Infoset data grouping for SAP Query

Hi,
I'm pretty new to SAP R/3 (4.7) and have a query that I think relates to Infoset rather that SAP Query.
I have two tables to join but the right hand table (it's a left outer join), needs to be summarised to reduce to unique records on each side of the join. In SQL Plus I would use a 'Group by' to perform this function .. is there a simple way to do this when building the Infoset ?
I am not an ABAP programmer, nor do I have access to ABAP so would prefer not to go down this route unless it's the only way.
Any assistance would be appreciated.

Hi Guys,
Any ideas?

Similar Messages

  • How many ways we can create authorization for user groups in sap query reports

    Hi Gurus, I am getting a problem when I am assigning users to user group in sap query report .The users other than created in user groups are also able to add &change  the users .So please suggest me how to restrict users outside of the user group.
    Please send me if u have any suggestions and useful threads.
    Thank You,
    Suneel Kumar.

    I don't think it can be done. According to the link below 'Users who have authorization for the authorization object S_QUERY with both the values Change and Maintain, can access all queries of all user groups without being explicitly entered in each user group.'
    http://help.sap.com/saphelp_46c/helpdata/en/d2/cb3f89455611d189710000e8322d00/content.htm
    Although I think you can add code to your infoset and maybe restrict according to authority group, i.e.:
    Use AUTHORITY-CHECK to restrict access to the database based on user.
    Press F1 on AUTHORITY-CHECK to find out how to use it in the code

  • Transaction code for SAP query reports

    Hi All,
    I am trying to create transaction code for sap query report but couldn't go further.
    1) Created User group in SQ03
    2) Created infoset in SQ03 and assigned that to the user group
    3) Created query in SQ01 using the infoset.
    I executed the report in SQ01 and it is working fine.
    Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
    Assign transaction code to SAP Query (created via SQ01)
    But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
    Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
    Thanks in advance

    HI,
    based on the thread you've already mentioned:
    In SE93, Create a Paramter Transaction
    -> Transaction = Start_report
    -> In default values, give the below details:
    D_SREPOVARI-REPORTTYPE = AQ
    D_SREPOVARI-EXTDREPORT = Name of the Query
    D_SREPOVARI-REPORT = User Group
    So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
    best regards, Christian

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • Issue in transaction code creation for sap query report .

    Hi  Gurus,
    I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
    1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
    2) By using parameter transaction options in start object of se93
    What are the difference between creation of these two ways. Please specify  the advantages and disadvantages of both methods.
    Regards,
    Suneel Kumar Uggina.

    Hi Jogeswara Rao,
    But I am getting problem while transporting form development system to  the production system. After transporting to Production system  I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And  I would like to know  on what conditions should I have to  use the First one  and as well as a second one in sap query reports.
    Thank You,
    Suneel Kumar Uggina.

  • Require TCode used by user for sap query created through SQ01

    Hi All,
    I have number of SAP Query in production that currently are used by different-2 user & created through SQ01
    My question is how to know the TCode that used by user for SAP Query.
    Thanks In Advance
    Regards
    San

    Charlie
    You did not get the question.
    I knew the TCode of the query which I had created using tcode SQ01. user is using this query to see the report
    Like I created query named 'order_line_details'. This query is basically to see the order & other details. To use this by user one TCode'zncv_ord_item'  has been created.
    So in the system lots of query are available. So i want to know the Tcode for those query that are using by user.
    Thanks in advance
    San

  • Transport request for SAP Query - SQ01, SQ02, SQ03

    Hi Experts,
      I have a doubt, Whether we can have request for SAP Query which have created from Transaction SQ01.If Yes then How to do that....?
    Thanks in Advance,
    Chetan Joshi

    Hi,
    Use the program RSAQR3TR
    Thanks
    Naren

  • Request for sap query

    can u tell me how to create a transport request for sap query

    i  dont know the exact way to create the transport request but i have done by this way.
    after creating the query come out and go to se38 by default it will show a program name like asbksll------- like this  and now i have copied it to one z program and transport it.
    it may solve your problem.
    regards
    shiba dutta

  • Fieldes planned delivery date and actual good recipt date for SAP QUERY

    Hi Gurus
    I am changing sap query. I need to find two fieldes  : planned delivery date and actual goods recipt date
    I dont know MM tables, do you know wrhere are?
    in table EKPO i don't find the fieldes.
    Thanks in advance

