Infoset query to query
Hi ,
If i run a existing query it is showing any display.
If i run it through infoset query it is giving output ,if i want to get output through query execution how to do it. give me some useful suggestions.
Thank u.
Regds,
devika
Hi Gaurav ,
Thank you . I recreated the variant and the problem is solved.
Regds,
devika.
Similar Messages
-
Crystal Report Missing SAP InfoSet, SAP BW Query Connector
Hi,
I have installed SAP GUI for Windows 7.2 (Compilation 2) and Crystal Report 2008 SP2 then following by installed SAP Integration Kits 3.1 SP3 on my workstation. However, when i launch my Crystal Report designer, it do shows SAP toolbar however when i click on one of the icon (eg: Setting) the entire CR will hung and prompt me error and exit automatically.
Beside that, i could not find any connector for SAP (Eg: SAP InfoSet, SAP BW Query and etc) when i create a new blank report by click on the New Connection.
Appreciated anyone know this could assist on this.
Thank You.
Regards,
CKHi Ingo,
Thanks for your prompt reply. I will sort it out and ensure the release version will be the same as Inter Kits.
By the way, i saw your post regarding the Integration Kits installation and configuration. However, i still need some clarification; appreciated you could assist me on this.
I have installed SAP BOXI3.1 SP3 on an LINUX machine (Redhat Enterprise 5) and the server was running fine without connecting to BW or SAP eCIBS.
Now, i have to establish the connectivity to BW (InfoCuve and BW Query) and SAP eCIBS system. As my customer requirement was required to using WEBI, CR and Xcelsius for connecting to BW for getting the data and then using scheduler in BOE for performing report distribution. Some of the report will connecting to SAP eCIBS directly and that will using our Client's machine for creating the report (using CR2008) and then publish to the BOE platform for report scheduling and distribution.
My question, i wish to install SAP Inter Kits and downloaded Inter. Kits for SAP Solution 3.1 SP3 from service market place. When i refer to the document from help.sap.com; there are couple of section but i wish to know which are the perquisite section that i wish to install and configure?
Eg: System Requirement which are installing SAP RFC SDK and SAP JCO SDK into my BOE server, then following my create a logon token. How to to that? It also require to install SAP Java Connector and SAP GUI, does these two available for LINUX OS as well?
The steps in doc was confuse, appreciated your kind help.
THanks.
Regards,
CK. -
How to add an Infotype to an exsting Infoset (ad hoc query)
Hi,
How to add an Infotype (Ex. 0025) to an exsting Infoset (ad hoc query)?
I was trying by clicking on 'Extras' tab & create...I get three options, create field, create table or create structure.
I am not sure which to use or is there any other way? Pls. let me know the steps...
Also what is this 'Package', which is aked whenever you create or change an Infoset.
Pls. suggest.
Tnx
SKRI was able to add the infotype by adding the table as PA0025 & include all the fields in the field group.
When I check, I get the following error:
"Access to PA0025 with sequence no. 01"
Message Text
Access to PA0025 with sequence number 01
Technical data
Message type__________ W (Warning)
Message class_________ AQ (Message texts for SAP Query)
Message number________ 006
Message variable 1____ Access to PA0025 with sequence number 01
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______ 4 (Level of detail 4)
Problem class_________ 3 (medium)
Sort criterion________
Number________________ 1
Do we need to input the sequence no. as 00? or is their anything else that I have to maintain?
Tnx
SKR -
Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY
Hi All,
We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
Kindly suggest a solution.
Full points will be rewarded.
Thanks in Advance
KumarHi Salman,
Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
Please let me know if you have any suggestion in this direction?
Regards,
Hems. -
Hi masters
wt's the difference between infoset query& sap query/
& pls discribe both....Hi,
Both are same.
U can Access infoset by RSISET and SAP by RSQ01 -
How to create Infoset&user group query--(query report)
Hi Guys,
how to create Infoset&user group query--(query report),
Pls send me the exact procedure with Example....
Regards:
Kumar .Ggoto SQ03 and create an User Group If U want to create Ur Own.
Goto SQ02 to create Ur Infoset by Giving Logical database name or Simple Database table
Then Choose What ever data U need to be included in The Qurey in field Groups.
Then Generate the Infoset
Now Assign the infoset to user group
Now goto SQ01 and Click on Other user group Button and choose Ur user Group.
Then in the USer group select Ur Infoset and then create Ur own Query and save this.
