Infoset data issues need help ASAP

Hello BW experts,
I have created an InfoSet, to read data from one Single ODS. The ODS has already data active, but the Query on infoset doesnt returns any data.also i checked in listcube `without any success.
Could you please advise me where it might be wrong. i didn't changed anything in infoset. Just created a Infoset on top of ODS.
I tried all the options and made sure that it's not authorization issue.i deleted the ods data and loaded some test data and tried to create a query on ods it's fetching the data but no data pulling by infoset.
something wrong inbetween infoset and ods. could you please advise me what might be wrong and how can i resolve.
might be some issues with the generated program or some issue with the database level.
some of the infosets i created fectching partial data , some are getting full data from ODS and some of the infosets not at all picking the data. Overall i have created about 80 Infosets.
We are in BW 3.5. Recently upgraded the patch successfully.
Looking forward for your precious advise.
Thanks,
Naveen Reddy

just tried to go through it again, and it was close to finishing, less than a 1/2 hour left. and it got the error: "the installer is experiencing errors installing onto "Macintosh HD". The disk may be damaged, please try installing on another disk."
does that mean i'm going to have to buy a new internal hard-drive? once again any advice will be really helpful. Thanks
p.s. I also went and verified the disk again and it said there wasn't any issues with it. and i repaired it anyways and it said it was fine. This is super annoying
Message was edited by: Doonyal

Similar Messages

Stuttering flv playback issue- need help asap

We need help asap. Have a project is due to deliver today (5/14).
We have a video to go on a dvd-rom, live action with Motion Graphics behind.
When output is done thru Projector the Motion Graphics stutter as they scroll.
Here is more technical info:
Stuttering flv playback issue:
Prores 422 timeline 29.97fps 1280x720 output from fcp using current settings.
Mov file is approx 7gb, plays relatively smooth on a mac pro with no raid.
Frame by frame analysis shows all frames are present with no jumps tears or skips.
Tried several output paths, programs and settings to create a smooth flv file to no avail.
We adjusted data rates from 2k, 3.5k, 4k and 8k, no luck
We adjusted keyframe rates from low to all frames, no luck.
We tried cs3 flash encoder, cs5 media encoder, squeeze ect, same results.
Playback in the flash projector seems to choke slightly no matter what we do.
Have also posted in the Director Forum.
Any help much appreciated!

Here are a few ideas off the top of my head:
Try playing the file using a different xtra, sometimes different ones will work better. If you have Director 11.5, there is a native flv playback xtra.
You can build a player easily in Flash using the flvPlayback component, then bring that into Director as a swf.
Once you have the video in Director, try making the member Direct To Stage (DTS). If it is already DTS, try making it not DTS.
Make sure the video is not transparent, and nothing in Director overlaps the video... in fact, when the video is playing, nothing should be moving at all, and try to keep the amount of code that is running to a minimum.
Try lowering your video's data rate further or try using a different codec.
Using VBR (Variable Bit Rate) compression often makes the video appear to play smoother.
Try compressing the flv with different software. FFMpeg, for example, is free and does a very good job, often better than the Flash Video Encoder that comes with Flash/Creative Suite.

Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
Doc

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

Big sync issues, need help ASAP

All
So my phone wasn't syncing properly and was stalling on the transferring purchases from phone to itunes. After much trying I decided to remove the 'App' part of the sync so that it would bypass (or so I thought) the apps and continue to sync back up. Instead I lost all apps. Fine I thought, I'll just re-tick the 'App' part of the sync and jobs a goodun, expect I have all apps back on phone but with the word 'Waiting' at the bottom of each and my phone only ever wants to re-introduce them one or two at a time before freezing on the 'Copying App 1 of 54 from iTunes to iPhone.
Fine I thought, my most recent back up was only last week, I'll just restore and take it back to then, except everytime I do that it times out and asks me to check connections. I'm also worried that if I restore, it will have the same problem in re-introducing the apps back.
I've disabled antivirus whilst attempting this, but its starting to annoy me and I need it back to how it was.
Any advice?
PS - iPhone 4 using latest iTunes and IOS update

Try to restart your computer and/or reboot your iPhone again.
Make sure that when you transfer your purchases, leave your computer and iPhone ALONE.
I hope this helps!

Date issue, need help on this one.

