Infoset Query Selection Screen

Dear Experts,
In an infoset query. how to split the Selection Screen into different screen areas (Blocks).
Means, presently the Selection Screen is having 20 fields together under single block.
I want to group them into different blocks with respective Headings.
How to do it?
Regards
Jogeswara Rao

Hello Jogeswara,
Go back to the infoset using SQ02.  On the "Change Infoset" screen, go to the "Field groups" section.  You may have to click the "Field groups" pushbutton.  If you right-click on the field group, then you can create, change or delete a field group.  Add fields to a field group by dragging field from left-side of screen and dropping on the right-side of screen.
Kind Regards,
Rae Ellen

Similar Messages

  • F4 search-help in infoset query selection-screen fields

    Hi all,
    I created an infoset, and it's corresponding query, and now I need to associate F4 search-help in two of the selection-screen fields. Since they don't have any reference field associated (they are SAP standard table fields), there are no possible values available to select.
    How can I do this?
    I have already tried to use the "AT SELECTION-SCREEN OUTPUT" in the infoset, but I'm not able to do that. When I try to use the select-options generated by the query (SP$00013 and SP$00014) I have a syntax error with "Field not known".
    Can you help me? I never done this before, so I really don't have a guess.
    Thanks in advance.
    Beste regards,
    Sónia Gonçalves

    Hi all,
    I have found thread  that helped me a lot in this issue.
    I just have one more doubt: I created the selection criterion and I can already see it in the query selection-screen, but it's appearing in the top of the selection-screen, in a different area called "General data selections".
    Isn't it possible to include it in the "Report-specific selctions"?
    Thanks in advance.
    Best regards,
    Sónia Gonçalves

  • Infoset-query-selection-screen-default-values

    Hi All,
    I am having the requirement as I need to put default values in the selecion-screen of the report by using  Infoset query. Let me know the settings required for this.
    I am using SQ01, SQ02, SQ03 T.Codes.
    And I need display  one record only if any field contains mulitple records, for example in the HR-ABAP, field p0105-usrid contains multiple values depending on the subtype.So, I need to display USRID when URSTY = '900'. All these should display by Infoset query only.
    Pls help me in this scenario , its an urgent requirement.I am very much thankful for you for reading my proble, if you will provide some sort of solution, I feel very happy.
    Advance thanks for this .
    Regards,
    Prakash.

    Prakash,
    To default the values on your selection screen, you will need to do some ABAP I guess. (if you do not want to use variant). Open up the infioset in SQ02 and then goto code option for the PNP**** field and then you can code to initialize the selection screen variables. Test with an ABAPer.
    To display multiple records as multiple columns, you will have to create custom fields in infoset, and then go from there. Again see ABAPer.

  • Infoset Query -- Selection Screen Text

    Dear experts,
    I hv created an infoset query. every thing is working fine except the selection screen text.
    It is coming like
    "Date on which the record was"    instead of
    "Date on which the record was created".
    Is there any way we can manage the selection screen texts in infoset query.
    Regards,
    Jaspal Kumar

    Hello,
    In the Infoset, click table -> field, double click on field and you see the field technical & label information, change the Field label there.

  • Infoset Query Selection Screen Issue

    Dearf Experts,
    I am a SAP-PM functional area. (Do know very little about technical sideof SAP)
    I am working on SQ03/SQ02/SQ01 for the first time to create an Infoset query.
    The output screen is incontrol and showing all the fields as per my specifications.
    My problem is the Selection Screen. This is displaying to many things not desired by me.
    1. Two tabs (I do not expect any tabs)
    2. Many Screen areas, repeating the fields (1000,0100,0101,0102,0103) 
    The screen area of my specified fields in at the bottom.
    My expectations about the selection screen is - just like simple one as in the case of SQVI.
    Please help me in getting through this problem.
    Regards
    Jogeswara Rao

    Gungor Ozcelebi,
    Thank you very much for responding,
    Exactly as you said, I am using Notifications logical database.
    (I was suspecting this reason)
    Infact I found about 8 fields (Perhaps related to Date fields, checkboxes etc) are automatically selected from the LDB.
    My trials to delete them were invain. They reappear while saving.
    I would be very thankful, if you help me in this case.
    Regards...

