InfoSource activation issue

Hi gurus!
I tried to activate an infosource but the system shows an error:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred during program generation:
Template:   RSTMPL80
Error code: 6
Row:        47
Message:    Statement concluding with "...LIKE" ended unexpect
Procedure
Correct the template to remove the problem.
I tried to replicate the datasource and run the program RS_TRANSTRU_ACTIVATE_ALL but the issue persist.
Does anybody knows what's happening?
Thanks in advance.
Regards.

Try to delete transfer rules and recreate
Program error RSAR245
http://www.sapfans.com/forums/viewtopic.php?f=16&t=73541&p=221354

Similar Messages

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Project Centre - Active Issues and Active Risk columns always show 0

Hello,
We have created a number of Project Centre views to which we have added the "Active Risks" and "Active Issues" columns against projects. No matter how many active issues or risks a project has, these columns are always showing 0 for each
and every project.
The reminders web-part on the PWA home page, and the Issues and Risks page (/PWA/IssuesAndRisks.aspx) correctly show these counts for a user, but Project Centre does not show the values correctly for projects.
We have not changed the values in the "Status" column of either list - they're still the default "(1) Active", "(2) Postponed" and "(3) Closed".
All issues and risks are correctly promoted to the reporting database on publish or when a list item is added/updated/deleted etc.
Our environment was upgraded from Project Server 2010 to Project Server 2013 and we're running service pack 1.
If not now, when?

Hello,
There fields don't actually work, if you want to see the active risks or active issues per projects in a summary row, create a report from the Reporting schema in the Project Web App database.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

0HR_PA_EC_11 ECM InfoSource activation error in BI7

Hi Gurus,
I'm having error during 0HR_PA_EC_11 infosource activation. The error is "Field SALLVMAX of type CURR requires a reference field of type CUKY" while activating after I installed it from standard BI content.
And some error details:
/BIC/CS0HR_PA_EC_11-SALLVMAX (combination reference table/field /BIC/CS0HR_PA_EC_11-/BIC/ANCUR does not exist)
This is for ECM HR mod btw.
Is there any step did i miss out.
Appreciate any assistant.
Thanks in advance.
Edited by: Mohd Irwan Mhd Non on Oct 15, 2008 10:24 AM

Hi
the reference one CUKY is available in AWB?
If you are using BI7 then why do you need infosource,you replicate data source then install transformations and datatarget etc.
In BI7,you dont need infosource concept.
Regards,
Chandu.

Activation issue // Connection problem

Hello Dear assistant,
Since yesterday morning I have been facing with an activation issue. I have been using the same Master Collection CS 5.5 for more than 1 year now and yesterday I had an error that I have never saw before.
"!We are unable to activate CS5.5 Master Collection Subscription Edition
Product activation is required to use this product
You must have a working internet connection to activate this product. Please check your connection settings and choose try Again!"
I have checked my hosts file under the system and it is clean. I am also able to connect to all adobe servers. So I can assure you that my connection settings are perfectly working.
When I install Master Collection CS 5.5 it is only working with Photoshop now. However, if I attempt to open any other one like Illustrator, the activation screen coming up.
Yesterday, I had a conversation with Customer Service here in Chat again. They have mentioned about using multiple accounts might cause this problem. They have canceled one of the accounts and said this issue will be solved within 24hr. So it is almost 24hr and the second day of my working business that I cannot use the prior software to run my business.
Can you please check out the same issue repeated on someone else's case. So you guys can save time to help me.

Moving this discussion to the Downloading, Installing, Setting Up forum.
Smart2011 I would recommend reviewing Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for possible causes of connection errors. The host file is one possible cause but software firewalls can also be another. There are also other solutions available within the referenced document.

Windows 7 - Continuous redeployment time/activation issues

Hello,
I have about 9 classrooms that have from 10 to 25 computers in each along with 30 laptops for offsite use in which the software installed on them changes almost daily depending on what class is being taught. Currently we have been using Comodo Time Machine
on the laptops and previously on the desktops although we are using windows deployment server on the desktops now. My issue is that every time we reimage the systems we are running into activation issues. This system was put into place before I got here and
am trying to find the right direction to head into. It looks like the current windows deployment images sysprepped so that is why they are coming overdue right out of the gate. We do have licensing through the Microsoft Partner Network although im awaiting
access. Staying in the trial zone of the install is what they have been trying to do although the image was not properly configured and is out of date once its put on the system and the black screen comes up. Comodo is quick but lacks the ability to stay current
and only allows for a set amount of images due to space and can lack uniformity. A fast re-image speed would be beneficial but the speed of the deployment server has been working since I start it the day before for the next class. To me it seems like I should
fix the image on the deployment server and see where that takes me. Does anyone have any experience of this type of setup or know any other options?