Can anyone show me the proper ways of how to update the SQL date type?
I can't insert records into table because of the "date" problem.
Thanks in advance.
Yee Hiong.
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
import javax.swing.*;
class Personal extends JFrame{
      inpPanel1 inputPanel;
      btnPanel1 buttonPanel;
      dtPersonal data;
      Date dobDate, djDate; // this one... causes problems.
      String uri;
      Connection conn;
      Statement stmtAppendTable;
      ResultSet rs;
      public Personal(){
              super ("Personal");
              Container c = getContentPane();
              c.setLayout(new BorderLayout());
              inputPanel = new inpPanel1();
              buttonPanel = new btnPanel1();
              buttonPanel.btnSave.addActionListener(new ActionListener()                   public void actionPerformed(ActionEvent ae) {
                              openDataBase();
                              appendRecord();
                              closeDataBase();
              c.add(inputPanel, BorderLayout.CENTER);
              c.add(buttonPanel, BorderLayout.SOUTH);
              pack();
              setVisible(true);
              setDefaultCloseOperation(EXIT_ON_CLOSE);
      public void openDataBase() {
              uri = "jdbc:odbc:MABA";
              try {
                      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
              }catch (ClassNotFoundException cnfex) {
                      System.out.println(cnfex.getMessage());
              try {
                      conn = DriverManager.getConnection(uri);
                      stmtAppendTable = conn.createStatement(
                      ResultSet.TYPE_SCROLL_SENSITIVE,
                      ResultSet.CONCUR_UPDATABLE);
                      rs = stmtAppendTable.executeQuery("SELECT * FROM Personal");
              }catch(SQLException sqlex) {
                      System.out.println(sqlex.getMessage());
      public void appendRecord() {
              data = new dtPersonal();
              data.setID(Integer.parseInt(inputPanel.tfPersonalID.getText()));
              data.setName(inputPanel.tfName.getText());
              if(inputPanel.rbMale.isSelected()) {data.setSex("M");}
              else
              if(inputPanel.rbFemale.isSelected())
                      {data.setSex("F");}
              data.setAddress1(inputPanel.tfAddress1.getText());
              data.setAddress2(inputPanel.tfAddress2.getText());
              data.setAddress3(inputPanel.tfAddress3.getText());
              data.setCity(inputPanel.tfTownCity.getText());
              data.setState(inputPanel.cboState.getSelectedItem().toString());
              data.setContactPhone(inputPanel.tfContactPhone.getText());
              data.setHeight(Double.parseDouble(inputPanel.tfHeight.getText()));
              data.setWeight(Double.parseDouble(inputPanel.tfWeight.getText()));
              data.setStatus(inputPanel.tfStatus.getText());
              data.setDateOfBirth(inputPanel.tfDateOfBirth.getText());
              data.setDateJoined(inputPanel.tfDateJoin.getText());
              dobDate = Date.valueOf(data.getDateOfBirth());
              djDate = Date.valueOf(data.getDateJoined());
              try {
                      rs.moveToInsertRow();
                      rs.updateInt("Personal_ID", data.getID());
                      rs.updateString("Name", data.getName());
                      rs.updateString("Sex", data.getSex());
                      rs.updateString("Address1", data.getAddress1());
                      rs.updateString("Address2", data.getAddress2());
                      rs.updateString("Address3", data.getAddress3());
                      rs.updateString("State", data.getState());
                      rs.updateString("Town", data.getCity());
                      rs.updateString("Contact", data.getContactPhone());
                      rs.updateDouble("Height", data.getHeight());
                      rs.updateDouble("Weight", data.getWeight());
                      rs.updateDate("Date_of_Birth", dobDate);
                      rs.updateDate("Date_Joined", djDate);
                      rs.updateString("Status", data.getStatus());
                      rs.insertRow();
                      System.out.println("Data Insert Successful");
              }catch(SQLException sqlex) {
                      System.out.println(sqlex.getMessage());
      public void closeDataBase() {
              try {
                      rs.close();
                      stmtAppendTable.close();
                      conn.close();
              }catch(SQLException sqlex) {
                      System.out.println(sqlex.getMessage());
      public static void main(String args[]){
              new Personal();
}

It crashes when I insert a record to Access's database. I remove the date data type then it runs fine. How to solve this date problem?

IPhone wifi issues need HELP ASAP

Hi, my iPhone's wifi is super slow. I tried out the speed test app on both my iMac and iPhone and I got 10.18 Mbps download and 3.08 Mbps upload; on my iPhone I got 0.98 Mbps download and 0.15 Mbps upload. I tested them from the same spot and got these results using speediest.net . Why is it dramatically slower on my phone? Is there a way to make the wifi faster on my phone?? Thanks for those of you reading this and helping me out!!

No i only have 1 but the speed on my mac is dramatically faster then my phone and i tested both on the same network and the same spot and iphone was super slow. Yes i already reset my network settings and still got under 1Mbps. Any other suggestions i should try?

Installation issue, need help ASAP

When trying to install, it keeps saying "Installation failed- Learn More" and the log says "ERROR: Media DB Error : 12" Does anyone know what this is and how to fix it? I can't seem to get any help troubleshooting so far. And please respond as soon as possible.