  • Check box in SAP Query selection screen

    I want to keep 2 check box in SAP Query selection screen.
    could you please tell me any one.
    regards,
    kumar

    Hi Vijay,
    If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
    You can find the name of the generated program of the query when you execute the query.
    Reward points if useful.
    Regards,
    Atish

  • BEx query selection screen takes long time to popup

    Hi,
    I have a query which is taking long time to popup the selection screen. I have tried in RSRT the generate report option, the generating report takes 45 to 60 mins. After the report is generated the query selection screen comes up in couple of seconds. The first time I run the query everything its fine but then for the second time the problem comes back again.
    The selection screen takes +/- 40 mins to comes up in RSRT and in the portal it times out.
    I have run the statistics of the query and according to the statistics report the query takes a  lot of time for the following component :
    OLAP: Query Gen.     2681,312682
    I have removed the query from the cache monitor and after that regenerate the report. But these steps didnu2019t solve my problem.
    I made two test queries, in one query I have made the CKFu2019s and RKFu2019s directly at the infoprovider, and dragged and dropped in the KF structure. In the other query I made the CKFu2019s and RKFu2019s in the query KF structure itself. The query where I have the CKFu2019s and RKFu2019s at the infoprovider that query times out, the other query where I put the CKFu2019s and RKFu2019s in the query KF structure doesn't has this performance problem.
    What I donu2019t know is why the query is failing when I use RKFu2019s and CKFu2019s from the infoprovider, the other query donu2019t have this problem.
    Please advise how to proceed.
    Thanks in advance,
    Arash

    Hi,
    Please check the following notes which should be useful.
    1387593 - Performance optimization for query change/generation
    1416737 - Performance optimization for query change/generation(2)
    1396485 - Performance optimization for query check/save
    Then please execute the SE38 report ANALYZE_RSZ_TABLES (see notes
    1472915, 1506560) and repair/correct the different tables to optmize
    the query definition tables.
    Regards,
    Amit

  • Query Selection screen field validatoin

    I am testing a query using the RSRT2 transaction and have a query selection screen whose fields i want to create custom validations for. ( which should trigger when check or execute is pressed )
    How can this be achieved ?
    I tried looking for exits but did not find a relevant one.
    Thanks in advance.

    Hello,
    You need to write a routine in SMOD for selection screen validations.
    It will come in i_step = 3. please refer foll code as example:
    The code example is to check whether date is less than or equal to current date. If user enters future date it pop ups saying enter date less than or equal to current date.
    DATA:  LI_VAR like rrrangeexit,
           wa_t_var_range like LI_VAR,
           count type i value 0.
    IF i_s_rkb1d-infocube EQ 'CUBE1' or
       i_s_rkb1d-infocube EQ 'CUBE2'.
    Check whether only one of date variable is entered in variable screen.
    IF I_STEP = 3.
        Read table i_t_var_range into wa_t_var_range with key vnam = 'VARDATE'.
          if wa_t_var_range-low > sy-datum.
            CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
              EXPORTING
                I_CLASS  = 'RSBBS'
                I_TYPE   = 'E'
                I_NUMBER = '000'
                I_MSGV1  = 'Enter date less than or equal to current date'.
            raise again.
          endif.
    ENDIF.
    ENDIF.
    Regards,
    Shashank

  • Query Selection Screen restriction

    Hello All,
    In my query selection screen, i have date, month and week as selection parameters. Now my requirement is that user should select only one of them. If he selects more than one ie combination of two or all three, than query should not show any data.
    Can this be achieved? If yes how.
    Regds,
    Shashank

    Hi,
    You can try out, customer exit with I_STEP = 3.
    using which a exception will be raised if user enters value for more than one variable.
    Hope it helps......
    Regards,
    Umesh.

  • Query Selection Screen does not appear in Web Analyzer

    Hi Experts,
    Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
    As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
    Kindly let me know the possibility for selection screen not appearing.
    Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
    Regards
    Suresh Kumar

    Dear Suresh,
    You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
    In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
    Also I would like to explain you the behavior of Web Analyzer,
    Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
    when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
    affect the variable screen and would not redisplay the variable screen as you require.
    Regards,
    Arvind

  • Addition of checkbox and 2 fields in ABap query selection screen

    Hi
    I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

    Hi Tarun,
    I am still not clear with the problem..I guess you require plant in your selection screen which you have.
    i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
    have you selected all the fields in infoset and made a selection screen?
    When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
    Let me know...
    Regards,
    Nihkil.

