Infoset error in BI7
Hi all,
Iam trying 2 load 2 incoubes in bi7 .but evary thing showing sucessfull .but when iam going to see display data . showing the error
Error reading the data of InfoProvider ISET_KK
Error when generating the SQL statement
POS(373) Invalid keyword or missing delimiter
Thanks in advance
And what is the infoset error????
Are you having an infoset on these two cubes, where you are getting this error? If yes, please go to infoset and check your Join Condition. The Components of infoset should be joined on some key values, then only display the data.
Thanks..
Shambhu
Similar Messages
-
BI 7.0 InfoSet Error/Mutiprovider
Hi, We have upgraded to SAP Netweaver 2004s, BI 7.0 SP 05.
we are getting errors when I try to execute Infoset and also with the MultiProviders
"Error Error Reading the data of InfoProvider"
"Error Error when generating the SQL Statement"
"Error An exception with type CX_SY_REF_IS_INITAL occured, but was neithe"
Can someone tell me how to fix this error.
thanks,
Deepak KunavarapuHello Deepak!
The error messages are quite general. Could you please create an OSS message on component BW-BEX-OT? Our OLAP colleagues should have a look on this...
Thank you,
Tobias -
Process chain Transport error in BI7
Hello All,
We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process in chain :
Results of check for process in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
ChandranHi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des. -
Hi
Recently we had migrated to the new authorization concept in BI7 after that, when the business users open an query or workbook they get the selection screen and when they press F4 on company code info object (Authorization relevant object) to select values they get an message" you dont have sufficient authorization" and the out put does not get displayed. but as an BW developer i am able to open the same report without any error
I checked in for authorizations in Su01 and su53 every thing looks fine for the business user.
Note: This error occurs only to queries having infoobject company code
Can someone help me out in this issue?
Thanks a lot
SheetalHi sheetal,
I am facing the same problem what you have faced regarding authorization error in BI queries.
when users try to open the workbook, select their options in selection screen and run it, they get warning 'you do not have sufficient authorizations'. when i try to run the same, i am able to open it. this is happening in prod.
how are you able to solve this problem. -
hi friends,
We have upgrade system to BI7
Now we are facing problem when we copy the Formula key figure and paste in the Column row of the Query designer.
but when we create new formula key figure there is no such error for the same.
Cut/paste is to fasten the query desing ................!
can any one have the Solution to this Query
points will be rewarded...........................................!
Advance regards,
hari prasad G
9833088729.Hari,
what is the error you get and what is the SP Level for your BI7.0 instance ?
Arun -
Formula Variable Error in BI7.0 Query Designer
Dear All,
I am getting the following error when using a formula variable with replacement path. Please help me on this.
we are using BI7.0 SP level 13
ABEND: Variable D30TEST0UIF40OXY0A5JZFO40 (D30TEST0UIF40OXY0A5JZFO40) does not exist or is incorrectly used 5OTGNQ295YVYORGW5NOBJ9NUP
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: Query ZFIGL_O02_Q002_7 could not be opened.
Error when generating dataProvider
Best Regards,
SGKHi Vikram
It didn't seem relevant to my case but I downloaded it and it solved my issue.
Thank you very much
Shlomi -
0HR_PA_EC_11 ECM InfoSource activation error in BI7
Hi Gurus,
I'm having error during 0HR_PA_EC_11 infosource activation. The error is "Field SALLVMAX of type CURR requires a reference field of type CUKY" while activating after I installed it from standard BI content.
And some error details:
/BIC/CS0HR_PA_EC_11-SALLVMAX (combination reference table/field /BIC/CS0HR_PA_EC_11-/BIC/ANCUR does not exist)
This is for ECM HR mod btw.
Is there any step did i miss out.
Appreciate any assistant.
Thanks in advance.
Edited by: Mohd Irwan Mhd Non on Oct 15, 2008 10:24 AMHi
the reference one CUKY is available in AWB?
If you are using BI7 then why do you need infosource,you replicate data source then install transformations and datatarget etc.
In BI7,you dont need infosource concept.
Regards,
Chandu. -
hi dear experts if we get time stap error in bw 3.5 i know how t o resolve for this we got se38 and we give a program RS_TRANSTRUE_ACTIVATE _ALL .But in bi 7 how to handle is there any program plz clarify this problem.
Thanks in advance
ramesh.Hi
we can replicate the datasource from source system and then try by actuvating the data source by using the program RSDS_DATASOURCE_ACTIVATE_ALL.
Then we can try by reloading the data. i fell this will solves the issue in BI7
M -
Process chain activation error in BI7...
hi gurus,
we are creating process chain for master data for
0PROMOTION_ATTR
0PROMOTION_TEXT
0SALESORG_ATTR
0SALESORG_TEXT
0CUSTOMER_ATTR
0CUSTOMER_TEXT
0VTYPE_TEXT
0DIVISION_TEXT
0SALES_GRP_TEXT
0DISTR_CHAN_TEXT
0CUST_GROUP_TEXT
0SALES_OFF_TEXT
0MATL_GROUP_TEXT.
we have created 1 start process and then execute info packages and DTP'S and used 'OR' conditions to connect to Attribute change run.
while i try to save my process chain its giving warning that 'Add at least one process to the chain before saving' and when i try to activate the chain its giving below error
Chain has no starter. Add a starter.
Message no. RSPC020
Diagnosis
The process chain has no start-process. A process chain always requires exactly one general starter.
System Response
The system is unable to activate the process chain.