Nobody can tell you anything without proper system info or other technical details.
Mylenium

MOVED: [powering on issues]Need Help Asap

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=137947.0

Quote from: ihatetn931 on 01-May-10, 04:15:00
I have tried 2 diffrent Power supplys and it still did the same thing, I also tried that PSU in another computer and it worked fine so i don't belive it's the PSU
Weird then...
Quote
It turns on for about 3-5 seconds then shuts it self off. The time it is on it dosen't show a post screen.
Have you done >>Clear CMOS Guide<< with power cord removed?
Have you re seated the CPU and CPU Heatsink [apply new thermal paste, remove any dust if there is any, and ensure that they are properly installed]

Safari issue,need help asap please.

Somehow I have a "Web Slice Galery" toolbar on safari now......It's supposed to be for IE,so how the **** is it even on here??...Is there anyway to remove it without restoring??
This is what it looks like.
http://i131.photobucket.com/albums/p293/twistedadrian/885c5ec8.jpg
When I click that,it's sends me here
http://www.ieaddons.com/en/ie8slice/Default.aspx
Message was edited by: twiztidfreak

twiztidfreak wrote:
How exactly do I do so?There is no option anywhere to delete/remove it.
Go to Settings > Safari > Always show bookmarks bar. This can be turned On/Off.
Another approach is to touch the bookmarks icon, select "Bookmarks Bar" then Edit and remove the bookmark you have added. With no content the bookmark bar will not be displayed.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Need Help ASAP!!! So FRUSTRATING!!! text message problems!!!

I have 2 problems right now with my BB Torch 9810. I need help ASAP.
1. It only saves 20 text messages. Messages that I received from august 2012. But it seems other messages are not stored. I don't delete messages, so I don't know where my other messages go. And sometimes if you create a new text, text history will show. But not anymore. This have been going on for a long time.
2. When I receive text message from some of my contacts, it will show the first few words of the text. But when you click on it, the message is empty. funny thing is, not all of my contacts are like this.

Hey iragarcia,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest performing the following to resolve the issue:
1. Create a backup of all your data by using BlackBerry Desktop Software. In BlackBerry Desktop Software go to Device>Backup and save the file onto your PC or Mac.
2. On the BlackBerry Torch 9810 smartphone go to Options>Security>Security Wipe and put a checkmark beside 3rd party applications as well. Type in the word BlackBerry and press wipe data.
Please Note: You can re-install your applications through BlackBerry World.
3. Once completed test sending and receiving some SMS messages prior to restoring any data. If the issue is resolved, then go into BlackBerry Desktop Software and go to Device>Restore and choose custom and only choose contacts.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

My Curve 9300 lost service need help ASAP

I lost all serivce on my blackberry curve 9300 and the only way I get service is if I go outside my house. Sometimes I get service in my house but it's for 5 seconds and then I get "searching for network" then it goes to "SOS" I need help ASAP.

yankeegirl32491 wrote:
My carrier won't do anything about it because I'm not an authorized user of the account which is stupid. I wasn't having a problem with service for about a year and yesterday my service just cuts out for no apparent reason.
Hello...well, that's a bit disconcerting...aiding and abetting what could be an unethical use of service...but I'm hopeful that there are further details that mitigate that suspicion. In any event, review this KB for perhaps helpful information:
KB03448 Network status indicator shows "SOS" on the BlackBerry smartphone
It is possible that they have a tower out, and you now are receiving service from a more distant tower, which does not have adequate signal strength to work through the walls of your house. But, sadly, there is no way for you to actually find out if such is the case or not.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm restoring my iPhone right now, need help ASAP

So I've had a corrupt file that's been taking up 7GB in my 'other' stuff on my iPhone 5 so I'm finally restoring it right now, but I'm guessing the backup data with have saved whatever that corrupt file is in it.
So 3 questions: • If I don't want to backup now but for some reason decide I want to in a say a day or so what would I do?
• Can I restore my phone from my iCloud backup, if so how?
• After restoring my iPhone will it create new backup data that will wipe over the already existing data with the corrupt file in it or what?
Thanks for any help/advice, I'm in the middle of doing this so need help asap if anyone can help.

1. make a backup any time you want.
2. Yes, if you have a iCloud backup
Settings > General > Reset > Erase All Content and Settings
3.Yes on computer it will replace the old backup. (I suggest you manually delete the backup first)
iTunes > Preferences... > Devices > select backup and click the Delete button.

Audio acting up in Premiere Pro | Need Help ASAP

Okay, I need help ASAP because this has been a serious issue for me.
So my source video (an interview) is on PR's timeline. I start playing it and it's working fine, but all of a sudden, the audio skips back to the beginning of the interview, then about 10 seconds later, it gets back on track. I checked the original video that I imported it from and it's all fine. I even reimported the file, but the problem persists.

Okay, problem solved. I took the working source video, took the audio out and put it in there.

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

Infoset data issues need help ASAP

Similar Messages

Maybe you are looking for