InfoSet in BW 3.x - shows variable calendar day (SAP Exit)

Hi,
I have created a infoset using a Left Outer Join and when I run the report it shows a variable called Calendar Day (SAP Exit). The infoset is not using any temporal joins or time dependency.
i am not too sure why the vairable is automatically showing in the report. Note this is a 3.x infoset.
Thanks,
Leo

Yes, i havent added it to the report. I actually created a brand new report with two fields in it (no variables) and the calendar day vairable is still shown.

Similar Messages

"Current Calendar Month" vs. "Current Calendar Day (SAP Exit)-1" why this?

Hi,
we are looking at a situation regarding Yerterday's data against MTD for the same restricted key figure. The believe is that MTD(Jan 10) less MTD(Jan 9) should be equal to Yesterday(Jan 9) i.e. yesterday's data, assuming today is Djan 10 2007.
Unfortunately it is not happeing like that. Any ideas as to what may be going on?
"Yesterday" is the key figure is restricted by
"Calendar day" restricted on "Current Calendar Day (SAP Exit)-1"
"MTD" is restricted on
"Cal. Year/Month 0CALMONTH" restricted on "Current Calendar Month 0CMONTH"
Shouldn't the Yesterday and the difference between MTD as described above be the same?
If not, how should the time char be handled to get what I am looking for?
Thanks

HI,
thanks for the example ... let me correct what you did not get:
Using your exmple,
MTD(Jan 10) = 1500
MTD(Jan 9) = 1400
Therefore, MTD(Jan 10) - MTD(Jan 9) = 1500 -1400 =100
But on Jan 10, when I say Yesterday, I am referring to Jan 9 = 600
Why is Yesterday, calculated based on the cummulative difference of the two MTDs not equal to the raw Yesterday?
This is where the confusion is. Somebody got the report for MTD(Jan 9) and noted the number down. Then on the next day got the report for MTD(Jan 10) and noted the numberber down. When she takes the diffference and get 600, she expects that when she compares it to the Yesterday's data she gets the same numbers. Why is it that also in your example it does not happen that way.
Thanks

HT202314 how do I turn of blue hour and golden hour from showing in calendar days

how do I turn off blue hour and golden hour from calendar days on macbook pro

how do I turn off blue hour and golden hour from calendar days on macbook pro

3 variables connected by SAP exits

Dear All,
I am using the Bex Query Designer to make a finance report.I am using three input variables , netduedate(op_keydt) ,clearing date(op_keyd3) and posting date(op_keyd2).But at the selection only netduedate is asked as input to user . netduedate(op_keydt) seems to be connected to clearing date(op_keyd3) and posting date(op_keyd2) by SAP exits. I am getting a satisfactory o/p in that I get this year's outstanding and overdue collection amounts.But now I am required to add another 2 columns showing LAST MONTH's outstanding and overdue.How do I get another 3 i/p variables of netduedate,clearing date and posting date which are connected by SAP exits or user exits in the same way so now the user gets current outstanding and overdue and last month's outstanding and overdue?
Regards,
Ratish

Hi,
are your variables restricting the key figures or filtering IObjs in the query?
You'll have to work with restricted key figures.
Your actual outstanding and overdue will be restricted by your vars.
Add two more KeyFigs for last month overdue and outstanding and apply the same logic.
First try with offsetting the vars with -30 to see if it works.
You might also need to debug and see how SAP is filling these vars.
You can find the function modules in SE37: RSVAREXIT_<varnam>, in your case type RSVAREXIT_0P_KEYD* and press F4, you'll see all of them.
hope that helps...
Olivier.

Using SAP Exit Variable twice on the same report

Hello all,
I need to use the same variable -Current Calendar Day (SAP Exit)- to filter against 2 characteristics on the same report.
Unfortunately it's not possible, here the error:
" Variable 0DAT is used in both (structure) element 11T4741S4XTWZUAJ9IQ6DUDE1, and element AZLK9YCS4XGJ940MRPMLXMDS9 for various characteristics (ZCBBIDATE, ZCBPHTDT). This is not permitted as the characteristic is required for the F4 value help structure."
May you please suggest me a way to do it ? Thanks in advance.

