Infosource--"0sd_c04"

hai friends,
I am new bw, plz clarify my doubt.
In the cube 0SD_C04 there key figures loading date (0loaddatek) and actual goods issue (0act_gi_dtk). But I don't find these kefigures in any infosources (2lis_12_*)
then how these fields get updated in the infocube "0sd_c04".
thanku.

Hi kartikeyan.
As far as I remember 0SD_C04 is also filled by 2LIS_11* (sales orders) and 2LIS_13* (billing), so these fields might be updated from here.
Otherwise you might need some customization of the data sources. Please check this in the logistics cockpit (LBWE).
Hope it helps.
BR
Stefan

Similar Messages

Can not see ODS infosource in the system

Hello,
I am unable to see Infosource of my ODS under the infosources tree. This is only happening in DEV and PROD. In QA system i could see it and also create additional infopackages.
The bottom line is I want to be able to create extra Infopackages under it other than what system creates.
Is there any setting i have to do or any ideas?
Thanks in advance,
vamsi.

Do you mean export data source one's 8*...
go to rsa12... settings-- display generated objects -- click on radio buton show ods generated objects and hit the arrow key..

How to load data to a cube from multiple infosources ?

Hi friends,
How to load data to a cube from multiple infosources ? could u please answer this question .
thanks in advance......

Hi ,
say for example you need to load data to 1 cube from 3 info sources:
1) You need to create 3 update rules for the Cube.
2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
Regards
satish
Message was edited by:
satish murthy

Start routine error - infosource 2LIS_13_VDITM

Hello,
During the activation of the standard InfoCube 0SD_C03 (Sales: Overview), I have encountered a problem in a transformation between the infosource 2LIS_13_VDITM and the afrementioned Cube (this transformation has been transferred during the activation of Business Content).
The transformation is inactive after the installation (other dataflow structures, for other datasources attached to this Cube have been automatically activated). When I try to active it, an error message appers, informing that:
a) Initial update has been set for some of the key rules (e.g. for target field 0VERSION) - but that is a minor obstacle; the bigger problem is that
b) there is a syntax error in the start routine for this transformation
Checking that start routine results with the following error:
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
Since I'm not an ABAPer, that info is a bit vague to me.
I have tried to find an answer in the forums but with no success. So if anyone could provide a solution this problem or point me to a thread where it has been answered, I would be very grateful.
I can provide more details should those be needed.
Best Regards,
Alek

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Automatic mapping of fields in transformation between DSO and Infosource.

Hello BI Experts,
When i migrate the update rule between DSO and infosource in to transformation, the log of successful copy of routines and hence the creation of transformation appears. But when i open the transformation for activating it, there is no mapping between the fields as well no routines appear.
Please suggest me the way out of it.
Points will be assigned.
Regards,
Vinayak

VGM,
By the way how are you migrating the routines into BI 7 from 3.x??? And moreover the update routine has to be a local routine in BI 7 or else a start routine or else end routine??? You need to decide where it will be applicable and then copy the old code and modify it and paste the same. If you are creating any start or end routines to populate data for some object, do remember that the objects should map with any one of the object from Infosource.
Hope this helps
Regards
Gattu

Data Source & Infosource

Hi,
I am working on the PM cube 0PM_C01 .I have to enhance this data source to get some additional data .
The requirement is to create a custom stagin DSO for this cube 0PM_C01 & then perform the reporting from a cube .
Should I copy the Std InfoSource ZPM_0M_0PA_2 to custom Infosurce say XPM_OM_0PA_2 & then add a new info object to hold the enhanced data , after which I will map this infosurce to the staging DSO .
using this approach I will make sure all the update rules & transfer rules are captured .
Or
Can I just map(tranformation ) the enhanced data source 0PM_0M_OPA_2 to the staging DSO using BI 7
If this approach is used how can i make sure the std update rules & transfer rules are applied .
I need to make sure all the current data in the data source is pulled into the DSO.
Please let me know

Hi there,
I would use BI 7 transformation rather than transfer and update rules...
When moving transfer and update rules to transformation:
1) rightclick on transfer / update rules -> Additional functions -> create transformation
2) make sure that you have all the routines in old rules converted to classes in transformation. This has to be done manually going through the code.
3) Enhance the datasource and apply necessary rules in the transformation for the enhanced objects
4) Load to DSO
Edited by: Phani Kothwali on Mar 4, 2010 6:26 AM

