Infoset on One Master Data InfoObject

Hi,
I have an InfoSet created on one Master Data Object (ZCUSTOMER). ZCustomer has many attributes.
When I execute a query to display Customer Hierarchy on this InfoSet I get all the accounts.
Now, when I create the same query on the Zcustomer directly and execute, I don't get all the accounts.
Please help me understand why?
Regards
Bhargava

Hi,
I could resolve the issue.
Thanks & Regards,
Madhav

Similar Messages

Overwrite data of master data infoobject

Hi all,
We have one master data infoobject ZASRYHMA. This infoobject does not have any attrbiutes but it has two compounding fields ZSITE and 0DISTR_CHAN.
Now customer has a requirement in which value of ZASRYHMA can change for a particular site and distribution channel. Generally if this value changes then system creates a new entry in tables /bic/pzasryhma and /bic/szasryhma.
What they want is to overwrite the existing entry.
Is it possible to achieve? It's a master data infoobject.
Please provide your kind help.
Regards,
Nilima Rodrigues

Hi,
You have three fields as key field in table as shown below along with values,
ZASRYHMA     ZSITE         0DISTR_CHAN
A-1                     B-1            C-1
A-2                     B-2            C-2
now if you want to change the value of say second row to
A-3                    B-2             C-2
right?
This is not possible just by overwritting in the info-object master data. Because these are key-fields system will treat A-3 as new value and create new entry, on top of this your A-2 master data values must have been used in transactional data.
Only way I can think of is to delete the transactional data where ever A-2 is used and then delete ZASRYHMA master data and then upload master data for ZASRYHMA with new values. And then transacional data.

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

Impact on Master data Infoobject

Hi Bwers,
Currently we are making changes to exsiting master data infoobject (Business partner) in the system through adding one more Attribute. And we are including 2 new info objects to exsiting DSO also.
I was asked to investigate impact of these chanes in systems. Pls provide your valuable suggestions about this activity.
1. What about the impact on other info objects (say 0CUSTMOER) which is reference to Bussiness partner.
2. If any infoset incluing this infoobject, what is the impact on this Infoset / Multiprovider.
3. If Business partner has been used as a navigational attribute for any other Infoobjects.
Impact on DSO:-
1. Impact on above data targets.
2. And transformation between DSO to above all the infoproviders.
How to investigate this things in the system.
Regards,
Venkat

1. What about the impact on other info objects (say 0CUSTMOER) which is reference to Bussiness partner.
> Adding an Attribute to wont affwct 0Customer.
2. If any infoset incluing this infoobject, what is the impact on this Infoset / Multiprovider.
> You need to adjust your inoset/MP. In case you want this attribute in the report, you have to select this object in infoset/MP.
3. If Business partner has been used as a navigational attribute for any other Infoobjects.
> It can still be used like that.
Impact on DSO:-
1. Impact on above data targets.
---> need to activate the DSO and load the data again. Need to change the transformation as well.
2. And transformation between DSO to above all the infoproviders.
> Those will get inactive. You have to activate it again.
Thanks...
Shambhu

Steps to create customized Master data infoobjects in BI 7

Hi all,
Can anyone please send the detailed steps to create customized master data infoobject in BI7,and also the data is to be extracted from two different datasources from two different source systems.
Regards,
G.Monica Roja Flora.

Some data modelling tips while creating master data infoobject and extracting data from different source systems -
If there are identical characteristic values describing different objects for the same characteristic in various source systems, you have to convert the values in such a way in SAP BW so as to make them unique.
For example, the same customer number may describe different customers in different source systems.
You can carry out conversion in the transfer rules for this source system or in the transfer routine for the characteristic.
If work involved in conversion is too great, you can compound the characteristic to the InfoObject Source System ID (0SOURSYSTEM). This means it is automatically filled with master data. The Source System ID is a 2-character identifier for a source system or a group of source systems in BW. The source system ID is updated with the ID of the source systems that provides the data. Assigning the same ID to more than one source system creates a group of source systems. The master data is unique within each group of source systems.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6399e07211d2acb80000e829fbfe/content.htm
Hope it Helps
Chetan
@CP..

Updating the Master data Infoobjects attributes from the Portal

Dear All,
There is a requirement where through portal i want to retrive the master data infoobject ( based on the value seleceted for that infoobject by the user ) and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say 01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40 and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
Is this possible through portal and BW?
Any idea on this would be appriciated.
Regards,
Ankit

Hi Ankit,
this is a quite tough but not impossible requirement. Maintaining Master data is possible with Visual Composer and some function modules (at least that's one way I know). However it could be a bit complicated maintaining attributes Master data depending on your data model. This How might help getting familiar with this topic:
Maintaining BI Master Data with SAP NetWeaver® Visual Composer
Good luck.
Brgds,
Marce

Attr Change Run Master Data Infoobject PChain

In the master data process chain process type Attribute Change Run which is usually at the end of the chain updates the changes in the master data infoobjects.
The Chain is usually designed with full infopacks and say if it is scheduled every night , isn't it loading the master data again ( duplicating ) and again even though considering the process type Attribute Change Run at the end.
Is it like just the attribute change run is executed for updates ?If thats the case why do we need a process chain for Masterdata...if its only one time full ..that can be done manually right?
Am I missing something here ...?

