InfoSpokes with Chain Processer Error.

Hi:
I have the following problem, I'm working with InfoSpokes chains and processes. But I have been presented a problem when running chains, SAP BI.
Originally the request log contained the following message "The 3rd party status por request ATTRIBUTE_MSGV3 has not yed been set". To correct this applies note 11163109, which stated in its description as follows "..
"Implement this correction as described below. Note that this correction only improves the log message and ensures that request ID is issued. It does not correct the actual cause of the message. *To correct this, the application programing interface (API) for confirming the status of the third party tool must be called for the relevant request."*.
But I still have problems, only change message.
When I run the chain errors still occur. For example I'm running a chain with request ID 2759 and gives me the following message which refers to a previous request ID 2756. The message is as follows
Request Number 2759.
0 DataRecords
Runtime 10 sec.
Run N°1
     0 Data Records
     Runtime 10 Sec.
   Messages for Run
     Extraction is running
     "The 3rd party status for request 2.756 has not yet been set"
     Request 2.759: Error ocurred
Some guidance on how to interpret this message?
Early Thanks,
Cristián.

hi,
hope the previous delta of this infospoke might got failed. set the delta administration of the infospoke to red and start the fresh delta.
Ramesh

Similar Messages

TS3694 i need help!!! my iphone 3gs keeps turning off once every 2-3 months or so, but now i cant fix it!! i have it stuck in recovery mode but everytime im about to finish with the process error -1 comes up!!! please heellpp!!!

i need help!!! my iphone 3gs keeps turning off once every 2-3 months or so, but now i cant fix it!! i have it stuck in recovery mode but everytime im about to finish with the process error -1 comes up!!! please heellpp!!!

If the iPhone was hacked or jailbroken, can't be discussed.
If no, see post above ^^.

Scheduling failed with ATP processing error

Hello All, We are facing an issue where in scheudling failed with error code 23. CAn somebody please provide few pointers on what to check on this and what could cause this issue. Below is the error: ATP Processing error Order Number :100065681 Line Number :1.1 Message: One of the group attributes failed your scheduling attempt. We need any pointers on this on priority . Appreciate your response asap on this .

Hi,
We got the issue and the root cause was the one of the option item linked to another option line which was already cancelled and when CTO scheduling process checks the BOM based on linking it was not able to find that option line among opened one and it was failing.
Thanks,
Abhishek Sharma

Cannot communicate with system processes error

Hello,
It seems after S159 our IDS's started refusing any config updates/remote logins and returning "cannot communicate with system processes" shortly after login and then disconnecting the session. I see there are some patches available on TAC.
I can't tell if the IDS has any of these patches or not. It reports 4.1-4 Should the IDS report a version with a letter of the patch if it has any installed. Also, does this problem sound like the out of memory bug I have seen mentioned before? The memory usage on the sensors reports 98%
Any help is appreciated!

The only indication of a patched sensor is the status list of components, like Analysis Engine. Instead of "(Release)" it will have the patch version.
Yes, this could be the out of memory issue that can occur during a sigupdate.
NOTE: the memory usage portion of show version in 4.x is incorrect because it does not take into account the OS cached memory that is available for use. It may show that most of the memory is used when actually there is plenty available.

Problems Accessing Gracenote CDDB: "HTTP Processing Error" Help Please

I'm hoping for a bit of help here people, having a few problems I would be grateful for your assistance with!
I've been having trouble accessing Gracenote for a couple of months now. What was happening was that when I tried to search for the CD info on Mediasource, the gracenote icon would appear in the top left corner, and the screen loading as if obtaining the info, but then nothing happens and the info is left blank.
I have tried everything I know, and everything that has been suggested here! I have altered the ZoneAlarm settings, deleted the cddb file, checked that the settings in Mediasource are correct, downloaded the latest drivers, re-registered for gracenote manually and various other things. None of these have solved the problem.
Finally, I decided to completely re-install Creative Mediasource. After doing this, I tried to access gracenote again, and was asked to re-register. I did this, but then recieved an error message stating "Internal Socket Error". THis happened a couple of times, before the message was replaced with "HTTP Processing Error", whenever I try to access gracenote. It still will not recognise the music!
Basically, I am at the end of my knowledge and the end of my patience!!! I really don't know what more to do and so I'm throwing this open to you guys - any help would be so, so appreciated! The only this I can think is that my dad got an ipod two months ago, and has installed itunes on the PC. From what I understand, that uses gracenote too - are the two programmes clashing? If so, can anyone suggest a way I can alter this?
You're my last hope before I'm condemmed to a lifetime of filling in CD's by hand!!! I'll be really grateful if any of you guys can help me out!
Thanks!
David

Try delete the file "cddb.db" or/and "cddb.ds" (if they exist) under the directory "C:\Documents and Settings\YourName\Application Data\Creative\NetContent\MediaSource". See whether it hel
ps.
If the above does not help, then try the following:- Go to Start->All Programs->Accessories->Command Prompt. - Run the following commands in the command line to unregister the files: cd "C:\Program Files\Creative\Shared Files" CTRegsvr /u CDDBControlCreative.dll CTRegsvr /u CDDBUICreative.dll CTRegsvr /u CTCDDB.nco CTRegsvr /u NetCoMgr.nco- Run the following commands in the command line to register the files: CTRegsvr CDDBControlCreative.dll CTRegsvr CDDBUICreative.dll CTRegsvr CTCDDB.nco CTRegsvr NetCoMgr.nco

Process chain creation: error:

Hi,
i am creating process chain for the data upload of three info packages!
Two are master data IPs and one is transactional data IP. ( Requirement is to make single process chain for the master data and transactional data ).
Before transactional data upload, i had included the process delete indexes.
When i check the process chain, it says:
"process DROPCUBE variant is referenced but not in the chain "
May i know what is wrong with this process flow? i had actually done similarly in dev system it was not giving any error:
Please suggest me
Thanks,
Ravi

Hi Ravi,
Did you go for Meta chain, if not please try that. Be a bit clear on the question.
regards,
ashok.

