Infoty 0017 End Date shall it be 31.12.9999 or the actual trip end date

Hi experts,
While makinga an entry with 31.12.9999 in IT0017 & tring to maintain the expense sheet in ESS system does not allow us to maintain it.
But while changing the date to actual end date of the trip system allows us to go ahead.
Please let me know what is the way forward.

Dear Sarika,
Info-type 0581 works as the start date as the hiring date or the date your are opting for HRA exception with the end date as 31.12.9999. When you create another record from a particular date it will delimit the old record and create a new record from that date to end date 31.12.9999.
It is not different for different PSA, might be there is another record which will be valid after the end date you are trying to give. But the end date will always be 31.12.9999 till the record is delimited or the person is terminated.
Regards,
Prateek

Similar Messages

Need to update the actual start date & time of a operation in workorder

Hi Experts,
I need to update the Actual Start date and Actual start time of a Operation of a WorkOrder through a Function Module.
I was looking into the BAPI_ALM_ORDER_MAINTAIN FM, but i couldn't find any field relating to the actual start date and start time of a operation.
Kindly Suggest me which Function module i can use to complete my task.
Thanks in Advance
bye

Hi,
It is system's standard behavior and no other MRP type will help you in moving the start date outside the planning time fence. With MRP type P3 new requirements are covered at the end of the fixing period, the end date is set and planed order is scheduled backword. Hence the start date will lie within the planning time fence.
Rgds,

A good solution to set the actual data record after execute query ..

Hi,
in my Form there is a block on a temporary table.
The user can add query results and wishes to save the last data focus on the last actual record before the execute query to restore this focus after the query.
Is there a robust and fast solution to save the
actual data focus - execute_query - restore the saved focus ?
Thanks
Friedhold

Here is a simple solution to try:
Create a package specification in your form: Package P0 is
Save_rowid varchar2(30);
Found_rec number;
End;Create a Key-Entqry trigger on your block: P0.save_rowid := :Myblock.rowid;
P0.Found_rec := null;
Enter_Query;Create a Post-Query trigger on the block: If :Myblock.rowid = P0.save_rowid then
P0.found_rec := :system.trigger_record;
End if;Create a Key-Exeqry trigger on the block: Execute_Query;
If P0.found_rec is not null then
Go_record(P0.found_rec;
End if;

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

Date/Time of the actual production in REM

Hi experts,
In REM, we need to confirm the actual date/Time of the beguining/End of production in MFBF.
What i have to do?
Thnaks in advance.

Hi,
This requirement is not possible in REM.
You need to do the Backflush periodically, start and end of Production is not possible..
Regards,
Siva

Bringing the actual cost (splitting among activity type) using 0co_om_cca data sources

Hi expert,
I'm using the data source 0co_om_cca_9 to bring the cost center data but the actual data is not being split per fixed and variable cost.
I've checked with CO team and the process to split the cost happens in the end of the month and it record the data with value type '3' in the covp table but the standard data source 0co_om_cca_9 just get the data with value type '4'.
Does someone know a standard datasource to bring the data with value type 3 from covp?
Thank you.
César Sevilha.

Hi César,
Please check if DataSource 0CO_OM_CCA_2 can deliver what you need.
Best regards,
Sander

How to get the actual data in ALV report

I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

So, I've got formscentral and i have my responses, but is there a way i can view the actual form that was submited, i.e. I need the actual data to be in the forms format

I've created a form for my club members to submit online. This works really great and I have all the data that I need in the excel sheet BUT I need to reprint the actual form that the members submitted. How do I do that?
Regards

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

In Aperture 3.4 Export Slideshow to a video, what are the actual Data Rates used for "Best", "High", ... "Least" quality for a given resolution?

My Photo website host (SmugMug) converts uploaded video files at a specific Data Rate in Mbps before installing them. I would like to compress my slideshow video file to the same rate before I upload it to reduce file size and upload time. When I choose the "Custom" setting for an Export, I can choose 1 of the 5 Quality choices and see the estimated file size. But, I cannot know what the actual Data Rate is until after I wait a long time to export the slideshow (hours for a long slideshow) and then examine the resulting file in QuickTime Player's Inspector.