    Thank a lot!
    Regards

  • Default value for SAP Query - SQ01

    Hi Expert,
    I made a query for GL master data, and I have a selection criteria on chart of account, but since the chart of account for all company codes are same; therefore I would like to default the chart of account selection criteria to my COA.
    I read through question/answer in the following thread: SQ01 - restriction on Infoset but solution given by Lalitha Manda ... I cannot get the given selection path.
    Kindly advise, and I am using ECC6.0.
    Thanks,
    sbmel

    Hi,
    You need to go to the infoset of the query (transaction SQ02), or in SQ01, after input of the SAP Query, click on 'Infoset Query'.
    In the right frame You will get a list of fields for selection. There You can default the value of selection field GL Account in the column 'Value'.
    Regards,
    Birendra

  • Translation for SAP Query

    Hi,
    Is it posible to change the texts for coulmn in the report (ALV Grid) created though SAP Query (SQVI)?
    Ex: if the Column has Number -> it should be changed to Nummer. This will be done based on some conditions.
    Thanks,
    Prashanth

    Nummer = German?
    Did you translate the (custom?) data elements and  log in German?

  • Tcode for sap query

    hi experts,
                   Pls let me know how to create a tcode for a SAP query .I am using infoset query for combining two tables.I have created a query and the report is working properly .now i need to create a tcode for end users to work on it .when they enter the tcode it has to go to the selection screen ie variant part of my report.

    Hi,
       Go to se93 and select the create button.  You will then be asked to writed down the tcode of your choice then create a short text for that tcode. Select the 2nd option button w/c is the "Program and Selection Screen (report transaction)."  Press enter.  Then key in the program name and the variant you saved in the program.  When transporting to Prod, Save the variant there as well.  If you placed "DEFAULT" in the creation of tcode, you should also save "DEFAULT" variant in production.  Hope this helps.

  • Steps for creating T.code for SAP Query

    Hi Friends,
    I have developed and SAP Query through SQ01, i want to assign an T.code for that.
    What are the steps we have to do in SE93.
    Regards
    Kumar M

    Hi
    Create a report pgm with the following code & create a T.Code for this pgm in se93.
    data: gv_test type sy-repid.
    DATA: GV_USERGROUP TYPE AQADEF-BGNAME VALUE 'FI',
          GV_QUERY TYPE AQADEF-QUNAME VALUE 'ZCON_FI_QUERY',
          GV_RNAME TYPE AQADEF-PGNAME .
    CALL FUNCTION 'RSAQ_REPORT_NAME'
      EXPORTING
        WORKSPACE        = ''
        USERGROUP        = GV_USERGROUP
        QUERY            = GV_QUERY
    IMPORTING
       REPORTNAME       = GV_RNAME
    * For the dynamic excution of the called query assisgn GV_RNAME to <gv_test>.
    gv_test = GV_RNAME.
    submit (gv_test) via selection-screen and return.

  • Question on creation of t-code for SAP query

    Hello,
    I posted a thread in here back on 06/20/2007 asking for help on creating a t-code for a SAP query. one of the responses that I recieved was
    <i>"Sure, all you need to do is get the report name which is generated by the query. You can find this in SQ01, select the query and from the menu, Query, More Functions, Display Report name. Then go to Se93 and create the tcode with this report name."</i>
    the report name was AQFKZFINANCE====GL_FRANCE=====.
    I created the t-code using this name. I had it transported to my QAS system an now we are getting a error stating that the the program is not found.
    When I check in SE38, I can see this program AQA0ZFINANCE====BP_RECON====== in both my development system and my QAS system.
    Should I have created in the t-code using the AQA0ZFINANCE====BP_RECON====== instead of the AQFKZFINANCE====GL_FRANCE===== program? 
    Is there any reason why the program AQFKZFINANCE====GL_FRANCE===== would not be in QAS?
    I do not have access to SQ01 in our QAS system so I cannot perfrom the process stated above.
    thanks in advance for the help.

    Hi,
    Please check this thread perhaps it may help.
    Re: How to create TCode for Sapquery
    Regards,
    Ferry Lianto

  • Create documentation for sap query

    Hello,
    I have created a sap query with sq01 and I want to create also documentation for it.
    I go from se38--> select the program and then change documentation,
    but the documentation button is grey.
    Thank you!

    Hi,
    Check this below link
    http://help.sap.com/saphelp_nw04s/helpdata/en/4f/83a6302fe1403db4289e2ac60b800a/frameset.htm
    Regards,
    Jyothi CH.

Maybe you are looking for