Hi
As the 0DAT varaible check the other standard varaible which provides the same function in business content.
Or create a varaible with Customer exit and use it.
In CMOD write the code in like this
WHEN 'ZDAT'
L_ZDAT = Sy-datum.
L_S_RANGE-low = L_ZDAT.
and follow the other codes as you define for other varaibles.
REgards
M.A

In a query, how to display the calendar day and the weekday in the heading

Hi Experts,
I am in a situation where I need to have calendar day and the weekday in a heading of a column in a query? we are in BW 3.5.
Here is an example:
                     04.22.2007
                     Sun
Branch 001      1,000.00
Branch 002      2,000.00
Branch 003      3,000.00
in my query, this is a restricted key figure with sales qty and calendar day and I have a text variable to show the calendar day. In addition to that, the customer wants weekday as well.
Not sure how to do this.
Any help is much appreciated.
Thanks.
Jenny.

Hello ,
      This InfoObject do not maintain the weekday ...so it is difficult to show the Weekday for a date as per the standard way.
          You need to write a Customer exit variable..and you need to use a Function Module : DATE_TO_DAY. This will convert your date to day ie 23.04.2007 = Monday.
      Note: This function module is not available in BW so try to copy this FM from R/3 system.
      I am sure this will solve ur issue:-)
                --EnjoySAP
Have a great day!

Calendar day number?

Hello gurus, I am trying to to create a report in which I display the number of people that checked in and out of a hotel. I need this report to be shown daily. The problem is that I need a comparison between each day and last year's same day. I currently have (ignore the '/'):
/////////////////////////////////////////KF 2007/////////////////KF 2008
0CALMONTH2/0CALDAY
Jan
////////01.01.2007
////////01.02.2007
////////01.03.2007
////////01.04.2007
and so on, until yesterday.
Right now the report is not working correclty. On KF 2007 I have created a selection which includes the amount of check ins, displayed by "current calendar year" (SAP exit variable) with a -1 offset. The same goes for KF 2008 but without the offset. The problem is that 0CALDAY takes values from 2007 and 2008, so the report gets partially populated on 2007 days (because KF 2008 is all blank) and partially populated on 2008 days (because KF 2007 is all blank).
I thought about having a Calendar Day characteristic in which month and year fields were removed (so it would only show 01-31 for each month) and was looking on the business content to see if there is already a characteristic that would meet this requirement. However, I could not find one. Does such a characteristic exist, or how can I create one? Or if this is too complicated, how can I get around this problem?

My requirement has changed slightly. Now what is needed is a characteristic which gives me exactly the day of the month, and a characteristic that gives me the month in text. 0CALMONTH2 gives me the month in numbers (1-12) but I need their names (January-December), and what I have seen is that this characteristic does not allow me to display them as text. And for the day characteristic, I cannot find one which gives me the day of the month (1-28, 1-29, 1-30 or 1-31 dependeing on the month).
Any ideas?

Interval variable for Calendar Day

Hi Experts,
Please help!
We are working with CE VC 7.2, our model has an input form to a variable on calendar day (data source: BI Query). We would like to input a date range using a from and to date picker.
How do we populate the values from the date from and date to - there used to be a value help option on BI variables in 7.0 - however, we don't see this option anymore on 7.2. Is there another way to do this.
Please advise.
Thanks, Anna

HI,
I am working on CE 7.1 version and in this if you take the "Date From" and "Date To" variables are as of type "DATE" while defining the data, it will show up as date fileds attached to input box.
you can directly enter date and/or you can select the date by clicking on date picker.
I am sorry if it is not like this in 7.2, I can not test also
PradeeP

ICal 'Show Holidays calendar' not showing holidays in Australia after upgrading to Yosemite.

Hello, I had been in Italy before moving to Australia and I had set Show Holidays calendar in iCal to display Italian holidays. When I've moved to Australia, I've changed the regional settings to Australia and therefore iCal was showing Australian holidays. After I've upgraded to Yosemite, I can't see any holidays anymore. I tried to uptick 'Show Holidays calendar' and reboot Yosemite, then tick it back and it is still not working for Australia. if I change my regional settings for instance for Italy, it works. It just refuses to display Australian Holidays so for now I'm forced to use Google calendar subscription for public holidays.
How can I restore the iCal 'Show Holidays calendar' ?

Hi guys,
I had this problem too. I resolved it by going into System Preferences > Language & Region and making sure the primary language was "English (U.K.)" under primary languages (i.e. at the top of the list of preferred languages).
I always had this set before, but I think upgrading to Yosemite changed this setting to "English" (without the "U.K.) which I guess is a generic "countryless" language. I believe the holidays setting in the calendar needs to know which country's holidays to display.
Hope this helps this waiting for a fix...

Can I show multiple calendars at the same time, as you can in Outlook

I want to use the calendar for a service dept & show several calendars at the same time, vertically, for each person. Is this do-able?