  • SQ01 -  Include a check box on ABAP query Selection screen

    Hi Experts,
    For my Abap Query, on the selection screen i am planning to include a check box such that if i click on the check box then a field will be displayed in the resulting output . On the other hand if i do not check on i should not be able the field in the output.
    Please tell me how do i do this.
    Thanks
    Venkata Pradeep.

    In infoset, Extras code tab
    Code section: At selection-screen output
    Do something like below:
      IF radiobutton1 = 'X'.    
         LOOP AT SCREEN.      
              IF screen-group1 = 'XXXX'.         "XXX is the filed group name you want to hide., you have to                                                                  find out what is it.
                   screen-input = '1'.        
                   screen-invisible = '0'.        
                   MODIFY SCREEN.      
              ENDIF.    
         ENDLOOP.  
    ELSE.   
         LOOP AT SCREEN.     
              IF screen-group1 = 'XXX'.        
                   screen-input = '0'.       
                   screen-invisible = '1'.       
                   MODIFY SCREEN.     
              ENDIF.   
         ENDLOOP. 
    ENDIF.

  • Validate plants selected in Abap Query selection screen

    Hi Everyone,
    I have a requirement wherein i have to validate 'authority check' for the plants populated in the selection screen in an already created abap query.
    I tried adding code in the code section. But i dont know how to use the select-option parameter. It already exists(VBAP-WERKS) in the table which is used for join, so i cannot add it in the additional fields. Am i correct ?
    Also, i saw that the report program for this query uses this parameter sa SP$00008. I tried using it but it gives an error The IN operator with "SP$00008" is followed neither by an internal table nor by a value list.
    Please help.
    Also, please advice whether this requirement can be catered in this query alone? or should i go with writing a new report program for this? ( i personally feel that this would beat the purpose of using Abap Query. )
    Regards,
    Tarun

    Hi Tarun,
    I am still not clear with the problem..I guess you require plant in your selection screen which you have.
    i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
    have you selected all the fields in infoset and made a selection screen?
    When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
    Let me know...
    Regards,
    Nihkil.

  • ABAP Query Selection screen

    Hi,
    I have an existing ABAP Query, my req is to add new Radio buttions block after the current seelction paramertes.
    i created radiobuttons in SQ02 infoset query with radiobuttons but when i run the report, selections screen has radio buttons first and then  previous selection criteria fields displaying...
    my req is first previous selection fields then radio buttons.
    how to change the sequence of the fields in selection screen?
    and based on the radio buttons, i need to filter the output data...
    in which event i have to write the code?
    Thanks
    Giri

    Sudheer,
    it is ABAP Query report... from SQ02... i cant modify those in SE38...
    current selection parameters are from table fields selected in SQ01 Query.... and radio buttons are in SQ02 Infoset.
    Giri

  • ABAP Query Selection screen parameters

    I need to add an additional selection screen parameter  in existing ABAP Query. How to modify the selection screen fields in existing ABAP query ? Kindly help me.

    Hi,
    GO to info set transaction SQ02
    Give the infoset
    Press change
    Press the selections button..Shift F7
    In the right hand side you will get a table control to enter the selection screen parameters..
    Press create button on top of the table control to create new parameters
    Thanks,
    Naren

Maybe you are looking for

  • Ipod not showing up on itunes or computer

    My ipod is not showing up on my itunes or one my computer. When I plug it in, it comes us as "do not disconnect" on the ipod, but nothing happens on itunes, or on my computer. How do I get it to come up?

  • Problem with special characters loaded from XML

    I have an XML whose elements contain special characters (for example: ñ, Ñ, á, Á, etc..), When I load the XML and make a Trace () the loaded element, I see that it is loaded correctly, but then in the text field is not special characters. For example

  • DAQMx task does not cleanup properly after execution

    I have two VIs which are designed to write to various digital output lines (NI PCI digital output card and NI PCIe DAQ) which will control the DUT/s. The channels are hard coded and I have one VI to write to DUT#1 and another to write to DUT#2. Each

  • Need to hide the options menu in page title bar in sap portal 7.31

    Hi Experts, I am using a classic frame work page. In that I have the page title bar iview. Now I need to hide the Persoalize and Open in new window option from the page title bar. Can you please suggest how to do the same. I have already removed the

  • Table for authorization objects

    Hi All, What is the table where all authorizations for a user for a particular authorization object is maintained? Thanks, Neelima.