Infoset query in BEx analyzer
Hello,
we have a query on an infoset based on an infocube and infoobject. When running the query directly in web, the data is shown. When we run the query in BEx, we get "No applicable data found" . Is there some setting we forgot or are there issues with Infosets and BEx?
Thanks!
Hello,
Try to run the query with transaction RSRT2.
Probably youwill experiencing the same message error.
Porbably you are using different users, with different roles/authorization.
Associate SAP_ALL and BI_ALL for the affected user. If works, there is something wrong with the user's roles.
If the issue remains, open a message to BW-BEX-OT-OLAP component.
Best regards,
Edward John
Similar Messages
-
Error in running query in Bex Analyzer
Hi All,
I faced some problem in running the query in Bex Analyzer, when I run
the query in the Bex Analyzer, there are error messages indicates that
the query is fail to load. Before that all the query can be run without any problem.
The details for one of the error msg are as follows:
<b>Diagnosis
Variable 0P_MATBK has the processing type "Manual Input/Default Value".
However, it is not input ready, and no default value has been specified.
System Response
Procedure
Make the variable input ready or specify a default value.
Procedure for System Administration</b>
Any1 can help? Thanks.Take a look at this link...
http://help.sap.com/saphelp_nw04/helpdata/en/55/589b3c494d8e15e10000000a114084/content.htm
For the variable wizard...
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56a7e09411d2acb90000e829fbfe/content.htm
To make it Ready for Input...
In the variable properties window, Check "Ready for Input".
Message was edited by:
Jerome -
BW Server Error when running Query in BEx Analyzer
Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
<b>ERROR MESSAGE</b>
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant -
Error Message while opening workbook or Query in BEx Analyzer
Hi all,
Whenever I try to open any workbook or query using Bex Analyzer I get an error message saying "Serious error occured while reading history folder" Message class RSOBJS, number 170. But this doesnt stop me from opening the workbook or the query.
Kindly help me to suppress or eliminate this message. I am not able to find this message in the list of messages available in RSRT either.
Thanks and Regards
Mui KanvaHi Mui Kanva,
Does your problem occur in a copied system?
I have same problem in our Quality-BW (copied from productive system). WE are in our QBW not able to activate personalization correct and get the same error messages. I suggest the reason in the fact, that the source-system Myself (QBW) does not work correct. This reason causes that export data sources could not be activated via RFC-Connection.
Please check to activate your source system?
We accept the error messages in our QBW and did not activate the RFC connection.
Regards
Andreas -
Iam Facing an error whenever i run a query in Bex Analyzer
Hi All,
Whenever i run the query in bex Analyzer iam facing an error as
*Error reading the data of infoprovider*
*Error in BW :error creating Index*
*Enter an rfc destination*
*The following error occured during parallel processing of query 67.* Please anyone help me on this.
Thanks & Regards
Sameer KhanHi Sameer,
There could be several reasons for this error. Based on the first message you got
*Error reading the data of infoprovider*
Please check that you have the requisite authorizations to execute queries on this infoprovider
Naresh -
Unable to open Query in Bex Analyzer
Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek -
Problem opening a query in BEx Analyzer 7.10
Hello,
we have problems with the BEx Analyzer, an empty screen is
displayed when we open a query.
I'm going to explain the steps:
We open Analyzer, goto open query, logon into BW window appears and then, before the screen to select query from an Infoarea, roles, etc is load, the Analyzer seems to open the SAP Logon and an empty screen from R/3 appears.
We can not close this R/3 empty window, only when we close the Analyzer this windows is closed.
The problem happens with the SAP GUI 6.40, so we updated to
SAP GUI 7.10, installed patches, addons and windows/ office
patches but the problem persists.
How can we solve this issue?
Thanks in advanced.
Best regards,Yes, I have done all the installations that the notes said and the pre-requisites:
- Microsoft .NET Framework 1.1 + .NET Framework 1.1 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 1.1.