Hi,
Based on my understanding, you want to auto activate the Windows during the deployment, right?
If yes, What's the type of your license?
If you have KMS server, you don't need do any thing.
If you have MAK license, you cannot set input the key in answer file to activate.
In addition, what the deployment tool did you use?
Karen Hu
TechNet Community Support

Adobe Activation Issue - Offline

Hi,
Am unable to activate my adobe XI pro; am being requested for request codes; how do I access them, kindly assist.

No I have a serial number for CLP 5.0 license program-education
acrobat professional 11.0 MLP AOO License F
Chantal Kamdem
Gestionnaire
Centre de Recherches en Cancérologie de Toulouse
UMR1037 INSERM-Université Toulouse III Paul Sabatier – ERL5294 CNRS
Oncopole Entrée C
2 avenue Hubert Curien
CS 53717
Batiment C, 1ème étage
31037 TOULOUSE CEDEX 1
[email protected]
Tél : 05 82 74 15 88
Le 05/12/2014 20:22, Sabian Zildjian a écrit :
>
Adobe Activation Issue - Offline
created by Sabian Zildjian
<https://forums.adobe.com/people/Sabian+Zildjian> in /Acrobat
Installation & Update Issues/ - View the full discussion
<https://forums.adobe.com/message/6989531#6989531>

CS3 activation issue

I had CS3 on an old back up machine..it had issues and wiped out some of the adobe program. Reloaded software and now i cannot activate as i cannot get anyone at adobe to give me a code...this old machine is not on line. I was on live chat and they are stumped.

Follow the link mentioned below for activation issue -
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#ac tivate-problem
You can also contact us via -
http://www.adobe.com/support/download-install/supportinfo/
Thanks
Garima

InfoSource Activation failing: COPA Datasource Object Version not found

Hi Experts,
I am using BW3.5 & R3 (ECC 5.0) and did::
In BW
1) Installed Business Content
          Cube:         0COPA_C01
          InfoSrc:      0CO_PA_1
In R3
1) I created a new COPA datasource (1_CO_PA500IDEA10)
   and verified data in RSA3.
In BW
2) Replicated the DataSource
3) Created a new Infosource (BB_CO_PA500IDEA10).
4) Editing the new IS, I copied all characteristics
   from the template of the InfoSource 0CO_PA_1.
         a) Assigned my COPA DS (1_CO_PA500IDEA10).
         b) In "Transfer Rules" tab I was able to map
            ALL the IS fields to DS fields.
         c) In "Datasource/Transfer structure" tab
            some fields are left blank (I didn't assign
            any IS characteristics or KeyFigs)
Saved the IS.
BUT Activating the IS is failing with the error:
Object 1_CO_PA500IDEA10 object version not found in table
Message no. RSAR768
A couple of times, I deleted the IS in BW, DS in R3, created them again, replicated, .......with no luck
Any help is appreciated?
Thanks, BB

Dear A.H.P
I admire your energy!
I took a look at the RSBASIDOC table entries in BW and ECC systems for the SourceSystems:
   1) ID3CLNT506 - that is working
   2) T20CLNT400 - that is NOT working
I copied some of the fields as a table below. Please take a look. I inserted ** as a field separator to keep the "text fields seperate".
Three relevant fields: BIDOCTYP, SBWBCRL (blank in BW) & RBWBCRL (blank in BW) are not the same between BW & ECC systems - For the problematic T20CLNT400.
Is SBWBCRL - The BW Service API version in ECC ?
Is RBWBCRL - The BW version in BW system ?
I will take a look at the Inbound/Outbound paramaters in WE20 on both BW & ECC.
It seems I am doing all this to convince our BASIS guys that THEY need to FIX the problem.
THanks, BB
Table:          RSBASIDOC Entries
BW SourceSystem ID3CLNT506 - which is working
            in BW          **in ECC
SLOGSYS     **ID3CLNT506     **ID3CLNT506
RLOGSYS     **SBW            **SBW
BIDOCTYP    **ZSSC085        **ZSSC085
TSPREFIX    **SC             **SC
TSTPNM      *SAP           **RFCUSER
TIMESTMP    **20.060.226.192.529   **20.060.226.192.529
SBWBCRL     **30C            **30C
RBWBCRL     **350            **350
BW SourceSystem T20CLNT400 is giving problem during InfoSource Activation
            in BW          **in ECC
SLOGSYS     **T20CLNT400     **T20CLNT400
RLOGSYS     **SBW            **B3TCLNT800
BIDOCTYP    **ZSSB004        **ZSBB216
TSPREFIX    **SB             **BB
TSTPNM      **USER01         **USER12
TIMESTMP    **20.051.023.080.630     **20,060,213,213,230
SBWBCRL     **(Blank)        **30C
RBWBCRL     **(Blank)        **310

Everyone having issues with i4s:Activation issues,dropped calls,no SMS,no Network...read this for a temp fix!

