Infospoke on a Cube returns zero records
Hi
I am working on BW 3.5.
I am trying to extract data from a Cube using Infospoke.
Every time I run the Infospoke it returns 0 records!
I tried to extract to Table/File with same result.
When I use infospoke on ODS's or IO it works ok.
Any idea's?
Reg's
Edan
Pl check if you have data in the cube.
Secondly, if you have selections in the characteristics selection, pl check that out.
Ravi Thothadri
Similar Messages
-
Global Temp Table, always return zero records
I call the procedure which uses glbal temp Table, after executing the Proc which populates the Global temp table, i then run select query retrieve the result, but it alway return zero record. I am using transaction in order to avoid deletion of records in global temp table.
whereas if i do the same thing in SQL navigator, it works
Cn.ConnectionString = Constr
Cn.Open()
If FGC Is Nothing Then
Multiple = True
'Search by desc
'packaging.pkg_msds.processavfg(null, ActiveInActive, BrandCode, Desc, Itemtype)
SQL = "BEGIN packaging.pkg_msds.processavfg(null,'" & _
ActiveInActive & "','" & _
BrandCode & "','" & _
Desc & "','" & _
Itemtype & "'); end;"
'Here it will return multiple FGC
'need to combine them
Else
'search by FGC
SQL = "BEGIN packaging.pkg_msds.processavfg('" & FGC & "','" & _
ActiveInActive & "','" & _
BrandCode & "',null,null); end;"
'will alway return one FGC
End If
' SQL = " DECLARE BEGIN rguo.pkg_msds.processAvedaFG('" & FGC & "'); end;"
Stepp = 1
Cmd.Connection = Cn
Cmd.CommandType = Data.CommandType.Text
Cmd.CommandText = SQL
Dim Trans As System.Data.OracleClient.OracleTransaction
Trans = Cn.BeginTransaction()
Cmd.Transaction = Trans
Dim Cnt As Integer
Cnt = Cmd.ExecuteNonQuery
'SQL = "SELECT rguo.pkg_msds.getPDSFGMass FROM dual"
SQL = "select * from packaging.aveda_mass_XML"
Cmd.CommandType = Data.CommandType.Text
Cmd.CommandText = SQL
Adp.SelectCommand = Cmd
Stepp = 2
Adp.Fill(Ds)
If Ds.Tables(0).Rows.Count = 0 Then
blError = True
BlComposeXml = True
Throw New Exception("No Record found for FGC(Finished Good Code=)" & FGC)
End If
'First Row, First Column contains Data as XML
Stepp = 0
Trans.Commit()Hi,
This forum is for Oracle's Data Provider and you're using Microsoft's, but I was curious so I went ahead and tried it. It works fine for me. Here's the complete code I used, could you point out what are you doing differently?
Cheers,
Greg
create global temporary table abc_tab(col1 varchar2(10));
create or replace procedure ins_abc_tab(v1 varchar2) as
begin
insert into abc_tab values(v1);
end;
using System;
using System.Data;
using System.Data.OracleClient;
class Program
static void Main(string[] args)
OracleConnection con = new OracleConnection("data source=orcl;user id=scott;password=tiger");
con.Open();
OracleTransaction txn = con.BeginTransaction();
OracleCommand cmd = new OracleCommand("begin ins_abc_tab('foo');end;", con);
cmd.Transaction = txn;
cmd.ExecuteNonQuery();
cmd.CommandText = "select * from abc_tab";
OracleDataAdapter da = new OracleDataAdapter(cmd);
DataSet ds = new DataSet();
da.Fill(ds);
Console.WriteLine("rows found: {0}", ds.Tables[0].Rows.Count);
// commit, cleanup, etc ommitted for clarity
} -
Query returns zero records in coldfusion context, but works fine in Navicat
I've got a query that's returning zero records when I load a page. If I copy and paste that same query (from the debug output) into navicat, I get rows returned (as I expect). Has anyone seen this? It happens locally (CF9) AND remotely on our staging server (CF10). Even weirder, it's a query that was previously working fine - I simply added an if statement to the where clause, and all of a sudden...
