Infoset ERC_EEO_2003 - Questionnaire data filled prior to applying 1486514
Hello,
I wrote a query using infoset ERC_EEO_2003. This infoset retrieves data from table T77RCF_INFDAT. Initially, there were no data in this table. Then, I applied a note 1486514 and questionnaire data started filling in this table. Now, I could able to get data from query which are filled after applying this note. But, I'm not getting questionnaire data filled prior to applying this note. Please can anyone help me to get this old data in the same query ?
Thanks in advance
Regards,
Prabhakara
Similar Messages
-
Want to schedule WebI report for End date of Prior Month
Hello Experts,
We have WebI report created on top of Bex Query, We have key date as prompt for the report. Can we schedule the webi report for key date as last date of prior month, so if current month is February, my key date should be Jan 30 2011. I am not sure if this is possible?
Thanks,
RaviYou need to apply two FM to get the end day of the month.
First you need to apply FM MONTHS_PLUS_DETERMINE. This will give you the date after 3 months.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
MONTHS = 3 " << for 3 months
OLDDATE = l_start_Date " << 12/01/2007
IMPORTING
NEWDATE = l_3_Date. " << 02/01/2008
Then call the FM RP_LAST_DAY_OF_MONTHS . this will give you the end date of the month
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
day_in = l_3_Date " << 02/01/2008
IMPORTING
last_day_of_month = l_3_Date " < 02/29/2008
EXCEPTIONS
day_in_no_date = 1
OTHERS = 2.
Call both FMs again to get your another date(after 4 months).
Regards,
Naimesh Patel -
When I enable imatch on my iPhone 4s it takes approximately 30 minutes before other data fills 13.2gb of usable data on the phone. This problem does not occur when I manually sync music to my phone only when I access imatch. Is this a common bug, and if so; is there a fix?
yes it is. you can sign out of itunes account then sign back in. use http://support.apple.com/kb/ht1311 to sign out.
-
Restrict creation of Service Entry Sheet if the Date is Prior to PO Date
Hi,
I need to restrict from posting a Service Entry Sheet whose Document date and Posting Date are Prior to the Document date of a Puchase Order...Can any one please suggest...
Regards,
SabitaHi,
Better to go release streatgy in SES Release. Give the right of revoke to some other as per business.
also
make the error in
Application Area SE , system msg 155 Not possible to cancel release with code & as error
Restrict the user with release Code and release Grp in M_SRV
Regards,
Pardeep Malik -
I want to prevent users from saving a PDF form with the data filled in
I am using Adobe Acrobat X Pro to create a fillable PDF form. When I open my form in Acrobat Reader XI, it says right at the top "You can save data typed into this form." I have NOT saved it as Reader Extended PDF. This is a form that will be emailed to recipients or available to download from our website as a PDF so they can fill it out on their office computer, print with the data filled, and then fax or snail mail to us. (No online or email submissions.) We do not want them to accidentally save confidential information on the form that will be visible to the next user when they close it, or to Save As and keep the filled form.
I know there are still ways to do it if someone really wants to, like printing it to PDF or using a PDF software other than Reader, but these are not folks who would have time or intention to do such a thing. 99% of them will be using some version of Reader, probably a much older one than mine. Thank you for any advice!Thank you Gilad and George for trying. I just discovered both of you have replied to this issue here - http://forums.adobe.com/message/5881211#5881211 - which is my exact same situation; I am also a regional health care agency trying to provide forms for health care providers! (It's a small world.) I just didn't find this thread the first time I searched for answers. I will investigate the JavaScript reset Form statement. Thanks!
-
Command similar to data fill in Excel?
Is there a command that is similar to the data fill command in Excel? I am looking to have a way to increment a column by week and another to decrement each cell by one. And while I am on this subject, has anyone seen a cheat sheet for the most common Excel commands to iWork '08 for say Pages and Numbers?
Ancient_One wrote:
Is there a command that is similar to the data fill command in Excel? I am looking to have a way to increment a column by week and another to decrement each cell by one.
look at pages 66 and 91 in the PDF User Guide.
And while I am on this subject, has anyone seen a cheat sheet for the most common Excel commands to iWork '08 for say Pages and Numbers?