- Microsoft .NET Framework 2.0 + .NET Framework 2.0 SP1 + Hotfixes and windows update + Microsoft Visual J# .NET Framework 2.0.
- Microsoft Officce 2003 patches (KB907417, KB945185) + Office 2003 SP3
- bi710sp03_300 and bi710sp04_400
- gui710_6-10002995.exe and kw710_1-10004321.exe
But the problem persist.
I have executed BI Frontend installation check tool (sapbexc710.xla) and seems everything is OK.
Regards, -
Unable to access query in Bex Analyzer
Dear All,
Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
Thanks and Regards,
Jyoti AryaHi,
please get required approrvals from client or business team.
Later seek basis or security team help to get required authorizations.
Thanks -
CL_RSR_REQUEST eror while running the Query in Bex Analyzer
Hi All,
I have created the Query and assigned it to the role by using PFCG and also by Query Designer. when the user executing this query using the Bex Analyzer he is getting this error.
CL_RSR_REQUEST and Form TEXT_ELEMENTS_GET:Variabl"
Your input is appreciated
Thanks in Advance
RegardsHi all,
I had assigned the query only to the role. when i checked with user id i found error.
You do not have the authorization for component ZMM_PO_Q1_2
Message no. BRAIN800
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you
authorization for the editing of this component. The function is
protected by the object "Business Explorer - components" with th
following fields:
- InfoCube ZMM_POD
Type of a component REP
Component ZMM_PO_Q1_2
Activity 16
for this what i have to do .. i had also checked in the su 53 t code.i showing the previous authorization is successfulll..
regards -
Problem in opening a query in BEX analyzer..
i am using front end sap gui 7.20 with patch 9..
my issue is that when i tried to open a query in bex analayzer. i get following error stating that
you donot have suffiecent authorizations for the infoprovider XXXXXX
function module /SDF/AL_MAP_TRANSID_LOGH does not exist
and i tried to open a query from bex query designer ..i am not able execute it
and i get strange error while executing tcode rrmx..the status error states that microsoft excel is not installed, install microsoft excel viewer
after installing microsoft excel viewer also..i get the same error...
pls suggest asap guysHi Satish,
You can ask yur tech support team to install sap gui and in specify them to tick "SAP BW add ons".
also Enable the macros for the analyser.
Regards
Rahul -
Error when opening query in BEx Analyzer BI7
Hi all,
I get the following error when I open a query in the Analyzer.
<b>Unable to convert character set 4103 to character set 4103. possible.</b>
Afterwards it closes the connection.
Any help will be appreciated.
Cheers,
Meurant.Hi Meurant,
Most likely it is a mismatch between your Client GUI and sever.eps
The following steps helped in some cases.
1) Uninstall the SAP GUI on your m/c.
2) Upgrade all you operating system patches to the required level...If it's Windows XP.....just
get the latest updates from Microsoft.
3) Re-install GUI for 7.0
Good luck, BB -
Cannot execute a query in Bex Analyzer
Hi,
I installed SAP GUI 710 (patch level 8) and I have no problems going into Bex Query Designer but when I try running the report in Analyzer, it doesnt work. I get the selection screen and when I click on enter, i get a blank screen (the data is not displayed. I remember in previous versions of excel, you had to do something to the macro security settings. I am using Excel 2007.. Can you help? Do I have to do anything elseIn Excel 2007, choose excel options under the Office ribbon menu. Choose Trust Center. Select the button Trust center settings. Select Macro Settings in the left pane and choose Enable All macros and check the check box for Trust Access to the VBA project object model.
-
Authorization issue while opening the query in Bex Analyzer
Hi All,
I get the below error mesage while executing a report.I have executed the same query in RSRT and i get the below message.
I have created some roles and added to a test user for testing purpose and when i log in as a tets user i get the below meesage.
I am not sure what i am missing in the roles.When i tried executing the query in my id then no issues.
No authority for the node from characteristic 0EMPLOYEE__0MAST_CCTR, hier
Your user master record is not sufficiently maintained for object Authori
Kindly let me how to overcome this.