Here's the query:
<CFQUERY name="LOCAL.getEncounterServices" datasource="#REQUEST.dsn#">
SELECT
a.EncounterProductID,
a.DateTime AS ServiceDate,
aa.CartItemID,
aaa.CartID,
aaaaa.CartStatus,
b.ProductID,
b.ProductName,
b.CPTCode,
b.Price,
c.EncounterID,
c.DateTimeClosed AS EncounterClosedDate,
d.FirstName,
d.LastName
FROM
EncounterProducts a
LEFT JOIN CartItemProduct aa ON (a.EncounterProductID = aa.EncounterProductID AND aa.Active = 1)
LEFT JOIN CartItem aaa ON (aa.CartItemID = aaa.CartItemID)
LEFT JOIN Cart aaaa ON (aaa.CartID = aaaa.CartID)
LEFT JOIN CartStatus aaaaa ON (aaaa.CartStatusID = aaaaa.CartStatusID),
Product b,
Encounters c,
Contacts d,
EncounterStatuses e
WHERE
1 = 1
AND (aa.CartItemID IS NULL OR aaaaa.CartStatus = 'Deleted')
AND a.Active = 1
AND a.ProductID = b.ProductID
AND a.EncounterID = c.EncounterID
AND c.PatientID = d.ContactID
AND c.EncounterStatusID = e.EncounterStatusID
AND e.EncounterStatus = 'Closed'
<CFIF IsDefined("ARGUMENTS.encounter") AND IsObject(ARGUMENTS.encounter)>
AND c.EncounterID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.encounter.getID()#">
<CFELSE>
AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
</CFIF>
AND c.LocationID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.locationID#">
AND c.CustomerID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.customerID#">
</CFQUERY>
All of this worked just fine before I added the lines:
<CFIF IsDefined("ARGUMENTS.encounter") AND IsObject(ARGUMENTS.encounter)>
AND c.EncounterID = <CFQUERYPARAM cfsqltype="cf_sql_integer" value="#ARGUMENTS.encounter.getID()#">
<CFELSE>
AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
</CFIF>
Previously, it had just been:
AND c.DateTimeClosed >= <CFQUERYPARAM cfsqltype="cf_sql_date" value="#ARGUMENTS.startDate#">
AND c.DateTimeClosed < <CFQUERYPARAM cfsqltype="cf_sql_date" value="#DateFormat(DateAdd('d', 1, ARGUMENTS.endDate), 'yyyy-mm-dd')# 00:00:00">
With no IF/ELSE statement.
Anyone seen anything like this before? Any ideas?
Thanks.Right, I'll start disabusing myself of the DateFormat!
I'm sorry, I should've posted the actual query too. It's inserting the first part - "AND c.EncounterID = ....."
Here's the full query:
LOCAL.getEncounterServices (Datasource=xmddevdb, Time=9ms, Records=0) in /Applications/ColdFusion9/wwwroot/XMD_NEW/xmd_dev/cfc/ShoppingGateway.cfc @ 16:56:28.028
SELECT
a.EncounterProductID,
a.DateTime AS ServiceDate,
aa.CartItemID,
aaa.CartID,
aaaaa.CartStatus,
b.ProductID,
b.ProductName,
b.CPTCode,
b.Price,
c.EncounterID,
c.DateTimeClosed AS EncounterClosedDate,
d.FirstName,
d.LastName
FROM
EncounterProducts a
LEFT JOIN CartItemProduct aa ON (a.EncounterProductID = aa.EncounterProductID AND aa.Active = 1)
LEFT JOIN CartItem aaa ON (aa.CartItemID = aaa.CartItemID)
LEFT JOIN Cart aaaa ON (aaa.CartID = aaaa.CartID)
LEFT JOIN CartStatus aaaaa ON (aaaa.CartStatusID = aaaaa.CartStatusID),
Product b,
Encounters c,
Contacts d,
EncounterStatuses e
WHERE
1 = 1
AND (aa.CartItemID IS NULL OR aaaaa.CartStatus = 'Deleted')
AND a.Active = 1
AND a.ProductID = b.ProductID
AND a.EncounterID = c.EncounterID
AND c.PatientID = d.ContactID
AND c.EncounterStatusID = e.EncounterStatusID
AND e.EncounterStatus = 'Closed'
AND c.EncounterID = ?
