Infoset query creation

Hi
Expert
I want to know how to create infoset query in SAP CRM i request you to kindly provide some basic steps to initialize this
thanks in advance
vinay

Hello Vinay,
You have three transactions to accomplish this.
SQ01 Is to create the query itself
SQ02 Is to create the infoset that can contain queries.
SQ03 Is to create the user group
First things first:
1. SQ02 Create an infoset and define the master join table (for joined queries) or the master table for queries on a single table. Remember that all the tables you might need in the queries you create in this infoset must be defined here! Once you have assigned the necessairy tables, define the fields you'll need for these tables.
After this is all done, generate the infoset.
2. SQ03 Create a user group. Then assign all the necessairy users that are allowed access to the user group and the infosets that are contained in the user group (so assign the infoset you just created in step 1)
3. SQ01 Enter a query name and press create. Now your infoset should be listed in the input help (if not, make sure your username is assigned to the usergroup you created in step 2)
Now you can start creating your query!
Hope this helps you on track!
Provide points if useful.
Kind regards,
Joost

Similar Messages

Additional fields in infoset query can not be used as datasource fields

I create one infoset query with additional fields (using ABAP code) in R/3. When I create datasource RSO2 using this infoset query, system only show all fields without additional fields that I enhanced in infoset query. Does that mean we can not get additional fields information in generic datasource creation that we enhanced in infoset query?

dear Awa,
you are enhanced some fields in r/3.right that fields are shown in
rsa6 select your data source click on display your datasource then select
extract structure its shows how many fields are haveing particular
datasource .or otherwise goto rso2 select your data source display
double click on your extractstructure its show how many fields haveing
the particular datasource. check the Rsa6 what ever fields you newly added that field default hide mode
you remove the hide tickmark.

Query Creation

Dear All ,
This is regarding Query Creation.
I want to create Query by Joinging Two tables.
I have created User Group, Created Infoset,
Now am creating Query by SQ01.
Going Step by step correctly.
I have Tick mark on Field group and selected .
Then By next screen i have marked for option for Parameter.
Then Clicked on "BasicList" Button.
Now after clicking Basic list button i am not getting screen of Basic list Line Structure
i.e Scrren with detais like with heading of type Field , Line ,Sequence, Sort Total etc. i am not getting.
Instead, After Pressing BasicList button i am getting screen like Query ...... layout Design.
So where /How cani get Scrren of Basic List Line struecture.
In which menu / option i have to check.
For Information we have SAP ECC 6. 0 with Application support Package no. 14.
PL help me for my probelm
Regards
Swati

Hello,
I got solution of my probelm.
Removed Tick Marked from Menu option Settings --> Setting -
> Here removed tick mark from Graphical Query Painter.
Thanks to all.
Regards
Swati

Sapquery , adhoc query and Infoset query

any body having any material for ADHOC QUERY , SAP QUERY and Infoset query with detail explanation and steps for creation.
plz forward it to me??????????

hi,
   sap query r used to design reports to see the data according to our selections in this daa is fetched from diff tables its much easier to desing reports using this
             infoset query is somthign used with BI ints used to read data form PSA some temp storage loc
           if i am wrong someone correct me
reward if useful
ravi

What is an infoset and infoset query?

hello can anyone tell me about
infoset and infoset query.

Infoset is based on Joins. Infocube, DSO and infoobject can be used to make infoset.
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button   - go out
TC SQ03 - Select user group -   eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness.
If this answer helps, pls assign points.
Thanx in advance.

Generic Data source with Infoset Query

Hi All,
Please provide me the links or PPT's or Information or PDF's for the creation of the Generic Data source with Infoset Query or
Please explain in clear steps how to create Generic Data source with Infoset Query.
Thanks & Regards,
Ravi

Oopps...being a BI guy, always think of BW
I have never created, though I will suggest to follow this:
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR u2013 PM u2013 Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset u2013 Create u2013 enter name of Infoset - Data source -- > Table join by basis table u2013 give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables u2013 give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
TC SQ03 - Select user group - eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness..
Thanks...
Shambhu

Infoset query BI 7.0

Hi All BW gurus ,
i want a clear picture how to create an infoset query and when to go for infoset and infoset query in GENERIC Extaction . anyone pls send the screen shots how to create and extract data to bw side from infoset query ,
my email is [email protected],
100% points will be assined to the gurus
regards
Sherwin

<b>Look at</b>
http://help.sap.com/saphelp_erp2004/helpdata/en/92/43ec39d0383f09e10000000a11402f/frameset.htm
Re: Infoset
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=199410&messageid=2217326
https://www.sdn.sap.com:443/irj/sdn/thread?threadid=189150&messageid=2113030

Infoset query of vendor payments at the cost distribution level

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIIT & FMIFIHD). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table do not work well. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
It would be ideal to have vendor in BKPF, like FMIFIHD has, but it isn't a field.
Does anyone know of any other options? I have seen the helpful thread on How to Read BSEG Efficiently

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Infoset query of vendor payments at the cost distribution level of the document

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
Does anyone know of any other options?