If you look at the detail in the Monitor for a Master Data load, it will tell you how many recordssent from R/3 and how many records were updated and inserted.
As far as static master data that deos not regularly have new records or changes - you're right you don't need to load those objects daily, they could be loaded perhaps monthly.
You might consider balancing how fancy you try to get with breaking up master data into different groups, loading some daily, and other sweekly, others monthly, etc. In our case we use to have a fairly elaborate master data load schedule, loading someobjects 1st Tuesday of the month, others 2nd, Tues, others 3rd etc, and then we had weekly loads and dailys. When I began to review the run times involved, it was apparent that the various monthly loads, in total, ran less than 10 minutes, so I just consolidated the 4 differently monthly maser data loads and the weekly loads all into a single process chain. While much of the this master data doesn't change much, it was much easier to just schdule mastr data either daily or weekly, rather than getting too elaborate.
Now if run time of master data loads or change runs sarts to become an issue, then you might have to adopt a more elaborate schedule. It really depends on your environment.

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

Master Data is in Revised Version while transporting a request to add an attribute in existing master data infoobject

Hi Experts,
I am facing short dump when trying to send a request to add an attribute in Master Data Infoobject from DEV to QA.
Although the attribute is getting added to main Master data Info object but main master Info object is in Revised Version.
I have been searching the solution in SCN from couple of days and tried every single solution but none of them works for us.
When I check in se09 I am getting the following message
Program terminated (job: RDDEXECL, no.: 09445401)
   Execution of programs after import (XPRA)
End date and time : 20150420094559
Ended with return code: ===> 12 <===
When checking in ST22 IN QA I am getting the following message
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
When I checked in ST22 in QA I am getting following dump
   31         RAISE EXCEPTION TYPE cx_rs_program_error
   32           EXPORTING
   33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
   34     ENDCASE.
   35
   36 *   get table name from DDIC
   37     CALL METHOD cl_rsd_odso=>get_tablnm
   38       EXPORTING
   39         i_odsobject = n_infoprov
   40         i_tabt      = l_tab
   41       IMPORTING
   42         e_tablnm    = l_tablnm
   43       EXCEPTIONS
   44         OTHERS      = 1.
   45
   46     IF sy-subrc <> 0.
   47       RAISE EXCEPTION TYPE cx_rs_program_error
   48         EXPORTING
   49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
   50     ENDIF.
   51
   52     CALL FUNCTION 'DDIF_NAMETAB_GET'
   53       EXPORTING
   54         tabname   = l_tablnm
   55       TABLES
   56         dfies_tab = l_t_comp
   57       EXCEPTIONS
   58         not_found = 1
   59         OTHERS    = 2.
   60     IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
   62         EXPORTING
   63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
   64     ENDIF.
I have attached the short dump
Thanks In Advance
Rashid

Hi Tom
Thanks for your reply.
I am not sure what do you mean by Manually activated in Dev or QA . If you mean Dev then i did and also maintain the infoobject related tables using transaction SE14 but still same error.
But if you mean in QA then QA is lock for manual activation but i tried though program RSDG_IOBJ_ACTIVATE but again failed. I also maintain the infoobject related tables using transaction SE14 but still same error.
Regards
Rashid

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Creation of Master Data InfoObject

Hi All,
I need to modify 0COMP_CODE Master data Infoobject, with adding some fields as attributes.
I need to add few fields to 0COMP_ CODE, based on tables.
And 0COMP_CODE should pull data from source tables while used at reporting.
Can you please help me on this.

Hello Sri,
You can add the required inobjects in the Attribute tab of 0COMP_ CODE masterdata object.
Also mark them as Navigational if you want them to be used in reports for drill down, navigation etc.
Now either you can enhance the masteradata datacource for 0COMP_ CODE in source system or create your own custom datasource. If you are modifying the already existing DS them you would have to write ABAP code in CMOD for those fields you are adding to 0COMP_ CODE.
Replicate it to BW. Activate the datasource. Create transformations(modify transformation in case you haev modified the already existing DS) to update these new fields to 0COMP_ CODE masterdata attribute.
Now rest of the things are same, like create DTP or IPs etc.
Now as you would have marked these new objects as Navigational in 0COMP_ CODE masteradat attributes tab, you will be able to use them in query design.
Hope it helps...
Regards,
Pratap Sone

Best practice UOM changes for one master data

Hello ALL,
What are the best practices must be followed while changing one master data UOM data.
for eg i have two UOMs respectively,
basic UOM = EA another one ia Alternative UOM CAR . 1 car = 10 EA.
now my master data team deleting this CAR via MM02 .
what are the follow up actions we should follow.
(1) for eg i have contract existed for thi smaterial as CAR
(2) I have many POs without doing GR
like wise can you list what are the impacts in the system.
how we can go ahead.
What are the best practices followed while this UOM changes for your customer.
br
muthu

Hi Ravi / tao
Yes . I am deleting alternate UOM CAR in mm02 .
I created a contract for that material in CAR .
my contarct also refered in source list.
share your views.
what happen to my open documents.
What happen to open documents ? .. System may not allow me to do GR right?
br
muthu

Duplicate records in master data infoobject...how to delete it...pls help

hi all,
how to delete duplicate records in master data infoobject which has no requests because it is a direct update?

Hi,
Right click on the info object and
select Maintain
in that you will get the Master data table
from that select the Record and delete it.
hope this solves your query.
reward points if useful
regards,
ANJI

Request deletion from Manage-Master data infoobjects

Hi All,
I have a master data infoobject, for which i have created a process chain for deleting the data. I am deleting the P and S table in a program.
When i run this chain data is getting deleted from the tables, but i see the request (green/red/yellow) in the manage section of the infoobject. I want to delete those entries as well from the manage section.
Any inputs ?
Regards,
Sandeep

Hi,
to delete those entries you will have to delete the entries from standard SAP tables...all the tables begining with RSREQ stores the information about the requests...but you may not have authorization for that...
did you tried RSDMD_DEL_BACKGROUND or RSDMD_DEL_MASTER_DATA_TEXTS function modules....you can use in the program and use at as a ABAP variant in the process chain.
Thanks
Ajeet

Infoset on One Master Data InfoObject

Similar Messages

Maybe you are looking for