Infotyp 1001 with 'S' - 'A008' - HR IDOC

Hello!!
How to fill a vacant of the employed with the IDOC HRMD_A07?
I have filled the infotyps 1001, with S - P A008 and segment 1007 with status = 2, but the vacant is open at PPOME.
After IDOC process, the PP01 transaction shows the relationship 1001 and 1007 opened and permit the manually filler of the vacant, but, when the execution is by the IDOC, it doesn't work with success.
Regards,
Sandra

Hello,
We are running into the same problem. We are using an extension on the IDOC HRMD_A06. Cannot import IDOC definition retreiving next error:
YGL_OXYGEN.HRMD_A06.YHRMDA06: Error
+ Error: IDoc type YHRMDA06 contains errors (unable to read segments)
+ Error: IDoc type HRMD_A06 contains errors (unable to read segments)
Import failed with 1 error.
Any one faced the same problem and knows a solution for this??
Kind Regards,
Emile

Similar Messages

EREC: An error occurred when you tried to insert infotype 1001 in IDOC

Hello Experts,
I have standalone e-Recruitment system and separate SAP HR system. I have ALE configuration done to talk both system.
In the Initial Transfer, I ran PFAL in HR system in 5 steps.
Step 1 Execute PFAL (RHALEINI)for Obj Type O, Infotype 1000 and Transfer mode as Update mode
Step 2 Execute PFAL (RHALEINI)for Obj Type S, Infotype 1000 and Transfer mode as Update mode
Step 3 Execute PFAL (RHALEINI)for Obj Type O and Transfer mode as Insert
Step 4: Execute PFAL (RHALEINI)for Obj Type S and Transfer mode as Insert
Step 5: Execute PFAL (RHALEINI)for Obj Type P and Transfer mode as Insert
All IDOC created in update mode (Step 1 & 2) are green in receiving e-recruitment system but IDOC getting create in Insert mode (Step 3 ,4 &5) are in status 51/52 I mean Red.
Error messages are as below:
1) An error occurred when you tried to insert infotype 1001 using RH_INSERT_INFTY (return code 3).
2) You tried to create a relationship from object 01S 76037685 to object 01AGC:R3HCM:OM_DISPLAY_US. However, object 01AGC:R3HCM:OM_DISPLAY_US does not exist or is not active in the period from 20110101 to 99991231
3) You tried to create a relationship from object 01O 10840305 to object 01O 10299323. However, object 01O 10299323 does not exist or is not active in the period from 20110101 to 99991231.
@ 3rd message : Object 10299323 exist but I still don't understand why I get this message.
Please provide valuable suggestion so that I can get rid of this error in IDOC
Appreciate your help.
Regards,
Krishna Bidwai
Losangeles USA.
818 527 0204.
Edited by: krishna bidwai on Aug 22, 2011 7:19 PM

Dear Krishna,
Hope you are doing good.
I know its very late in getting into this conversation. Since I am also experiencing the same issue, i need some inputs from you.
The error you posted on the top is same what i am getting when I am doing data transfers from SAP HR to E-Rec systems. Our iDoc is working file in Development server but not in Quality server. I am experiencing the same errors what you have mentioned above.
When i checked the error, this error has occurred in subroutine read_namtb for structure of infotype.
Proceedure is to Check the entry for infotype in table T777D (structure, IDoc segment,
expanded structure) and the corresponding structures.
As you have resolved this issue before, can you please suggest what needs to be maintained in the tables such as T777D, T777E, and T777Z.
Appreciate your valuable inputs on this.
Thank you.

Error message 'insertion of infotype 1001 (return code 3)'

Hello,
I have an IDoc containing many object like 'CP' and 'S' with their IT1001 relationships in UPDATE mode.
While posting the IDoc, it's going into 51 status with error message 'Error: insertion of infotype 1001 (return code 3)'.
Could you help me any possible solution?
Thanks.

Hello,
The IDoc contains IT1001 relationships in update mode of Object type 'S' and 'CP'.
There is no structural issue with the IDoc contents.
Is there any other specific issue?
Thanks.