Now select the infoset query and goto More functions under Query menu and Generate report name.
Now Create a transaction code for the report name generated.
Now use the Tcode.
Hope U have got the basic idea of creating Queries.
~BiSu -
Hi,
Is it possible to change the InfoSet of a Query? How?
Here is my problem: I have copied a standard InfoSet in order to make some changes. Furthermore, I have copied a query that uses the above mentioned standard InfoSet, but I cannot assign my copied InfoSet.
Any help is greatly appreciated.
Best regards,
ElvezHi Elvez,
You can ignore the previous reply.. it was probably a mix-up with another post..
Anyway, after copying the standard infoset, you can try by creating a new query for the custom infoset, instead of copying the query also.
Regards,
Suresh Datti
P.S. just noticed the previous post was corrected...
Message was edited by: Suresh Datti -
Tarnsport infoset and SAP Query
Hi All,
I have created infoset and SAP quesry and user group.
When i created user group it asked me the transport request.IT has been tarnsported to dev to QA.
But infoset and query are not moved to QA.
It is not asking me for create transport reuest.
Please let me know how to tarnsport infoset(SQ02) and Query(SQ01).
ThanksHi all,
Thanks for u r reply.
My query is in global area not in standard area.
Any way i solved the problem but how to transport the variant.
When i read the documentation it is saying that we have create the system variant then only we can transport.
IS it so pleas let me know.
Thanks, -
Query: Is it possible to change Infoset of a Query
Hello!
I have a question, I would like to know if the following it is possible:
I have Query A and Infoset B and C. At the moment Infoset B is assigned to Query A, would it be possible to assign Infoset C to Query A?
I was looking for this possibility, but could not find it anywhere, so if you have an idea, just tell me, thanks a lot!
DominikNot Possible
-
Hello.
I would like to ask about using sap query to extract data from table in infoset. Is it possible to write an abap code and get data from certain table? I ask because I do not have any experience in that. Tried to find any examles, but nothing find.
My question is simple- how to extract data using simple abap program, then creatу an infoset with this query and then how to create attribute list based on infoset?
Thanks a lot.Hi Aryat,
Yes it is possible to include code in infoset and fetch data from database tables.
Go to tcode- SQ02, and change query area from global->standard and click change.
Now click on Extras,it will enable all the custom fields on right hand side.
Now select the field from the row and click coding for addition symbol as mentioned in below screen shot, it will take you to the program line screen and you can code here.
After completing coding save and generate the infoset and adjust the query again otherwise new changes will not reflect.
Hope it will solve your issue. -
Error while accessing Query using Query Analyzer
dear experts...
while accesiing the query using query analayzer...
we are getting below error...
What has happened?
URL http://xxx.xxx.xxx.xx:XXXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex call was terminated because the corresponding service is not available.
Note
The termination occurred in system BI1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:001-u:ANAND-l:E-i:PSRCCPRDA003_BI1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
thanks for helping me...
anandHi friends,,
instead of getting the link like
http://128.222.125.57:9000/sap/bw/bex?cmd=ldoc&infocube=ZMC_SRH1&query=AGINGV21A&sap-language=EN(working link)
am getting below link...which is getting an error....
http://128.222.125.57:9000/sap/bw/://:/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=AGINGV21A
above marked is the unwanted thing so how can i change my link in query designer???
please suggest me firneds -
Unable to create new query using query manager
Hi friends,
I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
Chapter - creating new queries.
Below are the steps I am going through to create new query:
Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
Please follow this link to see how the page is displayed in first step:
http://uploadpic.org/v.php?img=EvMvVAXX1E
Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
http://uploadpic.org/v.php?img=GzHh3f6krU
Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
http://uploadpic.org/v.php?img=Wbbla3Q3jE
I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
Below is the query that I want to create using query manager:
SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
WHERE P.EMPLID = N.EMPLID AND
N.EMPLID = A.EMPLID AND
P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');Hi,
As I cannot access your screenshot by the blocking of company firewall rules.
I'm guessing currently you are using PT 8.52.00 version, correct?
This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
Hope this helps.
Thanks,
Saxon SI -
Using NVL in Query of Query resulting in error
I'm still using CF8 and Oracle 11G back-end.
