Infosets are not display in production system

hi,
I am new for this topic ..
I got the production system acesses through client..as per client they send some document regarding infoset which are already created in sapbw database ..but in sq02 and sq01 there is no display of created infoset ...
don't give any urls for this topic plzz explain in few words..
plzzzzz ..urgent
regards,
goodyear..

Procedure
In the InfoSet: Initial Screen, choose InfoSet -> Additional Functions -> Adjust.
This takes you to the Log Display dialog box. The system shows you errors and warnings in the same way as when it is checking or generating an InfoSet. There is an additional Adjust pushbutton on the pushbutton toolbar.
Choose Adjust.
The information from the data dictionary is copied over into the InfoSet.
Choose Generate.
It's recommended that once you have adjusted the InfoSet, you also adjust all the queries belonging to this InfoSet. This ensures that the technical properties that have been changed are also copied over to the query definitions.
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/cb4044455611d189710000e8322d00/content.htm
Hope it helps!
Bye,
Roberto

Similar Messages

Role not displayed in Production system

Dear all,
I have CUA set up (CUA is configured in solution manager), and I assigned 10 roles to a user in solution manager using SU01 and selected Production system while assigning roles and the roles were already existing in production system.but after role assignment to the user, I verified in Production system and I found that they are not reflecting in PROD. Infact, I have done user comparision but still no change.
Please let me know do I need execute SCUL by selecting the User ID.
If yes please let me know the steps to execute SCUL.
Your help is much appreciated!
Many thanks
Anil.

Hi,
Please go to the Transaction SCUL, and give the user id and the system as the prodution system ID (eg. PRD100). By default the Error, Warnings and Unconfirmed Distribution will be already checked. Do not change them and then click on Execute.
If you receive the message saying No Data, then it means that the IDOCs for that user were successfully pushed from CUA to the production system.
But, since the change was not reflected, when you execute, you will be able to see the status where the IDOC is struck. Expand the tree and see the nature of the error, and try to resolve that error. And then select the entire tree and click on the Distribute button.
It will give you a pop up, let all the checkboxes as it is, and continue. After the distribution is triggered, you will get a message in SCUL.
Refresh the SCUL data, and you should be able to see the current status of the distribution.
If all the data is cleared in SCUL, you can log into your produciton system adn check the users roles. New role should be visible there.
I hope this will clear your doubt. Let me know if you have any questions on this.
Regards,
Sneha Vyas.

Line Breaks are not appearing in Production system

Hi,
In my company users have one problem, which I am not getting the same either Dev or Quality. I tried to replicate it but I am getting fine without any issues. Issue is users create sales order in Interaction Center by using the credit cards. We wrote the code to pop up with the information about the amount being deducted against each card( users can use multiple cards) once the order is saved.
Below is the code in one method of the class. lv_text contains the information like 'Visa 3002 for amount 1209.00 is authorized(#1567)'
CONCATENATE lv_text ' ' INTO lv_text SEPARATED BY cl_abap_char_utilities=>newline.
Problem is in Production we are not getting line breaks whereas I am getting fine in Dev and Quality with the above code. In production, users are getting below. There is full stop between the amount(#1567$) and .
Visa 3002 for amount 1209.00 is authorized(#1567). Visa 5443 for amount
1300 is authorized(#7654). 
But in Dev and Quality the same above message we get like below, which is correct.
Visa 3002 for amount 1209.00 is authorized(#1567).
Visa 5443 for amount 1300 is authorized(#7654).
I changed personal layout values in the Personalization and tried but no use.
Can anyone help me in this regard?
Thanks,
Baasanthi.

Hi Andrei,
I am closing this issue as it is being taken care by team lead.
Thanks,
Baasanthi.

Purchase Order Notes not displaying in some systems

Hi All,
Purchase Order Notes are not displayed in some systems. But the same notes are viewable from a different PC.
This is the case of few of my end users.
Please help.
Thanks
Vijay

Hi All,
The issue is resolved. It was because of updating the IE version from 6 to 7.
We have degraded the IE version back to 6 and it all worked fine.
Thanks
Vijay

Infoobject in infoset but not displaying in query designer

Hi,
I have created a query on infoset(ods1 & ods2).
a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
pls give your inputs,for why this infoobject is not available in query designer.
Thanks
Radika

Hi Radika,
I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
Do this and see if it helps.
Thanks & regards,
Nikhil

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Permissions are not displaying correctly on Yosemite server

My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

FAGLL03 Special Field Values Do Not Display in Production

We are using the new GL in ECC 6. I have a strange problem where special fields that were added to the line item transactions display in dev and quality but not in production. Please read the steps that I have taken.
1. Using note 984305 we defined special field BSEG-MATNR using this path:
Financial Accounting (New)
General Ledger Accounting (New)
    Master Data
      G/L Accounts
        Line Items
          Define Special Fields for Line Item Display
This field (U_MATNR) displays correctly in FAGLL03.
2. I used note 1034354 to create an implementation of BAdI 'FAGL_ITEMS_CH_DATA. Then I
followed the documentation of the BAdI to create structure CI_FAGLPOSX within FAGLPOSX and added these fields:
Material Type: field MARA-MTART
Material Group: MARA-MATKL
I added code to method CHANGE_ITEMS to read for those fields. Here's part of the code:
* MARA - Get Material Type and Material Group
    SELECT SINGLE mtart matkl
      FROM mara
      INTO (wa_items-zzmtart, wa_items-zzmatkl)
      WHERE matnr = wa_items-u_matnr.
The values of these fields display correctly in development and quality, but they do not display in production.
3. When I debugged FAGLL03 in development I found that the value of U_MATNR was filled when I stopped at method CHANGE_ITEMS. However, when I debugged in production, U_MATNR was not filled. It had to be filled at a later time because the value appears on the report. In my code, I am using U_MATNR to find the values of material type and material group. Because U_MATNR doesn't have a value at that point in time in production, my code doesn't find material type or material group.
4. I contacted SAP and was instructed to use note 984305. I executed the function module
ITEM_STRUC_EXTENSION which did not help.
5 I also used note 205096 to execute report BALVBUFDEL, but this did not help either.
6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
7. I tried to compare configuration between development and production, but everything looked OK to me.
Has anyone had this problem? Any tips?
Brenda