AND c.LocationID = ?
AND c.CustomerID = ?
Query Parameter Value(s) -
Parameter #1(cf_sql_integer) = 28
Parameter #2(cf_sql_integer) = 16
Parameter #3(cf_sql_integer) = 6
Thansk again for the help! -
0fi_ar_4 INIT returning zero records
Hi gurus,
0fi_ar_4 INIT is returning zero records while loading into ODS.I have checked in RSA3 it is returning zero records with INIT selection but is it is fetching records with Full update.Can ne one tell me what to do.how to solve this problem.
rgds,
***Points Assured**Hi Suravi,
Check at the Info Package selection-- Init with out data transfer.
Make it with data transfer..
Hope it helps.. -
0PS_WBS_EVA (earned value) returns zero records
Hello,
I've activated the business content datasources for Project systems. I'm unable to get any records for earned values from R/3. The following datasources show zero records:
0PS_WBS_EVA
0PS_NWA_EVA
0PS_ORD_EVA
0PS_NAE_EVA
Can anyone tell me the tables to where these datasources are hitting? Help.SAP wasn't much of a help. I have already looked there.
Are there any settings within ECC that need to be changed in order to get data for the above datasources?
I'm getting data for the CO datasources related to project systems, such as 0CO_OM_WBS_6, 0CO_OM_OPA_6 and so on.
Due to zero records from the above datasources, there is no data coming in the Earned Values cube of Project systems.
Regards,
SameerDear Oscar,
Thanks for your response,
The Actual Cost posted by our Functional Consultant is USD 250, but i am getting the Total Actual cost is ZERO (Sum of -250 +250) as i shown above.
the posted actual cost is +250, finally we need this figure only,
if i do restriction on Sender receiver Indicater field with S than i will get Actual Cost 250, but in SAP standard RKF for Actual Cost there is no restriction on Sender receiver Indicater field (S & H)
I hope you got my point now.
Thanks
Amar Reddy -
Export Datasource Returning 0 Records
Hi,
I have an export datasource on a COPA cube. This data source returns zero records when the infopackage is run. However, in RSA3 and LISTCUBE it returns records correctly.
I set a breakpoint in Function Module RSDRC_CUBE_DATA_GET. This worked fine in RSA3 but on running the InfoPackage the breakpoint was not reached so I guess the problem is before this.
I tried deactivating the V fact table view but this has no effect.
Any ideas why this may be happening? Or any ideas how I can debug this further? What Function Modules are called when an Infopackage is executed?
Regards, LeaDo you have any restriction on your infopackage? Ar eyou making a full load?
if you do not have any restriction, try to regenerate again the Export Datsource and restart the loading.
Which is your release?
Mike -
Zero records in Delta Queue for Non-LO Datasource
Hi,
I have a process chain which loads data daily and last loaded on 5th of this month which is a delta load to DSO, and then I have triggered process chain on 10th and now the process chain got successful but delta is returning zero records. I have gone through the Delta queue monitor, in that the data source is showing 0. what could be the reason for this? The data source is a Generic data source built on View and it is not a LO data source and delta is on timestamp.
Thanks,
Karan.Hi lokesh.
Repair Full delta option it wont distub existing deltas.....
repair full delta put full update indicate request as repair request.