All,
for all the users out there that have issues with thier new i4s having:
dropped calls
no SMS
no Network
Activation Issues
MultiSIM issues
etc.
You guys must DISABLE your SIM PIN!
I know this is not the best thing to do, but until Apple fixes this, this is the only solution right now!
-> Settings
->Phone
-> Disable SIM PIN
...done...
Cheers

Truth of the matter is ATT was not ready for this. I was ready to turn in my 3G
and go back to my old iPhone when a tech rep at Apple told me to turn off
3G. I went from full bars at home to only one when 3G was on and all of my
calls were getting dropped. After the rep told me this I replied, "excuse me?
You mean the reason I bought the new iPhone, so I can talk and email at the
same time on the 3G network, is not even doable yet?" He replied that they've
been telling customers to turn off the 3G and then the phone would work fine -
which it did. Now I just keep it on the edge network and hope that one day the
3G network will be up to speed and I live in LA! So give it a shot and turn off 3G.
Thanks ATT!

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues ove

I bought and legally own PS CS3. Installed on a desktop and the machine died completely. Downloaded a trial of CS3 from Adobe site. Went to activate and said too many activations. Activate over the phone. EXCEPT Adobe does not handle activation issues over the phone. Adobe doesn't care about their older products - they don't care that I spent hundreds of dollars for CS3. This is truly disgusting corporate behavior. Is there anything I can do? We aren't all rich photographers. I paid a great deal of money for this product. Is it now useless?Thank you,
James Scott

HI James please contact the Adobe Chat Team for activation issue
kindly do the mentioned steps as follow in order to get hold of chat rep of adobe
Go to www.adobe.com/getsupport
select the product as adobe creative suite - then select the issue as adobe id and sign in - and then click on still need help contact us then you will be able to find chat option and they will help you with the chat issue

RAID array activation issue in CS2 & XP

Yes, I still have CS2, which I love, as well as Production Studio. I have used CS2 for years with a RAID array, first striped and now a mirror. The mirror array lasted about 10 months until the motherboard went. eVGA replaced the motherboard with the same model, I fiddled around a bit trying to get my same array up and running, I couldn't figure it out and ended up doing a reinstall (after a couple of weeks of running single drives). Anyway, I keep having to activate my Adobe Suites. I have talked to people (thick accents, maybe in India) three times now; takes a lot of time. I know that there is an issue with CS2 and RAID (XP and CS2 have all of their available updates). I tell them I have RAID. I ask for a patch to avoid the activation issue. I have been told that I "should not be using RAID", that I will "have to reactivate every time I boot" and that I won't be able to run this "without upgrading to CS4". I KNOW that this configuration will work, because it has worked in the past. I vaguely remember a patch when I originally installed.
I just called the Tech Support number, instead of the activation number. I also got someone with a thick accent who told me that he had no support available for CS2. He wouldn't give me a phone number to call, I asked about a patch and he "doesn't support CS2", end of discussion. He suggested the website. Ugh!
I am not locked out at this time, but have just done another reactivation. I suspect Adobe will put a stop to repeat activations. I worry about being locked out when I am under the gun trying to finish something. My son is working on a school project for the end of year right now. What can I do? Does anyone know where I can find a patch or talk to someone who will help a CS2 user?
I LIKE my RAID array. I know that my data is perfectly backed up at all times. I would prefer not to have to break the RAID array into single drives. I chose this MB because of the RAID capability.
Thanks in advance!

Thanks Bob. I asked to speak to a supervisor with calls two and three to India, or wherever. One lady said they didn't have a supervisor and then said, well, of course we have supervisors, but they will not be able to help. I guess I could have thrown a fit, but neither was willing to connect me to a supervisor even though I asked. I did find it amusing (in a sad way) that the one lady initially denied that she had a supervisor.
I then called Customer Support (call number four) and they simply wouldn't talk to me. They don't deal with CS2, didn't want to talk to me at all.
I guess I'll try India again, next time it locks me out.
I'll go through old files (again) to see if I saved some kind of patch.
Thanks again.

Write -Optimized DSO Activation Issue

Hi Experts,
when ever I am activating the DSO(WRITE-OPTIMIZED), I am getting error like
"no PSA for InfoSource and source system in Bi 7.0"
Can you pls provide solution for this issue.
considerations:
1. This Write-Optimized DSO does n't contain any semantic keys,all are taken as DATA Fields.
2. I tried by checking and unchecking the uniqueness of data check box.
Thanking You,
R.Dama

Hi Experts,
I know that only active data table is available in WO-DSO.I am not trying to add activate process in Process Chain.
And, I am not trying in Data Load time.
I am saying that ,the problem is while creating WO-DSO, we need to activate dso..right
ErrorIt is in the Initial step while creating WO-DSO.
Pls help me and clarify that why I am getting that error message..

