Infoset Query -- Selection Screen Text

Dear experts,
I hv created an infoset query. every thing is working fine except the selection screen text.
It is coming like
"Date on which the record was"    instead of
"Date on which the record was created".
Is there any way we can manage the selection screen texts in infoset query.
Regards,
Jaspal Kumar

Hello,
In the Infoset, click table -> field, double click on field and you see the field technical & label information, change the Field label there.

Similar Messages

  • F4 search-help in infoset query selection-screen fields

    Hi all,
    I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
    How can I do this?
    I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
    Can you help me? I never done this before, so I really don't have a guess.
    Thanks in advance.
    Beste regards,
    Sónia Gonçalves

    Hi all,
    I have found thread  that helped me a lot in this issue.
    I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
    Isn't it possible to include it in the "Report-specific selctions"?
    Thanks in advance.
    Best regards,
    Sónia Gonçalves

  • Infoset-query-selection-screen-default-values

    Hi All,
    I am having the requirement as I need to put default values in the selecion-screen of the report by using  Infoset query. Let me know the settings required for this.
    I am using SQ01, SQ02, SQ03 T.Codes.
    And I need display  one record only if any field contains mulitple records, for example in the HR-ABAP, field p0105-usrid contains multiple values depending on the subtype.So, I need to display USRID when URSTY = '900'. All these should display by Infoset query only.
    Pls help me in this scenario , its an urgent requirement.I am very much thankful for you for reading my proble, if you will provide some sort of solution, I feel very happy.
    Advance thanks for this .
    Regards,
    Prakash.

    Prakash,
    To default the values on your selection screen, you will need to do some ABAP I guess. (if you do not want to use variant). Open up the infioset in SQ02 and then goto code option for the PNP**** field and then you can code to initialize the selection screen variables. Test with an ABAPer.
    To display multiple records as multiple columns, you will have to create custom fields in infoset, and then go from there. Again see ABAPer.

  • Infoset Query Selection Screen

    Dear Experts,
    In an infoset query. how to split the Selection Screen into different screen areas (Blocks).
    Means, presently the Selection Screen is having 20 fields together under single block.
    I want to group them into different blocks with respective Headings.
    How to do it?
    Regards
    Jogeswara Rao

    Hello Jogeswara,
    Go back to the infoset using SQ02.  On the "Change Infoset" screen, go to the "Field groups" section.  You may have to click the "Field groups" pushbutton.  If you right-click on the field group, then you can create, change or delete a field group.  Add fields to a field group by dragging field from left-side of screen and dropping on the right-side of screen.
    Kind Regards,
    Rae Ellen

  • Infoset Query Selection Screen Issue

    Dearf Experts,
    I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
    I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
    The output screen is incontrol and showing all the fields as per my specifications.
    My problem is the Selection Screen. This is displaying to many things not desired by me.
    1. Two tabs (I do not expect any tabs)
    2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103) 
    The screen area of my specified fields in at the bottom.
    My expectations about the selection screen is - just like simple one as in the case of SQVI.
    Please help me in getting through this problem.
    Regards
    Jogeswara Rao

    Gungor Ozcelebi,
    Thank you very much for responding,
    Exactly as you said, I am using Notifications logical database.
    (I was suspecting this reason)
    Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
    My trials to delete them were invain. They reappear while saving.
    I would be very thankful, if you help me in this case.
    Regards...

  • Download and upload selection screen texts

    hello,
           My requirement is to upoad and download selection screen texts from one system to another..
           How do download  the selection screen texts from program to the application server and then upload them on another system. I am writing a bdc to carry out this process...
          Please help me out with this..
    Thank you,

    Hi,
      Why don't you just transport it? If it is linked you can asked basis to set the transport part and link it. If it is not you can download the transport and import it on another system.
      If you still need a program to do that. You can use SAPlink on [http://wiki.sdn.sap.com/wiki/display/ABAP/SAPlink]. SDN provided such code already just download it and implement it on both of your system then you can copy a program with selection screen.
    Cheers,
    Chaiphon

  • Check box in SAP Query selection screen

    I want to keep 2 check box in SAP Query selection screen.
    could you please tell me any one.
    regards,
    kumar

    Hi Vijay,
    If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
    You can find the name of the generated program of the query when you execute the query.
    Reward points if useful.
    Regards,
    Atish

  • Is there any option to display selection screen text in bold or big font?