Via the Scheduler menu we can indicate a request with full-update mode as Repair Full Request. This request can be updated into every data target even if the data target already contains data from an initialization run or delta for this Data Source/ source system combination, and has overlapping selection criteria. -
Hi,
A daily load from ODS to Cube is scheduled but the source may or may not have records. so every time the source hass zero records the load happens till the ODS and the status for the ODS remains yellow.
I manually change it to green and activate the request so that the process continues. Is there a way to automate this so that eventhough there are zero records in the load the ODS is activated.
Help would be appreciatedHi
You can do this.
RSMO>select your request>settings>Evaluation of requests(traffic lights)>
IF no data is available in the system the request-->select the radio button.Status Successful..
Hope it helps
Thanks
Teja -
Parameter Field Value returns "no records"
I am using Crystal 11 and am new to Crystal but not to other Reportwriters. I have a Crystal report that has 2 parameter fields, one is "Enter Date" that prompts for the start and end date, the other "Select Items" prompts for the supply Item Numbers to be included in the report. In the "Edit Parameter: Select Items:" edit/create parameter dialog, the Select Item parameter has "Allow Multiple values" and "Allow discrete values" set to true. The report runs fine and returns any items entered in the "Select Items" prompt that has usage during the start & end date. My problem is ... if the entered Item Number for the Select Items parameter returns no records, I cannot report that Item Number as having zero usage. I cannot find a way at the time of report running to identify and report the "not found" items. I would also like to report the Start and End Dates parameters requested, but cannot, the Enter Date parameter returns an empty parameter field across the whole report. I'm sure other users have had this problem of reporting the requested parameter values. Need assistance.
Jeff's answer is one way to do it. There are others:
If you want the items with no data interspersed with the other items (say, in item number order), then you'd change the report to use your item master table and do a left join from that to the usage data. If a field from the usage table is null, then there was no usage, and you can condition a message based on that.
Or, if your parameter selects item numbers without some type of "ALL" option, then you can use arrays to keep track of which if the selected items printed. Then in the report footer, compare the list of items reported to the parameter items, and show which item numbers had no usage. (This might run a tad faster than the separate subreport that Jeff suggested - but maybe not...)
HTH,
Carl -
I am making the following REST call from a SharePoint Designer workflow:
Site-URL/_api/search/query?querytext='WorkEmail:*zafgen.com'&rowlimit=10&startrow=0&selectproperties='LastName,FirstName,WorkEmail,JobTitle,Path,PictureUrl,PreferredName,Department,AboutMe'&SourceId='b09a7990-05ea-4af9-81ef-edfab16c4e31'
When I make this call from a designer workflow running as the user who started it (The user is a site collection admin) I get the results shown below. NOTE that I get ZERO records. If I take the url above and place it in the address bar
of any browser, I get back 10 users. (Exactly what I asked for.) Furthermore, if I try to put the call to a REST service in a APP Step, I get a failure return code:
{"error":{"code":"-1, Microsoft.Office.Server.Search.REST.SearchServiceException","message":{"lang":"en-US","value":"An unknown error occurred."}}}
I have no issues making REST calls to SharePoint Lists and Libraries, but a call to search seems to have issues. Any thoughts?