When I use NVL in the query of query I got error....Can't I use NVL to check on null value? Please help
Here is my codes:
<cfquery name="GetC2" datasource="#Trim(application.OracDSN)#">
SELECT CamID2, rel2_2,p_ln2,p_fn2,ins,l_year
FROM prt_temp
WHERE Ins = 'CC'
AND l_year = '1481'
AND NVL(Child_LN2,' ') <> ' '
AND NVL(Child_FN2,' ') <> ' '
</cfquery>
<cfif GetC2.Recordcount NEQ 0>
<cfquery name="CheckRel2C2" dbtype="QUERY">
SELECT CamID2, rel2_2
FROM GetC2
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
AND Ins = 'CC'
AND l_year = '1481'
</cfquery>
</cfif>
The error:
Error Executing Database Query.
Query Of Queries syntax error.
Encountered "NVL ( Rel2_2 ,. Incorrect conditional expression, Expected one of [like|null|between|in|comparison] condition,NVL is an Oracle function, and is not available in ColdFusion Query of Query. If you are trying to check for null values, then use IS NULL or IS NOT NULL. So
WHERE NVL(Rel2_2,' ') <> ' '
AND NVL(p_ln2,' ') = ' '
AND NVL(p_fn2,' ') = ' '
becomes
WHERE Rel2_2 IS NOT NULL
AND p_ln2 IS NULL
AND p_fn2 IS NULL
-Carl V. -
I'm creating an image gallery. My database has about 1000
records with 10 column.
Now I'm realising there's a lot of trips to the database.
Would it be better that when I init my app I store the "get all"
query and query that from that point? Or is the difference in
performance of querying a query as a oppose to a database not worth
it?
If you say I should query the query, how many records would
be too much to hold in memory.
Thanksquote:
Originally posted by:
dandev
I'm creating an image gallery. My database has about 1000
records with 10 column.
Now I'm realising there's a lot of trips to the database.
Would it be better that when I init my app I store the "get all"
query and query that from that point? Or is the difference in
performance of querying a query as a oppose to a database not worth
it?
If you say I should query the query, how many records would
be too much to hold in memory.
Thanks
It would be better to just select the records you need. -
How to extract the Physical Query(database Query)
Hi ,
How to extract the Physical Query(database Query) from obiee which was fired in obiee
Regards
RangaHi Ranganath,
Have a look the following links.
Setting Logging level:
http://gerardnico.com/wiki/dat/obiee/loglevel
How to see physical query:
http://gerardnico.com/wiki/dat/obiee/manage_session_log
If you are new to OBIEE, spend some hours on the following blog to learn from basics to advanced level.
http://gerardnico.com/wiki/
http://obiee101.blogspot.com/
http://www.rittmanmead.com/blog/
Hope it helps you.
Regards,
Kalyan Chukkapalli
http://123obi.com -
Hey All
How I can run query from Query Manager from addon level?
regards
Krzysztof SalaHi Krzysztof,
There is no object in the SDK to access and execute the queries programmatically so you have to use the UI to simulate the user opening and selecting the query (ie activate the menu object for the query you want to run, populate any parameters then click on the OK button to execute the query). It's a bit of a messy solution but it can work ok.
The alternative is to execute your query from within your add-on and display the results in a new form. This form can just have a matrix and an OK button so it's very easy to create (via Screenpainter or at runtime).
Hope this helps,
Owen
Maybe you are looking for
-
Quesion about the Basic concept of RMAN incremental backup
I have a problem in understanding the basic concept of two types RMAN Incremental backup ie. Differential and Cumulative. I just don't understand how cumulative incremental backup consumes more space than Differential backup. Have a look at the scena
-
Hi All, I have a requirement where in i need to create a BAPI as a separate interface and then call this BAPI in a BPM created in another interface. This BAPI interface is to be created in a genaralized format for reusability. Is it possible to achie
-
Can't Install iTunes. "Missing Quicktime.msi"
Hi guys. When I try to intall iTunes its says something like this "Can't read the file: C:\WINDOWS\Installer\QuickTime.msi" Whats wrong?
-
Continuous restarting of the finder
I updated my tiger installation to leopard and havent looked back, but yesterday presented itself with a problem. I was dumb enough to fool arund with the menubar, when under the flag "icon" I choose grammarian which is program I have never really us
-
List/Menu Form hides Main nav dropdown
I've created an html page that when you scroll over the main nav bar at the top, the drop down, or 2nd level headers, drop down 'behind' a list/menu form? Any ideas on how to fix this?