects were created after calling this fm at next runs of programm.
So my question is: how should i clear the buffer?
Thanks,
JJ

The following function calls might help..
RH_CLEAR_BUFFER
RH_DELETE_BUFFER
RH_PM_INFTY_BUFFER_REFRESH
~Suresh

DMS link with Purchase order,invoices and material master

Hi, all,
Here is my ?
Can we link incoming material invoice with purchase orders for reference purpose throught DMS.
rgds,
ben

hi
you can link the objects through object link in dms.
go to tcode dc10 select the documnet type, click on define object link. click new entry and select object type as EBAN/EKPO
this way dms is link to purchase order.
thanks ,
regards,
nitin
award point if useful

Itegration with Websphere Message Broker and Customer Master IDOC

Hello All. I am new to this forum. I have a couple of questions.
What I am trying to do: I have to interface to SAP with Websphere Message Broker which has inbuilt nodes to interface with SAP using BAPI or ALE to send Customer Master Record (create/update/delete)
The questions I have:
1/ Has anyone done this? What did you use BAPI or ALE?
2/ When a Customer Master IDOC is sent to SAP, if successful, a return code is sent back by SAP. This indicates that SAP has received the IDOC successfully. However, our requirement is that we have to know whether the IDOC was successfully posted within SAP. I am of the opinion that this is manual task within SAP and it should not be the function of the middleware layer as its responsibility is only to successfully deliver the IDOC's. I would welcome opinions on this issue. Please let me know If there is a way to determine if the IDOC has been successfully posted in SAP.
3/ Is there anywhere where I can get an XML representation of the Customer Master Record. I want to see the structure and the available fields. How can I get this info from SAP?
Thank you

Hi;
Similar issue has been answered at -Steven Chan blog*
From blog:
Hello, RM,
I have not seen any Oracle-produced documentation along those lines. I don't think there are any Oracle teams that are investing in producing documentation for IBM WebSphere.
I would suggest contacting IBM to see whether they have produced any WebSphere-specific documentation.
Regards,
Steven
Referance:
http://blogs.oracle.com/stevenChan/entry/ebusiness_suite_release_1211_now_available
Ps: You can rise SR for your issue also
Regard
Helios

Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Infoset Creation in BI 7.0 with 2cubes , 1 DSO and a Master Data oBjects

Similar Messages

Maybe you are looking for