Hi Brenda,
>
Brenda Bankert wrote:
> 6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
I have no idea except that you can make sure Include CI_FAGLPOSX is active as well as the including FAGLPOSX. And please check the transport protocol(s) if CI_FAGLPOSX is included. If you have any kind of error/warning in the import protocol, that may give you a hint.
If nothing helps, create a new sap support case and tell them you are using SAP solutions without modifying anything.
Regards,
Clemens

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

Groups are not displaying in the user's member of tab

Hi ,
We have a issue,
After mapping any AD group in CMC,the groups and users are displaying in the cmc list. but when we go to the properties of the user and member of option ,the groups are not displaying .
After restarting the CMS every thing works fine.
Every time after adding a new user we should restart the CMS, it is very difficult for us as number of users are working on this .
We are using number of AD groups.
Is there any resolution for this with out restarting the CMS.
Thank you in advance.
Environment -
BO XI3.1,
LDAP authentication.
Thanks & Regards,
Collin.

The LDAP graph is responsible for showing the membership when viewing the user properties, an issue like this would indicate the graph is not auto updating. It normally builds when starting the CMS then every 15 minutes or so for new users (depending on system activity). It shouldn't lose any info (if it does this indicates a caching or communication problem with AD). There is a graphtimeout setting in the registry (search SAP notes) if this were disabled then it may cause similar symptoms.
I'm not aware of any bugs in 3.1 causing this behavior so you may need to open a case with support (authentication team) to help troubleshoot.
Regards,
Tim

64-Bit DSNs are not displaying in SSIS connection manager

Hi Team,
I came across an issue while working with 64-Bit SQL Server 2012 version. We installed 64-Bit SQL Server 2012 version on a 64-Bit Windows Server 2012 machine. I created two 'System DSNs' under 64-Bit ODBC driver those are for 'IBM iSeries access ODBC driver'
and 'SQL Server Native client 11.0'.
I was using ADO.Net source to use these DSNs in an SSIS package in BIDS. But these System DSNs are not displaying from the data source drop down list in the connection manager.
Can somebody help me out how i can use 64-Bit System DSN while executing the packages?
Thanks,
Venu.

Visual Studio is a 32 bit software so you wouldnt be able to see and use 64 bit DSN, if you want to see them you would have to install the corresponding 32 bit drivers, else complete your development on a diff box and then bring your packages to the 64 bit
machine,
That said the SSIS runitme can still utlize both the 64 bit an 32 bit run time by the means of how its executued i.e. dtexec from the progamm files or programmfiles(x86) folder
Abhinav http://bishtabhinav.wordpress.com/

Reader icons for PDF saved on Desktop are not displayed

Hello,
I have Windows 7 Ultimate 64 bit installed on my computer. Whereas Adobe Reader typical icons are correctly displayed in every PDF documents saved on my hard disk, they are not displayed on those saved on Desktop. A blank icon is displayed instead. I have tried to repair Adobe Reader from Control Panel and to uninstall it and remove its leftovers on the registry by using an uninstaller program but the problem still persists. If I create a New Folder on the Desktop and cut and paste the PDF documents saved on Desktop on such folder, they are displayed but if I then move them back to the Desktop the blank icons are again displayed. Any idea what can be the cause and how to fix the problem?
Many thanks,
Ennio

Hello,
There are so many posts in this forum concerning this question. Just make a search with the "ICON" keyword, then you will get hundreds of answers.
You can also look at the OTN forms page
http://www.oracle.com/technology/products/forms/techlisting9i.html
and particulary documentation about icons
http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
Francois

New created values are not displaying after upload

Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AM

Hi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards

Screen changes are not active in production tenent

Hi Experts,
I realized the transport of a solution to the production environment and as can be seen in the attached image the solution has been successfully activated.
The scripts "OnSave", "AfterModify", etc for example are up and running in the production environment, but all the changes that were made on screen are not displayed to users.
Does anyone know how to make the screen changes available to users?
Best regards.

Hello Felipe,
What tool did you use to "make changes on screens"?
UI Designer started from SDK?
Adaption mode in UI?
Bye,
Horst

Calender's Left Arrow & Right Arrow are not displaying.

Hi All,
My issue is in the calender of WebUI, to see the last month we click Left Arrow and for next mont we click on the Right Arrow ,these arrows are not displaying but that shows the Cross mark in the place of the arrows.When we click on the Cross Mark that the functionality is working.( I had already checked with the default skin in the personalize settings of WebUI),still the issue is there.
In the development system it's fine but we are getting the problem is in the Quality system.
Regards,
Venkatabharath Voona
Edited by: venkatabharathv on Jun 15, 2011 2:48 PM

answered

Infosets are not display in production system

Similar Messages

Maybe you are looking for