Thanks in advance.
Regards,
KumarHi Harish,
Just check this query by this way:
Use Tcode RSECADMIN -> Analysis ->Execution as -> In Execute as user: Put your Test user Id also tick With log and select RSRT. Now use Start Transaction.
Might be the chance to get more details about this issue for resolution.
Also ensure, Have you did the User Comparison while assigning test user id in role?
Regards,
Abdullah -
Problem in executing query in browser and bex analyzer
i am not able to execute query in browser nor bex analyzer...
problem is that i dont have option to run in bex analyzer in query designer (menu bar seems missing in query designer and how can i get enabled
and when execute the query in browser using bex query designer ..it prompts me with following error
URL http://saperpdev.saperpdev.com:8002/sap/bw/BEx call was terminated because the corresponding service is not available
Note
■The termination occurred in system ERD with error code 403 and for the reason Forbidden.
■The selected virtual host was 0
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SAPERPDEV_ERD_02-v:0-s:403-r:Forbidden
and i tried to open the query from bex analyzer level
it prompts me as follows
macros are disabled because the security level is set to high and digitally signedtrusted certificate is not attached to the macros,to run the macros change the security level to lower settings
pls suggest mehi suman,
thanks for your response.. but let me be more clear
i am using sap gui 7.20 front end and when i execute rrmx i am able to navigate to BEx analyzer but when i tried to open a report which i create i get following error message..
you do not have sufficient authorization for infoprovider zic_proj
function module /SDF/AL_MAP_TRANSID_LOGH doesnt exit
second thing is that i tried from bex query designer to execute the report ..but i am not able to execute the report...
i hope some connections seems missing..please let me know what to do ASAP..
and where can i post this question to get fast reply -
Query not Opening using Bex Analyzer
Hi Experts,
We have developed queries in Designer, and we can execute them from query designer.
But if we try to run the query from Bex Analyzer no query output comes.
Output comes as No Data Available.
This issue is happening from past 3 days..before that we were able to execute from Analyzer also.
I am wondering has any setting is changed.
Kindly suggest , as this is very important for us to solve ASAP.
Thanks
MayankHello,
After applying the latest patches for core GUI and BI components, and the MS Office patch (sap Note 1025122), it should work correctly. I have faced the same issue and corrected it by applying these patches. (The MS office that I am using is MSOffice2003.)
Can you try opening the analyzer from the start menu, instead of using transaction RRMX?
If this way it is working correctly, then the softwares pieces are setup correctly.
Then you may want to check the customizations of your BI system. i.e. IF it was upgraded from the BW3.5 system? What strategy are you using for the report migration? The administrator might have changed the settings according to the strategy and current phase of the report migration.
Regards,
Maybe you are looking for
-
Prevent Apple TV from playing explicit music via Home Sharing
Hi. I have Home Sharing enabled on my Mac and on my Apple TV. Through the "Computers" icon on the Apple TV, I can watch all my Movies, TV Shows and listen to all my music. I have now bought a second Apple TV for my son for his birthday. He is only 12
-
Insufficient priviledge when creating index
upon creating new indexes, using the command : create index im_art_s_idx_2 on article(cl_story) indextype is ctxsys.context; i get the following error : create index im_art_s_idx_2 on article(cl_story) ERROR at line 1: ORA-29855: error occurred in th
-
Tracking Contact Person Changes in CDHDR
We have 2 SAP Systems - one for development and one for production. When changes are made to customers (debitors) using transaction VD02, these changes are logged in the table CDHDR (objecttype='ADRESSE' or 'DEBI'). In both systems this works fine. H
-
What do I do when I get a message from iTunes and it won't let me download music
The message is MZCommerce.CreditBalance Mismatch.Mobile_message
-
HT3819 Missing Home Share Buttons in Video App
In the Videos App there use to be a shared library button at the top to retrieve your movies on iTunes. Why is this button missing now?