You can do a batch export by sending them to Adobe Media Encoder with the Queue button in the export settings dialog.
However, you will have to set up each export one at a time.

I have an Ipad, Iphone and PC. I have Icloud on the devices. My Ipad and Iphone show all my calendars and the PC will only show one calendar. This just changed recently - why I don't know. How can I get my PC/Icloud connection to show all calendars?

Why won't my PC show the calendars that are showing on my Ipad and Iphone when I snyc to ICloud?

Auditman2012 wrote:
Why won't my PC show the calendars that are showing on my Ipad and Iphone when I snyc to ICloud?
Did you look in the iCloud account on Outlook?

Outlook recurring events not showing in calendar

Syncing my iPhone to MS Exchange.
I see in Outlook 2010 calendars, all the recurring events I have.
In particular, I see some birthdays in the current week, but on my iPhone 4s, running IOS 5.1, I only see a couple.
More explicitly, there are 2 birthdays on the day that I am writing this question, only one shows on the iPhone.
Also, one for tomorrow does not show, nor does an anniversary 2 days after that.
There is no obvious reason for some to show and others to not show.
Additionally, birthdays do not show up in 'Day' view, only in 'List' and 'Month' view.
I have tried deleting my Exchange account and re-adding it.
I have changed all birthdays from 'Private' to 'Normal' confidentiality
I have tried editing events which don't show on the iPhone, in an attempt to make them appear.
I can see appointments I create on the iPhone, in Outlook within seconds.
I delete a test appointment in Outlook and it will disappear on the iPhone.
I am at a loss.
An explanation, or preferably, a fix, would be appreciated.
EDIT:
I found that 'recurring events which are ALL Day Events' do not show on the iPhone.
However, I can search for the event and find it, even though it does not display!

Yes, all of my recurring events that do sync were created years ago in Outlook and I had no problem syncing them to my Blackberry Bold way back when. Initially when I got my iphone 4, everything synced both ways and then this year I got an iPad and intitally everything synced with it via iTunes/outlook with no problem. I've only noticed this problem within the last month or so and it drove me crazy. I reset both my ios devices but I refuse to uninstall and reinstall Outlook or iTunes. I've seen tons of posts on here that say it afffects the cloud, exchange servers and itunes so it's not just us. I've sent feedback to Apple and received no response. Others have too. Apple is aware of it and doesn't have a clue what to do about it. It now affects other events for me so I'm thinking maybe it has to do with default reminders and other things between Outlook and the ios devices. Maybe and update to iTunes or ios6 will change that, who knows. I still love my iPhone and would't go back to Blackberry; it's just way to slow for me.

ICal cannot save new entries in Leopard!! When showing Birthdays Calendar

It happens after upgrading to Mac OS X Leopard. I'll tried the same iCal and Address Book with a Mac OS X Tiger 10.4 and it works fine!
The problem:
- Occurred after upgrading to Leopard
- When turning on the "Show Birthdays Calendar" (in Preferences...)
- Changes in iCal, e.g. new entries, amending existing entries, deleting entries, etc., will NOT be saved!
- It works again if the "Show Birthday Calendar" is unchecked
- It also work with a "small" address book but not a BIG one -- My original one has over 2,500 contacts. If I replace it with a small one, these's no problem encountered.
Appreciate help!

Could it be that the setting Sync Services in Entourage doing the erasing entries?
I am having fits trying to stabilize calendars and sync. Entourage to iCal to .mac to Nokia E61i is an awful chore, often long hours not successful too.

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

ICal doesn't show my calendars, although data clearly sits on my computer

After a system crash, iCal doesn't show my calendars any more. It appears in the same state as when I opened it the very first time, i.e. contains empy "Work" and "Home" calendars.
Yet,
~/Library/Application Support/iCal
contains plenty of data that looks as if it were my calendar's contents, namely in the subdirectory "Sources".
On the other hand
~/Library/Calendars
does not exist. According to some documentation it should've been there.
Luckily, I had only recently synchronized my iPod, and I can still read my calendars from it.
How can I make my calendars re-appear in iCal, either based on the data that are still on my laptop, or from my iPod?? And then, in the future I'll make sure to have a more professional backup. ;-(
MacBook Pro Mac OS X (10.4.9)

I'm seeing the same thing, and I can't even find where OS X stores calendars on disk anymore...

InfoSet in BW 3.x - shows variable calendar day (SAP Exit)

Similar Messages

Maybe you are looking for