    Hi all,
    Is there any option to display selection screen text in bold letters or with increase font size?
    Thanks n Regards

    Hi,
    Just give atry in this way..
    open the same program ans selection-screen screen no will be 1000 in se51 screen painter,
    go to properties of the texts u want to change then go to display tab and check the checkbox bright.
    it may or may not work but this will work in module pool .
    just give a try...
    Regards,
    Suresh.

  • BEx query selection screen takes long time to popup

    Hi,
    I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
    The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
    I have run the statistics of the query and according to the statistics report the query takes a  lot of time for the following component :
    OLAP: Query Gen.     2681,312682
    I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
    I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
    What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
    Please advise how to proceed.
    Thanks in advance,
    Arash

    Hi,
    Please check the following notes which should be useful.
    1387593 - Performance optimization for query change/generation
    1416737 - Performance optimization for query change/generation(2)
    1396485 - Performance optimization for query check/save
    Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
    1472915, 1506560) and repair/correct the different tables to optmize
    the query definition tables.
    Regards,
    Amit

  • Query Selection screen field validatoin

    I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
    How can this be achieved ?
    I tried looking for exits but did not find a relevant one.
    Thanks in advance.

    Hello,
    You need to write a routine in SMOD for selection screen validations.
    It will come in i_step = 3. please refer foll code as example:
    The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
    DATA:  LI_VAR like rrrangeexit,
           wa_t_var_range like LI_VAR,
           count type i value 0.
    IF i_s_rkb1d-infocube EQ 'CUBE1' or
       i_s_rkb1d-infocube EQ 'CUBE2'.
    Check whether only one of date variable is entered in variable screen.
    IF I_STEP = 3.
        Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
          if wa_t_var_range-low > sy-datum.
            CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
              EXPORTING
                I_CLASS  = 'RSBBS'
                I_TYPE   = 'E'
                I_NUMBER = '000'
                I_MSGV1  = 'Enter date less than or equal to current date'.
            raise again.
          endif.
    ENDIF.
    ENDIF.
    Regards,
    Shashank

  • Query Selection Screen restriction

    Hello All,
    In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
    Can this be achieved? If yes how.
    Regds,
    Shashank

    Hi,
    You can try out, customer exit with I_STEP = 3.
    using which a exception will be raised if user enters value for more than one variable.
    Hope it helps......
    Regards,
    Umesh.

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • Selection-screen texts are not shown after transporting to QAS server...

    Hello Experts,
    We created a custom transaction for MB52(Display warehouse stocks) named ZMB52.
    After I transported it to QAS server, the texts in the selection screen are shown
    as for example, p_bukrs, etc. When I looked at its text elements, it is maintained
    in German Language. My question is, should I translate it to English? And How do I
    properly transport it.
    Hope you can help me out here guys.Thank you and take care!

    Hi
    Have you created your own Selection screen Text elements
    or you simply copied the Std ones
    If you have created on your own it should have asked for the request and should have been transported with the request
    since you copied them as it is it is not displaying in ENglish language
    Translate to english and see
    otherwise create them in DEV with a request and transport it.
    Reward points for useful Answers
    Regards
    Anji

  • SQ01 - need to change selection screen text of parameters

    I am using KNA1 table in my SQ01(Abap query) and am having Kunnr as the selection screen parameter .The default text of Kunnr coming from KNA1 is 'customer number 1'.I need to change this to show it as 'customer number'.
    I changed the text in infoset in long text and header value,but it still does not work out. Any suggestions ??.Pls let me know.

    Hi,
    When you define the selection screen fields in the info set..There will be text box for selection text..There you can give the text..
    I tried this..And it worked for me..
    Thanks,
    Naren

  • Sorting Currency conversion Variables in Query Selection screen

    Hi Experts,
    I have an issue in sorting variables.
    A Currency translation is used here which has two selection options here, one for "Currency" and one for "Currency conversion date". They just pop in somewhere in the selection screen with out order. I want to put them together either in the middle or at the bottom.
    They are not visible in the Variable sequence tab of query properties.
    I changed the text for each of them (Ex. "XCurrency"), so that it sorts alphabetically, but no difference.
    Had anybody come accross this issue before.
    regards
    G Rai

    Hi,
    This seems strange that the variable does not show in the query properties. One thing I can suggest it to try changing the technical name/desciption of the variable if that changes the order.
    Please update back the thread if that helps.

Maybe you are looking for