InfoSet maintance - added new InfoObject, not available in query

Hi,
We appended a new field to the 0VENDOR_ATTR extractor and the data comes accoss fine. We are using InfoObject 0CREDITOR in an InfoSet. When I did an 'adjust' step to the InfoSet, the new InfoObject became visable but the check box is grayed out and the new InfoObject is not usable in a query. Is there any way to change the check box so that the new InfoObject is available in a query?
Thanks,
John

Hi John,
Change your 0CREDITOR InfoObject and make sure that the 'Attribute Only' box is not checked. You will be unable to make it usable in an InfoSet query if this box is checked. Let me know if this solves your issue.
Josh

Similar Messages

Infoobject not available in the query

hai gurus
We have appended a cube with info object that had a query already on it but that infoobject is not available in query
hw to refresh the query designer to get new appended info object
TQ
KEERTHi

Hi,
Welcome to SDN!
Make sure that your cube is active.
Close your BEx and open again.
Hope it helps.
Best regards,
Eugene

Adding new infoobject

hai
i am adding new infoobject to ods and cube,that have data already.how can i do.i want to delete the data both in ods and cube.if so how to delete the data in ods.

hi..
Unless you delete data from Cube , Data from ODS can not be deleted and this behavior is to maintain consistency of data and subsequent delta updates from ODS to Cube.
You cant delete the data from ODS if data is already in Active table of ODS.
In this scenario you can do only delete the whole data & again upload.
ODS ---> Rightclick -
> Delete
You will have to activate ODS in order to delete data from ODS.
Ideal sequence could be
1. Delete data from ODS
2. Do enhancement in R/3 side
3. Do enhancement in BW side ( add/ remove info object )
4. Activate ODS, Update Rule.
hope it helps..

Mapped characteristics in Multiprovider not available in Query Designer

Hi,
we have a multiprovider with approx 10 cubes and lot of characteristics, Navigational attributes mapped to it. I have added around 3 more characteristics and mapped to underlying cubes. But these added characteristics are not visible in Query designer. Is there maximum limit for the number of characteristics.
Thanks,

Disconnecting the BEx made it work. But i dont understand i added this yesterday in the multiprovider. But i also removed some navigational attributes from the mapping. I will re-map and check. Thanks for the tip.

Hierarchy node not available in Query Designer

Hello Gurus,
I can find the hierarchy node variable in BW but it is not available in query designer. Does anyone know what might be the problem and a solution?
Thanks,
Mark

Hi Mark,
You said you "find the hierarchy node variable in BW but it is not available in query designer".
How did you find the hierarchy node variable in BW? From backend SAPGUI, you will only be able to see the variable in some internal tables like RSZGLOBV. Did you mean this?
For "it is not available in query designer", do you means that when you want to create a hierarchy node variable for this characteristic in Query Designer, you don't find this certain hierarchy node variable in the hierarchy node variable list?
Important thing to notice is that, flat value variables and hierarchy node variables are listed separately. Did you make sure that you have chose to list hierarchy node variables in Query Designer?
Regards,
Patricia

Adding new infoobject to cube with data

Hi experts
Our cube contains data and is fully compressed (E-table), there is are no requests in F-table.
We need to add 2 key figures and 2 characteristics.
The characteristics get a new dimension table.
We don't use the remodel technique. We add these new infoobjects.
There is no need for a reload of historical data for these new objects.
We only need data starting from the first load date after the changes occured.
Are there any errors in this approach?
Thanks

Thomas,
When you are adding a new dimension to your cube - you are adding a primary key to your E and F Fact tables - therefore when your transport goes it - it will reorganize your cube tables.
For this - assuming that you are collecting the changes in the normal way and not changing any settings ....
1. Check the UNDO table space in target system , the UNDO table space should have enought free space available that will be greater than the size of your E and F Fact table sizes - because , the way the transport moves is that a copy of the table is taken in the undo table space in the database and then the tables are adjusted - if your undo table space is insufficient - the transport will fail after some time
2. If this is a big cube - then the transport will take time to go in - if BASIS imports transport requests in sequence - then this transport will hold the queue and might delay others whi have smaller transports.... make sure that your transport goes in last if there are others waiting for you to complete
3. Also inform BASIS that the transport is going to take time - sometimes long running transports can get the BASIS team excited :-)
These are not technical but some bases that can be covered in advance...
Hope this helps.,...

Infoobject not available in "D" version

Hi Friendz..
I am trying to activate the Business contents using report "RSO_BC_INSTALL_ALL". While analysing the log in SLG1, I find that the system shows that some of the infoobjects are not available in "D" version.
Example of error log:
Object '/APC/CHANCD' (IOBJ) of type 'InfoObject' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '/APC/CHANCD' (in transport request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Please suggest the reason for it.
Thanks & Regards,
Surjit P

hi
have you checked the infoonject in object types in BI content tab.click object types and in that choose infoobject and search the infoobject. if its there then drag and drop and install it.
Regards
Dina

Adding New Fields to a BEx Query does not show up in the CR field explorer

This could be a silly question.
I have a CR report based on a BEx query. I had to add a couple of new fields to the BEx query, and when i want to add those fields to the CR report, I don't see them even after I do a refresh in the field explorer.
How do i see this new fields in the CR report?
Help Please
Thanks

Hi,
you can open the report and go to the menu Database > Verify Database.
that should add the new fields to the list of fields in CR
Ingo

Value Ranges option not available in Query

Hi ,
I am trying to hardcode some GL ranges in Query global filter in prodution environment.
But i feel strange the option is not available.
I dev while creating new Query i have the option.
Did any one face this kind of strange problem.
Please adivce.
Thank

HI Kiran,
You don't have authorization to see the value ranges.
Login with other id which have the full permissions and check.It it is problem with authorization.
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

Currency Translation type not available in query.