Problem with infosource for 0customer

Hello Experts
I am workign in 3.5 Bw system. We have a 0customer master data object and values are being populated from ECC system.
I am not able to look at infosource and whenever i try to expand 0customer in RSA 1 it gives me ABAP dump which i dont understand.
Moreover i have check 0customer using RSRV and there is no problem with infoobjet.
Regards
Sudeep

Hi
Error analysis says
"Short text of error message:
Internal error in Data Warehousing
Long text of error message:
Diagnosis
     An internal error occurred. Th
     state.
System Response
     The system terminates data pro
     last correct system state.
Procedure
     Search for SAP Notes describin
Procedure for System Administratio
Technical information about the mes
Message class....... "RSAWBN"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " ""

Diff b/w infosource and data source

hai all
can any one tell me abt the difference b/w infosource and datasource in b.w?.and also abt the infopackage and how the later relates with the former?.
thanxs
sri

Hi Srinivas,
Data source: It provides the data of source system,created in source systenm side and then replicated in BW side.Itis one which provides the data available in the tables to the BW System.A group of fields which are coming from one or more tables is called as datasource.Data will not be resided in the datasource.It will be present in the Tables.Using Datasource we extract the data into BW.
_TYPES OF DATASOURCE: _
datasource for transction data
datasource for char attributes
datasource for texts
datasource for hierarcy (att,texts, hier are master data datasources)
InfoSource: It is the source of meaningfull data for data target...created in BW side..it is basically logical pool of data ( no physical storage) from one or different data source... It is on the BW which contains all the InfoObjects. It contains transfer structure and communication structure. Transfer structure is actually the structure similar to the R/3 Datasource structure and comm. structure contains all the InfoObjects.
in 3.5 it has two types of infosource... flexible update(transction data) and direct update (master data)
core parts: communiation structure and transfer structure...
and infosourc in 7 you logicallcy group striaght infoobjects......
*PLS Search SDN for all ur Basic BW Queries*
*pls assign points,if info is useful*
Regards
CSM reddy

Unable to find the content of data source into infosource

Hi
I have successfully created a source system in BW and have activated the business contents but I am unable to find the data source contents in infosource. I have replicated the metadata also but uanble to get? are there any steps to transfer the data from datasource to infosource.?

after the replication, you'll only see the datasources under the node datasources. you need to map a datasource with an infosource (3.5). in bi7 this is not necessary anymore...
but for these kind of basic questions, you should really search the forum before posting a thread.
M.

Can there be more than one datasource to an Infosource

Hi,
I am learning the SAP BW and this question could be very basic.
I know that there can be only one infosource assigned to a datasource for each source system, but can an infosource have more than one datasource from different source systems?

Yes, you can have multiple datasource assignments that belong to the same source system or different systems.
DATASOURCE can only have 1 INFOSOURCE
INFOSOURCE can have many DATASOURCES
Good luck!

Can I use one infosource to update data to CUBE and ODS???

Hi all,
Can anyone tell me if I can load data to OSD and Cube from one the same InfoSource? As I know, I have to have "0recordmode"(update mode) in communication structure for ODS not for Cube. So how can ODS and Cube use the same Infosucre to update data?
Thank you

John,
Depending on the volume of data and the type of infosource, sometime one update to ODS first and then subsequently update to the Cube or update both cube and ODS in parallel.
For example, if you use AR or AP line item datasources, since you are extracting from both open line and closed line items tables, there could be multiple records for the same thing coming through. First when it appears as an open line item, and when it is paid, it appears again as a paid line item so if you update directly to the cube, you can have multiples of the real value. Thus in this instance you update from infosource to ODS then subsequently use delta update from ODS to cube. CCA and C0-PA on delta mode are example where there are no overlapping, thus you can update both ODS and Cube at the same time.
Hope this helps,
Mary

Two ODSs share the same InfoSource but with different updata mode load?