Apple deliver three well done PDF User Guide describing the way to use the progs and giving a list of every available FUNCTION().
Yvan KOENIG (from FRANCE jeudi 29 mai 2008 18:29:17) -
Reader X - Getting Security Alert with a data filled PDF form
My site uses PDF forms that have their data filled in dynamically by the classic asp code on the site. Before Reader X version, they were filled and displayed without a problem. With Reader X they display the security warning: "Data from this site is blocked to avoid potential security risks....." and the Options button to trust the site. I get this even thoguh it's the same site they are on already and I'm using an SSL cert for all files and I'm also using a direct link to generate the PDF.
I know the user can just click the options and make the problem go away but many users seem unable to read and or panic when they see the alert.
Is there a security setting or trust setting I can add or set in my form so that I will not get this security alert??No, apart from creating a certified document, but the user would still have to add you as a trusted source. If a document could override this, it would be rather pointless to have it in the first place.
-
Form with multiple signatures, each with sigDate, only one date fills
I have a form with two signature fields, Sig1 and Sig2. Each sig field has an associated date field Sig1Date and Sig2Date.
I have a Topaz signature pad, so the form users physically sign the document.
When the first signature is entered (in either Sig1 or Sig2), the associated date field autofills as expected.
When the second signature is entered the associiated date remains blank.
I have other forms from vendors with up to six signature fields, each with dates, where each date fills as the signatures are entered... what am I doing wrong?
Thank you.The problem must be in the way the form is constructed. There must be a JavaScript associated with your signature fields that autofill the date, and perhaps it is working on Sig1 but not on Sig2. If you sign the second signature field first, does its date field get populated? Do you know that other people are able to sign both fields in the same PDF and have both dates populated? I am sceptic about that. IMO this is more a question to the author of the PDF that you are signing.
-
It appears that date values prior to 1970 are not supported in prompt LOVs.
To test this, I created a universe (unv) with a object having a date value of 5/1/1970 through 5/1/2020. I then created a report with a prompt on this object. When I attempt to refresh the report in REST, I get the following response:
<lov searchable="true" refreshable="true" partial="false" hierarchical="false">
<id>UNIVERSELOV_DS0.DO4</id>
<updated>2014-12-29T09:47:38.000-05:00</updated>
<intervals>
<interval id="0">
<value/>
<value/>
</interval>
<interval id="1">
<value/>
<value>2001-04-30T20:00:00.000-04:00</value>
</interval>
<interval id="2">
<value>2002-04-30T20:00:00.000-04:00</value>
<value>2020-04-30T20:00:00.000-04:00</value>
</interval>
</intervals>
<values>
<value/>
<value/>
<value/>
<value/>
All of the "<value/>" rows represent a date prior to 1970. Note that this is occurring in interval ranges as well as values. When I request all the values in a single interval, the problem becomes more apparent:
<parameters>
<parameter dpId="DP0" type="prompt" optional="false">
<id>0</id>
<technicalName>Enter value(s) for THEDATE</technicalName>
<name>Enter value(s) for THEDATE</name>
<answer type="DateTime" constrained="false">
<info cardinality="Multiple">
<lov searchable="true" refreshable="true" partial="false" hierarchical="false">
<id>UNIVERSELOV_DS0.DO4</id>
<updated>2014-12-29T09:48:20.000-05:00</updated>
<values>
<value/>
<value/>
<value/>
(multiple identical rows removed)
<value/>
<value/>
<value/>
<value/>
<value/>
<value>1970-04-30T20:00:00.000-04:00</value>
<value>1971-04-30T20:00:00.000-04:00</value>
<value>1972-04-30T20:00:00.000-04:00</value>
<value>1973-04-30T20:00:00.000-04:00</value>
<value>1974-04-30T20:00:00.000-04:00</value>
<value>1975-04-30T20:00:00.000-04:00</value>
(years 1976-2015 removed)
<value>2016-04-30T20:00:00.000-04:00</value>
<value>2017-04-30T20:00:00.000-04:00</value>
<value>2018-04-30T20:00:00.000-04:00</value>
<value>2019-04-30T20:00:00.000-04:00</value>
<value>2020-04-30T20:00:00.000-04:00</value>
</values>
<columns mappingId="0">
<column type="DateTime" id="0">THEDATE </column>
</columns>
</lov>
</info>
</answer>
</parameter>
</parameters>
Is this a bug, or intentional behavior?hi Joe and Anthony,
... and happy new year!