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

Crystal report from SAP infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query. When I run the report after passing the parameters it gives me an error "Database error occured" "Parameter field value does not exists" "RFC Closed"
But if I run the same Infoset query from SQ01 I am able to run it with same paramenter and it returns many records.
To be very precise I am running the best practice crystal report "Cost Analysis - Planned vs. Actual Order Costs" which is based on infoset query CO_OM_CA_20_Q1.
It throws me error that "Controlling Area does not exists".
Did anyone faced similar problem?
Best Regards,
Chetan

Hi,
log into your SAP ERP system using the SAP GUI and choose in the SAP Menu the following path:
SAP Menu -> Accounting -> Controlling -> Cost Cetner Controlling ->Environment->Set Controlling Area.
Set the desired controlling area for your user there (DO NOT FORGET TO CLICK ON THE DISKETTE ICON) and try again.
Regards,
Stratos

I am facing a problem in a crystal report which is based on Infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1
Best Regards,
Srinivas

Hi,
I would first of all suggest you don't open the same question twice. this looks like a duplicate to this entry:
Best Practices v3.31 - SAP InfoSet Query connection
Did you assign the queries and the infosets to an InfoSet user group and you assign the SAP account to it as well ?
Ingo

I am facing a problem in a crystal report which is based on Infoset query.i

Hi All,
I am facing a problem in a crystal report which is based on Infoset query.in the Cost Analysis - Planned vs. Actual Order Costs
There are two querys like Query: CO_OM_CA_20_Q1 and InfoSet: ZBPBI131_INFO_ODVR. I build infoset query based on sap best practice user guide but problem is not able to find CO_OM_CA_20_Q1

Please re-post if this is still an issue to the Business Objects Integration Kits - SAP Forum or purchase a case and have a dedicated support engineer work with you directly

How to delete Infoset Query in R/3

Hi Gurus,
I created a Infoset using SQ02 in R/3 and generated the query. Now I need to delete that Infoset query. Please advice me how to delete infoset query from the functional group in R/3.
Thanks
Liza

Hi,
In SQ01 ,press shift+F7 then find your user group. then from infoset query tab ,select ur infoset.
and try to delete , I think, it should work.
Regards
CSM Reddy

Issue while extracting data using Gen DS of Type Infoset Query

Hi All,
We have a Generic Data source created using the Infoset query. I get some data discrepency when i am extracting the data with the same DS. The data for the Field Amount in the R3 and the PSA is different. When i try to check the same using the RSA3 T-Code i am unable to execute the Gen DS in R3 production where as its working fine in R3 Dev, and i am able to execute the other DS in the R3 production using the RSA3 T-code.
My concerns ::--
1. if the DS is working fine in R3 Dev in RSA3 the y i am facing the problem in Production.
2. Y i am getting the different data in R3 and PSA since PSA shuld be the replicate of R3?
3. How can i resolve this problem.??
Thanks in Advance
Regards

Thanks venkat,
I am having the authorization to execute the query in R3 production, As i am able to execute the other DS in RSA3 . But not able to execute this DS i had also checked it is active n working fine when loading the Data.
There is only one routine ie to transfer rule from lower to upper of a char value.
As der r routines in Update Rule but i have to get the same data in PSA which is der in R3.
The Routine of Update Rules will be executed when loading the data to the Targets right so the data may b vary in Data targets but y i am getting different data in PSA .
Pls thru some light.
Regards

Runtime error while executing infoset query

Dear Experts,
When we execute infoset query we get following dump :"
" An SQL error occurred when accessing a table."
Database error text........: "ORA-25153: Temporary Tablespace is Empty"
Internal call code.........: "[RSQL/FTCH/EBAN ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"/1BCDWB/SAPLIQG000000000015" or "/1BCDWB/LIQG000000000015U02"
"/1BCDWB/IQG000000000015EXTR"
can any one hve idea about the above error.
With Best Regards,
Jaspal

Hi Jaspal
Looks like a BASIS issue.
Check with BASIS, they need to regularly monitor the tablespace and file system, at OS level
Regards
Madhan D

Infoset query creation

Similar Messages

Maybe you are looking for