Procedure
Add a general starter to the chain, and schedule it as the first process in the chain.
please suggest me how to rectify the problem.
regardsHi Harish,
Will you please goto process chain start varint and give the new varint for that and try to execute it once again..it will work for you...
If you could check once the check button all will be green and you can able to activate the process chain...I hope you are maintained the infoobjects in attr bute change run...problem might be with the start varint ionly...change the start varint and if you could not able to activate please let me know....
Regards
Srini -
Process chain error in BI7.0
Hai
Im trying to load the data from the flat file to DataStoreobject in BI 7.0 by using the process chain .
I build the process chain like below
start process -> infopackag -> DataTransferProcess -> ODS activation data.
Then i chek the process chain . then it is ok .
Then i activate the process chain and then i schedule the process chain .
Then it gives 'job higher priority A' , 'Job higher priority B' , 'Standard Priority C' . Then i select the 'Standard priority C'.
Then im getting the following error saying that
<b>Job BI_PROCESS_DTP_LOAD could not be scheduled. Termination with returncode 8</b>
Then i looked into ST22 . i got the following error <b>MESSAGE_TYPE_X</b>
Please give me the solution.
kumarHi
For this error return code 8 go to T-code SU 01 in that select copy icon then give copy from sapuser to ALEREMOTE
. eventhough it will occurs go to SU01 copy from ALEREMOTE then in that give profiles ok if its ok give to me points
Thanks
Hanu
Edited by: chitluru hanumanthu on Jun 19, 2008 5:12 PM -
Error while creating - Infoset in SQ02
This is the error, i am getting when i am trying to create - Infoset in SQ02. Can any one help to resolve, check and generate
the infoset
Error in parameter PYSORT
Statement concluding with "...TYPE" ended unexpectedly.You could try applying OSS note 1117474. You may want to review this note to see whether it fts your case..
Hope this helps. -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Hi,
I am working on BI7. I have problem that I cannot open BI7 BEx Analyser, however I can open 3.X Analyser. On clickin for BI7 Analyser It say that 'Critical programm erroe occured, The programm needs to close, Please refer to the trace for further information'.
My question is, if I can open 3.X anayser, why I am getting error for BI7 Analyser.
Can some one please guide me resolve this issue.
For more details MS Office 2003 Patch 2
SAP GUI patch level 7.Hi,
Looks like a GUI problem, you'll need to install BI again.
Uninstall BI. and then do the following
Install the following softwareu2019s / patches before installing SAP FrontEnd.
u2022 .Net framework 2
[http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en]
u2022 Microsoft Visual J# .NET Version 2 Redistributable Package
[http://www.microsoft.com/downloads/details.aspx?familyid=F72C74B3-ED0E-4AF8-AE63-2F0E42501BE1&displaylang=en]
u2022 Install the the office Patch KB907417 if not present.
[http://www.microsoft.com/downloads/details.aspx?FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670&displaylang=en]
Then install BI7 frontend and BEX.
Install the BI patch .
Regards. -
Error while generating the Infoset
Dear SD Experts,
I get the Error While Generating the Infoset.
I am actually trying to write a Query.
the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
below is the List.
1)Differences in field TEXT_VBAP_CHARG
2)Differences in field TEXT_VBEP_ETENR
3)Differences in field TEXT_VBEP_ETENE
4)Differences in field TEXT_VBEP_PLNUM
5)Differences in field TEXT_LIPS_CHARG
6)Differences in field TEXT_LIPS_LGPLA
Thanks in Advance.
Regards,
Santa Khattri.Hi ,
From what you are saying, i am guessing there could be difference in field types used and in dictionary.
Try this.
1.Go to SQ02
2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
3. Select your Infoset.
4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
or Try this.
1. Select your infoset.
2. Change
3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
Thank you.
Regards,
Subin John. -
Errors while copying queries from Infoset to DSO in BI 7.0. Why
Hi All,
I am trying to copy queries from Infoset to DSO in BI 7.0.
Message displayed after entering the data target names in Source Infocube (Infoset) & Target Infocube (DSO).
: Errors when reading InfoObjects for InfoCube (Infoset).
My Infoset has 2 queries.
I need to copy only one query to the DSO which is part of the infoset. How can we achieve this.
Please explain.
ThanksHi Murali,
who said the target is different.
The target is different in the sense, source is an Infoset & Target is an DSO.
This DSO is a part of the above Infoset.
RSZC works here but its giving errors as mentioned above.
Regenerate in the sense, u mean i need to create the same again on DSO.
Is there any other way.
If providing some solution, let it be clear.
Thanks.
Maybe you are looking for
-
Is there a way to move songs from my iPod to the Library?
I used my friends computer to download some music (I have dial-up) and now I want to copy some of the songs to the library. Is there a way I can do this?
-
I want to install Excel ,Word and powerpoing where i can get these softwares to install?
Hi Friends , I want to install Excel ,Word and powerpoing where i can get these softwares to install?
-
Send IDOC from Business Connector to SAP faster
Hi Developer! I need to send a very lot of IDOC converted from XML files from the Business Connector to SAP. The XML files are in different directories pro business partner, but they have a same type (ISU_MSCONS). My problem, that the import take a l
-
Sending customizd strucuture data to Xi.
Hi Guys, If i dont want to use IDOCS and PROXY and applicatoin server, what is the other way i can send data to Xi from R3 ? Also let me know what type of connection setup is required if there is any other means. Thank You!.
-
Hi, I have tried everything to start the Oracle Database 8i as per note 400421, but i am not able to solve this problem. Can you help me to solve this error. trc file: "dev_w0", trc level: 1, release: "620" * ACTIVE TRACE LEVEL 1 * ACTIVE