Hi,
I have a query developed on DSO, but here a currency translation type is missing where as in other queries developed on other
cubes the translation type is available
Is there any note available for this kind of problem or any setting available for this.
Please advice.
Thanks

Hi bhanu,
Did u enable the option of SID GENERATION UPON ACTIVATION?
and tell me the step what have u created ?
and error are u getting ?
Thanx & Regards,
RaviChandra

Personalise value icon not available when query executed from portal

Hi
The personalise value icon is not available when the query is executed from the portal.
Is this the norm or is there anything i must change?
Regards
Shalini

Since you have not given us much information to go on, I will start with the basics...
Have you activated the Personalization DSOs (0PERS_WTE, 0PERS_BOD & 0PERS_VAR)?
If not, you will need to do so in tcode SPRO (SAP Reference IMG --> SAP NetWeaver --> Business Intelligence --> Settings for Reporting and Analysis --> General Settings for Reporting and Analysis --> Activate Personalization in BEx)
Are you running a BW 3.5 query or a BI 7.0 query?
If BI 7.0, the way to set personalization values has changed. You have to open the personalization section of the variables refresh screen by clicking on "Show Personalization Values" at the top of the screen, then move the desired variables down to that section.
Hope some of this helps...
Bob

AP2 new features not available for older cameras

Hi
Can somebody please confirm that older camera's such as Fuji S3 and S2 do not have new raw conversions in the fine tuning adjustments, mine only shows up with the 1.1 or 1.0 options listed, and also the Recovery and Black point sliders are grayed out.
I have no problem with my D2X files, they have the 2.0 conversion options.
Another thing i've noticed is DNG files have an option of 2.0 DNG or 2.0 in the Raw fine tuning box aswell, which one is the right option to choose?
regards
Kiran

Kiran,
Another thing i've noticed is DNG files have an option of 2.0 DNG or 2.0 in the Raw fine tuning box aswell, which one is the right option to choose?
You'd want to choose 2.0 if it's available for your camera. The difference is that this option applies a profile developed to match the specifics of the camera's sensor and image processing firmware. 2.0 DNG applies a generic profile.
Cheers,
Andreas

InfoObject not available as infoprovider in Bex (BI 7.0)

Hi,
I have an infoObject with master Data (0CS_ITEM), which I want to use as an infoprovider to generate a query and display its data.
It is already marked as an infoprovider, however in my Query Designer I am not able to select it to create a new query.
Does anybody knows the reason?
It is activated, and so its compounding infoObject. I tried to find the difference between 0COMPANY(this does works as an infoprovider) and 0CS_ITEM and couldnt find any.
The only thing is that the infoObject is used for BCS and it is updated via BCS module. Not sure if that has something to do with it. I have SAP_ALL, so I guess permissions are not an issue either.
Thanks for any suggestions,
points will be rewarded.
DGF

David, if you can, just try checking the optin "with master data" on the master data tab and on the attribute tab add an attribute and then check it out. It worked for me.

New application not available to other users

My iMac is set up with a separate user account for each family member. My wife has admin priveleges, my daughter's is a general account and my son's is restricted (i.e. kid friendly).
I just installed Rosetta Stone v3 from within my account. I confirmed that it runs properly; the installation was successful. My next step was to check that my family could use the program. Within my wife's account I got the following message: Fatal Application Error 5118. Naturally, my first thought was Permissions. I went back to my account and set the group Everyone to have read/write permissions and set the third menu (Others? Guests? I forget what it's called...) to read/write too. Back to my wife's account; Error 5118. I looked in the Get Info window to confirm the changes took place and they had. I restarted the machine, checked Get Info again (still read/write for everyone) and once again got Error 5118.
I've called Rosetta Stone. Of course they're not Mac-saavy, but they indicate Error 5118 is a permissions conflict.
My question(s): is there any way to ensure that applications I install are available to all users? Do I have to log in as Root (something I HATE doing) to install new applications?
Thanks in advance...
Dave

Problem Solved! Although I had set the privileges for the application, the problem was in HD>Library>Application Support>Rosetta Stone. By setting that folder and its enclosed folders to read/write for everyone, the fix was in.
It's too bad that I had to do any of this. The installer should have adopted the permissions from the folders it installed into. Grrrr.
BTW, the error message was a Rosetta Stone message, not a Mac OSX message; I didn't make that clear before.

Why is the new update not available for iPhone 3g?

My iPhone has not had an update for months, yet the new operating system is available for all models except mine!
Is it going to become available?

no never
same deal with my ipod touch 1g
it's at the end of the line
but the fact that they will never get updates again does
not change the function they provide right now
older ios hardware cant handle the newer fimrware updates
even many iphone 3gs people are complain that ios5 is running slowly and wish to downgrade

InfoSet maintance - added new InfoObject, not available in query

Similar Messages

Maybe you are looking for