I ran a few tests using a short slideshow (16 images, 1:23 mins/secs) at 1,728 x 1,080 resolution to find out the bit rates for various quality level choices.
Export setting              Quality          Resulting bit rate          File Size
HD 1080p                    default                20.68 Mbps              214.8 MBytes
Custom                       Best                   20.49                       212.8
Custom                       High                     6.25                         65.0
Custom                       Medium                3.97                         41.3
However, I don't know if those bit rates will be the same for different length slideshows or for different output resolutions. My SmugMug host site uses an 8.0 Mbps rate for a 1728 x 1080 video file. If I choose Custom/Best, my file will be almost 3 times bigger and much higher quality than necessary, but if I choose Custom/High, my file will be smaller and lower quality than SmugMug's converted version.
I have installed MPEG StreamClip that will let me convert an exported Aperture slideshow video file, and StreamClip allows me to choose a specific bit rate in Mbps. But, I would prefer not having to do a 2 step process (Export from Aperture, then convert in StreamClip).

Accidentally deleted iTunes, is there anyway I can download it again and have it just back up my iPod instead of clearing it of all data? All of iTunes files are still on my computer, but the actual program got deleted.

I was trying to clear space on my C drive and decided to delete programs that I didn't use or that I didn't recognize. (Bad idea, I know that now.) Anyways, accidentally deleted a program that iTunes needed to run and the computer said it would undo the uninstall and restart to fix the problem but when it restarted iTunes was gone. So my question is, after I download iTunes again, is there a way I can just backup my iPod to it's last sync (which was coincidentally right before I accidentally deleted iTunes) instead it being cleared of all its data? All of iTunes' files are still on my computer except the actual program itself.

Hi, InsaneCharlie.
Thanks for the question. I see you have uninstalled iTunes and want this program back. Start with completely uninstalling iTunes if present and all of it's components in the order specified in the article below. Once this is done, download and install iTunes. If none of your data was modified in the iTunes media folder, then your data should be present upon installation.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If you experience issues during installation, see the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
Jason H.

How to set the Reverse date to be the same as the Actual GI date by default

Hello,
On VL09 (reverse goods movement) screen, default reversal date is the system date.
Users have to select the line, click on define date button and enter the correct cancellation date to the local date field on the pop-up.
I want the reversal date on VL09 screen to be the same as the Actual GI date by default.
Thank you.

Hi,
I checked the program.
Check in routine FORM insert_data_for_reversal ---> IF Condition (( xlikpukwa-wbstk EQ charc AND xlikpukwa-vbtyp CA vbtyp_lief ) OR ( xlikpukwa-wbstk CA 'BC' AND xlikpukwa-vbtyp CA vbtyp_liav ). ---> 2 performs are there one with '01' and other with '02' as actual parameters.
In your case '01' is passing to the routine. if you try to pass '02' u can achive your requirement.
For testing in debug mode pass FIELDS-FIELD_ATTR = '02' for field name DATLO. then you can see the output.
Try to handle this problem using Enhancement Operations.
Hope this helps you.
Thanks
Raghavendra

Date modified/Date Created/Date Added(timestamp) - not showing the actual date?

In finder, none of the date info seems to be accurate.
By example, I just downloaded a new app from a website (onyx in this case), todays date is Nov 13th and when I install the new app (i.e. drag and drop into Apps folders) in finder the Date modified says Nov. 1st, Date created says October 31. Should one of these columns not reflect the true date that the app actually got onto my mac? I understand that one of these clumns probably relfects the info contained within the downloaded app, but surely one column can tell me that I installed this app on November 13! The "Last opened" columns is the only "accurate" date column I have. (as I write this however, i've noticed that the 'Date Added column does say "Today").
I gues my question is what columne reflect what the file itself has imbedded in it, and what relfects the actions i've done (I.e. installed the app on Nov 13)
Any help would be very much appreciated. Note sure if this is somehting more worrisome or not, but i've had it for a while with no major issues other than frsutration of not understanding this. i'm on 10.7.2

The Date Modified column for the Applications folder itself will reflect the actual installation date. The others aren't supposed to.
(61530)

Can NOT cancel/Reverse GI with a date before the actual GI date

Hi
can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
thanks

>
jo jo wrote:
> Hi
>
> can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
> thanks
Hi Jo Jo,
I am not sure if i understand your problem correctly.
As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
Hope it helps.
Post furthur if i had misunderstood your problem.
Regards
Abhishek

Is there currently a way to change this back to displaying the actually date and

New helpdesk in version 7.4 seems to have gone back to using '1 week ago', '2 months ago' time stamps for ticket comments.
Is there currently a way to change this back to displaying the actually date and time?
This topic first appeared in the Spiceworks Community

New helpdesk in version 7.4 seems to have gone back to using '1 week ago', '2 months ago' time stamps for ticket comments.
Is there currently a way to change this back to displaying the actually date and time?
This topic first appeared in the Spiceworks Community

Infoty 0017 End Date shall it be 31.12.9999 or the actual trip end date

Similar Messages

Maybe you are looking for