{"d":{"query":{"__metadata":{"type":"Microsoft.Office.Server.Search.REST.SearchResult"},"ElapsedTime":135,"PrimaryQueryResult":{"__metadata":{"type":"Microsoft.Office.Server.Search.REST.QueryResult"},"CustomResults":{"__metadata":{"type":"Collection(Microsoft.Office.Server.Search.REST.CustomResult)"},"results":[]},"QueryId":"deba5b38-d89e-46d6-9911-a4280beead31","QueryRuleId":"00000000-0000-0000-0000-000000000000","RefinementResults":null,"RelevantResults":{"__metadata":{"type":"Microsoft.Office.Server.Search.REST.RelevantResults"},"GroupTemplateId":null,"ItemTemplateId":null,"Properties":{"results":[{"__metadata":{"type":"SP.KeyValue"},"Key":"GenerationId","Value":"9223372036854775806","ValueType":"Edm.Int64"},{"__metadata":{"type":"SP.KeyValue"},"Key":"indexSystem","Value":"","ValueType":"Edm.String"},{"__metadata":{"type":"SP.KeyValue"},"Key":"ExecutionTimeMs","Value":"63","ValueType":"Edm.Int32"},{"__metadata":{"type":"SP.KeyValue"},"Key":"QueryModification","Value":"WorkEmail:*zafgen.com
ContentClass=urn:content-class:SPSPeople","ValueType":"Edm.String"},{"__metadata":{"type":"SP.KeyValue"},"Key":"RenderTemplateId","Value":"~sitecollection\/_catalogs\/masterpage\/Display
Templates\/Search\/Group_Default.js","ValueType":"Edm.String"},{"__metadata":{"type":"SP.KeyValue"},"Key":"StartRecord","Value":"0","ValueType":"Edm.Int32"},{"__metadata":{"type":"SP.KeyValue"},"Key":"IsFirstBlockInSubstrate","Value":"true","ValueType":"Edm.Boolean"},{"__metadata":{"type":"SP.KeyValue"},"Key":"IsLastBlockInSubstrate","Value":"true","ValueType":"Edm.Boolean"}]},"ResultTitle":null,"ResultTitleUrl":null,"RowCount":0,"Table":{"__metadata":{"type":"SP.SimpleDataTable"},"Rows":{"results":[]}},"TotalRows":0,"TotalRowsIncludingDuplicates":0},"SpecialTermResults":null},"Properties":{"results":[{"__metadata":{"type":"SP.KeyValue"},"Key":"RowLimit","Value":"10","ValueType":"Edm.Int32"},{"__metadata":{"type":"SP.KeyValue"},"Key":"SourceId","Value":"b09a7990-05ea-4af9-81ef-edfab16c4e31","ValueType":"Edm.Guid"},{"__metadata":{"type":"SP.KeyValue"},"Key":"CorrelationId","Value":"6288bf51-64fc-45de-a9ca-d62c36e3ebd1","ValueType":"Edm.Guid"},{"__metadata":{"type":"SP.KeyValue"},"Key":"WasGroupRestricted","Value":"false","ValueType":"Edm.Boolean"},{"__metadata":{"type":"SP.KeyValue"},"Key":"EnableInterleaving","Value":"true","ValueType":"Edm.Boolean"},{"__metadata":{"type":"SP.KeyValue"},"Key":"piPageImpression","Value":"16620813_415_1033","ValueType":"Edm.String"},{"__metadata":{"type":"SP.KeyValue"},"Key":"SerializedQuery","Value":"","ValueType":"Edm.String"}]},"SecondaryQueryResults":{"__metadata":{"type":"Collection(Microsoft.Office.Server.Search.REST.QueryResult)"},"results":[]},"SpellingSuggestion":null,"TriggeredRules":{"__metadata":{"type":"Collection(Edm.Guid)"},"results":[]}}}}
Marcel MethHi,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Popularity Trends report always returns zero
Hello,
I have a SharePoint installed on “Windows server 2008 -R2”.
I have a SQL Data base installed on the same machine.
I create a new web application with port “2020”. Then I create w new site collection “Publishing”.
I activate the feature “Reporting” in the site collection level.
I Open central admin “Monitoring >> Configure usage and health data collection”. I checked “Enable usage data collection” Check box. And I Checked All “Events to Log” check boxes.
I have configures the following services applications :
-Business Connectivity Service
-Excel Services Application
-Search Service Application
-Security Token Service Application
-Application Discovery and Load Balancer Service Application
-WSS_UsageApplication.
I run the crawl search. And it is completed successfully.
The search service account is member of “WSS_WPG” group.