Segment E1PITYP occurs for each subtype of Infotype 1001 in update mode

Hi,
I am using transaction PFAL and IDoc HRMD_A for transferring HR data.
In update mode the resulting IDoc contains segment E1PITYP for each subtyp (for example A002) of Infotype 1001 even if it contains no segments of type E1P1001.
Could somebody explain this and is it possible to avoid this behavior?
Thanks and regards
Patrick

Hi,
thanks for your answer.
Still I am little bit confused and want give an more detailed description of my problem.
If I export an organizational unit in initial mode I have for example 5 segments of type E1PITYP and each of them has a subsegment (for example E1P1001).
Export of the same organizational unit in update mode results in more than 200 segments of type E1PITYP and all of them without subsegment.
This seems to happen for all infotypes (not only 1001 like I thought before).
Now I want to understand why this happens and if it's possible to update an organizational unit without segments of type E1PITYP that don't have a subsegment.
Regards
Patrick

Infotype 1001 skipped due to lack of authorization

Hi,
I am using PP03 for maintaining Organisation Unit relationship with Cost Center,but i am getting this Information message.
Althouhg i have * in PLOG object in authorsation.
Please let me know where would be the problem.
THanks,
Viru

Hello,
Authorization check failed
bject Class HR   Human Resources
Authorization Obj. PLOG       Personnel Planning
   Authorization Field INFOTYP Infotype
                                                                                1001
   Authorization Field ISTAT Planning Status
                                                                                1
   Authorization Field OTYPE Object Type
                                                                                S
   Authorization Field PLVAR Plan Version
                                                                                01
   Authorization Field PPFCODE Function Code
                                                                                INSE
   Authorization Field SUBTYP Subtype
                                                                                <Dummy>
Check if this is the case if your metting the message.
Regards,
Regi ALex

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

Event for infotype 1001 updates doesn't trigger

Hi everyone,
I'm facing the following problem at HR Workflow
I've created the object ZEHSBUS900, subtype of PDOTYPE_SH. And so, created two events: NOTIFYCREATE and NOTIFYUPDATE.
At SWEHR3 transaction, I have this two entries:
S Position 1001 Relationships A003 Belongs to INS 0 ZEHSBUS900 NOTIFYCREATION
S Position 1001 Relationships A003 Belongs to UPD 0 ZEHSBUS900 NOTIFYUPDATE
But when I create or update an infotype 1001, only the NOTIFYCREATION is triggered. I mean, the UPD operation doesn't work.
What is stange is that I've made this kind of implementation at another system and it's working fine ( a creation at 1001 triggers NOTIFYCREATION and modifications trigger NOTIFYUPDATE ).
Do you know what could be missing?
Thanks in advance,
Raphael Xavier

Hi Abdullah!
Thank you for the tip, but it still doesn't work this way. As what I've said before, what is strange is that problem occurs in one system and didn't occur in another one, and the same procedure was used in both.
What I did to "solve" this was using a function instead calling the event at SWEHR3. In this function there is a verification if it is an insert ou update operation and then a call to the function SWE_EVENT_CREATE.
It wasn't the best solution, but still was a solution.
If anyone has any idea what it can be, I'm still interested about it.
Raphael

How to get the report to relaionship from infotype 1001.

Hi,
Could any one just let me know regarding how to get reports to relationship for the particular employee number from infotype 1001.
What exactly are the aprameters involved.
Thanks in Advance ,
Irfan Hussain

Hi Irfan,
SELECT abkrs
         pernr
         ename
         gsber
         begda
         persg
         persk
         werks
         btrtl
         plans
         kostl
         orgeh
     INTO TABLE it_0001
     FROM pa0001
   loop at it_0001.
    CLEAR: l_plans, l_sobid, l_sobidx, l_pernr.
    SELECT SINGLE sobid INTO l_sobid
      FROM hrp1001
     WHERE otype = 'S'
       AND objid = it_0001-plans
       AND plvar = '01'
       AND relat = '002'
       AND endda = '99991231'.
    IF sy-subrc EQ 0.
      l_plans = l_sobid.
      SELECT SINGLE sobid INTO l_sobidx
      FROM hrp1001
     WHERE otype = 'S'
       AND objid = l_plans
       AND plvar = '01'
       AND relat = '008'
       AND endda = '99991231'.
      IF sy-subrc EQ 0.
        l_pernr = l_sobidx.
        SELECT SINGLE ename INTO <b>it_0001-repto</b>
          FROM pa0001
         WHERE pernr = l_pernr.
        IF sy-subrc EQ 0.
         MODIFY it_0001 INDEX l_index TRANSPORTING repto.
        ENDIF.
      ENDIF.
    ENDIF.
   endloop.
Regards,
Raj