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Process Chain Failed Error

Hi All,
Following is the error in process chain, please let me know the approch to resolve the issue
Source system: CRM
Batch job cancelled with following error
Job cancelled after system exception ERROR_MESSAGE
The following is the error in process chain
Process Attribute Change Run, variant has status Ended with errors (instance STRU_E0F3RXKBGPIRKR9NQCU2J7HLQ)
The action is locked by a change run.
Regards
Kareena

Hi,
Usually a BI_STRU job runs in either of the two case mentioned below:
1> Either you are manally pushing packets of a failed load may be because of lock or sid.
2> When you manually run a ACR by selecting specific info objects in rsattr transaction.
Now failing of a STRU job means the object is either locked that could be tracked in SM12( if you know the corresponding job for which the job was running).
Usually an ACR if fails in between locks all the acquired objects , the failure could be checked either in sm37 with job name prefix BI_ATTR, or in RSATTR and detail in SLG1, it could be traced in se38 too using program RSDDS_Changerun_monitor in BI 7.0 and even could be restarted from there.
For getting more information on which all objects are locked by the ACR you can use funtion module in rsdds_aggr_mod_state_get in transaction se37 too.
Hope this will be expedite.
Thax & Regards
Vaibhave Sharma.
Edited by: Vaibhave Sharma on Aug 31, 2008 9:28 PM

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

Process chain Transport error in BI7

Hello All,
              We are facing an error while importing a transport request in the BI7 system. The objects collected in the transport request are
InfoPackage
Process chain
Process variants
Table Contents
The error which we are facing is as follows,
Start of the after-import method RS_RSPC_AFTER_IMPORT for object type(s) RSPC (Activation Mode)
Version 'M' of chain LAP_ROM_CS_LOAD_DAILY was saved without checking
Results of check for process     in chain :
Results of check for process     in chain :
Results of check for process LOADING ZPAK_3GBB2YPFIQL01BW1IDLUNON45 in chain LAP_ROM_CS_LOAD_DAILY:
Kindly let us know if you had faced similar problem before.
regards,
Chandran

Hi Chandran,
I think that if you expand the transport/import log further there will be a more detailed error message. Can you
check this? If yes can you let us know what the error message text and error code is? It might be the case that
the note 659160 is relevant for the problem.
Best Regards,
Des.

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

Webutil error "unable to communicate with runtime process."

Hi,
Yesterday I configured webutil with Developer 10g (9.0.4).
I used webutil_106.zip and jacob_18.zip.
I succesfully deploy a form that display the selection file dialog with the function:
CLIENT_GET_FILE_NAME
Today I tried to test again the form, and I got an error when the form is opening, I review the log and I find "unable to communicate with runtime process.".....
I didn't change any configuration... what I'm doing wrong..... It just work great yesterday!!!!
I tried signing again the jacob.jar and frmwebutil.jar files..... However I still have the error.......
Any help is welcome....
The error in the log:
09/03/25 10:57:45 Started
09/03/25 10:57:55 forms90web: jsp: init
09/03/25 10:57:55 forms90web: f90servlet: init
09/03/25 10:57:55 forms90web: FormsServlet init():
configFileName: c:\dev10g/forms90/server/formsweb.cfg
testMode: false
09/03/25 10:57:55 forms90web: 9.0.4.0.0 Started
09/03/25 10:57:56 forms90web: l90servlet: init
09/03/25 10:57:56 forms90web: ListenerServlet init()
09/03/25 10:58:02 forms90web: Forms session <1> aborted: unable to communicate with runtime process.
09/03/25 10:58:02 forms90web: Forms session <1> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
     at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
09/03/25 11:00:58 forms90web: l90servlet: destroy
09/03/25 11:00:58 forms90web: 9.0.4.0.0 Stopped
09/03/25 11:00:58 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
Edited by: Santiago on 25/03/2009 11:23 AM

I Find the way, It's OK now.
When I use the webutil.olb in a form. I chose "Subclass", It's necessary to choose "Copy".

Text/html processing error with Acrobat Reader when sending to database

Hi everyone,
I have a problem that occurs in certain versions of the Acrobat Reader, with Acrobat Professional the error message does not pop up.
In Acrobat Reader however, when sending the form to a php file to fill a database an error pops up
"Content type text/html couldn´t be processed"
Nevertheless it works fine, except the fact that the confirmation "successfully sent" that should pop up (and does in Acrobat Professional) does not appear due to this processing error. What can I do?
Thanks for supporting!

Hi,
I'll only attempt the first part:
See this discussion where event.target.path.toString().substring(0, 4); was used to get the first four letters of the path. If that equalled "http", then the form was opened in a browser.
http://forums.adobe.com/message/2840942#2840942
I can't contribute on the other issues.
Niall

InfoSpokes with Chain Processer Error.

Similar Messages

Maybe you are looking for