I have checked the following values from SharePoint PowerShell:
AppEventTypeId : 00000000-0000-0000-0000-000000000000
EventTypeId : 1
EventName : Views
LifeTimeManagedPropertyName : ViewsLifeTime
RecentManagedPropertyName : ViewsRecent
ApplicationName :
RecommendationWeight : 1
RelevanceWeight : 1
RecentPopularityTimeframe : 14
AggregationType : Count, UniqueUsers
Rollups : SiteSubscriptionId, SiteId, ScopeId
TailTrimming : 2
Options : AllowAnonymousWrite
IsReadOnly : False
I open the “default.aspx” page on the portal (I have opened it more than 10 times in different browser window).
Next day I open “popularity Trends” report, I found that it returns zero.
I open the “Analytics Report” data base. Then I open “AnalyticsItemData” table. There are already items in the table.
So I need to know why the “popularity Trends” excel sheet report returns zeros all the time.
ASkHi,
According to your description, the popularity Trends report always returns no records.
Please check the status of the 3 timer jobs: Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing and Web Analytics
Trigger Workflows to see if they are configured to run at regular intervals.
Also you can take a look at the two links about the similar issue for more information:
http://www.myriadtech.com.au/blog/Ben/Lists/Posts/Post.aspx?ID=7
http://sharepoint.stackexchange.com/questions/66476/whats-popular-webpart-is-empty
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
Hi,
Please give your suggestion for following problem.
we are loading data from ETL (Flat File - Data Stage) into SAP BW 3.1.
data may contain Zero records. When we try to push the data into BW. At ETL side, it is showing successful data transfer. At, BW side it is showing "Processing state" (Yellow light). and all BW resources are hang-up.
When we try to send another data load from ETL side, We could not push the data as BW resources are hang up by the previous process.
Whenever we are getting this kind of problem, we are killing the process and continuing with another data Re-load. But this is not a permanent solution. This is happening more often.
What is the solution for this problem?
One of my colleague suggested following suggestion. Shall I consider this one?
Summary: when loading with empty files, data may be in the processing state in BW
Details: When user load with empty file(must be empty, can not have any line returns, user can check the data file in binary mode), data is loaded into BW with 0 records. BW will show be in yellow state(processing state) with 0 record showing, and in the PSA inside BW, 1 datapacket will show there with nothing inside. Depends on how user configured their system, BW server can either accept the 0 record packet or deny it. When BW server is configured to accept it, this load request will change to green state(finished state). When the BW server is configured to deny it, this load request will be in the yellow state.
Please give me ur suggestions.
Thanks in advance.
Regards,
VPRhi VPR,
have you tried to set the light 'judge'ment
go to monitor of one request and menu settings->evaluation of requests(traffic light), in next screen 'evaluation of requests', 'if no data is avaible in the system, the request' -> choose option 'is judged to be successful' (green).
Set delta load to complete when no delta data
hope this helps. -
Account Transformation CALCACCOUNT.LGF returns 0 records
Hi,
Account transformation through CALCACCOUNT.LGF returning 0 records.
Created a Account Transformation Business rule as follows -
Transformation group Name - AST
Source Account - CASH
Category - ACTUAL
Source Flow - NONE
Source DatsSrc - SYSTEM
Similarly maintained values for -
Destination Account - D_CASH
Destination Category - ACTUAL
Destination Source Flow - ENDBAL
Destination DatsSrc - SYSTEM
Source period = -1
all other values like Source Year,Apply to YTD,Remark,Level, Forced into Member are left blank.
Scrip Logic -
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
ENTITY=%ENTITY_SET%
CALC=AST
*ENDRUN_PROGRAM
Script runs succesfully, however returns 0 records.
RUN CALC_ACCOUNT
0 SUBMITTED, 0 SUCCESS, 0 FAIL.
SCRIPT RUNNING TIME IN TOTAL:1.94 s.
LOG END TIME:2011-06-28 01:38:25
Can some one please advise on the "checks" to be performed to run the script succesfully.
I know out of experience even if a simple property is not set, script does not run.
Inputs appreciated.
Thanks.With this, one thing to be aware of is that if you have run an account transformation rule on a data set already, and you a re-running it yet the data has not changed - there will be 0 records generated.