Function module for access OM Data from infotype 1001

We had a function module for accessing OM data viz. Infotype 1001. Could you let me know.
Advanced thanks,
Dasaradh kosana

Hi Dasaradh,
Do you want the fm which fetches the data from HRP1001 , if this is the case you can use this FM RH_READ_INFTY_1001.
Reward Points if it is helpful
Regards,
Kiran I

How to create infotype 1001

Hi experts,
I am doing some configuration in accouting and an error pops up indicating infotype 1001 is not maintained. As I know very little about HR module so I just try to create infotype 1001 in PA30 but turn out it can not be maintained there. Could any body tell me how to maintain this infotype.
Thanks,
Tony

Hi Tony,
You can go to PP01, select the otype, type in the objid and create 'Relationships' infotype which is infotype 1001.
Through transaction OOVK, you can find out what all relationships have to be created for an object. Some of these can be maintained through PP01, some cannot be (selecting the relationship subtype and then allowed relationships -> not maintainable flag).
Basically, you need to find out that for which relationship (subtype of infotype 1001) it is sayin that 1001 is not maintained. Then you can go and create only that relation in PP01.
Regards,
Neha

How to assign function module with process code in IDOC ?

how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?

Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed

Detail steps in dealing with Web Service to IDoc

Dear All,
Iam dealing with Web Service to IDoc Scenario . I want detail steps like how to proceed from start to end of this scenario. Please do the needful.
Thanks & Regards,
Sarat

Hi Sarat
Just try these
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi - Invoke Webservices using SAPXI
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/336365d3-0401-0010-9884-a651295aeaa9
Reward points if useful

Functiopn module associated with basic type of idoc without process code

can i know the function module assciated with basic type of idoc if i do not know the process code for the same

hi saurabh,
download.oracle.com/docs/cd/B10464_05/integrate.904/b10299/intro.htm
    CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
      EXPORTING
        master_idoc_control                  = wa_edidc
      TABLES
        communication_idoc_control           = it_edidc
        master_idoc_data                     = it_edidd
EXCEPTIONS
    ERROR_IN_IDOC_CONTROL                = 1
    ERROR_WRITING_IDOC_STATUS            = 2
    ERROR_IN_IDOC_DATA                   = 3
    SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
    OTHERS                               = 5
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
i think this will help u
regards,
sindhu.

IT2001 error, no time constraint reachion for infotype 2001 with tm const00

Dear Seriors,
When I try to add any absence, it show the below given error message (red colour), but if I hit the enter button it allows me to mark absence.
no time constraint reachion for infotype 2001 with time constraint class 001
What might be the reason?
Regards
ET

The time constraint class is used to check for collisions between Time Management infotypes (2001 to 2012). It allows you to specify different regulations for checking for collisions between individual subtypes.
The views Time Constraint Reaction to Time Management Infotypes (V_554Y_B) and Global Time Constraint Reaction (V_T554Y) contain rules for the collision check.
Please explore on this.

No time constraint reaction for infotype 2005 with time contraint class 00u2019

Hi,
We have a incident wherein employee is trying to put overtime, IT 2005 for the period when he is on standby IT 2004. It gives error u2018No time constraint reaction for infotype 2005 with time contraint class 00u2019.
Can anybody help?

Hi,
Please maintain table V_554Y_B for 2005 TC class 00 and 2004 infotype.
Regards,
Dilek

Infotyp 1001 with 'S' - 'A008' - HR IDOC

Similar Messages

Maybe you are looking for