Looking at the code, there is a bug on our (aka Raylight) side, for sure, oops!
(Just to know: does it work well with BI LaunchPad?)
Thanks,
eric -
Data are not being applied at destination side
Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.Problem solved.
-
ITunes movie collection and data fill for the "Get Info" section...
I am an avid iTunes (iTunes 8.2.1(6) for Mac) user. My iTunes Library is stored on an OWC Guardian Maximus Raid (1tb-1tb) connected via USB2.0 to my Intel iMac (2.26 C2D/ 2GB RAM/ 350GB HD/ 256K ATI Radion X1600). I have 3 Apple TV's that we use constantly to watch our movie collection in different locations throughout the house (Kids Playroom, Living Room, & Master Bedroom) using our 3rd Generation AirPort Extreme (Dual-Band).
Does anyone know of a service or program that can data fill all of the information in the "Get Info" sections especially for the movies? I have the titles and dvd cover photo on all of them just not any of the other information. The only ones that have any other information are the ones I purchased from the iTunes store. Any ideas or help is greatly appreciated.Try MetaX
Regards -
Where are the responses to questionnaire data saved (EEO)
Hi,
where is questionnaire data saved in e-recruitment. I am interested in getting to the responses to the EEO questionnaire. I thought they were stored in HRT5022 but it doesnt look like. Any pointers will be greatly appreciated.
many thanks in advance
AndySuresh,
I have managed to look at these programs and they are displaying what I need. However my requirement is to report an arange of responses. Which methids do i use to report on questionnaires responses. Are there any standard methods or functions? I have been looking in classes CL_HRRCF* and it looks like is the right place but not sure which ones I should be using.
Thanks in advance for your help. -
I have a new Macbook Pro. All data from prior Mac was migrated to the new Mac. I want to continue Time Machine on the new Mac and retain the history. An option is to "inherit" the old Time Machine. I want to make sure this does not errase the current data, but creates a current backup.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
-
Does transferring data from prior phone 3G to new phone i5 cause poor battery life?
Does transferring data from prior phone 3G to new phone i5 as a part of phone activation cause poor battery life?
No
-
For the second month in a row, Verizon has added a $15.00 "data over usage" fee. When I call customer service, I am told that the charge is for over usage of data from prior months in which they can't tell me what months we went over. We've been Verizon customers for 10+ years & all of a sudden their customer service has severely declined. I am always on Verizon's website looking at our usage and the past 6 month analysis to make sure we're staying within our range of usage and we've never gone over our allowed plan for data. I plan to file a formal complaint/dispute with all of the consumer protection agencies and/or authorities but need to know which ones are for telecommunications issues for Georgia consumers.
For a customer of 10 years to never read the customer agreement...:
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
SEE FULL AGGREEMENT HERE: Customer Agreement | Verizon Wireless
Maybe you are looking for
-
I have 2 user id's with apple, i bought 26 songs from my laptop recently using my work e-mail. I plug my i-pod to sync it and it says that my i-pod is tuned with another library. i don't want to erase the songs I have already because they are about 7
-
Can I transfer music from my galaxy s5 to my ipod nano
Can I transfer music from my galaxy S5 to my ipod nana?
-
Standard XSLT 2.0 date functions not working in PI 7.11
What do I need to include to use the standard XSLT 2.0 functions - such as format-date, Current-date() ? The code below works correctly in XMLSpy... but when I import the XSL as an Imported Archive in PI - it fails with... Method fatalError called,
-
Broadband Speed dropped from 2.7Mbps to 448KBps To...
Last night my Connection was at 2.7Mbps, got home from work today at 17:00 and i had no connection, after numerous resets and even a factory reset of my 2wire hub, i got Broadband back, but at 448KBps!! Any Help? Just done the BT Speedtest and it say
-
I can't play any videos such as Youtube