I recommend changing the data - do a simple zero and input data then save - then re-run, check if that works.
Nick -
Zero 'Records Summarized' in aggregate
Hi gurus,
I created an simple aggregate based on a cube, but the 'Records Summarized' value is zero. I know value '1' means the aggregate is a copy of the InfoCube and I think that is already the worst situation. What does zero indicates?
This cube is non-cumulative and thus any time characteristic should be based on 0CALDAY. But once this is done, basically no data would get compressed as 0CALDAY is one part of this aggregate. Is there any way to remove the whole time dimension?
Thanks in advance.Dear,
can you please do the things below mentioned.
create one temperory cube, load different data...
now create one aggregate for that cube. and do rollup.
now again load some new data into the cube and now first rollup aggregate.
check no. of record.
now compress cube. and again rollup data into new aggregate.
i think your problem may be caused by the compression into cube.
or else
you can check actual contents of aggregates.
hope this help you.
Regards
Vinay -
0PM _ PRM_PLCS_1 Datasource returns 0 Records
Gurus,
I have a problem with this datasource (0PM _ PRM_PLCS_1). I am trying to map it to cube 0PM_C05, but the datasource is returning 0 records and I cannot go further than that. I have followed the steps I found in the following thread: (datasource 0PM _ PRM_PLCS_1 retrieves null records). I also found the same steps in OSS Note: 788120 by going to SE54 before SM30 to fill in all the parameters and saved. I did not do anything more than that.
When I returned to check the ectractor, I still have 0 records. This datasource cannot be edit in RSA6, I guess because it's Function Module. I also noticed that none of the fields were selected to be displayed because it's greyed out. What step am I missing? Please help!
Regards,
ReccaHere is some additional info on this topic from OSS Note:
Settings:
Before you can use the extractor for the first time, you must maintain the TMP_C05 Customizing table. To do this, carry out the following steps:
Call transaction SE54. Specify TPM_C05 as the table to be edited. Select the 'Test' button. The 'Maintain Table Views' screen now appears (transaction SM30).
Enter TPM_C05 in the 'Table/view' text field. Select the 'Maintain' button. You can now fill the table:
In the Date: Task List field, enter the date when you want the routing costs to be calculated.
In the Order Type field, define the order type that you want to use to simulate the routings.
Enter the time period when you want the maintenance plan costs to be calculated in the Date:Maint.Plan fields. Enter the start date in the upper field and the end date of the time period in the lower field.
In the Package Size: TL field, you define the size of the packages used internally when the routing execution costs are calculated (see Performance below).
In the PckSize:MainPln field, you define the size of the packages used internally when the maintenance plan execution costs are calculated (see Performance below).
When you select the Add.GK-Zuschl. checkbox, you define whether overhead costs are taken into account in the calculation.
Save the changes.
Regards,
Recca
Maybe you are looking for
-
Trying to update my N8 to "Anna" is driving me mad...
i have been trying to update my N8 for the last 6 hours... it won't update using ovi suite... i;m having to use "Nokia Software Updater 3" it took 9 hours for the programme to download the files.. and now it wont install them. it works for a short pe
-
Hi, I'd like to know the proper format of the POST request to a sender soap adapter with SMIME activated. I've found almost no documentation about it. I'm trying to send a document ciphered to PI via soap adapter (HTTP POST). I've done the following
-
Is there any possible way to view my messages for the month of jan and feb. of this year
is there any way to view messages i sent in the month of jan. and feb. of this year
-
Transport of namespace to different Software Component
Hi friends, I have designed a interface in test software componet now i need to export to another software componet in the same system. i mean in development system onley,, Thanks and Regards Vijay
-
My iMac hard drive only has about 100 gb of use on it. But my backup disk has over 300 gb of usage on it. For instance, my iphoto library shows about 13 gb of photos but the backup disc shows almost 20 gb of photos in the iphoto library. Why would th