CS4 Master Collection Activation issue

I have installed CS4 master collection on my 2 PC's.
The first of these was a new build PC using Vista Ultimate 64bit, I installed Vista and CS4 on a RAID 0 array comprising 3 Sata drives. CS4 was then activated on this machine as well as my other machine.
After a couple of days the RAID array started showing errors, which I believe was down to the poor nVidia drivers / onboard controller.
Anyway I reinstalled Vista & CS4 onto a single drive, when it came to activating CS4 however I get a message saying the serial no. has already been activated on 2 machines.
Now Adobes FAQ states that CS4 will recognise a reinstall on the same machine, however I think that because I have gone from a RAID array to a single drive then CS4 will not be able to detect this as the data will have been spread over the 3 physical drives.
I have contacted Adobe support and am waiting on a response, in the meantime is there something simple I have missed?

The RAID problem was with CS2.
The OP's issue is that he didn't deactivate before reinstalling. Only
Adobe can help and there should be a phone number to call for activation
assistance on the activation denial screen.
Bob

IPhone 6 AT&T Activation Issues

To whom it may concern…. I thought I would share my story so another poor sole would not have to experience it.. I received my new iPhone 6 ordered through the Apple Store online. Powered on the device, started to go through the activation process, got to the area to enter my providers (AT&T) billing zip code and last four digits of my social security number… This failed; stating the information I was entering was incorrect. I noticed I had cell coverage, turned off WiFi to confirm it was indeed connected, and it was, tried again it failed.. Restarted the device, tried again still no dice… I then tried performing the same series of steps through iTunes, still with no luck. Tried a updated MAC and even a Windows PC… I have no firewalls in place and actually disabled anything that could remotely be blocking the connection on my home personal network. Confirmed my host file was not altered in any way as well. SO.. per instructions from the ever so handy prompts... I call the 800 number listed in the prompt. I then get directed to PURCHASE a support package for this call... I refuse and sit in silence to then get re-directed to someone.. (genius I know) This person told me that he actually just got off the phone with someone that had the same or similar sounding issue, and advised me to call AT&T. So.. I then call AT&T.. long story short.. They confirm the information I am entering in is indeed correct. Was able to confirm ICCID and IMEI number and they did indeed see on their portal my phone was indeed activated… yet on the device itself, it displayed the information I was entering was incorrect. They confirmed the network I was on showed the correct set of APNs, that the correct calling plan was active and the terms and agreements were accepted. All showing the account was perfectly fine.. Not knowing the exact relationship between AT&T and Apple’s servers and how this information is shared or past along… tried to restore the device.. Booted the phone into restore, device prompts to connect to iTunes, I connect device, message states to download ios8 and install. I proceed… I then get the following error 3194 in iTunes on my MAC, more than likely because I’m on preview of Yosemite I thought.. and I’m sure I signed something somewhere noting I could experience a wide range of issues and that “Apple” was not at fault.. Which is cool… SO.. back over to the deeded Windows machine… upgraded iTunes, attempted to restore, and what do you know.. the restore worked.. Ever so anxiously I wait for the device to boot up… I was presented with similar notifications.. BAM failed again.. AT&T support told me to go to an AT&T store… Livid I do this… after an hour of trying the same troubleshooting steps, not listening to my various troubleshooting steps… they did try a new SIM just to see, hoping that would work, but it didn’t. They told me to go to an Apple store… I then drive to an Apple store, of course it was packed, who doesn’t wasn’t a new iPhone!? I was assured specialists were on site, and they were. Three AT&T “experts” never saw this issue.. SO… they gave me a new phone.. 5 hours after getting my new phone and various hours explaining over and over again what the issue was and it is in no database anywhere… please.. add this to a database or article somewhere… The fix was a new phone…. IF there is a logical explanation for all of this. I would LOVE to hear it. -A loyal Apple customer Brandon

Same issue here! I've been on the phone with ATT and Apple a total of over 3 hours yesterday about this issue. Both companies point fingers at each other.
I restored the phone with iOS8... didn't help.
Here are my scenarios:
1. Wifi connection = Get 'ATT was unable to verify your identity' error.
2. iTunes connection = Get 'ATT was unable to verify your identity' error.
3. Cellular connection = Get 'It may take a few minutes to activate your iPhone', and then says 'ATT activation server can not be reached'.
Simply put, Apple blames it on ATT's activation servers. ATT tells me everything on their end is already activated for me, and that its a phone issue that apple must resolve. I tell Apple this, and the only thing left to do is get a new phone. But when I have a 6+, it'll be WEEKS before thats possible.
TERRIBLE EXPERIENCE.
I have a thread on macrumors.com regarding the issue and SEVERAL people are experiencing it.
http://forums.macrumors.com/showthread.php?t=1783862

InfoSource activation issue

Similar Messages

Maybe you are looking for