We've got two different ODSs (ODS1 and ODS2) for two respective clients (client 1 and client 2). Client 1 has already going alive and in the InfoPackage, we only pick up ODS1 (Client 1) as feeding target and we have conducted initial load and several times of Delta loads for ODS1 (data load daily). But now we are going to start to load data to ODS2 (Client 2) and at the same time we will have to continue our delta load to ODS1.
It could not be possible that the two ODSs will be feeded data with different pace (ODS1: continue delta load, ODS2: initial load) if they share the same InfoSource. Then what's the best way to resolve this issue?
Thanks

hi Pradip,
Tell you a bad news that the solution doesn't work on two of the EBP (a source system which is similar to R3, we've got 4 EBP ODS/InfoSources, but two of the four don't work with the last step listed below) ODSs/InfoSources. The steps I took on production are:
1. Conduct Full Repair data load to ODS2;
2. Delete init option of ODS1 from Scheduler menu;
3. Run Init without data transfer to set delta pointer for both ODS1 and ODS2.
But the last step to run Init without data transfer has taken 1 whole day and eventually becomes red since it takes so long time to set delta pointer.
When I said our solution worked is that I conducted the test on our GL ODS and the Init without data transfer took about 1 hour to finish.
Also when we conduct the last step to do the Init without data transfer to click Start button to set pointer, a msg box titled "Activate ODS Data" pops up saying that "No requests have been selected for activation. Do you want to make a selection, or activate all the requests?" with buttons "Activate all requests", "Select requests" and "Cancel". If clicking the button "Select requests", another msg box pops up to prompt to input a Date range, we didn't input any date range, just click continue, then the Init without data transfer will run forever!
Thank
Message was edited by: Kevin Smith

When infosource is Mandatory in BI 7.0 ?

Hi Experts,
In Bi 7.0 infosource is optional, at what instances infosource is Mandatory in BI 7.0 ?
I will ASSIGN POINTS FOR YOUR VALUABLE ANSWERS.........

Recommendations for Using InfoSources
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/frameset.htm
InfoSource
http://help.sap.com/saphelp_nw04s/helpdata/en/7e/001342743eda2ce10000000a1550b0/frameset.htm
There are multiple scenarios discussed below.like
1. Data Flow Without an InfoSource:
2. Data Flow with One InfoSource
3. Data Flow with Two InfoSources
3.x InfoSource
http://help.sap.com/saphelp_nw04s/helpdata/en/90/64553c845ba02de10000000a114084/content.htm
Thanks...
Shambhu

How to join two DataSource in a single InfoSource

Hello,
I have got two datasources which both share the same primary key (Field IDCO) and also have several individual fields. For example:
Datasource 1:
| IDCO | price |
Datasource 2:
| IDCO | amount |
Now I would like to join both datasources into a single InfoSource that should look like:
| IDCO | amount | price |
In plain SQL I would do something like
Select ... from datasource1 inner join datasource2 on datasource1.IDCO = datasource2.IDCO
Any ideas how this can be achieved be achieved in the Data Warehousing Workbench?
Best Regards
Christoph

Hi Christoph Außem, welcome to SDN world....
Steps:
1. Create a InfoSource with |IDCO | price | amount - InfoObjects. then map Datasource 1 with InfoSource here Mapping is like below..
DataSource1-IDCO = InfoSource-IDCO
DataSource1-Price = InfoSource- price
EMPTY (NULL ) = InfoSource- Amount
DataSource2-IDCO = InfoSource-IDCO
DataSource2-Amount = InfoSource-Amount
EMPTY (NULL ) = InfoSource- Price.
In this wasy you can map the fields and InfoObjects.
Thanks
Reddy

Error while trying to Change an Infosource

I get the following error while trying to change an Infosource. I am not able to get to the change screen and it displays the following message 'Infoobject MPVPOPR not available in the Active Version'.
I did the following to try and debug the issue...but with no luck..
1) I checked for the Infoobject MPVPOPR and did not find it anywhere (Metadata, Transport Connection, Infobjects)
2) I am able to load the data using an infopackage into the ODS.
3) Communication structure and all is Active...
I just cannot get to the Change Screen for this Infosource and it displays the error 'Inobject MPVPOPR not available in the Active Version'.
Please provide any Suggestions
Thanks and Regards
Andy

Andy,
For the confirmation whether your infosource contains MPVPOPR or not.
Just goto RSA1 > InfoObjects > search MPVPOPR > double click on found > there is an option "Where used" , just click and check whether your infoobject is present in the infosource or not.
And let me know for the solution.
Thanks
Ramu

Infosource--"0sd_c04"

Similar Messages

Maybe you are looking for